Answers
Answer:
1,3,5
Explanation:
i think maybe dont come at me
Answer:
it is 1,3,5
Explanation:
Related Questions
Which best describes a concave lens?
It is thinnest at its center and thickest at its outer edges.
It is curved outward at the center and thinnest at its outer edges.
It is curved inward in the center and thickest at its outer edge.
Answers
Answer:
Explanation:
Concave lens also called as diverging lens i.e. it diverges ray of light coming towards it.
Concave lens is thicker at the edges and thinner at the center.
Concave lens formed the virtual image of the object i.e. it cannot be trace on screen. This lens is used to treat the nearsightedness or myopia in which a person is unable to see the far object clearly.
Answer:
It is thinnest at its center and thickest at its outer edges.
Explanation:
graddy
What would scorch marks on fabric near bullet wound indicate?
Answers
Answer:
Often loose fibers surrounding a contact hole show scorch marks from the flame discharge of the weapon. Some synthetic fibers may be melted. The blowback of muzzle gases may produce a star shaped tear pattern around the hole.
Explanation:
if 34.7 g of O2 reacts with iron to form 79.34 g of iron oxide, how much iron was used in the reaction?
A.
19.84 g
B.
44.64 g
C.
104.1 g
D.
114.04 g
Answers
Answer: B. 44.64 g
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
Mass of reactants = mass of iron + mass of oxygen = mass of iron + 34.7 g
Mass of product = mass of iron oxide = 79.34 g
As Mass of reactants = Mass of product
mass of iron + 34.7 g = 79.34 g
mass of iron = 44.64 g
Thus 44.64 g of iron was used in the reaction
PLEASE HELP The Hertzsprung-Russell diagram shown here suggests that the stars with BOTH the highest temperature AND greatest absolute
magnitude are
A) giants
B)Super giants
C) White dwarfs
D) stars similar to the sun
Answers
Answer:
White dwarfs because you look at where the highest temperature is and where is the highest magnitude. Fun fact, the sun will become a white dwarf.
Explanation:
The Hertzsprung-Russell diagram shown here suggests that the stars with Both the highest temperature and greatest absolute magnitude are:
C) White dwarfs
"Hertzsprung-Russell diagram"The Hertzsprung-Russell diagram shown here suggests that the stars with Both the highest temperature and greatest absolute magnitude are White dwarfs.
White dwarf stars (glow lesson D) are the ultimate developmental organize of moo to middle mass stars, and are found within the foot cleared out of the HR chart.
These stars are exceptionally hot but have moo radiances due to their little size.
Thus, the correct answer is C.
Learn more about "Hertzsprung-Russell diagram":
https://brainly.com/question/14857582?referrer=searchResults
Which of the following is NOT an important factor in selecting a medical professional?
A
cost
B accessibility
C. location
D
appearance
Please select the best answer from the choices provided
А
В
C
D
Answers
Answer:
D
Explanation:
appearance is not a imp factor . location could be imp. becoz a proper environment is need to study such courses.
Answer: D. appearance
Explanation:
PLEASE HELP In a bag are 7 red, 9 blue, 2 yellow and 4 green marbles. If you draw out a marble at random, what the probability that you will draw a red or blue marble? P(red ∪ blue) Question 7 options: 7/22 11/22 16/22 18/22 Q
Answers
Answer:
16/22
Explanation:
you add red and blue together
This experiment is to see if water flows faster out of a smaller can or a larger can.
You will need:
• two cans (one quite small like a soup can and the other large, like a juice, can.)
Follow these steps:
A. Remove the top of each can. Punch a hole in the side of each can, very close to the bottom, making sure the holes are equal in size. Cover each hole with a piece of tape, and place the cans next to the sink.
B. Put water in both cans, making sure the water is at the same level - different amounts, but the same level. Turn the cans so the holes are facing into the sink, and remove the tape at the same time. Answer these questions: Do the streams of water shoot out at the same distance? Why or why not?
C. Try the same experiment, but this time put one cup of water in each can. What
happens to the streams of water now?
D. Try the same experiment, but this time fill both cans to the top. What happens to the streams of water?
Answers
Answer:
there the same
Explanation:
A 5.00 cm tall object is placed 4.25 cm from a lens and produces an image that is 3.00 cm behind the lens. What is the magnification of the lens?
