plz, help me it's urgent

Answer:

34 mL

Explanation:

We'll begin by calculating the number of mole in 1.25 g of sodium carbonate, Na₂CO₃. This can be obtained as follow:

Mass of Na₂CO₃ = 1.25 g

Molar mass of Na₂CO₃ = (23×2) + 12 + (16×3)

= 46 + 12 + 48

= 106 g/mol

Mole of Na₂CO₃ =?

Mole = mass /molar mass

Mole of Na₂CO₃ = 1.25 / 106

Mole of Na₂CO₃ = 0.012 mole

Next, we shall determine the number of mole HCl needed to react with 0.012 mole of Na₂CO₃.

The equation for the reaction is given below:

Na₂CO₃ + 2HCl —> H₂CO₃ + 2NaCl

From the balanced equation above,

1 mole of Na₂CO₃ reacted with 2 moles of HCl.

Therefore, 0.012 mole of Na₂CO₃ will react with = 0.012 × 2 = 0.024 mole of HCl.

Next, we shall determine the volume of HCl required for the reaction. This is illustrated:

Mole of HCl = 0.024 mole

Molarity of HCl = 0.715 M

Volume of HCl =?

Molarity = mole /Volume

0.715 = 0.024 / volume of HCl

Cross multiply

0.715 × volume of HCl = 0.024

Divide both side by 0.715

Volume of HCl = 0.024 / 0.715

Volume of HCl = 0.034 L

Finally, we shall convert 0.034 L to mL

This can be obtained as follow:

1 L = 1000 mL

Therefore,

0.034 L = 0.034 L × 1000 mL / 1 L

0.034 L = 34 mL

Therefore, 34 mL of HCl is needed for the reaction.

The amount of HCl required for counterbalancing 1.25 g of Na2CO3(Sodium Carbonate) would be:

- [tex]34 ml[/tex]

Given that,

Mass of Na2CO3 [tex]= 1.25 g[/tex]

To find the Moles of Na2CO3, we will find the molar mass of Na2CO3,

Molar Mass of or Na2CO3 [tex]= 106 g/mol[/tex]

So,

Moles of Na2CO3 [tex]= mass /molar mass[/tex]

[tex]= 1.25/106[/tex]

[tex]= 0.012 mol[/tex]

To determine the quantity of HCl required to display the reaction with 0.012 mol of Na2CO3

[tex]Na_{2} CO_{2} + 2HCl[/tex] → [tex]H_{2}CO_{3} + 2NaCl[/tex]

While balancing the equation, we know that [tex]0.012[/tex] × [tex]2 = 0.024 mole of HCl[/tex] is necessary to process the reaction.

Now,

As we know,

HCl moles [tex]= 0.024[/tex]

Molarity of HCl [tex]= 0.715 M[/tex]

∵ Quantity of HCl required = Moles/Molarity

[tex]= 0.024 / 0.715[/tex]

[tex]= 0.034 l[/tex] [tex]or 34ml[/tex]

Thus, 34 ml is the correct answer.

Learn more about 'Molarity' here:

brainly.com/question/12127540

Answer:

Here is the answer from somewhere in the internet

Answer: [tex]2NH_3(g)+2O_2(g)\rightarrow N_2O(g)+3H_2O(l)+684kJ[/tex]

Explanation:

The skeletal thermochemical equation for the reaction is:

[tex]NH_3(g)+O_2(g)\rightarrow N_2O(g)+H_2O(l)+342kJ[/tex]

The balanced  thermochemical equation for the reaction is:

[tex]2NH_3(g)+2O_2(g)\rightarrow N_2O(g)+3H_2O(l)+684kJ[/tex]

When 1 mole of [tex]NH_3[/tex] reacts with oxygen , heat released = 342 kJ

Thus when 2 moles of [tex]NH_3[/tex] reacts with oxygen , heat released = [tex]\frac{2}{1}\times 342 kJ=684kJ[/tex]

It is about 3.86 which is 10⁶⁶ watts

Answer:

410 quintillion Joules or 430,000,000,000,000,000,000 Joules

Answer:

heat

Explanation:

Answer:

Thermal Energy

Explanation:

Answer:

1.34 mol

Explanation:

Molarity, which is the molar concentration of a solution, can be calculated by dividing the number of moles (n) by the volume (V).

That is;

Molarity (M) = n/V

According to the information provided in this question;

M = 2.40M

V = 56.0 mL = 56/1000 = 0.056 L

Since molarity = n/V

number of moles = M × V

n = 0.056 × 24

n = 1.34 mol

Answer:

Cr 6+ & SO4 2-

Explanation:

Sulfate is a polyatomic ion that has a charge of 2-. There are three of them in the chemical formula so it equates to a 6- total charge. Thus, chromium must have a 6+ charge to give the compound a neutral charge.

