Post-Lab Questions
1. A beverage company is having trouble with the production of the dye in their drinks. The color of their drink mix is supposed to be a pale green color, but they often get different results. For each unwanted result, choose the most plausible explanation to help the company improve the formula.
(1pts)
The color of the drink is too pale after adding the dye to the drink because
Choose...too much dye was added to the drink.the water in the drink is evaporating.not enough dye was added to the drink.the wrong dye was added to the drink.
(1pts)
The color of the dye is appearing as red, instead of green because
Choose...too much dye was added to the drink.the water in the drink is evaporating.not enough dye was added to the drink.the wrong dye was added to the drink.
(1pts)
The drink started out the correct color but it is getting darker over time, even though nothing has been added to the drink, because
Choose...too much dye was added to the drink.the water in the drink is evaporating.not enough dye was added to the drink.the wrong dye was added to the drink.
(1pts)
2. Beer's Law states that A=εbc, where A is the absorbance, ε is the molar absorptivity of the solute, b is the path length, and c is the concentration. Identify the experimental evidence from the activity that you have for the dependence of absorbance on each variable.
The evidence for the dependence of absorbance on the variable ε is
increasing the cuvette width increases the absorbance.
changing the compound changes the absorbance behavior.
adding more water decreases the absorbance.
Choose...ABC
(1pts)
The evidence for the dependence of absorbance on the variable b is
increasing the cuvette width increases the absorbance.
changing the compound changes the absorbance behavior.
adding more water decreases the absorbance.
Choose...ABC
(1pts)
The evidence for the dependence of absorbance on the variable c is
increasing the cuvette width increases the absorbance.
changing the compound changes the absorbance behavior.
adding more water decreases the absorbance.
Choose...ABC
(1pts)
3. Describe how you could use the Beer's Law simulation to experimentally determine the best wavelength at which to perform an experiment.
Measure the absorbance for solutions of multiple different solutes and find the minimum absorbance.
Measure the absorbance for solutions with different concentrations and find the slope of the trendline.
Measure the absorbance for the same solution at different wavelengths and find the maximum absorbance.
Measure the absorbance for the same solution in different cuvette sizes and find the y-intercept.

Answers

Answer 1

Answer:

1. not enough dye was added to the drink.

The wrong dye was added to the drink

the water in the drink is evaporating

2. Changing the compound changes the absorbance behavior.

3. Measure the absorbance for the same solution in different cuvette sizes and find the y-intercept.

Explanation:

When the beverage company adds dye to the drink, there should be standard quantity added to the drink so that the color of the drink remains constant. When too much dye is added to the drink, the color will get dark brown or black. When the color of drink get lighter than green this means dye is not added in required quantity.


Related Questions

A student dropped a piece of nickel metal into a solution of HCl(aq). He observed the formation of gas bubbles and collected the gas into another test tube. The student performed a splint test and observed that the splint flared up when he placed the splint into the test tube of the gas. What can be said about the results of this students experiment?

a. The student performed the splint test incorrectly. He should of observed a popping sound when the splint was placed in the test tube.
b. The experiment was performed incorrectly. Nickel doesn't react with HCl. Therefore, the student picked up the wrong metal when conducting the experiment.
c. The student completed the experiment correctly and there were no errors in the experiment.
d. The student performed the splint test incorrectly. He should of observed the flame being extinguished when the splint was placed in the test tube.

Answers

Answer:

a. The student performed the splint test incorrectly. He should of observed a popping sound when the splint was placed in the test tube.

Explanation:

It is given that a student performed an experiment where he dropped a nickel metal in to HCl solution. He observed the reaction and performed a splint test in the test tube that is filled with a gas which is formed while Nickle is dropped into the solution of HCl.

But the experiment that the student performed was incorrect. He must have observed the popping sound when the splint was placed in the test tube.

When the splint was added to the gas splint flared up. The hydrogen gas pops out when exposed to the flame.

[tex]$Ni + HCl(aq) = NiCl + H_2$[/tex]

Thus the correct option is (a).

b) What is the change in entropy of the reaction if ΔH° = -3.2 kJ mol-1?

Answers

I would go w A I just took the test it was very way I got straight b on it

this was in my science test just want to see if anyone knows?? the wording is so confusing

the relative atomic mass of an element compares the mass of an atom of an element with the mass of an atom of.......

