PLZZZ HELPPPPPPPPPPPPPPPPPPPPP
​

Answer:

a) [NOCl] = 0.968 M

[NO] = 0.032M

[Cl²] = 0.016M

b) [NOCl] = 1.992M

[NO] = 0.008 M

[Cl2]  = 1.004 M

Explanation:

Step 1: Data given

Temperature = 35°C = 308K

K = 1.6 × 10^-5

Step 2: The reaction

2 NOCl(g) ⇌ 2 NO(g) + Cl2(g)

For 2 moles NOCl we'll have 2 moles NO and 1 mol Cl2

Step 3

a. 2.0 mol pure NOCl in a 2.0 L flask

Concentration at the start:

Concentration = mol / volume

[NOCl] = mol / volume

[NOCl] = 2.0 / 2.0 L

[NOCl] = 1.0 M

[NO] = 0 M

[Cl] = 0M

Concentration at the equillibrium

[NOCl] = 1.0M - 2x

[NO] = 2x

[Cl2]= x

K = [Cl2][NO]² / [NOCl]² = 1.6*10^-5

1.6*10^-5 = ((2x)² * x) / (1.0-2x)²

x = 0.016

[NOCl] = 1.0 -  2*0.016 = 0.968 M

[NO] = 2*0.016 = 0.032M

[Cl²] = 0.016M

b. 2.0 mol NOCl and 1.0 mol Cl2 in a 1.0 L flask

Concentration at the equillibrium

[NOCl] = 2.0 mol / 1.0 L = 2.0 M

[NO] = 0 M

[Cl2]= 1.0 mol / 1.0 L = 1.0 M

Concentration at the equillibrium

[NOCl] = 2.0M - 2x

[NO] = 2x

[Cl2]= 1.0 + x

K = [Cl2][NO]² / [NOCl]² = 1.6*10^-5

1.6 *10^-5 = (2x)²*(1.0+x) / ((2.0-2x)²)

1.6 *10^-5= (2x)² * 1 )/2.0²

1.6 *10^-5= 4x² / 4 = x²

x = [tex]\sqrt{1.6 *10^-5}[/tex] = 4.0*10^-3

[NOCl] = 2.0 - 2*0.004 = 1.992M

[NO] = 2*0.004 = 0.008 M

[Cl2] = 1+ 0.004M = 1.004 M

Answer:

còmo supòtànté insígídà pàtàtàk

Answer:

Kc = 0.630

Explanation:

The equilibrium of the thiocyanate system occurs as follows:

FeSCN²⁺(aq) ⇄ Fe³⁺(aq) + SCN⁻(aq)

And equilibrium constant, kc, is:

Kc = [SCN⁻] [Fe³⁺] / [FeSCN²⁺]

Replacing with the gven concentrations:

Kc = 0.639M*0.494M / 0.501M

Answer: The mass of [tex]H_2O[/tex] produced is 2.52 g

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass.  The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of hexane = 1.72 g

Molar mass of hexane = 86.18 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of hexane}=\frac{1.72g}{86.18g/mol}=0.020mol[/tex]

Given mass of oxygen gas = 8.0 g

Molar mass of oxygen gas= 32 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of water}=\frac{8.0g}{32g/mol}=0.25mol[/tex]

The chemical equation for the combustion of hexane follows:

[tex]2C_6H_{14}+19O_2\rightarrow 12CO_2+14H_2O[/tex]

By stoichiometry of the reaction:

If 2 moles of hexane reacts with 19 moles of oxygen gas

So, 0.020 moles of hexane will react with = [tex]\frac{19}{2}\times 0.020=0.19mol[/tex] of oxygen gas

As the given amount of oxygen gas is more than the required amount. Thus, it is present in excess and is considered as an excess reagent.

Thus, hexane is considered a limiting reagent because it limits the formation of the product.

