Predict the organic starting material needed to prepare the following product upon treatment with warm hydrochloric acid. CI Cl 석C HCI 40 *C H,C CH HC

Answer:

a) Tripling the concentration of a reactant increases the rate of a reaction nine times.the order of the reaction with respect to that reactant is 2

b)Increasing the concentration of a reactant by a factor of four increases the rate of a reaction four times.the order of the reaction with respect to that reactant is 1.

Explanation:

a) The order of the reaction with respect to that reactant is 2. The rate law of the reaction with the stoichiometric coefficients a, b, and c would be as follows:

rate = k[A]^x[B]^y[C]^z

Where k is the rate constant and x, y, and z are the orders of the reaction with respect to the corresponding reactants. When [A] is tripled, the rate increases nine times, indicating that the rate is proportional to [A]^2. Therefore, the order of the reaction with respect to [A] is 2.

b) The order of the reaction with respect to that reactant is 1. The rate law of the reaction with the stoichiometric coefficients a, b, and c would be as follows:

rate = k[A]^x[B]^y[C]^z

When [A] is quadrupled, the rate increases four times, indicating that the rate is proportional to [A]. Therefore, the order of the reaction with respect to [A] is 1.

To know more about concentration of a reactant refer here:https://brainly.com/question/4600091#
#SPJ11

Answer:

43.1gramms

Explanation:

change the temperatures to kelvin

90--363

40--313

50grams of water are saturated at 90 degree celcius.

then,

50___363

x_____313

then cross multiply

363x=15650

divide both sides by 363

x=43.1gramms

Nitration of toluene takes place in four steps which include formation of nitronium ion, formation of electrophile, deprotonation, and elimination of  HNO₃.

The mechanism for the nitration of toluene showing explicitly why ortho and para products are favored over meta is as follows:

Step 1: Formation of the Nitronium Ion

NO₂⁺ is formed by nitric acid's reaction with sulfuric acid.

2HNO₃ + H₂SO₄ → 2 NO₂⁺ + 2HSO₄⁻ + H₃O⁺

The following is the formation of a nitronium ion:

Step 2: Formation of the electrophile

A nitronium ion is created, which is the electrophile. Because of the strong electron-releasing effect of the methyl group, the nitronium ion is drawn to the ring.

Due to the stability of the resulting carbocation, ortho and para products are favored over meta. In this, the bond on the methyl carbon is broken and the electrophile is added to it:

Step 3: Deprotonation: After the nitration reaction, an intermediate is formed in which a proton has been extracted from the methyl group. The formation of this intermediate indicates that the electrophile has been added to the ring's ortho or para positions.

Step 4: Elimination of HNO₃: An acid base reaction occurs to complete the nitration process, yielding nitrotoluene, HNO₃, and sulfuric acid. Here the intermediate is used to illustrate that the reaction has occurred with the ortho product. This reaction may also result in a para product in a similar manner.

Learn more about Nitration here:

https://brainly.com/question/26927899

#SPJ11

Answer:

Explanation:

To calculate the standard enthalpy of formation for TICL(I), we need to use the given thermochemical equations and Hess's law. The equation for the formation of TICL(I) is:

C(s) + TiO₂ (s) + 2Cl(g) → TICL(I) + CO(g)

Using the given equations for the formation of CO(g) and TiO2(s), we can manipulate them to get the necessary reactants for the formation of TICL(I):

Ti(s) + O₂(g) → TiO₂(s) (reverse the equation)

C(s) + 1/2O₂(g) → CO(g) (multiply by 2)

Adding these two equations, we get:

Ti(s) + 2C(s) + O₂(g) → TiO₂(s) + 2CO(g)

This equation is the reverse of the equation given for the formation of TICL(I), so we need to flip its sign to get the correct value for the enthalpy change:

TICL(I) → C(s) + TiO₂ (s) + 2Cl(g) + CO(g)

ΔH° = -(-394 kJ/mol + 286 kJ/mol + 0 + (-221 kJ/mol))

ΔH° = -(-329 kJ/mol)

ΔH° = +329 kJ/mol

Therefore, the correct value for the standard enthalpy of formation for TICL(I) is +329 kJ/mol, which is option D.

57.0 ml of 0.90 m solution of Hcl was diluted by water. the pH of this diluted solution is 0.90. 50.5 mL water was added to the original solution .

There are a few steps to solve this.

Here they are: First, calculate the initial concentration of HCl in the solution.

Molarity = moles of solute / volume of solution in liters.

The volume of the solution is 57.0 mL, which is 0.0570 L.

The molarity is 0.90 M. So,0.90 M = moles of HCl / 0.0570 L

Now we can solve for moles of HCl:

moles of HCl = 0.90 M x 0.0570 L = 0.0513 mol

Next, we need to use the pH to find the concentration of H+ ions.

pH = -log[H+]0.90 = -log[H+]

Solving for [H+],

we get:[H+] = 7.94 x 10^-1 M

Finally, we can use the concentration of H+ ions to find the new volume of the solution after dilution using the equation:[H+] x V = moles of HCl7.94 x 10^-1 M x V = 0.0513 mol

Solving for V,

we get: V = 6.47 x 10^-2 L

To find how much water was added,

we subtract the final volume from the initial volume:

Volume of water added = 57.0 mL - 6.47 mL = 50.5 mL (rounded to 3 significant figures)

Therefore, 50.5 mL of water was added to the original solution.

For more such questions on pH , Visit:

https://brainly.com/question/172153

#SPJ11

When two protons are fired toward each other in a particle accelerator, with only the electrostatic force acting, then their kinetic energy keeps increasing, acceleration keeps decreasing, kinetic energy keeps decreasing, electric potential energy keeps decreasing.

The electrostatic force is a force that arises between electrically charged objects. It is the force exerted on a charged particle by other charged particles or electromagnetic fields. It is a fundamental force in nature that has an infinite range and can be either attractive or repulsive. The strength of the electrostatic force is proportional to the inverse square of the distance between the charged particles. As two charged particles move closer together, the force between them increases. Therefore, as the two protons move closer together, their kinetic energy and electric potential energy will increase.

According to Coulomb's law, the electrostatic force is inversely proportional to the square of the distance between the two charges. Therefore, as the distance between the two protons decreases, the electrostatic force acting between them will increase. As a result, their acceleration will keep decreasing. At the same time, as the protons move closer together, their kinetic energy will keep increasing while their electric potential energy will keep decreasing.

Learn more about Electrostatic force here:

https://brainly.com/question/9774180

#SPJ11

When you mix baking soda and vinegar, a chemical reaction occurs that produces carbon dioxide gas, water, and a type of salt called sodium acetate.

Before: Before mixing baking soda and vinegar, they are both in their separate states. Baking soda is a white powder, and vinegar is a clear liquid.

During: When you mix the baking soda and vinegar, the baking soda (sodium bicarbonate) reacts with the vinegar (acetic acid) to produce carbon dioxide gas (CO2), water (H2O), and sodium acetate (NaC2H3O2).

After: After the chemical reaction has taken place, you will see bubbles of carbon dioxide gas being released. The solution will also become cloudy as the sodium acetate precipitates out. The resulting mixture may feel warmer due to the exothermic nature of the reaction (meaning it releases heat).

Learn more about baking soda in vinegar:https://brainly.com/question/2427021

#SPJ1

Reduction involves the gain of electrons, and reactions for which the standard cell potential is negative are spontaneous under standard conditions.

Reduction- In a chemical reaction, the process of gaining one or more electrons is known as reduction. It is the opposite of oxidation, which is the loss of electrons in a reaction.

Reduction is the method of reducing the oxidation state of a substance. The reduction of carbon dioxide to glucose during photosynthesis is an example of a biological reduction. The reduction of iron oxides into elemental iron during the blast furnace process is an example of an industrial reduction.

