Answer:
8) Heat energy is the form energy that is transferred from one object to another with different temperatures. Sun is the source of heat energy.
Spaceship 1 and Spaceship 2 have equal masses of 150 kg. Spaceship 1 has an initial momentum magnitude of 900 kg-m/s. What is its initial speed?
A. 9 m/s
B. 6 m/s
C. 90 m/s
D. 60 m/s
Answer:
ans: 6 m/s
Explanation:
spaceship 1 has mass= 150kg
initial momentum of spaceship 1 = 900 kg•m/s
we know,
momentum = mass × velocity
so,
velocity = momentum/mass
= 900 / 150
= 6 m/s
since we know it was initial momentum so, velocity is initial speed,
The lower the pH number is, the more ______ the solution.
Answer:
more acidic (less base)
hope this helps! :)
when we put our finger in front a a lit flashlight, light appears to pass through our finger when seen on a wall,how?
Answer:
diffraction phenomenon
Explanation:
When you place your finger in front of a flash, you have a diffraction phenomenon whereby the light fills a part of the space with the first maximum diffraction.
In this case the phenomenon of geometric optics cannot explain the process of bending the beam around an object.
Which car safety features absorb kinetic energy?
A. Seat belts and air bags
B. Seat belts and crumple zones
C. Seat belts, crumple zones and air bags
Answer:
C
Explanation:
Seat belts absorb kinetic energy when a car crashes because it pulls you back from falling forward given the kinetic energy (and momentum) you had before the crash.
Air bags absorb kinetic energy when a car crashes because it pushes you back from falling forward given the kinetic energy (and momentum) you had before the crash.
Crumple zones absorb kinetic energy when a car crashes because it provides a cushion when the cars crash. Kind of like dropping your phone into a pillow.
I hope this helps! :)
Answer:
C. Seat belts, crumple zones and air bags
Explanation:
All of these car safety features absorb kinetic energy, including seat belts, crumple zones and air bags.
what is the mathematical relationship among voltage current and resistance
Answer:
The relationship between voltage, current, and resistance is described by Ohm's law. This equation, i = v/r, tells us that the current, i, flowing through a circuit is directly proportional to the voltage, v, and inversely proportional to the resistance, r.
Which statements describe acceleration? Check all that apply. Negative acceleration occurs when an object slows down in the positive direction. Negative acceleration occurs when an object slows down in the negative direction. Negative acceleration occurs when an object speeds up in the negative direction. Positive acceleration occurs when an object speeds up in the positive direction. Positive acceleration occurs when an object speeds up in the negative direction. Positive acceleration occurs when an object slows down in the negative direction
Answer:
Negative acceleration occurs when the acceleration vector points to the left.
1. Object slowing down in the positive direction.
2. Object speeding up in the negative direction.
Following six statements:
1. T
2. F
3. T
4. T
5. F
6. T
Check direction of acceleration vector.
Phecda has a surface temperature of approximately 9500 K and a luminosity of 63. Identify the name of the star found on the Characteristics of Stars chart in the 2011 Edition Reference Tables for Physical Setting/Earth Science that has a surface temperature and luminosity closest to Phecda. a) Deneb b) Rigel c) Sirius d) Pollux
Answer:
Sirius
Explanation:
On the HR diagram Sirius is the closet.
c) Sirius has a surface temperature and luminosity closest to Phecda
What is surface tension and luminosity of a star ?
Surface temperature is the temperature at or near a surface. Luminosity is an absolute measure of radiated electromagnetic power (light), the radiant power emitted by a light-emitting object over time.
As it can be observed from the graph attached that Sirius have a surface temperature of about 10,000 K which can be considered as closest to 9500 K comparatively to other stars and if we see the the y coordinate of Sirius which is the luminosity representing axis , then Sirius have a value of luminosity closer to 63
hence correct answer is c)Sirius
learn more about surface temperature and luminosity :
https://brainly.com/question/15099713?referrer=searchResults
#SPJ2
Arches National Park is a desert landscape located in Utah. The park is filled with arches that have been formed by nature. The arches were once solid rock. Over time, extreme temperature changes and windy conditions have caused pieces of rock to crumble and blow away, leaving holes in the rock and forming the arches. Which of these processes is responsible for the formation of the arches?
a.cooling magma
b.weathering and erosion
c.compaction and cementation
d.increased geological pressures
Ocean zones can be classified based on distance from Shore into intertidal,
costal ocean, and open oceans.
True or false ?
Answer:
I think true
Explanation:
I hope I'm right and I hope it helps
Answer:
true
Explanation:
basta yun yung sagot ko
True or False: Sound waves are the longest wave lengths on the electromagnetic spectrum.
Answer:
False: Wave lengths on the electromagnetic spectrum are "electromagnetic",
They are transverse waves,
Sound waves are "longitudinal" waves and depend on the motion of the medium of transmission for propagation.
Two closed organ pipe gives 4 beats when sounded together at 5°C. Calculate the number of beats in 35°C
Answer:
The number of beats is 10.58 in 35°C.
Explanation:
The beat frequency is given by : f₁-f₂
At 5°C, f₁-f₂ = 4
We need to find the number of beats in 35°C.
The frequency in a standing wave is proportional to [tex]\sqrt T[/tex].
So,
[tex]\dfrac{f_1-f_2}{f_1'-f_2'}=\dfrac{\sqrt {T}}{\sqrt{T'}}\\\\f_1'-f_2'=(f_1-f_2)\times \dfrac{\sqrt{T'}}{\sqrt{T}}\\\\f_1'-f_2'=4\times \dfrac{\sqrt{35}}{\sqrt{5}}\\\\f_1'-f_2'=10.58[/tex]
So, the number of beats is 10.58 in 35°C.
when a wooden block floats in water displaces 0.006 cubic of the water find the weight of the wooden block when it is in air
Answer:
solve it with the formula 1−0.4=0.6, 0.6Vρg=Vρbg where ρb
Explanation:
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.In the second case: 1.5fVρg=Vρbg+Vρba=1.5Vρbg⇒fρ=ρb⇒f=0.6.
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.In the second case: 1.5fVρg=Vρbg+Vρba=1.5Vρbg⇒fρ=ρb⇒f=0.6.Thus, the fraction of immersed volume remains the same.
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.In the second case: 1.5fVρg=Vρbg+Vρba=1.5Vρbg⇒fρ=ρb⇒f=0.6.Thus, the fraction of immersed volume remains the same.Body will float with 40% of the volume above water surface.
The atomic number of a nucleus decreases during which nuclear reactions?
The speed of light in vinegar is 2.30 x 10^8 m/s. Determine the index of refraction. (2
Answer:
[tex]n _{v} = \frac{c}{v} \\ = \frac{3 \times {10}^{8} }{2.30 \times {10}^{8} } \\ = 1.30[/tex]
This question involves the concept of refractive index.
The refractive index of the vinegar is "1.3".
What is the Refractive Index?The refractive index is defined as the ratio of the speed of light in air and the speed of light in the given medium which is vinegar here.
[tex]\eta = \frac{c}{v}[/tex]
where,
[tex]\eta[/tex] = refractive index = ?c = speed of light in air = 3 x 10⁸ m/sv = speed of light in vinegar = 2.3 x 10⁸ m/sTherefore,
[tex]\eta = \frac{3\ x\ 10^8\ m/s}{2.3\ x \10^8\ m/s}[/tex]
η = 1.3
Learn more about refractive index here:
https://brainly.com/question/23750645
#SPJ2
Señala cual de las siguientes propiedades de una sustancia son propiedades características= masa densidad volumen belleza conductividad eléctrica
Answer:
i) densidad
ii) conductividad eléctrica
Explanation:
Las propiedades características de una sustancia se denominan también propiedades intrínsecas. Estas son propiedades que no dependen de la cantidad de sustancia presente.
Las propiedades características se pueden utilizar para identificar una sustancia porque son propiedades que siempre debe exhibir la sustancia.
Entre las opciones, podemos encontrar las siguientes sustancias características;
i) densidad
ii) conductividad eléctrica
A motor does a total of 480 joules of work in 5.0 seconds to lift a 12-kilogram block to the top of a rampThe average power developed by the motor is
Answer:
there it is fella
we neglect the mass data
Brian has an object suspended in the air. It has a mass of 100 kg and is 25 meters above the ground. What is the object’s potential energy?
Explanation:
the PE = Weight x g x Height above ground where g is the gravitational constant (9.8m/s^2)
so tge PE = 100 x 9.8 x 25 = 24500 J
Con respecto a las magnitudes longitud del péndulo y periodo, ¿por qué la línea de mejor ajuste de los puntos-dato de la distribución indica que sí hay relación entre ambas magnitudes?
Answer:
Por que existe una relación entre dichas magnitudes.
Para un pendulo perfecto de largo L, sabemos que el periodo esta definido como:
[tex]T = 2*\pi *\sqrt{L/g}[/tex]
Donde:
pi = 3.14
L = largo del péndulo
g = aceleración gravitatoria = 9.8 m/s^2
Entonces podemos ver que el periodo es proporcional a la raíz cuadrada de la longitud del péndulo.
Esto es por lo que al analizar datos de un experimento se debería observar una relación entre esas magnitudes.
If the distance between two objects is increased to four times the original distance.how will that increase change the force of attraction between the object
Answer:
Gravitational force becomes sixteen times lesser. The strength of the gravitational force between two objects is dependent on their mass. Gravitational force will be weaker if the objects move further away from each other.
This was used to solve for the gravitational force,
G = gravitational constant
m = mass of the first object
M = mass of the second object
d = distance between the two objects
[G * (m*M) / 16d^2] = 1/16
A puppy finds a rawhide bone and begins to pull it with a force, Ft. The free-body diagram is shown.
Which describes what happens to the bone?
Answer:
it begins to move to the right! :)
PLEASE HELP ME!
1. Figure 5.20 shows a graph of displacement against time for a wave.
(a) What is meant by amplitude?
(b) Determine the period of oscillation, T. Then, calculate the frequency of oscillation.
2. Compare and contrast progressive wave and stationary wave.
Answer:
a) A = 3 cm, b) T = 0.4 s, f = 2.5 Hz,
2) A standing wave the displacement of the wave is canceled and only one oscillation remains
Explanation:
a) in an oscillatory movement the amplitude is the highest value of the signal in this case
A = 3 cm
b) the period of oscillation is the time it takes for the wave to repeat itself in this case
T = 0.4 s
the period is the inverse of the frequency
f = 1 /T
f = 1 /, 0.4
f = 2.5 Hz
2) a traveling wave is a wave for which as time increases the displacement increases, in the case of a transverse wave the oscillation is perpendicular to the displacement and in the case of a longitudinal wave the oscillation is in the same direction of the displacement.
A standing wave occurs when a traveling wave bounces off some object and there are two waves, one that travels in one direction and the other that travels in the opposite direction. In this case, the displacement of the wave is canceled and only one oscillation remains.
what would a permanetly magnetic substance be called
Answer:
A Permanent magnet or a static magnet
Explanation:
A permanent magnet is an object made from a material that is magnetized and creates its own persistent magnetic field. Materials that can be magnetized, which are also the ones that are strongly attracted to a magnet, are called ferromagnetic (or ferrimagnetic).
6.02 × 104 × 7.54 × 10-6
Answer:
18882.5728
Explanation:
Calculator.
Answer:
47.200,432
Explanation:
6.02 × 104 = 628,08
628.08 × 7,54 = 4720,6432
4720,6432 × 10 = 47.206,432
47.206,432 - 6 = 47.200,432
a student places 8 similar coins in a pile . the height of the pile of coins is 2.4 cm calculate the average thickness of one coin
Answer:
0.3 cm
Explanation:
[tex] \frac{2.4}{8} \\ = 0.3[/tex]
Please help!! I need this asap I will mark brainliest!!
Answer:
50N to the right
Explanation:
You would find net force by adding the 20 and the 30 together since they are being pushed to the same side (the right). Therefore, the answer will be 50N to the right.
hiytreawretyuiouytrdsedrtyuiougfdgiojgfchjkljhjkl;kjhbjkljhbnjknjbnjknbvnm,nbm,nmjj
Answer:
Stimulants are a group of drugs that result in increased activity in the body. Sometimes referred to as “uppers,” these drugs are frequently abused due to their performance-enhancing and euphoric effects. Generally, those who abuse stimulants experience heightened energy levels and enhanced focus.
Stimulants speed up mental and physical processes, which can produce desirable effects in the short-term by increasing levels of dopamine in the brain. While users may feel great due to the short-term effects of stimulants, long-term abuse of these drugs can have significant consequences, which is why it is so important for those who abuse the drugs to get help as quickly as possible.
Explanation:
hope this works
If he jumps from the plane with a velocity of +2 ft/s and, after 7 seconds of free fall, he has a velocity of -223ft/s, what is his displacement?
Answer:
his displacement is 772.85 ft
Explanation:
Given;
initial velocity of his jump, u = 2 ft/s
final velocity of his jump, v = - 223 ft/s
time of motion, t = 7 seconds
acceleration due to gravity, g = 32.17 ft/s²
Let downward motion = positive direction
Let his displacement after 7s = Δh
Apply the following kinematic equation to determine his displacement.
[tex]v^2 = u^2 + 2g\Delta h\\\\(-223)^2 = (2)^2 + (2\times 32.17)\Delta h\\\\49,729 = 4 + 64.34\Delta h\\\\-64.34 \Delta h = 4 - 49,729\\\\-64.34 \Delta h = -49,725\\\\\Delta h = \frac{49,725}{64.34} \\\\\Delta h = 772.85 \ ft[/tex]
Therefore, his displacement is 772.85 ft
Suggest two ways in which the boy could balance the beam?
Answer:
Hope this is what you were looking for!
Explanation:
1) So, if we are talking about balancing a straight stick (beam), he could put a finger from each hand on either side of it and move them together. As a result of friction his fingers will meet at the balance point.
2) Method of trial and error.
if the weight of 1kg is 10 N in water what is the density of the stone
Answer:
I have a screenshot of this.
Explanation:
(2²)⁴pepelelellelrle