According to my notes, nucleophilicity order is directly proportional to basicity order in an aprotic medium, and is inversely proportional to basicity order in protic medium. And H2O is a stronger base than H2S, so it should be the strong nucleophile, but the answer is given as H2S is the stronger nucleophile.

hope this helped, good luck <3

Answer:

[tex]V_{7.0}\approx 235ml[/tex]

Explanation:

From the question we are told that

mass of sample [tex]M=72.0 grams[/tex]

volume of water [tex]V=180 mL[/tex]

volume for extraction [tex]V'=60mL[/tex]

partition (distribution) coefficient water [tex]d=10[/tex]

initial extraction removal [tex]x=55.4g[/tex]

Generally the equation for the weight of sample [tex]x_n[/tex]  is mathematically given by

[tex]x_n=x*(\frac{DV}{DV+V'})^n[/tex]

[tex]x_n=55.4(\frac{10*180}{10*180+60})^1[/tex]

[tex]x_n=53.613g[/tex]

Generally the weight extracted [tex]x_e[/tex] is therefore

[tex]w_e=x-x_n[/tex]

[tex]w_e=55.4-53613[/tex]

[tex]w_e=1.787[/tex]

[tex]w_e=1.787[/tex] is extracted with 60ml solvent .

Therefore volume of solvent (y) that would be necessary to remove an additional 7.0g

[tex]V_{7.0}=\frac{60}{1.767}*7[/tex]

[tex]V_{7.0}=235.030ml[/tex]

[tex]V_{7.0}\approx 235ml[/tex]

Answer:

The correct answer is - 4-nitroaniline.

Explanation:

It is given that all three solid compounds salicylic acid + 4-nitroaniline + naphthalene are equal in the ratio in the mixture and then 1 gram of this mixture is dissolved in the diethyl ether and run a drop of the solution on TLC plate. This plate shows three spots.

The salicylic acid and naphthalene would stay dissolved in the diethyl ether solution due to the 4-nitroaniline could be extracted by adding aqueous acid and involve in the aqueous layer and thus spot of 4-nitroaniline would be with largest Rf value.

The methods of fossil formation in dry areas due to a lack of moisture is mummification. The correct option is a.

Mummification is the process of deliberately drying or embalming flesh to preserve the body after death.

This typically entailed removing moisture from a deceased body and desiccating the flesh and organs with chemicals or natural preservatives such as resin.

Mummification served the purpose of keeping the body intact so that it could be transported to a spiritual afterlife.

The body was stripped, positioned on a slanted table, and washed in natron solution (a naturally occurring salt used both as soap and a preservative).

The brain was extracted from the skull through a hole in the ethmoid bone (the bone separating the nasal cavity from the skull cavity).

Thus, the correct option is A.

For more details regarding mummification, visit:

https://brainly.com/question/899330

#SPJ2

Answer:  

1) Endothermic.  

2) [tex]Q_{rxn}=4435.04J[/tex]  

3) [tex]\Delta _rH=15.8kJ/mol[/tex]

Explanation:  

Hello there!  

1) In this case, for these calorimetry problems, we can realize that since the temperature decreases the reaction is endothermic because it is absorbing heat from the solution, that is why the temperature goes from 22.00 °C to 16.0°C.  

2) Now, for the total heat released by the reaction, we first need to assume that all of it is released by the solution since it is possible to assume that the calorimeter is perfectly isolated. In such a way, it is also valid to assume that the specific heat of the solution is 4.184 J/(g°C) as it is mostly water, therefore, the heat released by the reaction is:

[tex]Q_{rxn}=-(15.0g+250.0g)*4.184\frac{J}{g\°C}(16.0-20.0)\°C\\\\ Q_{rxn}=4435.04J[/tex]    

3) Finally, since the enthalpy of reaction is calculated by dividing the heat released by the reaction over the moles of the solute, in this case NH4Cl, we proceed as follows:

[tex]\Delta _rH=\frac{ Q_{rxn}}{n}\\\\\Delta _rH= \frac{ 4435.04J}{15.0g*\frac{1mol}{53.49g} } *\frac{1kJ}{1000J} \\\\\Delta _rH=15.8kJ/mol[/tex]

Best regards!  

Best regards!

Answer:1 2 and 4

Explanation:

Explanation: where the article????

