Answer:
3. The special concept reminded by the phrase "Exchanging Butter Cake for Dates" is:
Trade by barter.
4. The need fulfilled by this business is people's demand for Cake.
The want fulfilled by this business is the organization's supply of dates for its production of cake.
Explanation:
A trade by barter involves the exchange of one good or service by one trading party for another good or service from the coincidental trading party without the use of money or monetary mediums. Trade by barter enables people without money to fulfill their needs. The major problem with trade by barter is that there must be coincidence of wants by the two trading partners. This is not always feasible.
Each of Professor A and Professor B at UTD has a private secretary, who can type four letters per hour. The letters are generated at a rate of three per hour by each of the two professors, who have been wondering if they would benefit from pooling the two secretaries. Perform a queuing analysis. What is the average waiting time of a letter in the system.
Answer:
Average waiting time = 7.5 minutes
Explanation:
UTD private secretary can type the number of letters = 4 per hour by each.
By professor, the letter generated = 3 per hour by each
Thus by pooling the average time will be the time that comes by dividing the one hour with total letters in an hour.
Use the below formula:
Average waiting time = Minutes in one hour / total letters
Average waiting time = 60 / 8
Average waiting time = 7.5 minutes
Network externalities: Select one: A. exist when the usefulness of a product increases with the number of consumers who use it B. are created when celebrity endorsements of products lead to a surge in the demand for those products C. can only exist when there are economies of scale D. prevent the dominance of a market by one firm.
Answer:
A. )exist when the usefulness of a product increases with the number of consumers who use it
Explanation:
Network externality can be regarded as a change that occur in benefit as well as in surplus, which is been derived by agent from a good when there is a change in number of other agents that consumes this same type of good. Network externality can as well be regarded as "network effect" this effect is one is that is been had by one user of a good/service on the value of the product with respect to each other people.
It should be noted that Network externalities exist when the usefulness of a product increases with the number of consumers who use it
Define the KPI ‘rate of staff absenteeism’.
Answer:
KPI, Key Performance Indicators are used for measuring the average absenteeism rate per employee. This is computed as a % of the total working days.
Explanation:
Individual employee Key Performance Indicators (KPIs) are metrics that assist in tracking the ability of your employees to meet your expectations and their impact on the business goals.
A company like Motorola might establish a goal of reducing its inventory by 50 percent over the next year. To ensure that it reaches this goal, the company could monitor its progress on a quarterly or monthly basis. If the managers at Motorola discover that there is a danger of not achieving this goal, they can take corrective action to adjust for the deficiency. This is a description of the managers' ____ function.
Answer:
stfhgocovovohdj vbb
Explanation:
sryyy
Explain how the hotel business could create added value to the goods they buy in?
Answer:
Well-designed rooms, attractive and comfortable appliances, well-dressed and respectful assistants, good quality entertainment equipment, and delightful food made by experienced chefs.
Explanation:
Guests will feel more welcomed to a clean and comfortable hotel. Respectful assistants, good quality entertainment equipment, and food made by experienced chefs can boost the morale of guests.
A consumer's weekly income is $250, and the consumer buys 12 bars of chocolate per week. When weekly income increases to $280, the consumer buys 13 bars per week. The income elasticity of demand for chocolate by this consumer is about
Answer:
0.69
Explanation:
Given that we have the formula for calculating income elasticity of demand as the percent change in quantity demanded divided by the percent change in income, hence, we have the percent change in quantity demanded => 13 - 12 = 1 ÷ 12 = 0.083
the percent change in income => 280 - 250 = 30 ÷ 250 = 0.12
Therefore we have => 0.083 ÷ 0.12 = 0.69
Hence, the final answer is 0.69
the gap between 'where we are now' and 'where we want to be' is known as the.....
Answer:
Planning gap.
Explanation:
Planning can be defined as the process of developing organizational objectives and translating them into action plans or courses of action.
This ultimately implies that, planning is a strategic technique used by organizations to make an aggregate plan for its manufacturing (production) process typically ahead of time, in order to have an idea of the level of goods that are to be produced and what resources are required so as to reduce the total cost of production to its barest minimum.
The planning gap can be defined as the gap between "where we are now?" and "where we want to be?"
Basically, "where are we now?" describe the current situation of things or financial and non-financial activities that a business firm currently holds.
On the other hand, "where we want to be?" is a vision and mission statement that focuses on achieving the goals and objectives set for a business firm.
During 2017, Benson purchased $1,450,000 of raw materials, incurred direct labor costs of $250,000, and incurred manufacturing overhead totaling $160,000. How much raw materials were transferred to production during 2017 for Benson
Answer:
Raw Materials transferred to production during 2017 $1,466,000
Explanation:
The computation of the raw material transferred to production is given below:
Opening raw material 2016 $80,000
Add : Purchase of Raw material $1,450,000
Less Closing Stock raw material 2017 $64,000
Raw Materials transferred to production during 2017 $1,466,000
Hence, the same should be relevant
MC Qu. 101 The following information... The following information describes a company's usage of direct labor in a recent period. The direct labor rate variance is: Actual hours used 46,000 Actual rate per hour $ 16 Standard rate per hour $ 15 Standard hours for units produced 48,000
Answer:
$46,000 Unfavorable
Explanation:
Calculation to determine what The direct labor rate variance is:
Using this formula
Direct labor rate variance = Actual hours * ( Actual Rate - Standard Rate)
Let plug in the formula
Direct labor rate variance=46000*($16- $15)
Direct labor rate variance=46,000*$1
Direct labor rate variance=$46,000 Unfavorable
Therefore The direct labor rate variance is: $46,000 Unfavorable
Identify whether each of the following statements best illustrates the concept of consumer surplus, producer surplus, or neither.
Statement Consumer Surplus Producer Surplus Neither
Even though I was willing to pay up to $83 for a watch, I bought a watch for only $75.
I sold a used textbook for $55, even though I was willing to go as low as $47 in order to sell it.
A local store was having a sale on sweaters, so I bought a jersey sweater for my brother.
Answer:
Consumer surplus
producer surplus
neither
Explanation:
Consumer surplus is the difference between the willingness to pay of a consumer and the price of the good.
Consumer surplus = willingness to pay – price of the good
The willingness to pay for the watch was $83 but the watch was bought for $75. There is a consumer surplus from the purchase
Producer surplus is the difference between the price of a good and the least price the seller is willing to sell the product
Producer surplus = price – least price the seller is willing to accept
The least price the seller was willing to accept for the purchase was $47 but he was paid $55 for the textbook. This is a producer surplus
At year-end (December 31), Chan Company estimates its bad debts as 0.30% of its annual credit sales of $896,000. Chan records its Bad Debts Expense for that estimate. On the following February 1, Chan decides that the $448 account of P. Park is uncollectible and writes it off as a bad debt. On June 5, Park unexpectedly pays the amount previously written off. Prepare Chan's journal entries for the transactions.
Answer:
Explanation:
Dec 31:
Debit Bad debts expense = 0.003 × $896000 = $2688
Credit Allowance for doubtful accounts = $2688
February 1:
Debit Allowance for doubtful accounts $448
Credit Accounts receivable—P. Park $448
June 5:
Debit Accounts receivable—P. Park $448
Credit Allowance for doubtful accounts $448
June 5:
Debit Cash $448
Credit Accounts receivable—P. Park $448
Read the argument below and determine the underlying principle that was used to come to the conclusion presented: A free college education for every citizen is important because it helps the United States create the best-educated workforce in the world. European countries like Germany are able to provide a free college education to their citizens, and the United States should as well. Which other argument uses the same underlying principle as the argument above?
a. Children should get free dental care, even if they drink a lot of soda which causes cavities.
b. Children should get free dental care because it will help prevent more serious issues later on and reduces future healthcare costs.
c. Every child should get free dental care, even if they can afford to pay for it.
Answer:
1. The underlying principle is
to create the best-educated workforce in the world.
2. The argument that uses the same underlying principle as the argument 1 above is:
b. Children should get free dental care because it will help prevent more serious issues later on and reduces future healthcare costs.
Explanation:
The underlying principle is a general rule which can be applied to different situations. It shows the reason for doing something or embarking on a program. For example, to offer free college education for every U.S. citizen, the underlying principle is to "create the best-educated workforce in the world."
In addition to the date of recordation, what other factor is used to determine lien priority?
Answer:
Two factors primarily determine lien priority. Firstly the lien's categorization as superior or junior, and secondly the date the lien was recorded.
Explanation:
An encumbrance is most broadly defined as
another's right to use a property without the permission of the property owner.
another's right to claim the sale proceeds of a property that has been used as collateral for a loan.
another's interest in a real property that limits the interests of the freehold property owner.
another's right to control how the freehold owner of a real property uses the property.
In addition to the date of recordation, lien's categorization is other factor used to determine lien priority.
What is lien priority?Lien priority helps to know the order in which creditors get paid following a foreclosure.
Date of recordation is one of the factor yo consider because those on the earlier dates are attended to first.
Therefore, lien priority is so base on categorization because Superiors are been attended to first.
Learn more about lien priority at;
https://brainly.com/question/24858866
Cara has just come in for her morning shift , but the sales floor is a mess . Looks like the night crew didn't clean up . She groans , but then gets to work cleaning the displays before customers come . If she doesn't , who else will ? What good problem - solving skills is she exhibiting? a ) Seeking advice when necessary Ob ) Open to seeing new perspectives c ) Having a solutions - oriented attitude
Answer:
having a solutions-oriented attitude
Explanation:
she seen things wasn't done so she starts cleaning because she takes pride in her job
why multinational company are developed
Answer:
Multinationals provide an inflow of capital into the developing country.
Explanation:
This capital investment helps the economy develop and increase its productive capacity.
Standish Company manufactures consumer products and provided the following information for the month of February:
Units produced 131,000
Standard direct labor hours per unit 0.20
Standard fixed overhead rate (per direct labor hour) $2.50
Budgeted fixed overhead $65,000
Actual fixed overhead costs $68,300
Actual hours worked 26,350
Required:
a. Calculate the fixed overhead spending variance using the formula approach.
b. Calculate the volume variance using the formula approach.
Answer and Explanation:
The computation is shown below:
a. Fixed overhead Spending Variance is
= Budgeted Fixed Overhead - Actual Fixed overhead
= $65000 - $68300
= - $3300 (unfavorable)
b.
Fixed Overhead Volume Variance is
= (131000 × 0.20 × $2.50) - $65000
=$65500 - $65000
= $500 Favorable
In this way these can be determined
In the short run, open-market purchases a. increase investment and real GDP, and decrease interest rates. b. increase real GDP and interest rates, and decrease investment. c. increase investment and interest rates, and decrease real GDP. d. decrease investment, interest rates, and real GDP.
Answer: a. increase investment and real GDP, and decrease interest rates.
Explanation:
During an Open Market Purchase, the central bank of the country would be buying back securities from the public which means that it would be infusing money into the economic system.
With an increased amount of money in the economy, people will be able to save more which means that interests rate will drop because there are now more loanable funds. This drop in interest rates will encourage more companies and people to borrow cash for investment which will then lead to a higher GDP.
In the short run, in the open-market purchase, there has been an increase in investment and real GDP and decreased interest rates. Thus option A is correct.
The interest rate has been the amount of interest lent onto the principal sum. The GDP has been the gross domestic product that has been the market value of the final products.
In the open-market purchase, there has been an increase in the amount of money in the market. The government has been buying the securities and results in the market flow of money. The market flow will eventually result in an increase in the GDP with the decreased interest rates.
Thus in the short run, in the open-market purchase, there has been an increase in investment and real GDP and decreased interest rates. Thus option A is correct.
For more information about the open market purchase, refer to the link:
https://brainly.com/question/3437168
Midsouth Stitchery wants to improve their productivity. Their process yield is currently 91.56% based on 9816 yards of material. If they are going to improve their productivity to 92.10, how many yards of finished material will they have to produce from the same amount of material input
Answer:
9,040.54 yards
Explanation:
Input material amount I = 9,816 yards
Productivity P = 92.10%
Let Output Material amount be O
O = I * P
O = 9,816 yards * 0.9210
O = 9040.536
O = 9040.54 yards
So, the unit of yards they will have to produce from the same amount of material input is 9,040.54 yards
You have been asked by the president of your company to evaluate the proposed acquisition of a new special-purpose truck for $250,000. The truck falls into the MACRS three-year class, and it will be sold after three years for $50,000. Use of the truck will require an increase in NWC (spare parts inventory) of $5,000. The truck will have no effect on revenues, but it is expected to save the firm $80,000 per year in before-tax operating costs, mainly labor. The firm's marginal tax rate is 21 percent. What will the operating cash flow for this project be during year 3
Answer:
Please find the complete solution in the attachment file.
Explanation:
Please find the attachment table for the 3 years of cash flow:
From the list below, select the items that are classified as a materials activity. (You may select more than one answer. Single click the box with the question mark to produce a check mark for a correct answer and double click the box with the question mark to empty the box for a wrong answer. Any boxes left with a question mark will be automatically graded as incorrect.)
Raw materials used
Raw materials beginning inventory
Raw materials purchases
Work in process beginning inventory
Goods manufactured
Direct labor used
Factor overhead used
Answer and Explanation:
The classification is as follows:
Under Materials activity
Opening balance of Raw materials inventory
Purchase of the Raw materials purchases
Under Production activity:
OPening balance of Work-in process inventory
Raw material used
Direct labor used
Factory overhead used
Under Sales activity:
Goods manufactured
In this way it should be categorized
Hence, the same should be relevant
pllzzzzzzzzzzzzzzzzz
Answer:
liability risk
Explanation:
Answer:
liability risk is right opstion
In ________ organizational cultures, more individuality is shown through the organization’s rules being less strictly applied.
Answer:
weak
Explanation:
An organizational culture can be defined as the shared norms, beliefs, assumptions and values that exist in an organization.
An ethical climate can be defined as a collection of behaviors that are considered to be acceptable and correct within an organization or business firm. Also, an ethical climate provides the human resources management of an organization with a framework or benchmark on how employee behavioral issues or ethical problems are to be managed or handled within the organization.
In weak organizational cultures, more individuality of an employee working within an organization is shown as a result of the organization’s rules being less strictly applied.
On a related note, the rules guiding an organization are generally strictly being applied in strong organizational culture.
A new machine requires an investment of $630,000 and will generate $100,000 in cash inflows for 7 years, at which time the salvage value of the machine will be $130,000. Using a discount rate of 10%, the net present value of the machine is $_________
Answer:
$-76,447.56
Explanation:
Net present value is the present value of after-tax cash flows from an investment less the amount invested.
NPV can be calculated using a financial calculator
Cash flow in Y0 = -630,000
Cash flow in Y1 - Y6 = 100,000
Cash flow in Y7 = 100,000 + 130,000
I = 10%
npv = $-76,447.56
To find the NPV using a financial calculator:
1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.
2. after inputting all the cash flows, press the NPV button, input the value for I, press enter and the arrow facing a downward direction.
3. Press compute
Answer:
-76,510, (76,510)
Explanation:
At the beginning of the period, the Cutting Department budgeted direct labor of $125,000, direct materials of $151,000 and fixed factory overhead of $11,800 for 8,000 hours of production. The department actually completed 10,600 hours of production. What is the appropriate total budget for the department, assuming it uses flexible budgeting? Round hourly rates to two decimal places. Round interim calculations to two decimal places. Round your final answer to the nearest dollar. a.$381,335 b.$377,606 c.$291,635 d.$287,800
Answer:
the appropriate total budget should be $377,500
Explanation:
The computation of the appropriate total budget should be given below:
Direct material ($151,000 ÷ 8,000 × 10,600) $200,075
direct labor ($125,000 ÷ 8,000 × 10,600) $165,625
fixed factory overhead $11,800
Total budget cost 377,500
Hence, the appropriate total budget should be $377,500
This is the answer but the same is not provided in the given options
Which of the following combinations is ensured to increase?
please you can give any option or full question
During a risk brainstorming session a team member identifies a risk. This particular risk does not seem to belong to any of the categories in you Risk Breakdown Structure (RBS). How should you respond
Answer:
Record it in the risk register, discuss potential responses and make a note to update the RBS.
Explanation:
Risk management is the process by which the management of an organisation identifies, assessed, and controls threats that may affect the company's capital or earnings.
The risks can be as a result of natural disasters, management error, financial uncertainty, or accidents.
In the given instance if a risk is not on any of the categories in you Risk Breakdown Structure (RBS), there is need to record it in the risk register, discuss potential responses and make a note to update the RBS.
A company is designing a product layout for a new product. It plans to use this production line eight hours a day in order to meet projected demand of 480 units per day. The tasks necessary to produce this product are:
Answer:
1. The correct option is C. 54.
2. The correct option is E. 60.
3. The correct option is A. 3.
4. The correct option is E. 90%.
5. The correct option is E. y.
Explanation:
Note: This question is not complete. The complete question is therefore provided before answering the question as follows:
A company is designing a product layout for a new product. It plans to use this production line eight hours a day in order to meet projected demand of 480 units per day. The tasks necessary to produce this product:
Task Time (sec) Immediate Predecessor
u 30 none
v 30 u
w 6 u
x 12 w
y 54 x
z 30 v, y
1. Without regard to demand, what is the minimum possible cycle time (in seconds) for this situation?
A. 162
B. 72
C. 54
D. 12
E. 60
2. If the company desires that output rate equal demand, what is the desired cycle time (in seconds)?
A. 162
B. 72
C. 54
D. 12
E. 60
3. If the company desires that output rate equal demand, what is the minimum number of workstations needed?
A. 3
B. 4
C. 5
D. 6
E. 7
4. If the company desires that output rate equal demand, what would be the efficiency of this line with the minimum number of workstations?
A. 100%
B. 92.5%
C. 75%
D. 87.5%
E. 90%
5. If the company desires that output rate equal demand, what is the last task performed at the second workstation in the balance which uses the minimum number of workstations?
A. u
B. v
C. w
D. x
E. y
The explanation of the answers is now provided as follows:
1. Without regard to demand, what is the minimum possible cycle time (in seconds) for this situation?
The minimum cycle time is equal to the maximum task time. From the data in the question, it can be seen that the maximum task time is 54. Therefore, the correct option is C. 54. That is, the minimum possible cycle time (in seconds) for this situation is 54.
2. If the company desires that output rate equal demand, what is the desired cycle time (in seconds)?
Desired cycle time (in seconds) = Demand rate / Number of hours per days = 480 / 8 = 60
Therefore, the correct option is E. 60.
3. If the company desires that output rate equal demand, what is the minimum number of workstations needed?
Total task time = 30 + 30 + 6 + 12 + 54 + 30 = 162
Minimum possible cycle time = 54
Therefore, we have:
Minimum number of workstations needed = Total task time / Minimum possible cycle time = 162 / 54 = 3
Therefore, the correct option is A. 3.
4. If the company desires that output rate equal demand, what would be the efficiency of this line with the minimum number of workstations?
Line efficiency = Total task time / (Minimum number of workstations needed * Desired cycle time) = 162 / (3 * 60) = 162 / 180 = 0.90, or 90%
Therefore, the correct option is E. 90%.
5. If the company desires that output rate equal demand, what is the last task performed at the second workstation in the balance which uses the minimum number of workstations?
The last task should be the one has the longest task time. From the data table in the question, it can be observed that y is the task that has the longest task time. This implies y is the task to perform last.
Therefore, the correct option is E. y.
Samir is a self-employed marketing consultant. He had no income from January through March 2020. His April through December 2020 income subject to SE tax is $55,000.
Samir's SE tax for 2020 is $7,771 [$55,000 x 0.9235 x 0.153 = $7,771]. Samir may reduce his estimated tax payments by how much? Hint: USE Form Schedule SE to help you find the answer.
Answer:
$3,886
Explanation:
Since SELF EMPLOYMENT TAX is 15.3% of your wages which is why the Internal Revenue Service (IRS) make it possible for you to deduct your employer equal portion of your self employment taxes that the employer pays during the year which is 7.65% Calculated as (15.3%/2) which therefore means that Samir may reduce his ESTIMATED TAX PAYMENTS by $3,886 [$55,000 x 0.9235 x 0.0765 = $3,886] while the remaining 7.65%( 15.3% -7.65%) are not deductible because they correspond to employee taxes.
Therefore he may reduce his ESTIMATED TAX PAYMENTS by $3,886.
A company purchases and uses 40000 gallons of materials for which they paid $3 a gallon. The materials price variance was $90000 favorable. What is the standard price per gallon?
Answer:
the standard price per gallon is $5.25
Explanation:
the computation of the standard price per gallon is given below;
Materials Price Variance = Actual Quantity × (Standard Price - Actual Price)
$90,000 = 40,000 × (Standard Price - $3)
$2.25 = Standard Price - $3
Standard Price = $5.25
Hence, the standard price per gallon is $5.25
The same should be considered
An educational software company wants to compare the effectiveness of teaching about supply and demand curves between computer animation presentations and textbook presentation. The company tests the economic knowledge of a number of first-year college students, then randomly divides them into two groups. One group uses the animation and the other studies the text. The company retests all the students and compares the increase in economic understanding between the two groups. Is the study described above an experiment? Why or why not?
Answer:
Yes, this is often an experiment. the corporate assigned students to either the animation or the text, instead of watching post hoc ergo propter hoc data.
Explanation:
The explanatory variables are the pre-test data and therefore the assignment to a given group. The responding variable is that the post-test data.