By the stoichiometry of the reaction:

If 2 moles of hexane produces 14 moles of [tex]H_2O[/tex]

So, 0.020 moles of hexane will produce = [tex]\frac{14}{2}\times 0.020=0.14mol[/tex] of [tex]H_2O[/tex]

We know, molar mass of [tex]H_2O[/tex] = 18 g/mol

Putting values in above equation, we get:

[tex]\text{Mass of }H_2O=(0.14mol\times 18g/mol)=2.52g[/tex]

Hence, the mass of [tex]H_2O[/tex] produced is 2.52 g

Explanation:

d=ut+5

d-5=ut

d-5/t=u

!!!!!!!

Answer:

Benzene <  Cyclohexane < CH4

Explanation:

The location of a peak in an NMR spectrum is determined by chemical shift. In 1H NMR, a proton that is strongly shielded, It implies a proton that has a high electron density, is exposed to a low magnetic field, which causes the chemical shift to diminish, resulting in a signal towards the right direction of the spectrum.

However, a de-shielded proton with its electron density reduced is exposed to a high magnetic field, which causes and resulted in a chemical shift and causes it to shift to the left of the spectrum.

Electronegativity is one of the factors that influence the electron density because it decreases the proton's electron density attached to it as well as the ones attached to nearby atoms due to the inductive effect. The impact of an electronegative atom diminishes fast as the distance between them grows.

We can utilize the impact of electronegativity to calculate how much chemical shift will take place in each molecule in this question.

The chemical shift for benzene is = 7.26 ppm

Chemical shift for cyclohexane is = 1.44 ppm

Chemical shift for methane = 0.23 ppm

Thus, in decreasing order, the chemical shift with the lowest shift from left to right is:

Benzene <  Cyclohexane < CH4

Answer:

Số gam muối ăn cần là 76:42,7%=177,986 g

Explanation:

Answer:

attached below

Explanation:

Structure of two acyclic compounds with 3 or more carbons that exhibits one singlet in 1H-NMR spectrum

a) Acetone CH₃COCH₃

Attached below is the structure

b) But-2-yne (CH₃C)₂

Attached below is the structure

Answer:

ZnCl2=ionic

MgS=ionic

CH4=molecular

Explanation:

ZnCl₂=ionic, MgS=ionic and CH₄=molecular compounds.

Thus, Ions with opposing charges that are kept together by electrostatic forces make up ionic compounds. Typically, a metal and a nonmetal combine to make them.

Atoms share electrons through covalent bonds to form molecular compounds.

When atoms of various elements share electrons through covalent bonds, molecules are created, also known as covalent compounds. These compounds consist of molecules made up of joined atoms, and the shared electrons strengthen the bonds between the atoms.

Thus, ZnCl₂=ionic, MgS=ionic and CH₄=molecular compounds.

Learn more about Electrons, refer to the link:

https://brainly.com/question/12001116

#SPJ3

Answer:

Both molarity and molality involves number of moles of solute

Explanation:

Molarity is obtained by dividing the number of moles of solute by the volume of solution in liters. Note that a solution is formed when a solute is dissolved in a given volume of solvent.

Molality, of a solution is obtained by dividing the number of moles of a solute by the number of kilogrammes of solvent.

In both cases, the number of moles of solute is involved. Hence, the number of moles of solute present is common to both molarity and molality calculation.

Answer:

Explanation:

Answer:

Part A

Ag+ is the Lewis acid and NH3 is the Lewis base.

Part B

AlBr3 is the Lewis acid and NH3 is the Lewis base.

Part C

AlCl3 is the Lewis acid and Cl− is the Lewis base.

Explanation:

A Lewis acid is any specie that accepts a lone pair of electrons. Ag^+, AlBr3 and AlCl3 all accepted lone pairs of electrons according to the three chemical reaction equations shown. Hence, they are Lewis acids.

A Lewis base donates a lone pair of electrons. They include neutral molecules having lone pair of electrons such as NH3 or negative ions such as Cl- .

Answer: The molar concentration of acetic acid in the vinegar is 0.539 M.

Explanation:

The formula used is:

[tex]M_1V_1=M_2V_2[/tex]

where,

[tex]M_1[/tex] and [tex]V_1[/tex] are the concentration and volume of base.

[tex]M_2[/tex] and [tex]V_2[/tex] are the concentration and volume of an acid.

Given:

Molar concentration of NaOH = 0.1798 M

Volume of NaOH = 30.01 mL

Volume of acetic acid = 10.0 mL

Now putting all the given values in the above formula, we get:

[tex]M_1V_1=M_2V_2\\\\0.1798M\times 30.01mL=M_2\times 10.0mL\\\\M_2=0.539M[/tex]

Thu, the molar concentration of acetic acid in the vinegar is 0.539 M.

Answer: The standard way to report this result is [tex]32.9\pm 0.3 mL[/tex]

Explanation:

The standard method of representing a result is:

[tex]\text{Calculated value }\pm \text{ Standard deviation}[/tex]

The reporting of a result is done in correct significant figures.

We are given:

Calculated value = 32.9 mL

Standard deviation = 0.3 mL

Rule of significant figures applied when numbers are added or subtracted:

The number having less number of significant figures after the decimal point will determine the number of significant figures in the final answer.

Number of significant figures after the decimal point = 1

Hence, the standard way to report this result is [tex]32.9\pm 0.3 mL[/tex]

Answer:

A form of energy that can be used by cells.

Explanation:

Answer:

On heating, the van der Waals dispersion forces existing then will easily break as it has a low boiling point and sublimates into gas. On heating iodine in the test tube, iodine evolves as violet fuming gas.

Explanation:

Answer:

Carbon is dull, have a low density, and are poor conductors of heat.

Explanation:

Carbon is a non-metal, therefore bearing properties of a non-metal element.

Answer:

Glass 1

Explanation:

Molarity is measured in moles of substance per liter.

For the sake of calculations, let's say that each glass contains 1 mole of juice and 1 liter after it is divided between the glasses. If you add an equal amount of water to glass 1 ( another liter), you now have:

Glass 1 = 1 mole / 2 liters = 0.5 M

Glass 1 = 1 mole/ 1 liter = 1 M

So glass 1 will have a lower molarity

Answer:

3.93g are recovered

Explanation:

Pb(NO3)2 reacts with KCl as follows:

Pb(NO3)2 + 2KCl → 2KNO3 + PbCl2

To solve this question we need to find the moles of each reactant in order to find the limiting reactant:

Moles Pb(NO3)2 -Molar mass: 331.2 g/mol-

5.72g * (1mol/331.2g) = 0.01727 moles

Mole KCl -Molar mass: 74.5513g/mol-

5.85g * (1mol/74.5513g) = 0.07847 moles

For a complete reaction of 0.07847 moles of KCl are required:

0.07847 moles KCl * (1mol Pb(NO3)2 / 2mol KCl) = 0.03923 moles Pb(NO3)2

As there are just 0.01727 moles, Pb(NO3)2 is limiting reactant. Assuming 100% of yield:

Moles PbCl2 = Moles Pb(NO3)2

Mass PbCl2 -Molar mass: 278.1g/mol-

0.01727 moles * (278.1g / mol) = 4.80g

As percent yield is 81.9% = 0.819, the mass of PbCl2 recovered was:

4.80g * 0.819 = 3.93g are recovered

Answer:

C. 12 × 16

Explanation:

Let mH be the mass of atoms of hydrogen and mO be the mass of atoms of oxygen.  The atoms of oxygen have 16 times the mass of atoms of hydrogen. That is,

mO = 16 mH   [1]

Let mX be the mass of the atoms of X. Atoms of element X have 12 times the mass of atoms of oxygen. That is,

mX = 12 mO   [2]

If we substitute [1] in [2], we get

mX = 12 × 16 mH

If mH is 1, we get,

mX = 12 × 16 × 1

mX = 12 × 16

Oxidation is lost of electrons. Reduced is gain of electrons. you can also remember them as OIL RIG.