Answer: C

waxes and sterols

Explanation:

edge 2021

Answer:

80 ml

Explanation:

From the question,

Applying Dilution formular

MV = mv................... Equation 1

Where M = Molarity of Kl before dilution, V = Volume of Kl before dilution, m = molarity of Kl after dilution, v = volume of Kl after dilution.

make V the subject of the equation

V = mv/M............. Equation 2

Given: m = 1.00 M, v = 200 ml, M = 2.50 M

Substitute these values into equation 2

V = (1.00×200)/2.50

V = 80 ml

Answer:

Option A

Explanation:

As we know

C1V1 = C2V2

C1 = concentration of solution before dilution

V1 = Volume of solution before dilution

C2 = concentration of solution after dilution

V2 = Volume of solution after dilution

Substituting the given values in above equation, we get -

125 mL * 2.00 M  = X mL * 1.50 M

X mL = 125 mL * 2.00 M  / 1.50 M

X = 167 mL

Hence, option A is correct

Answer:

15.2 grams of calcium chloride are produced and HCl is the limiting reactant.

Explanation:

Hello there!

In this case, according to the described scenario, it is possible to realize that the reaction between hydrochloric acid and calcium hydroxide is:

[tex]2HCl+Ca(OH)_2\rightarrow CaCl_2+2H_2O[/tex]

Whereas there is a 2:1 mole ratio of the acid to the base. In such a way, with the given masses, we can compute how much calcium chloride product is produced due to the chemical reaction via stoichiometry:

[tex]m_{CaCl_2}^{by HCl}=10.0gHCl*\frac{1molHCl}{36.46gHCl}*\frac{1molCaCl_2}{2molHCl} *\frac{110.98gCaCl_2}{1molCaCl_2} =15.2gCaCl_2\\\\m_{CaCl_2}^{by Ca(OH)_2}=10.5gHCl*\frac{1molCa(OH)_2}{74.09gCa(OH)_2}*\frac{1molCaCl_2}{1molCa(OH)_2} *\frac{110.98gCaCl_2}{1molCaCl_2} =15.7gCaCl_2[/tex]

Whereas we infer that the correct amount is 15.2 g since HCl is the limiting reactant as it produces the fewest grams of the desired product. Consequently, the calcium hydroxide is the excess reactant here.

Regards!

Answer: Intermolecular bonds are the forces between the molecules. Intramolecular are the forces within two atoms in a molecule.

Explanation:

Answer:

outside the nucleus

Explanation:

Answer:

27.27%

Explanation:

Answer:

0.3857 litres is the answer

Answer:

Is the question not supposed to be what is the partial pressure of Nitrogen not Sodium

Answer:

As of right now (4-7-2021), the physical science requirement for the SLP certificate must be met by completing coursework in the areas of either chemistry or physics.

Answer:don’t click link ur gonna get ur info taken

Explanation:

Answer:

The correct answer is -

a) Sodium acetate: least Ammonia: _______ Sodium ethoxide: most

b) Sodium acetate: most Sodium chloroacetate: _______ Sodium fluoroacetate: least

c)  Sodium acetate: least Sodium methoxide: most Sodium phenoxide:

Explanation:

A) In this case the basicity can be found by the stability of the base, Sodium acetate is the most stable base due to resonance stabilization of acetate anion. Sodium acetate is the least basic as the lone pair of electrons involved in the resonance here. An ethoxide ion has more electrons to donate an electron pair easily.

Thus, the correct answer is - Sodium acetate is the least basic while sodium ethoxide is the most basic.

B) Fluroacetate gives a very strong acid and the acetate gives the least strong acid among all three as described in case of a), thus, the most basic is acetate and the least is fluoroacetate.

]C) comparing the acidity of the acids formed by the addition of a proton to the anions is an easy and correct way to find the basicity of compounds.

Acetate ion adds a proton ⇒ acetic acid

methoxide adds a proton ⇒ methanol

phenoxide ion adds proton ⇒ phenol

As it is known that the stronger the acid, the weaker is the conjugate base formed by the loss of the proton.

acetic acid is the strongest acid because it can easily give up its proton to form acetate. Methanol is the weakest among all three and hence methoxide anion is the strongest base.

Thus, the correct answer is - sodium acetate is the least basic while sodium methoxide is the most basic.

Answer:

iron and chlorine

Explanation:

The longest continuous carbon chain comprises five carbon atoms connected by single bonds, so the root name will be pentane. There is a methyl group (—CH3) attached to carbon 3 (since this molecule is symmetrical, the methyl substituent will always be on carbon 3 regardless of which end you begin counting). Thus, the name of this molecule would be 3-methylpentane.

Answer:

98.356 ohms is the answer

Answer:

A)Renewable Energy Sources

Explanation: