please respond quickly
(a) Explain in your own words what is meant by active and passive sensors. Give an example of each type of sensor. [4 marks] (b) A thermometer is regarded as a first-order instrument where a time dela

Answers

Answer 1

(a) Active and passive sensors have a crucial role to play in the world of sensor technology. (b) A thermometer is regarded as a first-order instrument where a time delay is inherent, thereby making the device a passive sensor.

Active sensors transmit energy into the environment, then detect and measure the energy that reflects back. Passive sensors only detect incoming energy that is emitted from the environment. An example of an active sensor is radar, which transmits radio waves and listens for echoes back to detect the location of objects. An example of a passive sensor is a thermometer that reads the temperature without actively transmitting energy.

(b) A thermometer is regarded as a first-order instrument where a time delay is inherent, thereby making the device a passive sensor. A first-order instrument has a linear response, and it typically lacks precision. Passive sensors like thermometers rely on natural energy sources to measure temperature, such as the thermal energy emitted by an object. They only detect energy that comes to them and do not transmit energy like an active sensor would.

Detached sensors distinguish energy transmitted or reflected from an item, and incorporate various kinds of radiometers and spectrometers. The majority of passive systems utilized in remote sensing work in the microwave, visible, thermal infrared, and infrared regions of the electromagnetic spectrum.

Know more about passive sensors, here:

https://brainly.com/question/32616536

#SPJ11


Related Questions

Magnetic Field on the Axis of a Circular Current Loop Problem Consider a circular loop of wire of radius R located in the yz plane and carrying a steady current I as in Figure 30.6. Calculate the magnetic field at an axial point P a distance x from the center of the loop. Strategy In this situation, note that any element as is perpendicular to f. Thus, for any element, ld5* xf| (ds)(1)sin 90° = ds. Furthermore, all length elements around the loop are at the same distancer from P, where r2 = x2 + R2. = Figure 30.6 The geometry for calculating the magnetic field at a point P lying on the axis of a current loop. By symmetry, the total field is along this axis,

Answers

The net magnetic field on the axis of the circular current loop is given by B=(μ0IR2/2)(x2+R2)-3/2 This is the required expression for the magnitude of the magnetic field on the axis of a circular current loop at a point P which is at a distance x from the center of the loop.

Magnetic field on the axis of a circular current loop at point P which is at a distance x from the center of the loop is calculated by the Biot-Savart law. The magnetic field is given by [tex]B=(μ0/4π)∫dl×r/r3[/tex] where r is the distance between the current element and the point P.

Magnetic field direction is perpendicular to the plane of the loop on the axis of the loop. Let us now find the expression for the magnitude of magnetic field on the axis of a circular current loop.

The geometry for calculating the magnetic field at a point P lying on the axis of a current loop

Let us take the Cartesian coordinate system such that the center of the circular loop is at the origin O. Then the position vector of the current element is [tex]r’=Rcosθi+Rsinθj[/tex] and the position vector of the point P is [tex]r=xk[/tex].

Then the vector r’-r is given by r’-[tex]r=Rcosθi+Rsinθj-xk[/tex]

=(Rcosθi+Rsinθj-xk)

Now the magnitude of this vector is [tex]|r’-r|=√[(Rcosθ-x)2+(Rsinθ)2][/tex]

Then, the magnetic field dB due to this current element is given by [tex]dB=μ0/4π dl/r2[/tex]

where dl=I(r’dθ) is the current element. Now the vector dB can be expressed in terms of its x, y and z components as follows:

[tex]dB=μ0/4π dl/r2[/tex]

=μ0/4π I(r’dθ)/r2 (Rcosθi+Rsinθj-xk)/[R2+ x2 -2xRcosθ+R2sin2θ]

Taking the x-component of dB we get

dB Bx=μ0I[Rcosθ(R2+x2)-xR2cos2θ-R2x]/[4π(R2+ x2 -2xRcosθ+R2sin2θ)3/2]

Integrating the x-component of dB from θ=0 to θ=2π

we get

[tex]Bx=∫dBBx[/tex]

=∫μ0I[Rcosθ(R2+x2)-xR2cos2θ-R2x]/[4π(R2+ x2

-2xRcosθ+R2sin2θ)3/2]dθ=0

Therefore, the net magnetic field on the axis of the circular current loop is given by [tex]B=(μ0IR2/2)(x2+R2)-3/2[/tex]

This is the required expression for the magnitude of the magnetic field on the axis of a circular current loop at a point P which is at a distance x from the center of the loop.

To learn more about Magnetic visit;

https://brainly.com/question/3617233

#SPJ11

21.42 using cyclopentanone as your starting material and using any other reagents of your choice, propose an efficient synthesis for each of the following compounds

Answers

Cyclopentanone, C5H8O is a cyclic ketone and can be converted to various organic compounds with the help of different reagents. Thus, cyclopentanone can be used as a starting material to synthesize different organic compounds using various reagents and catalysts.

Here, efficient syntheses for three organic compounds using cyclopentanone as a starting material are given below:

1) 2-Methylcyclopentanone: It can be prepared by the reaction of cyclopentanone with isopropyl, magnesium bromide, followed by hydrolysis of the resulting product. This reaction is shown below:

2) Cyclopentylmethanol: It can be prepared by the reduction of cyclopentanone with sodium borohydride (NaBH4) in methanol. This reaction is shown below:

3) 2-Cyclopenten-1-one: It can be prepared by the dehydration of cyclopentanol, which can be prepared by the reduction of cyclopentanone with lithium aluminum hydride (LiAlH4). The dehydration of cyclopentanol can be carried out by the elimination of water molecule using an acid catalyst like H2SO4. The overall reaction is shown below.

to know more about cyclopentanone visit:

https://brainly.com/question/14919939

#SPJ11

a lens has a refractive power of -1.50. what is its focal length?

Answers

It has been determined that the focal length of the lens is -0.6667 m.

Given: The refractive power of a lens is -1.50We are supposed to find the focal length of the given lens

Solution:The formula to find the focal length of a lens is given by:1/f = (n-1) (1/R1 - 1/R2)

Given: Refractive power (P) = -1.50

As we know that, P = 1/f (Where f is the focal length)

Hence, -1.50 = 1/fOr, f = -1/1.5= -0.6667 m

Therefore, the focal length of the given lens is -0.6667 m.

From the above calculations, it has been determined that the focal length of the lens is -0.6667 m.

To know more about focal length visit:

brainly.com/question/31755962

#SPJ11

A 0.200-kg object is attached to a spring that has a force constant of 95.0 N/m. The object is pulled 7.00 cm to the right of equilibrium and released from rest to slide on a horizontal, frictionless table. Calculate the maximum speed Umas of the object. Upis m/y Find the location x of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up. m

Answers

The maximum speed of the object is Umas =  1.516 m/s. The location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x =  6.97 cm..

To find the maximum speed of the object, we can use the concept of mechanical energy conservation. At the maximum speed, all the potential energy stored in the spring is converted into kinetic energy.

The potential energy stored in the spring is given by:

Potential energy (PE) = (1/2)kx²

Where:

k = force constant of the spring = 95.0 N/m

x = displacement of the object from equilibrium = 7.00 cm = 0.0700 m (converted to meters)

Substituting the values into the equation:

PE = (1/2)(95.0 N/m)(0.0700 m)²

PE ≈ 0.230 Joules

At the maximum speed, all the potential energy is converted into kinetic energy:

Kinetic energy (KE) = 0.230 Joules

The kinetic energy is given by:

KE = (1/2)mv²

Where:

m = mass of the object = 0.200 kg

v = maximum speed of the object (Umas)

Substituting the values into the equation:

0.230 Joules = (1/2)(0.200 kg)v²

v² = (0.230 Joules) * (2/0.200 kg)

v² = 2.30 Joules/kg

v ≈ 1.516 m/s

Therefore, the maximum speed of the object is Umas ≈ 1.516 m/s.

To find the location of the object relative to equilibrium when it has one-third of the maximum speed, we can use the concept of energy conservation again. At this point, the kinetic energy is one-third of the maximum kinetic energy.

KE = (1/2)mv²

(1/3)KE = (1/6)mv²

Substituting the values into the equation:

(1/3)(0.230 Joules) = (1/6)(0.200 kg)v²

0.077 Joules = (0.0333 kg)v²

v² = 2.311 Joules/kg

v ≈ 1.519 m/s

Now, we need to find the displacement x of the object from equilibrium at this velocity. We can use the formula for the potential energy stored in the spring:

PE = (1/2)kx²

Rearranging the equation:

x² = (2PE) / k

x² = (2 * 0.230 Joules) / 95.0 N/m

x² ≈ 0.004842 m²

x ≈ ±0.0697 m

Since the object is moving to the right, the displacement x will be positive:

x ≈ 0.0697 m

Converting this to centimeters:

x ≈ 6.97 cm

Therefore, the location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x ≈ 6.97 cm.

The maximum speed of the object is Umas ≈ 1.516 m/s. The location of the object relative to equilibrium when it has one-third of the maximum speed, is moving to the right, and is speeding up is x ≈ 6.97 cm.

To know more about speed, visit:

https://brainly.com/question/30249508

#SPJ11

what hall voltage (in mv) is produced by a 0.160 t field applied across a 2.60 cm diameter aorta when blood velocity is 59.0 cm/s?

Answers

A 0.160 t field applied across a 2.60 cm diameter aorta when blood velocity is 59.0 cm/s will give Hall voltage of 2.3712 mV.

For calculating this, we know that:

VH = B * d * v * RH

In this instance, the blood flow rate is given as 59.0 cm/s, the magnetic field strength is given as 0.160 T, the aorta diameter is given as 2.60 cm (which we will convert to metres, thus d = 0.026 m), and the magnetic field strength is given as 0.160 T.

Let's assume a value of RH = [tex]3.0 * 10^{-10} m^3/C.[/tex]

VH = (0.160 T) * (0.026 m) * (0.59 m/s) *  [tex]3.0 * 10^{-10} m^3/C.[/tex]

VH = 0.0023712 V

Or,

VH = 2.3712 mV

Thus, the Hall voltage produced in the aorta is approximately 2.3712 mV.

For more details regarding Hall voltage, visit:

https://brainly.com/question/32048582

#SPJ4

a child on a merry-go-round takes 4.4 s to go around once. what is his angular displacement during a 1.0 s time interval?

Answers

The child's angular displacement during a 1.0 s time interval is approximately 1.432 radians.

To determine the angular displacement of the child on the merry-go-round during a 1.0 s time interval, we can use the formula:

Angular Displacement (θ) = Angular Velocity (ω) × Time (t)

The angular velocity (ω) can be calculated by dividing the total angular displacement by the total time taken to complete one revolution.

In this case:

Time taken to go around once (T) = 4.4 s

Angular Velocity (ω) = 2π / T

Angular Velocity (ω) = 2π / 4.4 s ≈ 1.432 radians/s

Now, we can calculate the angular displacement during a 1.0 s time interval:

Angular Displacement (θ) = Angular Velocity (ω) × Time (t)

Angular Displacement (θ) = 1.432 radians/s × 1.0 s

Angular Displacement (θ) ≈ 1.432 radians

Learn more about angular displacement here:

https://brainly.com/question/31387317

#SPJ11

The angular displacement of the child during a 1.0 s time interval is 1.44 radian. The given values are, Time taken by the child to go around once, t = 4.4 s Time interval, t₁ = 1 s

Formula used: Angular displacement (θ) = (2π/t) × t₁. Substitute the given values in the formula, Angular displacement (θ) = (2π/t) × t₁= (2π/4.4) × 1= 1.44 radian. Thus, the angular displacement of the child during a 1.0 s time interval is 1.44 radian.

The change in the angular position of an object or a point in a rotational system is known as angular displacement and it measures the amount and direction of rotation from an initial position to a final position. Angular displacement is an important concept in physics and engineering, as it helps to describe a rotational motion.

To know more about angular displacement, refer

https://brainly.com/question/31150979

#SPJ11

Water at 70 kPa and 100°C is compressed isentropically in a closed system to 4 MPa. Determine the final temperature of the water and the work required, in kJ/kg, for this compression. [Ans.: 664°C, 887.1 kJ/kg]

Answers

Final temperature of water is 664°C and work required for the compression process is 887.1 kJ/kg.

Given data:

Initial pressure P1 = 70 kPa

Initial temperature T1 = 100°C

Final pressure P2 = 4 MPa

Adiabatic or isentropic process, so heat transferred is zero, Q = 0

We need to determine the final temperature T2 and the work required for the compression process, W.

Adiabatic process is a process where there is no heat transfer, Q = 0. The energy balance equation for a closed system undergoing adiabatic or isentropic process can be written as:

dE = dQ - dW

Here, dE = Change in internal energy

dQ = Heat transferred (for adiabatic process, dQ = 0)

dW = Work done by the system

We can write the above equation in terms of specific quantities as: de = dq - dw

where, e = Internal energy per unit mass

q = Heat transferred per unit mass (for adiabatic process, q = 0)w = Work done per unit mass

We can use the entropy formula to determine the final temperature T2.S = constant

We can use the following equation for an adiabatic process:

S1 = S2

where S1 is the entropy of the water at P1 and T1 and S2 is the entropy of the water at P2 and T2.

S2 = S1 = constant

The entropy of the water can be calculated using the following equation:

s = Cp ln(T) - R ln(P)

where, s is the entropy per unit mass, Cp is the specific heat capacity at constant pressure, R is the gas constant, P is the pressure, and T is the temperature.

In our case, since the process is isentropic or adiabatic, the entropy change is zero.

Therefore, we can write:

S2 - S1 = 0Cp ln(T2) - R ln(P2) - Cp ln(T1) + R ln(P1) = 0Cp ln(T2/T1) - R ln(P2/P1) = 0Cp ln(T2/T1) = R ln(P1/P2)T2/T1 = (P1/P2)^(R/Cp)T2 = T1 * (P1/P2)^(R/Cp)

The specific heat capacity at constant pressure for water vapor can be taken as Cp = 1.872 kJ/kg K and the gas constant for water vapor is R = 0.4615 kJ/kg K.

The work done for an adiabatic process can be calculated using the following equation:

W = Cp * (T1 - T2)/(γ - 1)

where γ = Cp/Cv is the ratio of specific heats.

Cv for water vapor can be taken as 1.4 kJ/kg K.The specific work done per unit mass for the compression process can be calculated as:

W/m = W/m = Cp * (T1 - T2)/(γ - 1)We can substitute the given values in the above equations to obtain:

T2 = T1 * (P1/P2)^(R/Cp)T2 = 100 + 273.15 * (70 / 4000)^(0.4615/1.872) = 937.15

K = 664°CW/m = Cp * (T1 - T2)/(γ - 1)W/m = 1.872 * (100 + 273.15 - 937.15)/(1.4 - 1) = -887.1 kJ/kg

Work required for the compression process is 887.1 kJ/kg.

Final temperature of water is 664°C and work required for the compression process is 887.1 kJ/kg.

To know more about work, visit:

https://brainly.com/question/18094932

#SPJ11

A capacitor is discharged through a 20.0 Ω resistor. The discharge current decreases to 22.0% of its initial value in 1.50 ms.
What is the time constant (in ms) of the RC circuit?
a) 0.33 ms
b) 0.67 ms
c) 1.50 ms
d) 3.75 ms

Answers

The time constant (in ms) of the RC circuit is 3.75 ms. Hence, the correct option is  (d) 3.75 ms.


The rate of decay of the current in a charging capacitor is proportional to the current in the circuit at that time. Therefore, it takes longer for a larger current to decay than for a smaller current to decay in a charging capacitor.A capacitor is discharged through a 20.0 Ω resistor.

The discharge current decreases to 22.0% of its initial value in 1.50 ms. We can obtain the time constant of the RC circuit using the following formula:$$I=I_{o} e^{-t / \tau}$$Where, I = instantaneous current Io = initial current t = time constant R = resistance of the circuit C = capacitance of the circuit

To know more about circuit visit:-

https://brainly.com/question/12608516

#SPJ11

The time constant of the RC circuit is approximately 0.674 m s.

To determine the time constant (τ) of an RC circuit, we can use the formula:

τ = RC

Given that the discharge current decreases to 22.0% of its initial value in 1.50 m s, we can calculate the time constant as follows:

The percentage of the initial current remaining after time t is given by the equation:

I(t) =[tex]I_oe^{(-t/\tau)[/tex]

Where:

I(t) = current at time t

I₀ = initial current

e = Euler's number (approximately 2.71828)

t = time

τ = time constant

We are given that the discharge current decreases to 22.0% of its initial value. Therefore, we can set up the following equation:

0.22 =[tex]e^{(-1.50/\tau)[/tex]

To solve for τ, we can take the natural logarithm (ln) of both sides:

ln(0.22) = [tex]\frac{-1.50}{\tau}[/tex]

Rearranging the equation to solve for τ:

τ = [tex]\frac{-1.50 }{ ln(0.22)}[/tex]

Calculating this expression:

τ ≈ 0.674 m s

Learn more about time constant here:

brainly.com/question/32577767

#SPJ11

Consider a metal pipe that carries water to a house.Which answer best explains why a pipe like this may burst in very cold weather? O The metal contracts to a greater extent than the water. O The interior of the pipe contracts less than the outside of the pipe O Both the metal and the water expand,but the water expands to a greater extent. O Water expands upon freezing while the metal contracts at lower temperatures. O Water contracts upon freezing while the metal expands at lower temperatures

Answers

A metal pipe may burst in very cold weather because water expands upon freezing while the metal contracts at lower temperatures.

The reason a metal pipe may burst in very cold weather is due to the expansion of water upon freezing, combined with the contraction of the metal at lower temperatures.

When water freezes, it undergoes a phase change from a liquid to a solid state. Unlike most substances, water expands upon freezing. This expansion is due to the formation of ice crystals, which take up more space than the liquid water molecules. As the water inside the pipe freezes and expands, it exerts pressure on the surrounding walls of the pipe.

On the other hand, metals generally contract when they are exposed to colder temperatures. This contraction occurs because the colder temperature reduces the thermal energy of the metal atoms, causing them to move closer together.

When the water inside the pipe expands due to freezing, and the metal contracts due to the cold temperature, the combined effect can exert significant pressure on the pipe. This pressure may exceed the structural strength of the pipe, leading to bursting or cracking.

A metal pipe may burst in very cold weather because water expands upon freezing while the metal contracts at lower temperatures. This combination of expansion and contraction puts pressure on the pipe, potentially exceeding its structural strength. Understanding this behavior is crucial to prevent damage and ensure the proper functioning of pipes in cold weather conditions.

To know more about metal visit:

https://brainly.com/question/28183884

#SPJ11

What value below has 3 significant digits? a) 4.524(5) kev b) 1.48(4) Mev c) 58 counts d) 69.420 lols Q13: What is the correct count-rate limit of precision for an exactly 24 hour live time count with 4.00% dead time, a count rate of 40.89700 counts/second, and a Fano Factor of 0.1390000? a) 40.897(8) counts/sec b) 40.90(12) counts/sec c) 41.0(5) counts/sec d) 41(5) counts/sec e) Infinite Q14: What kind of detectors have the risk of a wall effect? a) Neutron gas detectors b) All gas detectors c) Neutron semiconductor detectors d) Gamma semiconductor detectors e) Geiger-Müller counters

Answers

The value below that has 3 significant digits is: c) 58 counts

In this value, the digits "5" and "8" are considered significant, and the trailing zero does not contribute to the significant figures. The value "58" has two significant digits.

Q13: The correct count-rate limit of precision for an exactly 24 hour live time count with 4.00% dead time, a count rate of 40.89700 counts/second, and a Fano Factor of 0.1390000 is:

b) 40.90(12) counts/sec

The value has 4 significant digits, and the uncertainty is indicated by the value in parentheses. The uncertainty is determined by the count rate's precision and the dead time effect.

Q14: The detectors that have the risk of a wall effect are:

c) Neutron semiconductor detectors

d) Gamma semiconductor detectors

The wall effect refers to the phenomenon where radiation interactions occur near the surface of a detector, leading to reduced sensitivity and accuracy. In the case of neutron and gamma semiconductor detectors, their thin semiconductor material can cause a significant portion of radiation interactions to occur close to the detector surface, resulting in the wall effect.