Answers

Answer:

the molar mass of the element

which selection is an example of an electrolyte
a. potassium iodide in water
b. sucrose in water
c. pentane in octane
d. methanol in water

Answers

Answer:

i believe its A, potassium iodide in water

Explanation:

A. Potassium iodide in water

How many molecules of C 2H 5Br will be present if you had 4.52 g of this compound?

Answers

okay ty what what happened to me lol lolhope this helps i lol lol oh yeah that’s okay lol lol yeah lol lol !!! hope it helps :)

The volume of a single tantalum atom is 1.20×10-23 cm3. What is the volume of a tantalum atom in microliters?

Answers

Answer:

1.20x10⁻²⁰μL

Explanation:

1cm³ is equal to 1milliliter. As we must know, 1milliliter = 1000 microliters, 1000μL. To convert the 1.20x10⁻²³mL we need to use the conversion factor: 1mL = 1000μL.

The volume of tantalum in μL is:

1.20x10⁻²³mL * (1000μL /1L) = 1.20x10⁻²⁰μL

what type of properties change ina physical change? Give an example to support your answer?



pls quick who will give the answer first will get the brainliest​

Answers

Explanation:

We can observe some physical properties, such as density and color, without changing the physical state of the matter observed. Other physical properties, such as the melting temperature of iron or the freezing temperature of water, can only be observed as matter undergoes. A physical change physical change involves a change in physical properties. Examples of physical properties include melting, transition to a gas, change of strength, change of durability, changes to crystal form, textural change, shape, size, color, volume and density.

hope it helps.stay safe healthy and happy.

"All plants perform photosynthesis. The cactus on my windowsill is a plant, therefore it must be performing photosynthesis." This statement is an example of:

Group of answer choices

Deductive Reasoning

Logical Fallacy

Inductive Reasoning

Bias

Answers

Answer:

Deductive reasoning

refer to pic plssss

Answers

Answer:

fgufyifyifyiyduhyufyiddjyfjyf86yif

Determine the percentage of carbon and hydrogen in ethane C2H6 if the molecular weight is 30.

Answers

Answer:

Percentage of carbon:

[tex] { \tt{ = \frac{24}{30} \times 100\%}} \\ = 80\%[/tex]

Percentage of hydrogen:

[tex]{ \tt{ = \frac{6}{30} \times 100\%} } \\ = 20\%[/tex]

Consider an acid-base titration in which the base is dispensed from a burette into a flask containing an acid. If any drops of the base adhere to the inner walls of the flask, but do not actually mix with the solution, the calculated acid concentration would be

Answers

Answer:

Higher than the actual value

Explanation:

Titration is a volumetric process in which a known volume of solution is dispensed from a burette to react with a known volume of solution in a conical flask.

When acid-base titration is carried out in such a way that the base is in the burette and the acid is in the conical flask and drops of the base adhere to the inner walls of the flask, but do not actually mix with the solution, the calculated acid concentration would be higher than the actual value.

This is because;

From CA= CBVBnA/VAnB

When VB(volume of base) that reacted is lower than the actual volume recorded, then the calculated volume of CA(concentration of acid) is much higher than the actual value since drops of the base adhere to the inner walls of the flask.

show in chemistry the fermentation of carbohydrate to form alcohol

Answers

hope it helps to everyone

g 250. mL of a solution is created and has a molarity of 1.50 M. What is the molality of this solution if the volume and density of the pure solvent is about the same as the volume and density of the final solution and the density of the pure solvent is 1.15 g/mL

Answers

Answer:

1.30 m

Explanation:

First we calculate the number of moles of solute in the solution, using the definition of molarity:

Molarity = moles / litersConverting 250 mL ⇒ 250 / 1000 = 0.250 Lmoles = 1.50 M * 0.250 L = 0.375 moles

Then we calculate the mass of solvent, using the given volume and density:

1.15 g/mL * 250 mL = 287.5 gConverting 287.5 g to kg ⇒ 287.5 / 1000 = 0.2875 kg

Now we calculate the molality of the solution:

molality = moles of solute / kg of solvent = 0.375 mol / 0.2875 kgmolality = 1.30 m


A cation is a

negative electrode.
negatively charged ion.
positively charged ion.
positive electrode

Answers

Answer:

Each electrode attracts ions that are of the opposite charge. Positively charged ions, or cations, move toward the electron-providing cathode, which is negative; negatively charged ions, or anions, move toward the positive anode.

