Plz answer the first two questions and maybe the third​. I will give brainliest.

Answer:

Equilibrium will shift leftwards towards NO2.

Explanation:

Hello there!

In this case, according to the Le Cha telier's principle, it is possible to realize that the increase of the volume turns out in the shift towards the most of the gaseous moles are in; in such a way, for the given chemical reaction, we can notice how NO2 (reactant side) has the most of the moles (2 moles in comparison to 1 mole of N2O4); and therefore, by increasing the volume, the equilibrium will shift to it, it means leftwards.

Best regards!

Answer:

Chemical energy

Explanation:

By the use of electrons and protons from water

Answer:

chemical energy

Explanation:

Photosynthesis is the process by which organisms that contain the pigment chlorophyll convert light energy into chemical energy which can be stored in the molecular bonds of organic molecules (e.g., sugars). Photosynthesis powers almost all trophic chains and food webs on the Earth.

Answer:

Ingles porfavor

Explanation:

The calorimeter is used to measure the heat of the system. The enthalpy of the combustion of magnesium cannot be measured by the calorimeter as it could melt the cup.

A coffee cup calorimeter is a styrofoam cup that contains partially filled water and is dipped with a thermometer. The reaction occurs in the water of the cup and hence differs from the bomb calorimeter.

The enthalpy of combustion is rigorous which can dissolve the polystyrene cup and hence is not used. They are better insulators than a beaker. The coffee cup calorimeter is not used to measure the enthalpy of hydrogen and oxygen as they involve gases that can escape the cup.

Learn more about coffee cup calorimeter here:

https://brainly.com/question/4390364

#SPJ2

We're given the [OH⁻] as 8.34 × 10⁻¹² M. Using the formula pOH = -log[OH⁻], the pOH of this solution would be -log(8.34 × 10⁻¹²) ≈ 11.08.

The pOH is, for lack of a better term, the "opposite" of pH: A pOH of 7 is neutral; a pOH less than 7 is basic; and a pOH greater than 7 is acidic.

This follows from the relation, pH + pOH = 14. In this case, with a pOH of 11.08, our pH would be 14 - 11.08 = 2.92, which is acidic (pH < 7).

Thus, the correct answer choice is B.

Answer:

15.4%

Explanation:

If Ka = 0.54 mM = 1.51x10⁻⁵

Then;

C₄H₈O₂               -------->            C₄H₇O₂⁻          +           H⁺

I                    0.54x10⁻³                             0                                0

E                   0.54x10⁻³(1-x)                      0.54x10⁻³x                0.54x10⁻³x

Recall that x is the percentage degree of dissociation

From the ICE table;

Ka = [C₄H₇O₂⁻] [ H⁺]/[C₄H₈O₂]

1.51x10⁻⁵=(0.54x10⁻³x) (0.54x10⁻³x)/ 0.54x10⁻³(1-x)  

1.51x10⁻⁵ = 0.54x10⁻³x^2/1-x

1.51x10⁻⁵(1-x) = 0.54x10⁻³x^2

1.51x10⁻⁵ - 1.51x10⁻⁵x = 0.54x10⁻³x^2

Hence;

0.54x10⁻³x^2 + 1.51x10⁻⁵x - 1.51x10⁻⁵=0

x^2 + 0.028x - 0.028 = 0

Solving the quadratic equation here;

x = 0.154 or −0.182

Ignoring the negative result, x = 0.154

Hence, fraction of butanoic acid that is in the dissociated form in this solution = 15.4%

Answer:

In paper chromatography, the wet moving edge of the solvent that progresses along the surface where the separation of the mixture is occurring.

Explanation:

I hope this helps and pls mark me brainliest :)

Answer:

a. pH = 2.04

b. pH = 3.85

c. pH = 8.06

d. pH = 11.56

Explanation:

The nitrous acid is a weak acid (Ka = 5.6x10⁻⁴) that reacts with NaOH as follows:

HNO₂ + NaOH → NaNO₂(aq) + H₂O(l)

a. At the beginning there is just a solution of 0.12M HNO₂. As Ka is:

Ka = [H⁺] [NO₂⁻] / [HNO₂]

Where [H⁺] and [NO₂⁻] ions comes from the same equilibrium ([H⁺] = [NO₂⁻] = X):

5.6x10⁻⁴ = X² / 0.15M

8.4x10⁻⁵ = X²

X = [H⁺] = 9.165x10⁻³M

As pH = -log [H⁺]

b. At this point we have HNO₂ and NaNO₂ (The weak acid and the conjugate base), a buffer. The pH of a buffer is obtained using H-H equation:

pH = pKa + log [NaNO₂] / [HNO₂]

Where pH is the pH of the buffer,

pKa is -log Ka = 3.25

And [NaNO₂] [HNO₂] could be taken as the moles of each compound.