To know more about digits, visit

https://brainly.com/question/24491627

#SPJ11

In your own words define the following term and state its
importance for hypothesis testing (2 points correct definition, 3
points correct importance for hypothesis testing).
Null Hypothesis
Sampling

Answers

Sampling is the process of selecting a subset of individuals or items from a larger population in order to gather information or make inferences about the whole population. This method allows researchers to collect data from a smaller group, which is more efficient and cost-effective than collecting data from the entire population.

Sampling is a crucial process in research because it helps ensure that the data collected is representative of the population and reduces the potential for bias. There are several types of sampling methods, including random sampling, stratified sampling, and convenience sampling. The choice of sampling method depends on the research question, the population being studied, and the resources available to the researcher. The accuracy of the data obtained from a sample depends on the sample size and the sampling method used. A larger sample size is generally more representative of the population and reduces the margin of error, while a smaller sample size may be more susceptible to sampling bias.

Know more about population, here:

https://brainly.com/question/15889243

#SPJ11

please fast.
- 14. A 0.400 kg physics cart is moving with a velocity of 0.22 m/s. This cart collides inelastically with a second stationary cart and the two move off together with a velocity of 0.16 m/s. What was

Answers

In an inelastic collision, two or more objects stick together and travel as one unit after the collision. The principle of conservation of momentum states that the total momentum of a closed system remains constant if no external forces act on the system, which is also true for an inelastic collision.

As a result, the momentum of the first cart is equal to the combined momentum of the two carts after the collision, since the collision is inelastic. The velocity of the two carts after the collision can be calculated using the conservation of momentum, as follows:0.400 kg x 0.22 m/s + 0 kg x 0 m/s = (0.400 kg + 0 kg) x 0.16 m/s0.088 Ns = 0.064 NsThe total momentum of the system is 0.064 Ns.

The two carts move together after the collision with a velocity of 0.16 m/s. The mass of the second cart is 0 kg, therefore, its initial momentum is 0 Ns. The momentum of the first cart is therefore equal to the total momentum of the system.

The initial momentum of the first cart can be calculated using the following formula:p = mv0.088 Ns = 0.400 kg x v Therefore, the initial velocity of the first cart is:v = p/mv = 0.088 Ns / 0.400 kgv = 0.22 m/s Hence, the initial velocity of the first cart is 0.22 m/s.

To know more about inelastic collision refer here:

https://brainly.com/question/14521843#
#SPJ11

what is the best definition of relativistic thought according to perry

Answers

Relativistic thought refers to the recognition that our perceptions and beliefs are influenced by our experiences, upbringing, and cultural and social environments, according to Perry.

It suggests that reality is subjectively constructed rather than objectively discovered, and that what is "true" or "right" for one person or group may not be for another. Relativistic thinking entails a degree of tolerance for opposing viewpoints and a willingness to engage in dialogue rather than debate or dismiss opposing perspectives. Instead of seeing things in black and white, relativistic thought acknowledges the nuances and complexity of human experience and acknowledges that there may be multiple valid perspectives on any given issue.

To know more about degree of tolerance, visit:

https://brainly.com/question/32378860

#SPJ11

suppose the previous forecast was 30 units, actual demand was 50 units, and ∝ = 0.15; compute the new forecast using exponential smoothing.

Answers

By using the formula of exponential smoothing, we can get the new forecast. Hence, the new forecast using exponential smoothing is 33 units.

Given:

Previous forecast = 30 units

Actual demand = 50 unitsα = 0.15Formula used:

New forecast = α(actual demand) + (1 - α)(previous forecast)

New forecast = 0.15(50) + (1 - 0.15)(30)New forecast = 7.5 + 25.5

New forecast = 33 units

Therefore, the new forecast using exponential smoothing is 33 units.

In exponential smoothing, the new forecast is computed by using the actual demand and previous forecast. In this question, the previous forecast was 30 units and actual demand was 50 units, with α = 0.15. By using the formula of exponential smoothing, we can get the new forecast. Hence, the new forecast using exponential smoothing is 33 units.

To know more about New forecast visit:

brainly.com/question/31844712

#SPJ11

Question 1 Calculate the amount of radiation emitted by a blackbody with a temperature of 353 K. Round to the nearest whole number (e.g., no decimals) and input a number only, the next question asks a

Answers

The amount of radiation emitted by a blackbody with a temperature of 353 K is 961 {W/m}².

The formula for calculating the amount of radiation emitted by a blackbody is given by the Stefan-Boltzmann law: j^* = \sigma T^4 Where j* is the radiation energy density (in watts per square meter), σ is the Stefan-Boltzmann constant (σ = 5.67 x 10^-8 W/m^2K^4), and T is the absolute temperature in Kelvin (K).Using the given temperature of T = 353 K and the formula above, we can calculate the amount of radiation emitted by the blackbody: j^* = \sigma T^4 j^* = (5.67 \times 10^{-8}) (353)^4 j^* = 961.2 {W/m}².

Therefore, the amount of radiation emitted by the blackbody with a temperature of 353 K is approximately 961 watts per square meter (W/m²).Rounding this to the nearest whole number as specified in the question gives us the final answer of: 961 (no decimals).

More on radiation: https://brainly.com/question/31106159

#SPJ11

why did the masses of the objects have to be very small to be able to get the objects very close to each other?

Answers

The masses of the objects have to be very small to be able to get the objects very close to each other because of the gravitational force.

Gravitational force is the force of attraction between any two objects with mass. It is an attractive force that acts between all objects with mass. The strength of the gravitational force depends on the masses of the objects involved and the distance between them. When the objects are close to each other, the gravitational force between them becomes stronger. If the masses of the objects are very large, the gravitational force between them becomes very strong. This means that it is very difficult to get the objects very close to each other because of the strong force of gravity. However, if the masses of the objects are very small, the gravitational force between them becomes very weak. This means that it is much easier to get the objects very close to each other because there is less gravitational force pushing them apart.

Gravitational force is one of the fundamental forces in nature. It is an attractive force that acts between any two objects with mass. The strength of the gravitational force depends on the masses of the objects involved and the distance between them. When the objects are close to each other, the gravitational force between them becomes stronger. If the masses of the objects are very large, the gravitational force between them becomes very strong. This means that it is very difficult to get the objects very close to each other because of the strong force of gravity. However, if the masses of the objects are very small, the gravitational force between them becomes very weak. This means that it is much easier to get the objects very close to each other because there is less gravitational force pushing them apart. In general, the strength of the gravitational force between two objects is given by the formula F = Gm1m2/r^2, where F is the force of gravity, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them. As you can see from this formula, the strength of the gravitational force decreases as the distance between the objects increases.

To know more about gravitational force visit :-

https://brainly.com/question/32609171

#SPJ11

Relative to the ground, a car has a velocity of 17.3 m/s, directed due north. Relative to this car, a truck has a velocity of 23.0 m/s, directed 52.0° north of east. What is the magnitude of the truc

Answers

The

magnitude

of the truck's velocity

is approximately 22.783 m/s.

To solve this problem, we can break down the velocities into their x and y components.

The

car's velocity

is directed due north, so its

x-component is 0 m/s and its y-component is 17.3 m/s.

The truck's velocity is directed 52.0° north of east. To find its x and y components, we can use trigonometry. Let's define the

angle

measured counterclockwise from the positive x-axis.

The x-component of the truck's velocity can be found using the cosine function:

cos(52.0°) = adjacent / hypotenuse

cos(52.0°) = x-component / 23.0 m/s

Solving for the x-component:

x-component = 23.0 m/s * cos(52.0°)

x-component ≈ 14.832 m/s

The y-component of the truck's velocity can be found using the sine function:

sin(52.0°) = opposite / hypotenuse

sin(52.0°) = y-component / 23.0 m/s

Solving for the y-component:

y-component = 23.0 m/s * sin(52.0°)

y-component ≈ 17.284 m/s

Now, we can find the magnitude of the truck's velocity by using the

Pythagorean theorem

:

magnitude = √(x-component² + y-component²)

magnitude = √((14.832 m/s)² + (17.284 m/s)²)

magnitude ≈ √(220.01 + 298.436)

magnitude ≈ √518.446

magnitude ≈ 22.783 m/s

Therefore, the magnitude of the truck's

velocity

is approximately 22.783 m/s.

To know more about

magnitude

visit:

https://brainly.com/question/30337362

#SPJ11

A 100.0 mL sample of 0.10 M NH3 is titrated with 0.10 M HNO3. Determine the pH of the solution after the addition of 50.0 mL of KOH. The Kb of NH3 is 1.8 x 10-5, A) 4.74 B) 7.78 C) 7.05 D) 9.26 E) 10.34

Answers

The pH of the solution after the addition of 50.0 mL of KOH is 9.26

So, the correct answer is D.

The limiting reactant is the one that will be completely consumed in the reaction. In this case, NH₃ is the limiting reactant because it is present in a greater amount than the HNO₃.

This means that all of the HNO₃ will react with NH₃ and there will be some NH₃ left over.

To find the amount of NH₃ that will react, use stoichiometry:

1 mol HNO₃ reacts with 1 mol NH₃ 0.0050 mol HNO₃ reacts with 0.0050 mol NH₃

This means that 0.0100 mol - 0.0050 mol = 0.0050 mol of NH₃ remains after the reaction with HNO₃.

Now, find the concentration of NH₃ after the reaction:

0.0050 mol / 0.150 L = 0.033 M NH₃

Now, calculate the pOH of the solution:

pOH = -log(1.8 x 10⁻⁵) + log(0.033) = 4.74

Finally, calculate the pH of the solution:

pH = 14 - 4.74 = 9.26

Therefore, the answer is option D) 9.26.

Learn more about chemical reaction at:

https://brainly.com/question/30663464

#SPJ11

Option (c), The solution has a pH of 7.05. We are given the volume and the molarity of NH3 and HNO3 in the equation.

So, let's first calculate the moles of NH3 present in 100.0 mL of 0.10 M NH3.

The number of moles of NH3 in the solution will be: (100.0 mL / 1000 mL/L) × 0.10 M = 0.010 moles of NH3

Also, the number of moles of HNO3 in the solution will be the same because the two are reacted in a 1:1 ratio. Therefore, the number of moles of HNO3 in the solution will also be 0.010 mol. It is now time to calculate the concentration of the solution after the addition of 50.0 mL of 0.10 M KOH. Using the balanced chemical equation, KOH reacts with HNO3 in a 1:1 ratio as follows:

KOH(aq) + HNO3(aq) → KNO3(aq) + H2O(l)

Using the volume and molarity of KOH, we can calculate the number of moles of KOH in the solution as follows:(50.0 mL / 1000 mL/L) × 0.10 M = 0.0050 moles of KOH

Now we can determine the number of moles of HNO3 left in the solution by subtracting the number of moles of KOH from the original number of moles of HNO3:Number of moles of HNO3 = 0.010 - 0.0050 = 0.0050 mol

Finally, we can calculate the concentration of HNO3 in the solution using the new total volume of the solution. Since the total volume of the solution has doubled (from 100 mL to 200 mL), the molarity of the solution is halved:

Molarity of HNO3 = 0.0050 mol / 0.200 L = 0.025 M

The Kb value for NH3 is given in the question as 1.8 x 10-5. We can use this value and the concentration of NH3 to calculate the pKb as follows:

pKb = -log(Kb) = -log(1.8 x 10-5) = 4.74

The pH of the solution can now be calculated as follows:

pH = 14.00 - pOH = 14.00 - (pKb + log([NH3]/[NH4+])) = 14.00 - (4.74 + log(0.010/0.0050)) = 7.05

Therefore, the correct option is (C) 7.05.

Learn more about the molarity: https://brainly.com/question/2817451

#SPJ11

the winding of an ac electric motor has an inductance of 21 mh and a resistance of 13 ω. the motor runs on a 60-hz rms voltage of 120 v.

a) what is the rms current that the motor draws, in amperes?

b) by what angle, in degrees, does the current lag the input voltage?

c) what is the capacitance, in microfarads, of the capacitor that should be connected in series with the motor to cause the current to be in phase with the input voltage?

Answers

The capacitance, in microfarads, of the capacitor that should be connected in series with the motor to cause the current to be in phase with the input voltage is 0.33 µF.

a) We have L = 21 mH, R = 13 ω and V = 120 V

The rms current that the motor draws, in amperes is calculated as follows:Irms = V/Z

Where, [tex]Irms = V/Z[/tex]

L = Inductance = 21 m

H = 21 × 10⁻³H

f = 60 Hz

R = Resistance = 13 Ω

V = RMS voltage = 120 V

Reactance, [tex]X = 2πfL[/tex]

= 2 × 3.1415 × 60 × 21 × 10⁻³

= 7.92 Ω

Thus, Z = sqrt(R² + X²)

= sqrt(13² + 7.92²)

= 15.22 Ω And,

[tex]Irms = V/Z[/tex]

= 120/15.22

= 7.89 A

Therefore, the rms current that the motor draws, in amperes is 7.89 A.

b) The current lags the voltage by a phase angle, ϕ. This can be calculated as follows:

[tex]tan ϕ = X/R[/tex]

= 7.92/13

= 0.609

Thus, the angle is,

ϕ = tan⁻¹0.609

= 30.67⁰

Therefore, by 30.67 degrees does the current lag the input voltage.

c) The capacitor that should be connected in series with the motor to cause the current to be in phase with the input voltage is given by,

[tex]C = 1/(2πfX)[/tex]

Where, f = 60 Hz

X = 7.92 Ω

C = 1/(2 × 3.1415 × 60 × 7.92 × 10⁰)

= 0.33 µF

Thus, the capacitance, in microfarads, of the capacitor that should be connected in series with the motor to cause the current to be in phase with the input voltage is 0.33 µF.

To learn more about capacitance visit;

https://brainly.com/question/18271076

#SPJ11

The displacement of a wave traveling in the negative y-direction
is D(y,t)=(9.0cm)sin(45y+70t+π)D(y,t)=(9.0cm)sin⁡(45y+70t+π), where
y is in m and t is in s.
What is the frequency of this wave?
Wh

Answers

The displacement of a wave traveling in the negative y-direction depends on the amplitude and frequency of the wave.

The displacement of a wave traveling in the negative y-direction is a combination of factors. The first factor is the amplitude, which is the maximum distance that a particle moves from its rest position as a wave passes through it. The second factor is the frequency, which is the number of waves that pass a fixed point in a given amount of time. The displacement of a wave is given by the formula y = A sin(kx - ωt + ϕ), where A is the amplitude, k is the wave number, x is the position, ω is the angular frequency, t is the time, and ϕ is the phase constant. This formula shows that the displacement depends on the amplitude and frequency of the wave.

These variables have the same fundamental meaning for waves. In any case, it is useful to word the definitions in a more unambiguous manner that applies straightforwardly to waves: Amplitude is the distance between the wave's maximum displacement and its resting position. Frequency is the number of waves that pass by a particular point every second.

Know more about amplitude and frequency, here:

https://brainly.com/question/31863582

#SPJ11

if a dvd is spinning at 100 mph and has a radius of 14 inches, what is the linear speed of a point 3 inches from the center.

Answers

The linear speed of a point 3 inches from the center of a DVD spinning at 100 mph and with a radius of 14 inches is approximately 219.91 mph.

Linear speed is the rate at which an object moves along a circular path. It is measured in distance per unit time, such as miles per hour (mph) or meters per second (m/s).

The formula for linear speed is:

v = rω where:

v = linear speed

r = radius of the circle

rω = angular speed (measured in radians per second)

To calculate the linear speed of a point on a DVD spinning at 100 mph and with a radius of 14 inches, we need to convert the units of the given speed from mph to inches per second:

100 mph = (100 x 5280 feet) / 3600 seconds = 146.67 feet/second

146.67 feet/second = 1760 inches/second

Next, we need to find the angular speed ω of the DVD.

Angular speed is the rate at which an object rotates about an axis, and it is measured in radians per second. The formula for angular speed is:

ω = 2πf where:

ω = angular speed

f = frequency (measured in hertz)

π = 3.14159...

The frequency f of the DVD is equal to its rotational speed divided by the number of revolutions per second. One revolution is a complete turn around the circle, or 2π radians. Therefore, the frequency is:

f = (100 mph) / (2π x 14 inches x 3600 seconds/5280 feet) = 0.862 hertz

Finally, we can substitute the given values into the formula for linear speed:

v = rωv = (14 + 3) inches x 2π x 0.862 hertz = 219.91 inches/second

Therefore, the linear speed of a point 3 inches from the center of a DVD spinning at 100 mph and with a radius of 14 inches is approximately 219.91 mph.

Learn more about Linear speed https://brainly.com/question/29345009

#SPJ11

A solid surface with dimensions 2.5 mm ✕ 3.0 mm is exposed to argon gas at 90. Pa and 500 K. How many collisions do the Ar atoms make with this surface in 20. s?v

Answers

A solid surface with dimensions 2.5 mm ✕ 3.0 mm is exposed to argon gas at 90. Pa and 500 K, the Ar atoms make 4.6128 collisions with the surface in 20 seconds.

We may utilise the idea of the kinetic theory of gases to determine how many collisions the Ar (argon) atoms have with the solid surface.

The expression for the quantity of surface collisions per unit of time is:

Collisions per unit time = (Number of particles per unit volume) × (Velocity) × (Area of the surface)

Number of particles per unit volume = (Pressure) / (Gas constant * Temperature)

Number of particles per unit volume = (Pressure) / (Gas constant * Temperature)

= (90) / (8.314 * 500 K)

= 0.02154 [tex]mol/m^3[/tex]

Number of particles in the given volume = (Number of particles per unit volume) × (Volume)

= (0.02154) × (7.5 × [tex]10^{(-6)[/tex])

= 1.6155 × [tex]10^{(-7)[/tex] mol (approximately)

Number of collisions = (Number of particles in the given volume) × (Collisions per unit time) × (Time)

= (1.6155 × [tex]10^{(-7)[/tex]) × (Number of particles per unit volume) × (Velocity) × (Area of the surface) × (Time)

Velocity = √((3 * k_B * T) / M_Ar)

Velocity = √((3 * 1.380649 × [tex]10^{(-23)[/tex] J/K * 500) / (39.95 × [tex]10^{(-3)[/tex] )

≈ 1,558.45 m/s

Number of collisions = (1.6155 × [tex]10^{(-7)[/tex]) × (0.02154) × (1,558.45 m/s) × (7.5 × [tex]10^{(-6)[/tex]) × (20)

≈ 4.6128 collisions

Therefore, the Ar atoms make approximately 4.6128 collisions with the surface in 20 seconds.

For more details regarding collisions, visit:

https://brainly.com/question/13138178

#SPJ4

A charge -5.5 nC is placed at (-3.1.-3) m and another charge 9.3 nC is placed at (-2,3,-2) m. What is the electric field at (1,0,0)m?

Answers

The electric field at (1,0,0) m due to the given charges is -1.2 x 10^5 N/C, directed towards the left.

Let's first calculate the electric field at point P due to the first charge:q1 = -5.5 nC, r1 = (-3.1, -3, 0) m and r = (1, 0, 0) m

The distance between charge 1 and point P is:r = √((x2 - x1)² + (y2 - y1)² + (z2 - z1)²)r = √((1 - (-3.1))² + (0 - (-3))² + (0 - 0)²)r = √(4.1² + 3² + 0²)r = 5.068 m

Therefore, the electric field at point P due to charge 1 is:

E1 = kq1 / r1²E1 = (9 x 10^9 Nm²/C²) x (-5.5 x 10^-9 C) / (5.068 m)²E1 = -4.3 x 10^5 N/C (towards left, as the charge is negative)

Now, let's calculate the electric field at point P due to the second charge:

q2 = 9.3 nC, r2 = (-2, 3, -2) m and r = (1, 0, 0) m

The distance between charge 2 and point P is:

r = √((x2 - x1)² + (y2 - y1)² + (z2 - z1)²)

r = √((1 - (-2))² + (0 - 3)² + (0 - (-2))²)

r = √(3² + 3² + 2²)r = √22 m

Therefore, the electric field at point P due to charge 2 is:

E2 = kq2 / r2²

E2 = (9 x 10^9 Nm²/C²) x (9.3 x 10^-9 C) / (√22 m)²

E2 = 3.1 x 10^5 N/C (towards right, as the charge is positive)

Now, the total electric field at point P due to both charges is:

E = E1 + E2

E = -4.3 x 10^5 N/C + 3.1 x 10^5 N/C

E = -1.2 x 10^5 N/C

Therefore, the electric field at (1,0,0) m due to the given charges is -1.2 x 10^5 N/C, directed towards the left.

Learn more about electric field at:

https://brainly.com/question/15906502

#SPJ11

The electric field at point P (1, 0, 0)m is (-2.42 × 10⁶) î + 6.91 × 10⁶ ĵ N/C.

The given charges are -5.5 nC and 9.3 nC. The position vectors of these charges are (-3.1, -3, 0)m and (-2, 3, -2)m. We need to find the electric field at (1, 0, 0)m.

Let's consider charge q1 (-5.5 nC) and charge q2 (9.3 nC) respectively with position vectors r1 and r2. Electric field due to q1 at point P (1,0,0)m is given by:r1 = (-3.1, -3, 0)mq1 = -5.5 nC

Position vector r from q1 to P = rP - r1 = (1, 0, 0)m - (-3.1, -3, 0)m = (4.1, 3, 0)m

Using the formula of electric field, the electric field due to q1 at point P will be given by:

E1 = kq1 / r²

where k is the Coulomb constantk = 9 × 10⁹ N m² C⁻²

Electric field due to q1 at point P isE1 = 9 × 10⁹ × (-5.5) / (4.1² + 3²) = -2.42 × 10⁶ N/C

Now, let's consider charge q2. The position vector of q2 is given by:r2 = (-2, 3, -2)mq2 = 9.3 nC

Position vector r from q2 to P = rP - r2 = (1, 0, 0)m - (-2, 3, -2)m = (3, -3, 2)m

Electric field due to q2 at point P will be given by:

E2 = kq2 / r²

Electric field due to q2 at point P is

E2 = 9 × 10⁹ × 9.3 / (3² + (-3)² + 2²) = 6.91 × 10⁶ N/C

Now, we can get the total electric field due to the given charges by adding the electric fields due to q1 and q2 vectorially.

The vector addition of electric fields E1 and E2 is given by the formula:

E = E1 + E2

Let's consider charge q1 (-5.5 nC) and charge q2 (9.3 nC) respectively with position vectors r1 and r2. Electric field due to q1 at point P (1,0,0)m is given by:r1 = (-3.1, -3, 0)mq1 = -5.5 nC

Position vector r from q1 to P = rP - r1 = (1, 0, 0)m - (-3.1, -3, 0)m = (4.1, 3, 0)m

Using the formula of electric field, the electric field due to q1 at point P will be given by:E1 = kq1 / r²

where k is the Coulomb constant

k = 9 × 10⁹ N m² C⁻²

The magnitude of the electric field due to q1 at point P is given by|E1| = 9 × 10⁹ × |q1| / r²= 9 × 10⁹ × 5.5 / (4.1² + 3²) N/C= 2.42 × 10⁶ N/C

The direction of the electric field due to q1 at point P is towards the charge q1.

Now, let's consider charge q2. The position vector of q2 is given by:r2 = (-2, 3, -2)mq2 = 9.3 nC

Position vector r from q2 to P = rP - r2 = (1, 0, 0)m - (-2, 3, -2)m = (3, -3, 2)m

The magnitude of the electric field due to q2 at point P will be given by:

E2 = kq2 / r²= 9 × 10⁹ × 9.3 / (3² + (-3)² + 2²) N/C= 6.91 × 10⁶ N/C

The direction of the electric field due to q2 at point P is away from the charge q2.

Now, we can get the total electric field due to the given charges by adding the electric fields due to q1 and q2 vectorially. The vector addition of electric fields E1 and E2 is given by the formula:E = E1 + E2E = (-2.42 × 10⁶) î + 6.91 × 10⁶ ĵ N/C

Learn more about electric field: https://brainly.com/question/30544719

#SPJ11

A 20.0-kg cannon ball is fired from a cannon with a muzzle speed of 100 m/s at an angle of 20.0° with the horizontal. Use the conservation of energy principle to find the maximum height reached by ba

Answers

A 20.0 kg cannonball is fired from a cannon with a muzzle speed of 100 m/s at an angle of 20.0°. Using conservation of energy, the maximum height reached by the cannonball is approximately 510.2 meters.

A cannon ball weighing 20.0 kg is launched from a cannon with an initial velocity of 100 m/s at an angle of 20.0° above the horizontal.

To determine the maximum height reached by the cannonball using the conservation of energy principle, we consider the conversion of kinetic energy into gravitational potential energy.

Initially, the cannonball has only kinetic energy, given by the equation KE = (1/2)mv², where m is the mass and v is the velocity.

At the highest point of its trajectory, the cannonball has no vertical velocity, meaning it has no kinetic energy but possesses gravitational potential energy, given by the equation PE = mgh, where h is the height and g is the acceleration due to gravity (approximately 9.8 m/s²).

Using the conservation of energy, we equate the initial kinetic energy to the maximum potential energy:

(1/2)mv² = mgh

Canceling the mass and rearranging the equation, we find:

v²/2g = h

Plugging in the given values, we have:

(100²)/(2*9.8) = h

Simplifying the equation, we find:

h ≈ 510.2 m

Therefore, the maximum height reached by the cannonball is approximately 510.2 meters.

To know more about maximum height refer here:

https://brainly.com/question/30878848#

#SPJ11

Other Questions
Diamond Foods Payments to Nut GrowersThe leadership of Diamond Foods (DF), the global California-based premium snack food company, was excited. In the fall of 2011, the company was close to finalizing an agreement with Proctor & Gamble to acquire Pringles brand in exchange for DF stock, this acquisition would help the company achieve the number two position in the U.S. snack foods industry behind PepsiCo. DF product lines currently included potatoes chips (Kettle), popcorn (Pop-Secret), and (nuts) snack nuts, in-shell nuts and culinary nuts) Emerald and Diamond of California). DF started in 1912 as a grower-owned cooperative called Diamond of California. The company originally focused on walnuts, but more recently they transformed into a diverse snack food company. The business changed from a co-operative business status and went public in 2005 with the NASDAQ ticker DMND. The stock price increased, and in September 2011, the price was at an all-time high of $92 per share.The person who orchestrated the companys expansion and growth was CEO and President Michael Mendes, who was hired in 1997. He had previously worked at Hormel Foods Corporation and Dole Food Company. Mendez was very competitive and implemented the companywide philosophy of "bigger is better". This viewpoint was the corporate culture, and it had a significant impact on employees of DF. This aggressive company culture resulted in an emphasis on financial performance and some bold and very expensive acquisitions (e.g., Kettle and Pop-Secret). The most expensive acquisition was to be Pringles. DF was making this acquisition, so it could be a significant player in the very competitive snack foods space where it felt pressure for financial success and greater market share amid increasing industry competition.In Fall of 2011, Mark Roberts, founder of the Off-Wall Street Consulting Group, received an anonymous call. For the fiscal year ending in July 2011, the caller indicated that DF was making momentum payments to growers for walnuts delivered in September 2011. It appears that the approximately $60 million payments could be impacting the wrong fiscal year financial statements. Robert accused DF of incorrectly reporting its payments to suppliers on the company financial statements. DF denied any illegal actions, and they replied that the payments were on advance on the fiscal 2012 crop and had nothing to do with fiscal 2011. Unfortunately, the nut growers disagreed. They were told by the company to keep the money even if they were not going to provide crops for 2012. Supposedly, they were told that the payments were for the prior year.Investigation into the situation ascertained that an additional approximately $20 million of continuity payments were made by DF growers in fall 2010. Again, the question arose as to what fiscal year did these payments relate. Were the payments recorded in the proper year? Were the books cooked? Would the Pringles acquisition occur?There are many accounting rules that may apply in this case. Discuss the rules that you believe may apply.In what fiscal periods should fall 2010 and fall 2011 payments have been recorded in the DF income statements?When was the cash paid to the growers? Was it a different period than when the payments were recorded?How were the financial statements impacted in 2010 and 2011?2. Were there any other things happening in the company that could have had a part in this?3. How was this case of fraud found? Who found it? What are some steps that could have been taken that may have prevented this? What changes did this company make in order to prevent this from occurring again?4. In the end, was the Pringles line acquired? More spacious office at your new job rms produce potatoes and fish, and households buy potatoes and fish. The accompanying table ows the maximum annual output combinations of potatoes and fish that can be produced. Obviously, given their limited resources and available technology. as they use more of their sources for potato production, there are fewer resources available for catching fish. Maximum annual output options 4 A F Quantity of potatoes (pounds) 1,000 800 600 400 200 0 Quantity of fish (pounds) 0 300 500 600 650 675 Draw a production possibility frontier with potatoes on the horizontal axis and fish on the vertical axis illustrating these options, showing points A-F. I. If Winterfell produces no fish, what is the maximum potato production? II. Can Winterfell produce 500 pounds of fish and 800 pounds of potatoes? Explain. Where would this point lie relative to the production possibility frontier? Is this point efficient? TV. Suppose Winterfell is producing 200 potatoes and 200 fishes. Is this an efficient point? How many additional fish could they produce without giving up any potatoes? V. What is the opportunity cost of increasing the annual output of potatoes from 600 to 800 pounds? VI. What is the opportunity cost of increasing the annual output of potatoes from 200 to 400 pounds? VII. Can you infer about the shape of the PPF? (Hint: Find the per unit opportunity cost of Potatoes relative to fish/ Per unit opportunity cost of fish relative to potatoes) Explain what will happen to PPF in the following situations: VIII. IX. Following a period of discrimination against women and minorities, Winterfell legally ended such discrimination in the work place. X. Before the Battle of Winterfell, Winterfell was a full-employment of their resources, but during the war many of their facilities were bombed and people were killed. 5) The demand supply schedule (consider 52 weeks in a year) Price per bag 5 11) VD 6 DO C 8 10 for small bangs of potato chips in millions of bags per year is: Quantity supplied 70 90 Quantity demanded 160 150 140 130 120 110 110 130 150 170 What is the equilibrium price and quantity per week? How much excess demand or supply exists at a price 6 taka per bag? How much excess demand or supply exists at a price 10 taka per bag? Northeastern Heath is a regional medical center. They tle pricing of services and profits to specific services in the medical center Northeastern Health Usos control system Multiple Choice Conce dan feedforward 1. (a) In reaching equilibrium, how much heat transfer occurs from 1.1 kg of water at 40C when it is placed in contact with 1.1 kg of 20C water? Specific heat of water c=4186 J/(kgC) Hint: If th marta tried solve the system below, but she made a mistake. read carefully and try to figure out what her mistake was. the heat of fusion of water is 79.5 cal/g. this means 79.5 cal of energy are required to: Explain how U.S. multinational companies (MNCs) differ from European multinational companies (MNCs) in term of control. And give evidence not less than 250 words. ( control of the companies on employees, thank you) Find the measure(s) of angle given that (cos-1)(sin+1)= 0,and 02. Give exact answers and show all of your work. what cisco device is used to add ports to a cisco product? List and briefly describe the nine broad banking services. George spends most of his time down at the local hardware store where he hangs out with his buddies. He uses the Internet occasionally to look up information about hardware, hunting, and his other hobbies. George's identity is most likely __________ e.netizen identity. Is postmodernism known for its high regard for universal values?Please explain your answer. Consider the given density curve.A density curve is at y = one-third and goes from 3 to 6.What is the value of the median?a. 3b. 4c. 4.5d. 6 What are the major provisions of the DMCA? What is plagiarismand reverse engineering? Differentiate between them. When is itokay to use each of them? kindly could you please explain eachquestion 5.50% For 92 Days From A Multinational Company. With 61 Remaining Days To Maturity, Bank AB Sells The Deposit To Bank AA At 8.75%. Calculate The Secondary Price Of The Certificate Of Deposit. Use 360 Days Per Year.Bank AB accepts a spot deposit for Php 1,000,000.00 at 5.50% for 92 days from a multinational company. With 61 remaining days to maturity, Bank AB sells the deposit to Bank AA at 8.75%. Calculate the secondary price of the certificate of deposit. Use 360 days per year. Diana and Jim enter into a written contract under which Diana will sell Jim some of her rare comic books for $300. The contract contains a list of each comic book that is supposed to be part of the sale. The contract states that it contains the complete and final agreement reached by Diana and Jim. When Jim receives the comics, he is upset to find out that Diana did not include a particular Superman comic. He sues Diana, stating that even though the written contract does not mention that particular Superman issue, he and Diana had orally agreed, just before the contract was written, that she would include the Superman in the deal. Jim wants to submit evidence of their prior oral agreement. Diana argues that such evidence would violate the parol evidence rule. 1. Does this contract have the necessary element of consideration (Chapter 14)? 2. If so, discuss the benefit received by each party and the detriment suffered by each party? In other words, what is each party receiving and what is each party given up? 3. Is this contract enforceable or would it be illegal or violate public policy to enforce this contract (Chapter 15)? 4. Is this the type of contract that falls within the Statute of Frauds (Chapter 16)? 5. Will Jim be allowed to introduce parol evidence to show the party's prior oral agreement before the contract was made (Chapter 16)? A Create a flask web application that displays the instance meta-data as shown in the following example:Metadata Valueinstance-id i-10a64379ami-launch-index 0public-hostname ec2-203-0-113-25.compute-1.amazonaws.compublic-ipv4 67.202.51.223local-hostname ip-10-251-50-12.ec2.internallocal-ipv4 10.251.50.35Submit the flask application python file and a screenshot of the web page showing the instance meta-data. (Loss on issue of debentures: Fixed instalment method) X Ltd. issues $. 10,000 9% Debentures at par repayable at the end of four years at 10% premium. Show the Loss on Issue of Debentures Account in the ledger for the period. Aluminum is reacted with calcium chloride and produces calcium and aluminum chloride. If 4.7 grams of calcium chloride are completely used up in thereaction, how many grams of calcium will be produced? Net income is $50,000. Average assets are $1,000,000. Average owners' equity is $800,000. Solve for return on assets. Answer: I