(S)-CH3CH(N3)CH2CH2CH3 can be synthesized by an SN2 reaction. Draw the structures of the alkyl chloride and nucleophile that will give this compound in highest yield.

Answers

Answer:

See explanation and image attached

Explanation:

Let us recall that the reaction in question is expected to happen by SN2 mechanism. This is because, the reaction occurs at secondary carbon atom and the attacking nucleophile (N3^-) is a good nucleophile.

The reaction occurs via a backside attack of the N3^- ion on (R)-2-chloropentane. This backside attack leads to inversion of configuration at the reaction centre to yield (S)-CH3CH(N3)CH2CH2CH3.

The images of the alkyl halide and nucleophile are shown in the image attached to this answer.

Predict the products of each reaction, and whether the solution at equilibrium will be acidic, basic, or neutral.1. P4O10 + 6H2O (l)---->2. Na2O + H2O(l) ------>3. N2O5 + 3H2O (l)------>

Answers

Answer:

For 1: The product is phosphoric acid and the solution is acidic in nature.

For 2: The product is sodium hydroxide and the solution is basic in nature.

For 3: The product is nitric acid and the solution is acidic in nature.

Explanation:

For the given options:

(1): When diphosphorus pentoxide reacts with water, it leads to the formation of phosphoric acid, which makes the solution acidic in nature.

The chemical equation for the reaction follows:

[tex]P_4O_{10}+6H_2O(l)\rightarrow 4H_3PO_4(aq)[/tex]

(2): When disodium oxide reacts with water, it leads to the formation of sodium hydroxide, which makes the solution basic in nature.

The chemical equation for the reaction follows:

[tex]Na_2O+H_2O(l)\rightarrow 2NaOH(aq)[/tex]

(3): When dinitrogen pentoxide reacts with water, it leads to the formation of nitric acid, which makes the solution acidic in nature.

The chemical equation for the reaction follows:

[tex]3N_2O_5+3H_2O(l)\rightarrow 6HNO_3(aq)[/tex]

according to the kinetic molecular theory what happens to a liquid when it is transferred from one container to another

Answers

Answer:

See explanation

Explanation:

Liquids are known to have a definite volumes but not a definite shape. This means that a liquid takes on the volume of the container in which it is found.

Hence, when a liquid is transferred from one container to another, the volume of the liquid remains the same but the shape of the liquid changes.

This happens when the two containers do not possess the same shape.

9) Describe a method that could be used to extract lead from lead oxide (11). You will need
to include charcoal, an ignition (or test) tube and a Bunsen burner. Make sure
you include
each step and what safety measures you would take?

Answers

Answer:

Explained below.

Explanation:

In order to extract lead from lead oxide, we need to add carbon from coke to the lead oxide.

We will need;

A bunsen burner

A test tube

Charcoal

First step is to heat charcoal in an oxygen free environment. The safety measure here to ensure an oxygen free environment is to add some zinc metal powder into the test tube in order to remove any atmospheric oxygen inside the container.

Secondly, we will now put charcoal inside the test tube and turn on the bunsen burner to heat it until coke is formed.

Thirdly, we now introduce lead oxide into the coke inside the test tube and the carbon in the coke reacts with the lead oxide to produce lead and carbon dioxide.

Throughout all this process, since we required an oxygen free environment inside the test tube, whenever the test tube is opened, its neck must immediately be warmed by heat with the tube placed in a horizontal direction or very close to being in that horizontal direction so that any movement of air moves outwards from the tube.

Consider the balanced chemical equation below.

2 A ⟶ C + 4 D

How many moles of D would be produced if 6 moles of A were used?

Answers

Explanation:

[tex]here \: is \: your \: explanation : - \\ \\ given \: balanced \:equation \: = > \\ \\ 2 A=>C \: + \: 4D \\ \\ by \: this \: equation \: we \: get \: \\ \\ 2 \: moles \: of \: A \: produce \: 4 \: moles \: \\ \\ of \: D \\ \\ hence \: . \: 1 \: mole \: can \: produce \: = 4 \div 2 \\ \\ = > 2 \: moles \: \\ \\ so \: if \: 6 \: moles \: of \: A \: used \: then \: \\ \\ amount \: of \: D \: produced \: = (6 \times 2) \\ \\ = > 12 \: moles \: of \: D \\ \\ \mathcal\blue{ Hope \: it \: helps \: you \: (. ❛ ᴗ ❛.) }[/tex]

Balance the following reactions and identify the species that have been oxidized and the species that have been reduced.
CL2 +I- -------------> I2 +CL-
WO2 + H2 ---------------> W + H2O
CA + H2O -----------------> H2 + CA(OH)2
AL+ O2 --------------------> AL2O3

Answers

Answer:

Balance the following reactions and identify the species that have been oxidized and the species that have been reduced.

CL2 +I- -------------> I2 +CL-

WO2 + H2 ---------------> W + H2O

CA + H2O -----------------> H2 + CA(OH)2

AL+ O2 --------------------> AL2O3

Explanation:

Oxidation is the process where an atom loses electrons.

During oxidation, the oxidation number of the atom increases.

Reduction is the process where an atom gains electrons.

During reduction, the oxidation number of the atom decreases.

The balanced chemical equations for the given reactions are shown below:

[tex]Cl_2 +2I^- -> I_2 + 2Cl^-[/tex]

Iodine undergoes oxidation and chlorine undergoes reduction.

[tex]WO_2 +2 H_2 -> W+ 2 H_2O\\[/tex]

In this reaction, W (tungsten) undergoes reduction and hydrogen undergoes oxidation.

[tex]Ca+2 H_2O ->H_2+Ca(OH)_2\\[/tex]

Ca undergoes oxidation and hydrogen undergoes reduction.

[tex]4Al+3O_2->2Al_2O_3\\[/tex]

Al undergoes oxidation and oxygen undergoes reduction.

Para formar bronce, se mezclan 150g de cobre a 1100°C y 35g de estaño a 560°C. Determine la temperatura final del sistema.
Dato: Ce Cu: 0,093 cal/gºC; Ce Sn: 0,060 cal/gºC

Answers

Answer:

[tex]T_F=1029\ºC[/tex]

Explanation:

¡Hola!

En este caso, dada la información, es posible determinar que la temperatura del sistema estará entre 560 °C y 1100 °C, por lo tanto, se hará necesario establecer la suma de la energía del cobre y del estaño como cero:

[tex]Q_{Cu}+Q_{Sn}=0[/tex]

Así, podremos escribir esta ecuación en términos de masas, calores específicos y temperaturas como sigue:

[tex]m_{Cu}C_{Cu}(T_F-T_{Cu})+m_{Sn}C_{Sn}(T_F-T_{Sn})=0[/tex]

Con el fin de resolver para la temperature final:

[tex]T_F=\frac{m_{Cu}C_{Cu}T_{Cu}+m_{Sn}C_{Sn}T_{Sn}}{m_{Cu}C_{Cu}+m_{Sn}C_{Sn}}[/tex]

Así, reemplazamos las variables conocidas como se muestra a continuación:

[tex]T_F=\frac{150g*0.093cal/g\ºC*1100\°C+35g*0.060cal/g\ºC*560\°C}{150g*0.093cal/g\ºC+35g*0.060cal/g\ºC}\\\\T_F=1029\ºC[/tex]

¡Saludos!

What change would increase the amount of solid solute able to be dissolved in liquid water?
Decreasing rate of stirring
Decreasing surface area
Increasing pressure
Increasing temperature

Answers

Answer:

D: Increasing temperature

Explanation:

From collision theory, we know that the more the increase in collisions, the faster the rate of the chemical reaction.

Now, the amount of solid solute in a solvent will change with a corresponding change in temperature. What we mean is that, the higher the temperature increases, the higher the number of collisions between the solvent molecules as well as leading to an increase in the solute particles which will mean an increase in the amount of the solid solute dissolved. The correct answer is option D.

Answer:

Increasing temperature.

Explanation:

what is the machine used to check melting point called?​

Answers

Answer:

Melting-point apparatus

How many ozone molecules can each chlorine atom in the stratosphere destroy

Answers

Answer:

100,000

Explanation:

3. Does entropy increase or decrease in the following processes?
A. Complex carbohydrates are metabolized by the body, converted into simple sugars.
Answer: Increase
es-lesund
B. Steam condenses on a glass surface.
Answer:
decreare
-->
MgCl2(s)
C. Mg(s) + Cl2(g)
correct
Answer:

Answers

Answer:

HOPE IT helps much as you can

What quantity of heat is transferred when a 150.0g block of iron metal is heated from 25.0°C to 73.3°C? What is the direction of the heat flow?​

Answers

The direction of heat flow is increased which means blocks temperature is higher and hotter than it was before

Which one of the following compounds does NOT obey the "octet rule"?

