plz help i dont understand

A vehicle with a uniform velocity of 10ms^-1 is represented by which of the following graphs

Explanation:

the PE = Weight x g x Height above ground where g is the gravitational constant (9.8m/s^2)

so tge PE = 100 x 9.8 x 25 = 24500 J

Answer:

Por que existe una relación entre dichas magnitudes.

Para un pendulo perfecto de largo L, sabemos que el periodo esta definido como:

[tex]T = 2*\pi *\sqrt{L/g}[/tex]

Donde:

pi = 3.14

L = largo del péndulo

g = aceleración gravitatoria = 9.8 m/s^2

Entonces podemos ver que el periodo es proporcional a la raíz cuadrada de la longitud del péndulo.

Esto es por lo que al analizar datos de un experimento se debería observar una relación entre esas magnitudes.

Answer:

his displacement is 772.85 ft

Explanation:

Given;

initial velocity of his jump, u = 2 ft/s

final velocity of his jump, v = - 223 ft/s

time of motion, t = 7 seconds

acceleration due to gravity, g = 32.17 ft/s²

Let downward motion = positive direction

Let his displacement after 7s = Δh

Apply the following kinematic equation to determine his displacement.

[tex]v^2 = u^2 + 2g\Delta h\\\\(-223)^2 = (2)^2 + (2\times 32.17)\Delta h\\\\49,729 = 4 + 64.34\Delta h\\\\-64.34 \Delta h = 4 - 49,729\\\\-64.34 \Delta h = -49,725\\\\\Delta h = \frac{49,725}{64.34} \\\\\Delta h = 772.85 \ ft[/tex]

Therefore, his displacement is 772.85 ft

Answer:

Gravitational force becomes sixteen times lesser. The strength of the gravitational force between two objects is dependent on their mass. Gravitational force will be weaker if the objects move further away from each other.

This was used to solve for the gravitational force,

G = gravitational constant

m = mass of the first object

M = mass of the second object

d = distance between the two objects

[G * (m*M) / 16d^2] = 1/16

Answer:

When a current-carrying coil is suspended in a uniform magnetic field it is acted upon by a torque. Under the action of this torque, the coil rotates and the deflection in the coil in a moving coil galvanometer is directly proportional to the current flowing through the coil.

Answer:

diffraction phenomenon

Explanation:

When you place your finger in front of a flash, you have a diffraction phenomenon whereby the light fills a part of the space with the first maximum diffraction.

In this case the phenomenon of geometric optics cannot explain the process of bending the beam around an object.

Answer:

False:  Wave lengths on the electromagnetic spectrum are "electromagnetic",

They are transverse waves,

Sound waves are "longitudinal" waves and depend on the motion of the medium of transmission for propagation.

Answer:

Negative acceleration occurs when the acceleration vector points to the left.

1. Object slowing down in the positive direction.

2. Object speeding up in the  negative direction.

Following six statements:

1. T

2. F

3. T

4. T

5. F

6. T

Check direction of acceleration vector.

Answer:

solve it with the formula 1−0.4=0.6, 0.6Vρg=Vρbg where ρb 

Explanation:

The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.

The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=

The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.

The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.In the second case: 1.5fVρg=Vρbg+Vρba=1.5Vρbg⇒fρ=ρb⇒f=0.6.

The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.In the second case: 1.5fVρg=Vρbg+Vρba=1.5Vρbg⇒fρ=ρb⇒f=0.6.Thus, the fraction of immersed volume remains the same.

The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.In the second case: 1.5fVρg=Vρbg+Vρba=1.5Vρbg⇒fρ=ρb⇒f=0.6.Thus, the fraction of immersed volume remains the same.Body will float with 40% of the volume above water surface.

Answer:

Hope this is what you were looking for!

Explanation:

1) So, if we are talking about balancing a straight stick (beam), he could put a finger from each hand on either side of it and move them together. As a result of friction his fingers will meet at the balance point.

2) Method of trial and error.

Answer:

Density=Mass/Volume

            =20/4 kg/m^3

            =5 kg/m^3

Answer:

Consider an isolated system of 2 bodies A & B. An isolated system means where there is no external force acting.Now let F be the force acting on B by A & F be the force acting on A by B.Now rate of change of momentum of A =dpA/dt and rate of change of momentum of B =d pB/dt

thus FAB=d pB/dt (i)......

FBA=dpA/dt (ii)........

Adding 1 and 2 we get FAB+FBA=d pB/dt+dpA/dt =d(pB+pA)/dt

But if no force is applied momentum will also be 0 because no velocity will be there so rate of change of momentum will also be 0

thus d(pA+pB)/dt=0

therefore FAB+FBA=0

or,FAB=-FBA

(3RD LAW OF MOTION)

Answer:

Sirius

Explanation:

On the HR diagram Sirius is the closet.

c) Sirius has a surface temperature and luminosity closest to Phecda

Surface temperature is the temperature at or near a surface. Luminosity is an absolute measure of radiated electromagnetic power (light), the radiant power emitted by a light-emitting object over time.

As it can be observed from the graph attached that Sirius have a surface temperature of about 10,000 K which can be considered as closest to 9500 K comparatively to other stars and if we see the the y coordinate of Sirius which is the luminosity representing axis , then Sirius have a value of luminosity closer to 63

hence correct answer is c)Sirius

learn more about surface temperature  and luminosity :

https://brainly.com/question/15099713?referrer=searchResults

#SPJ2

Answer:

50N to the right

Explanation:

You would find net force by adding the 20 and the 30 together since they are being pushed to the same side (the right). Therefore, the answer will be 50N to the right.

Answer:

more acidic (less base)

hope this helps! :)

Answer:

The number of beats is 10.58 in 35°C.

Explanation:

The beat frequency is given by : f₁-f₂

At 5°C, f₁-f₂ = 4

We need to find the number of beats in 35°C​.

The frequency in a standing wave is proportional to [tex]\sqrt T[/tex].

So,

[tex]\dfrac{f_1-f_2}{f_1'-f_2'}=\dfrac{\sqrt {T}}{\sqrt{T'}}\\\\f_1'-f_2'=(f_1-f_2)\times \dfrac{\sqrt{T'}}{\sqrt{T}}\\\\f_1'-f_2'=4\times \dfrac{\sqrt{35}}{\sqrt{5}}\\\\f_1'-f_2'=10.58[/tex]

So, the number of beats is 10.58 in 35°C.

Answer:

Stimulants are a group of drugs that result in increased activity in the body. Sometimes referred to as “uppers,” these drugs are frequently abused due to their performance-enhancing and euphoric effects. Generally, those who abuse stimulants experience heightened energy levels and enhanced focus.

Stimulants speed up mental and physical processes, which can produce desirable effects in the short-term by increasing levels of dopamine in the brain. While users may feel great due to the short-term effects of stimulants, long-term abuse of these drugs can have significant consequences, which is why it is so important for those who abuse the drugs to get help as quickly as possible.

Explanation:

hope this works

Answer:

a) A = 3 cm,  b)  T = 0.4 s,   f = 2.5 Hz,

2) A standing wave the displacement of the wave is canceled and only one oscillation remains

Explanation:

a) in an oscillatory movement the amplitude is the highest value of the signal in this case

          A = 3 cm

b) the period of oscillation is the time it takes for the wave to repeat itself in this case

          T = 0.4 s

the period is the inverse of the frequency

         f = 1 /T

         f = 1 /, 0.4

         f = 2.5 Hz

2) a traveling wave is a wave for which as time increases the displacement increases, in the case of a transverse wave the oscillation is perpendicular to the displacement and in the case of a longitudinal wave the oscillation is in the same direction of the displacement.

A standing wave occurs when a traveling wave bounces off some object and there are two waves, one that travels in one direction and the other that travels in the opposite direction. In this case, the displacement of the wave is canceled and only one oscillation remains.

Answer:

there it is fella

we neglect the mass data

Answer:

A Permanent magnet or a static magnet

Explanation:

A permanent magnet is an object made from a material that is magnetized and creates its own persistent magnetic field. Materials that can be magnetized, which are also the ones that are strongly attracted to a magnet, are called ferromagnetic (or ferrimagnetic).

Answer:

Motion is one of the important issues of Physics. We know that if we are not moving but still earth is moving. Motion is a bit of the machinist's Department of Physics. Several laws are provided for explaining the theory of motion and evolution in motion. The motion and transformation are defined in terms of strength which is wanted for creating an object in a motion state.

Answer:

Distancia, S = 2.84 metros

Explanation:

Dados los siguientes datos;

Velocidad inicial = 55 m/s

Velocidad final = 115 m/s

Deceleración = 14500 m/s²

Para encontrar qué tan lejos viajaría el automóvil, usaríamos la tercera ecuación de movimiento;

V² = U² + 2aS

115² = 55² + 2*14500*S

13225 = 3025 + 29000S

29000S = 13225 - 3025

29000S = 10200

S = 29000/10200

Distancia, S = 2.84 metros

Answer:

The force is 35808 N.

Explanation:

Power, P = 600 hp = 600 x 746 W = 447600 W

speed, v = 45 km/h = 12.5 m/s

Let the force is F.

P = F v

447600 = F x 12.5

F = 35808 N

Answer:

5

Explanation:

20 x  5 = 100

Answer:

0.3 cm

Explanation:

[tex] \frac{2.4}{8} \\ = 0.3[/tex]

Answer:

u have to purchase it via online e-commerce platforms

Answer:

what your crazy anong pong common paper

Answer:

it begins to move to the right! :)

Answer:

i) densidad

ii) conductividad eléctrica

Explanation:

Las propiedades características de una sustancia se denominan también propiedades intrínsecas. Estas son propiedades que no dependen de la cantidad de sustancia presente.

Las propiedades características se pueden utilizar para identificar una sustancia porque son propiedades que siempre debe exhibir la sustancia.

Entre las opciones, podemos encontrar las siguientes sustancias características;

i) densidad

ii) conductividad eléctrica