Answers
Answer:
The magnification of the lens is 0.7
Explanation:
We have,
Height of an object is 5 cm
Object is placed 4.25 cm from a lens
Image is formed 3.00 cm behind the lens.
It means u = -4.25 cm
v = -3 cm (behind the lens)
Magnification of the lens is given by :
[tex]m=\dfrac{v}{u}\\\\m=\dfrac{-3}{-4.25}\\\\m=0.70[/tex]
So, the magnification of the lens is 0.7
PLEASE ANSWER ASAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answers
Answer: I believe the answer is B (the second option)
side note: this shows a physics question . . . it is not
A 1500 Kg automobile is traveling at a velocity of 100 m/s. Is its energy potential or kinetic? How much energy does it possess? (Remember to convert kg to g)
Answers
Answer:
1.) Kinetic energy
2.) K.E = 7500000000 J
Explanation: Given that a 1500 Kg automobile is traveling at a velocity of 100 m/s.
An object possesses maximum potential energy when it is at rest
And maximum kinetic energy on motion. Since the automobile is travelling with a speed of 100 m/s, its energy is kinetic.
The amount of energy possessed, will be achieved by using formula
K.E = 1/2MV^2
Where
M = 1500kg
To convert it to g, multiply it by 1000
M = 1500 × 1000 = 1500000
V = 100 m/s
K.E = 1/2 × 1500000 × 100^2
K.E = 0.5 × 1500000 × 10000
K.E = 7500000000 J
10. Which of the following types of drug use is not found in Erich
Goode's list of drug use types?
A) Legal instrumental
B) Legal recreational
C) Legal nonrecreational
D) Illegal recreational
Answers
Legal nonrecreational types of drug use is not found in Erich Goode's list of drug use types. Hence, option (c) is correct.
What is Erich Goode's list of drug use types?American sociologist Erich Goode is an expert in the sociology of deviance. He has authored a lot of books on the subject generally as well as on particular aberrant subjects. At the State University of New York at Stony Brook, he was a professor.
Goode's four drug use patterns
Legal instrumental use: Using over-the-counter and prescription medications to treat or relieve symptoms.Legal recreational use: Using legal substances (such as coffee, alcohol, or tobacco) to induce a particular frame of mindIllegal instrumental use - Using non-prescription medications to carry out an action or achieve a target.Illegal recreational use: Using illicit substances to get high or have fun.Learn more about drug, refer the link:
https://brainly.com/question/13294633
#SPJ2
URGENT!! Please answer
Pillows ___ light
- absorb
- reflect
- refract
- All of the above
Answers
Answer:
All of the above or absorb
Explanation:
I'm pretty sure it is absorb, because it depends what type of pillow for it to reflect.
Answer:
pillows absorb light.
Explanation:reflection would have been more like a glass mirror because the mirror reflects light.
Hi, I need some science help ASAP. Here's the question:
Vanessa pushes a box with 50 N of force. The box accelerates 2 m/s2 for 10 seconds. What is the mass of the box?
5 kg
20 kg
25 kg
100 kg
Answers
Answer:
Mass of the box is 25kg
Explanation:
From Newton's second law of motion
Force= mass. acceleration
With the symbol
F=m.a
m=F/a m=(50N)/(2m/s²)
m=25kg
Answer:
25k
Explanation:
What do snow melting, water freezing to ice, and water boiling into steam have in
common? *
O
They involve a change in state.
They involve a change in temperature.
O
They involve a change in thermal energy.
All of the above are true.
Answers
Answer:
All of the above.
Explanation:
In a 200 meter sprint there is one curve and one straightaway? true or false
Answers
Answer:
I got true
Explanation:
Not the best explanation, but my dad said it was true.
Which of the following are major problems with fission reactors? maintaining high temperatures disposal of hot water disposing of radioactive waste obtaining fuel
Answers
Answer:
hot water
Explanation:
Answer:
a
Explanation:
You are a traffic accident investigator. You have arrived at the scene of an accident. Two cars of equal mass (1,000 kg each) were involved in a rear-end accident at a stop sign. Here is what you know: Car 1 approached the intersection from the top of a 25-meter hill. Car 2 was on a flat stretch of road directly in front of Car 1. At the bottom of the hill, Car 1 was going 20 m/s; Car 2 was going 30 m/s before it stopped at the stop sign. There were no skid marks left by Car 2. The collision occurred at the stop sign, where Car 2 had stopped. After the collision, both cars were moving together in the same direction at 10 m/s before slowly rolling to a stop. You must now push Car 2, using 800 N of force, 10 meters off to the side of the road so no one else gets hurt.
1. What was the potential energy of Car 1 at the top of the hill? (3 points)
2. What was the kinetic energy of each car before braking? (4 points)
3. A. How much energy did Car 1 lose from the top to the bottom of the hill? (3 points)
B. Where do you suppose that energy went? (2 points)
4. How much work was done to bring Car 2 to a stop? (4 points)
5. If Car 2 came to a stop in 15 seconds, how much power (in watts) did it take to stop Car 2 at the stop sign by applying force to the brakes? (3 points)
6. What is the final combined momentum of the cars right after the accident? (6 points)
7. Assuming that there are no other nonconservative forces involved, what impulse was given to each car during the collision? (6 points)
A. Car 1 (3 points)
B. Car 2 (3 points)
8. How much energy did Car 1 lose in the collision? (3 points)
9. How much energy did Car 2 gain in the collision? (3 points)
10. Which of the two laws covered in this unit - Law of Conservation of Momentum or Law of Conservation of Energy - is obeyed in this problem? Explain your reasoning. (5 points)
11. How much work did it take to move Car 2 off to the side of the road? (3 points)
12. If it took you 40 seconds to move Car 2 off the road, how much power did you expend? (3 points)
13. Which simple machine does a car have that helped you move Car 2? Explain. (2 points)
Answers
A wave that is traveling toward an interface is called the...??
Answers
Answer:
Surface wave
Eg ocean wave
Please have a look at the image
Answers
Answer:
a
Explanation:
a. zero is the answer...
What can happen if the excretory system doesn't work properly ?
Answers
In terms of forces, what makes the arrow start moving?
Answers
Answer:
the answer is A force is a push or pull that changes the motion of an object. Forces can make objects start or stop moving, cause objects that are already moving to speed up or slow down, or make objects change direction. Force arrows are used to represent both the magnitude and direction of forces.
Explanation:
hope this helps u stay safe
Which is a true statement?
A.
Valence electrons play a key role in chemical reactions.
B.
The properties of elements in a group are identical.
C.
Hydrogen contains multiple valence electrons.
Answers
Answer:
C
Explanation:
Using the diagram below, calculate the PE and KE of the ball at the top, middle, and bottom of a drop. SHOW YOUR WORK!!
Write an explanation of what would happen to the ME, PE, and KE of the ball from the top of the drop to the middle of the drop, and then at the bottom.
Answers
Answer:
At the top
K.E = 0
P.E = 981 J
Mechanical energy is conserved
P.E is maximum
K.E = 0
At the middle
K.E = 981 J
P.E = 0
Mechanical energy is conserved
K.E is maximum
P.E = 0
At the bottom
K.E = 0
P.E = 981 J
Mechanical energy is conserved
K.E = 0
P.E is maximum
Explanation:
Given that
M= 5kg
H = 20 m
t = 7 s
According to conservation of energy,
At the top
K.E = 0
P.E = mgh
P.E = 5 × 9.81 × 20
P.E = 981 J
Mechanical energy is conserved
P.E is maximum
K.E = 0
At the middle
K.E = 981 J
P.E = 0
Mechanical energy is conserved
K.E is maximum
P.E = 0
At the bottom
K.E = 0
P.E = 981 J
Mechanical energy is conserved
K.E = 0
P.E is maximum
Given that
M= 5kg
H = 20 m
t = 7 s
At the top
K.E = 0
P.E = mgh
P.E = 5 × 9.81 × 20
P.E = 981 J
Mechanical energy is conserved
P.E is maximum
K.E = 0
At the middle
K.E = 981 J
P.E = 0
Mechanical energy is conserved
K.E is maximum
P.E = 0
At the bottom
K.E = 0
P.E = 981 J
Mechanical energy is conserved
K.E = 0
P.E is maximum
Explanation:
Given that
M= 5kg
H = 20 m
t = 7 s
At the top
K.E = 0
P.E = mgh
P.E = 5 × 9.81 × 20
P.E = 981 J
Mechanical energy is conserved
P.E is maximum
K.E = 0
At the middle
K.E = 981 J
P.E = 0
Mechanical energy is conserved
K.E is maximum
P.E = 0
At the bottom
K.E = 0
P.E = 981 J
Mechanical energy is conserved
K.E = 0
P.E is maximum
Adding oil to a car's engine reduces _____, which means less _____ is created by moving parts rubbing together.
A. friction; heat energy
B. heat energy; friction
C. friction; kinetic energy
D. heat energy; potential energy
Answers
Answer:
A.) friction, heat energy
Explanation:
Adding oil to something makes it slick, which in turn reduces friction, and When you reduce friction, you also reduce heat energy.
Answer:
The Answer is A: friction; heat energy
HEELLLPPPPP !
Match the property with the correct type of metal.
Soft
(Alkali Metals)
(Alkaline Earth Metals)
Extremely reactive
1 valence electron
2 valence electrons
Harder, more dense
Answers
Answer: Alkali metals
Soft, Extremely reactive, 1 valence electron
Alkaline earth metals
Harder, more dense, 2 valence electrons
Answer:Alkali metals
Soft, Extremely reactive, 1 valence electron
Alkaline earth metals
Harder, more dense, 2 valence electrons
Explanation:
THE PERSON ABOVE ME IS CORRECT IM JUST PUTTING THIS HERE SO YOU KNOW I GOT 100% BECAUSE OF THAT PERSON THANK YOU
During which two phases would surfer’s most likely benefit
A. New and Full Moon
B. New moon and Waxing Crescent
C. Full Moon and Waxing Gibbous
D. 1st Quarter and 3rd Quarter
Answers
The phases where surfer’s most likely benefit include D. 1st Quarter and 3rd Quarter.
Surfers will benefit include during the 1st Quarter and 3rd Quarter because there's tidal change. Tidal change is when coastal areas experience two low and high tides.
The benefit of surfing during this period is that it helps jack the waves. Waves transmit energy and this is important to surfers.
Read related link on:
https://brainly.com/question/18253248
Please help! I'll mark you as branliest!!! :)
Answers
Answer:
pretty sure its C, Radiation because the sun produces radiation
Explanation:
Answer: conduction
Explanation:
The sand is directly transferring heat to the people. They are touching, so it would be an example of conduction.
What do glands do for the body?
Answers
Answer: A gland is an organ which produces and releases substances that perform a specific function in the body.
Explanation: A gland is an organ which produces and releases substances that perform a specific function in the body. There are two types of gland. Endocrine glands are ductless glands and release the substances that they make (hormones) directly into the bloodstream.
Answer:
A gland is an organ which produces and releases substances that perform a specific function in the body. There are two types of gland. Endocrine glands are ductless glands and release the substances that they make (hormones) directlyinto the bloodstream.
Explanation:
Two identical speakers are 3.50 m and 5.20 m from a listener. What is the lowest frequency (n = 1) that would cause constructive interference there? PLS HELP!
Answers
For constructive interference the path difference must be an integer number of wavelengths. The lowest frequency for this would be the longest wavelength with the path difference equal to one wavelength.
Path length difference(m) = 5.20 - 3.50 = 1.70m.
λ =2m ⇒ f = v/λ
λ/2 =1.70
λ = 3.40m
Taking speed of sound as v = 340m/s:
f = v/λ = 340/3.40 = 100Hz.
What is constructive interference?"When two waves of identical wavelength are in phase, they form a new wave with an amplitude equal to the sum of their individual amplitudes."
Know more about constructive interference here
https://brainly.com/question/16098226
#SPJ2
Answer:114
Explanation:
for Acellus
At t = 0, a car has a speed of 30.0 m/s. At t=6.00 s, its velocity is 12.0 m/s.
What is its average acceleration during this interval? plz help...
Answers
Answer: [tex]-3m/s[/tex]
Explanation:
[tex]a=\frac{V_2-V_1}{t}[/tex]
[tex]a=\frac{12-30m}{6s}\\a=-\frac{18m}{6s}\\ a=-3m/s[/tex]
We have a negative acceleration, meaning that the car is slowing down.