LiF
BF3
H20
CBr4

Answers

Answer:

BF3

Explanation:

The octet rule describes atoms' preference and affinity for having eight (8) electrons in their valence shell. Whenever an atom is encircled by eight(8) electrons, it forms a stable configuration. This octet can be composed of its' own electrons as well as some shared electrons. In the periodic table, only the s-block and p-block electrons are considered for the octet rule.

However, out of the given option, only BF3 does not comply with the octet rule: This is because the Bromine contains 2 lone pairs of electrons and 3 other shared bonded pairs of electrons with Flourine making a total of 10 electrons in the valence shell and which does not conform with the octet rule.

Please help me, I don't bite. 3.

Answers

Answer:

jjjjjjjjj

Explanation:

hhhhhhhhhhh

The Bohr model of the atom explains why emission spectra are discrete. It could also be used to explain the photoelectric effect. Which is a correct explaination of the photoelectric effect according to the model

Answers

Answer:

photoelectric effect, phenomenon in which electrically charged particles are released from or within a material when it absorbs electromagnetic radiation. The effect is often defined as the ejection of electrons from a metal plate when light falls on it.

1 or 2 topics or two lessons should be explained in an illustrated childrens book minimum of 10 pages must have 3 or more sentences

Answers

Answer:

Yes because same topic are long

Other Questions
Solve the inequality x^2+7x+10< 0 Which form of communication is preferred if only an overview of a subject needs to be told? PLEASE ANYONE definition of a percent increase? Que cantidad se obtiene al resolver la siguiente operacion: [4+{(2-5)2-4(7-5)3+2(15/3)}]- Raiz cuadrada de 16 the pressure of a sample of helium in a 0.150 L container is 1520 torr. if the helium is compressed to the volume of 0.012 L without changing the temperature what would be the pressure of the gas Individuals can differentiate themselves by making human capital investments, just as a firm can differentiate itself by paying higher wages.A. TrueB. False Tracey Sales Co. has predicted the following costs for this year for 500,000 units: Manufacturing Selling and Administrative Variable $ 800,000 $250,000 Fixed 1,200,000 300,000 Total $2,000,000 $550,000 What is the markup on variable manufacturing costs needed to break even what is the formula for finding the length of a line on the cartesian plane. Exactly how many planes contain points J, K, and N?a - 0b - 1c - 2d - 3 Please answer base on the video. The question is in the image. Which two detalls best reflect the author's view of the department?adapted from The Cloakby Nikolai GogolWhen and how he entered the department, and who appointed him, no one could remember. However much the directors and chiefs of allkinds were changed, he was always to be seen in the same place, the same attitude, the same occupation-always the letter-copying clerksothat it was afterwards affirmed that he had been born in uniform with a bald head. No respect was shown him in the department. The porternot only did not rise from his seat when he passed, but never even glanced at him, any more than if a fly had flown through the reception-room,His superiors treated him in coolly despotic fashion. Some insignificant assistant to the head clerk would thrust a paper under his nose withoutso much as saying, "Copy," or, "Here's an interesting little case," or anything else agreeable, as is customary amongst well-bred officials, and hetook It, looking only at the paper, and not observing who handed it to him, or whether he had the right to do so, simply took it, and set aboutcopying it she doesn't reach the school on time .remove not Given that a:b = 4 : 5 and a : c = 3 : 4,find the ratio of 5b : 3c Peterson Company billed its customers a total of $840,000 for the month of November. The total includes a 5% state sales tax.(a) Determine the proper amount of revenue to report for the month.(b) Prepare the general journal entry to record the revenue and related liabilities for the month. a nano second is what Find the values of x and y that make these triangles congruent by the HL theorem m.c.m (35;50)m.c.d (35;50)m.c.m (116;92)m.c.d (116;92) What is the value of x? What value of x is in the solution set of [tex]3(x - 4) \geqslant 5x + 2[/tex]A. -10B. -5C. 5D. 10 what is the solution to the equation below? 6x=2x+24