Answer:

What kind of chemical reaction occurs when fossil fuels and biomass are burned? What is produced in addition to energy?

What is acid rain? Which fossil fuel causes acid rain? What are the chemical reactions that produce the acid?

Difference Between Biomass and Fossil Fuels

In terms of environmental impact, what’s the difference between natural gas, coal, and biomass? Consider both carbon dioxide (CO2) emissions and acid rain.

What’s the difference between nonrenewable and renewable energy sources? Is biomass a renewable energy source?

What’s a new discovery that makes it easier to use biomass as an energy source?

Comparing Biomass with Other Renewable Energy Sources

What are the pros and cons of several renewable energy sources? Renewable energy sources include biomass, wind power, hydropower, solar power, and geothermal power.

Making Recommendations for Energy Choices

Which renewable energy sources should be developed in your area, and why? Consider abundance of the energy source, ease of setup in your area, and cost.

Review the seven questions. Write a few sentences summarizing what you already know about these topics.

Explanation:

Answer:

pH = 8.87

Explanation:

Hydroiodic acid, HI, is a strong acid that reacts with ammonia, NH3, to produce ammonium ion, NH⁴⁺. That means the moles of HI added = moles of NH3 consumed and moles of NH4⁺ produced.

Initial moles NH₄⁺:

0.225L * (0.298mol/L) = 0.06705 moles

Initial moles NH3:

0.225L * (0.478mol/L) = 0.10755 moles

After the reaction the moles are:

0.10755moles NH3 - 0.0560moles = 0.05155 moles NH3

0.06705moles NH4+ + 0.0560moles = 0.12305 moles NH4+

Using H-H equation for weak bases:

pOH = pKb + log ([NH4+] / [NH3])

pKb for ammonia is 4.75, [NH4+] could be the moles of NH4+ = 0.12305mol,

[NH3] = 0.05155moles

Replacing:

pOH = 4.75 + log (0.12305mol / 0.05155moles)

pOH = 5.13

pH = 14-pOH

Answer:

D.) ±0.01 cm?​

Explanation:

Since 32.23 cm has two decimal places, the uncertainty is taken as one-half the last decimal pace.

The last decimal place is 0.03. Half of this is 0.03 cm/2 = 0.015 cm.

Since we cannot go below two decimal places, we ignore the 5 in 0.015 cm.

So, we have our uncertainty as 0.01 cm.

So, the best expression of the uncertainty in the measurement 32.23 cm is ± 0.01 cm.

So, the answer is D. which is ± 0.01 cm.

Answer:

A physical change is a change in form.

A Chemical change is a change in materials.

Explanation:

Example of a physical change would be an ice cube meting.

Example of a chemical change would be mixing food coloring into a cup of water.

Answer:

no halbo ingles

Explanation:

Explanation:

While the sun is an excellent source of energy, not all forms of life can utilize the sun's energy directly. This lesson describes how plants transform the sun's energy into potential energy stored in sugar, how living organisms utilize energy in sugar to perform work, and how the relationship between photosynthesis and cellular respiration is necessary for life.

Create an account

Explanation:

Answer

Open in answr app

Correct option is

C

148

1 atom of Mg=1x24=24

2 atom of N=2x14=28

6 atom of O=6x16=96

Total mass=148

Answer:

SO < CO2 < C3H8

Explanation:

Entropy refers to the degree of disorderliness of a system. The standard molar entropy of a substance refers to the entropy of 1 mole of the substance vunder standard conditions.

The molar entropy depends on the number of microstates in the system which in turn depends on the number of atoms in the molecule.

C3H8 has 11 atoms and hence the highest number of microstates followed by CO2 having three atoms and least of all SO having only two atoms.