The initial moles of HNO₂ are:

0.100L * (0.15mol / L) = 0.015moles

The moles of base added are:

0.0800L * (0.15mol / L) = 0.012moles

The moles of base added = Moles of NaNO₂ produced = 0.012moles.

And the moles of HNO₂ that remains are:

0.015moles - 0.012moles = 0.003moles

Replacing in H-H equation:

pH = 3.25 + log [0.012moles] / [0.003moles]

c. At equivalence point all HNO2 reacts producing NaNO₂. The volume added of NaOH must be 100mL. That means the concentration of the NaNO₂ is:

0.15M / 2 = 0.075M

The NaNO₂ is in equilibrium with water as follows:

NaNO₂(aq) + H₂O(l) ⇄ HNO₂(aq) + OH⁻(aq) + Na⁺

The equilibrium constant, kb, is:

Kb = Kw/Ka = 1x10⁻¹⁴ / 5.6x10⁻⁴ = 1.79x10⁻¹¹ = [OH⁻] [HNO₂] / [NaNO₂]

Where [OH⁻] = [HNO₂] = x

[NaNO₂] = 0.075M

1.79x10⁻¹¹ = [X] [X] / [0.075M]

1.34x10⁻¹² = X²

X = 1.16x10⁻⁶M = [OH⁻]

pOH = -log [OH-] = 5.94

pH = 14-pOH

d. At this point, 5mL of NaOH are added in excess, the moles are:

5mL = 5x10⁻³L * (0.15mol / L) =7.5x10⁻⁴moles NaOH

In 100mL + 105mL = 205mL = 0.205L. [NaOH] = 7.5x10⁻⁴moles NaOH / 0.205L =

3.66x10⁻³M = [OH⁻]

pOH = 2.44

pH = 14 - pOH

Answer:

Iodine is a non-metal, but it is lustrous (lustrous is the property of metal) in nature.

Answer:

D. Streak.

Explanation:

A mineral, in simple terms, can be defined as a solid inorganic substance that occurs in a pure form with a specific crystal structure. A mineral is identified based on its physical properties which include luster, color, streak, crystal shape, etc.

The color of the powdered form of a mineral is called a streak. A streak is a useful property in distinguishing sulfide and oxide minerals. To check the color of a mineral, it is rubbed against the surface of a ceramic streak plate or a piece of unglazed ceramic. In its finely powdered form, a mineral is easy to identify.

Therefore, option D is correct.

Answer:

A

Explanation:

The number of protons and neutrons of an element is the same. the electrons are the only thing that can differ.  The atomic number equal the protons and neutrons.

Answer:

a

Explanation:

Answer:

Ali is incorrect.

Explanation:

Ali is wrong because the climate is a study of the weather pattern over a long period of time. You cannot look outside one day and determine the climate because the climate is long-term.

She could say the weather is rainy, because that is short term, but not the climate.

Answer:  If the gazelle population starts to decrease this could lead to some vultures not having enough food to eat

Explanation: This explains the obvious outcome of what would happen.

                     Hope you do well with what your doing :)

                                 Mark as Brainliest please :)

Answer:

ftb

Explanation:

Answer:

formation of shadow is right

Answer:

correct answer is D

Explanation:

When you see a shadow, it is directly behind the object.

Answer:

60.0 mL

Explanation:

Using CAVA = CBVB

CA = 0.300M

VA = 20.0 mL

CB = 0.100M

VB = ?

VB = CAVA

CB

VB = 0.300 * 20/ 0.100

VB = 60.0 mL

Answer: a. A solid melts: [tex]\Delta S=+ve[/tex]

b. a vapor is converted to solid: [tex]\Delta S=-ve[/tex]

c. a liquid freezes:  [tex]\Delta S=-ve[/tex]

d. A solid sublimes:  [tex]\Delta S=+ve[/tex]

e.  a vapor condenses to liquid :  [tex]\Delta S=-ve[/tex]

f. a liquid boils:   [tex]\Delta S=+ve[/tex]

g. dissolving a tablespoon of salt in water:  [tex]\Delta S=+ve[/tex]

h. combustion of gasoline:  [tex]\Delta S=+ve[/tex]

Explanation:

Entropy is the measure of randomness or disorder of a system. If a system moves from  an ordered arrangement to a disordered arrangement, the entropy change is negative and vice versa.

a. A solid melts: The solid is converting to liquid, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.

b. a vapor is converted to solid: The gas  is converting to solid, thus the randomness is decreasing as the molecules are moving close and the intermolecular forces are getting stronger Thus the entropy change [tex](\Delta S)[/tex] is negative.

c. a liquid freezes: The liquid is converting to solid, thus the randomness is decreasing as the molecules are moving close and the intermolecular forces are getting stronger. Thus the entropy change [tex](\Delta S)[/tex] is negative.

d. A solid sublimes: The solid is converting to gas, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.

e.  a vapor condenses to liquid : The gas  is converting to liquid, thus the randomness is decreasing as the molecules are moving close and the intermolecular forces are getting stronger. Thus the entropy change [tex](\Delta S)[/tex] is negative.

f. a liquid boils: The liquid is converting to gas, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.

g. dissolving a tablespoon of salt in water: The solid is converting to ions , thus the randomness is increasing as the ions can move freely. Thus the entropy change [tex](\Delta S)[/tex] is positive.

h. combustion of gasoline: The liquid is converting to gas, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.

A condition in which bones become weak and brittle.

The body constantly absorbs and replaces bone tissue. With osteoporosis, new bone creation doesn't keep up with old bone removal.

thus 2) is correct.

a disease in which bone tissue becomes breakable and thin.

if it helps don't forget to like and Mark me

Answer:

4.92 grams of sodium phosphate (Na₃PO₄) are required to make 125 milliliters of a 0.240 M.

Explanation:

Molarity is a measure of concentration that indicates the number of moles of solute that are dissolved in a given volume.

The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:

[tex]Molarity=\frac{number of moles}{volume}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].

In this case:

Replacing in the definition of molarity:

[tex]0.240 M=\frac{number of moles}{0.125 L}[/tex]

Solving:

number of moles= 0.240 M*0.125 L

number of moles= 0.03 moles

Being the molar mass of sodium phosphate 164 g/mole, that is, the mass of one mole of the compound, you can calculate the mass of 0.03 moles using the following rule of three: if 1 mole of the compound has 164 grams, 0.03 moles contains how much mass?

[tex]mass=\frac{0.03 moles*164 grams}{1 mole}[/tex]

mass= 4.92 grams

4.92 grams of sodium phosphate (Na₃PO₄) are required to make 125 milliliters of a 0.240 M.

Answer:

Wind

Explanation:

Wind turbines make energy by the movement of the natural force on earth called 'wind' and renewable resources are resources that can be made from natural and environment-safe objects or things (e.g. Water, Geothermal Heat, The Sun, and Wind)

Answer:

ok

Explanation:

1d

2c

3b

4a

Answer: The concentration of [tex]H_2SO_4[/tex] is 0.234 M

Explanation:

According to the neutralization law,

[tex]n_1M_1V_1=n_2M_2V_2[/tex]

where,

[tex]n_1[/tex] = basicity [tex]H_2SO_4[/tex] = 2

[tex]M_1[/tex] = molarity of [tex]H_2SO_4[/tex] solution = ?

[tex]V_1[/tex] = volume of  [tex]H_2SO_4[/tex] solution = 50.0 ml

[tex]n_2[/tex] = acidity of [tex]NaOH[/tex] = 1

[tex]M_1[/tex] = molarity of [tex]NaOH[/tex] solution = 0.375 M

[tex]V_1[/tex] = volume of  [tex]NaOH[/tex] solution = 62.5 ml

Putting in the values we get:

[tex]2\times M_1\times 50.0=1\times 0.375\times 62.5[/tex]

[tex]M_1=0.234M[/tex]

Therefore concentration of [tex]H_2SO_4[/tex] is 0.234 M

Answer:

0.525 M

Explanation:

As the problem deals with a dilution process, we can use the following formula:

Where subscript 1 stands for initial concentration and volume, while 2 stands for the final conditions. Meaning that in this case:

We input the data given by the problem:

And solve for C₂:

The answer is 2Hz

To calculate frequency, divide the number of times the event occurs by the length of time.

Answer:

1

because a dwarf star will seemlarge because of the in ability of any human being to see d sun

Answer:

Low-density polyethylene is manufactured by the process of the polymerization of ethylene at very high temperatures in a tubular reactor. In this tubular reactor, high-pressure polymerization allows further copolymerization of ethylene with polar co-monomers. The tubular process has an advantage over autoclave process.

Explanation:

please mark brainliest