To learn more about "reduction", visit: https://brainly.com/question/21851295

#SPJ11

The change in mass of the Zn electrode is, y = (x * molar mass of Zn) / molar mass of Cu.

The reaction in the cell involves the transfer of electrons from zinc (Zn) to copper (Cu). The net ionic equation for the reaction is:

Cu²⁺ + Zn --> Cu + Zn²⁺

During the reaction, the mass of the Cu electrode decreases due to the loss of Cu^2+ ions, while the mass of the Zn electrode increases due to the gain of Zn^2+ ions. The change in mass of the Zn electrode can be related to the change in mass of the Cu electrode using the stoichiometry of the reaction.

From the net ionic equation, we can see that for every Zn atom oxidized (loses electrons), one Cu^2+ ion is reduced (gains electrons). Therefore, the moles of Cu lost must be equal to the moles of Zn gained. We can use the molar mass of Cu and Zn to relate the change in mass of the Cu electrode (x grams) to the change in mass of the Zn electrode (y grams) as follows,

moles of Cu lost = moles of Zn gained

(x grams of Cu) / (molar mass of Cu) = (y grams of Zn) / (molar mass of Zn)

Solving for y, the change in mass of the Zn electrode is:

y = (x * molar mass of Zn) / molar mass of Cu

To know more about electrode, here

brainly.com/question/17060277
#SPJ4

When NaF is dissolved in water, it undergoes hydrolysis to form Na+ and F- ions. The resulting solution is slightly basic, with a pH slightly greater than 7. The correct answer is C) NaF.

Salts are ionic compounds formed from the reaction between an acid and a base. They are composed of positively charged ions (cations) and negatively charged ions (anions). Salts are typically solid at room temperature and have high melting and boiling points.

When dissolved in water, salts can dissociate into their component ions, allowing them to conduct electricity. Some common examples of salts include table salt (NaCl), baking soda (NaHCO3), and Epsom salt (MgSO4).

When NaF is dissolved in water, it undergoes hydrolysis to form Na+ and F- ions. The F- ions react with water molecules to form HF and OH- ions. The resulting solution is slightly basic, with a pH slightly greater than 7.

Learn more about salts here https://brainly.com/question/13818836

#SPJ1

The volume of the gas will decrease from 20 cm³ to 13.08 cm³.

Boyle's law is a gas law that states that the product of the pressure and volume of a gas is constant at constant temperature.

Assuming no change in temperature is significant because it allows us to apply Boyle's law to solve the problem. If the temperature were to change, we would need to use a different gas law, such as Charles's law or the combined gas law, to account for the change in temperature.

We can use Boyle's law to solve this problem, which states that the product of the pressure and volume of a gas is constant at constant temperature. Mathematically, we can express this as P₁V₁ = P₂V₂, where P₁ and V₁ are the initial pressure and volume, respectively, and P₂ and V₂ are the final pressure and volume, respectively.

Using this equation, we can solve for V₂:

P₁V₁ = P₂V₂

V₂ = (P₁V₁)/P₂

Substituting the given values, we get:

V₂ = (510 mmHg x 20 cm³) / 780 mmHg

V₂ = 13.08 cm³

Therefore, if the pressure is increased from 510 mmHg to 780 mmHg at constant temperature, the volume of the gas will decrease from 20 cm³ to 13.08 cm³.

Learn more about Boyle's law here:

https://brainly.com/question/30367133

#SPJ1

The percent recovery is the ratio of the actual amount of the desired substance to the original amount present. The total percent recovery can be calculated by using the formula given below.

The units and the correct significant digits should be used in the calculation. We expect that the percent recovery will be less than 100 % for this experiment because of the loss of product due to impurities or mistakes in the experimental procedure. For example, if the product is left on the filter paper while washing, then the actual yield will be less than the theoretical yield.

Calculate the total percent recovery. show calculation with units and correct significant digits. The percent recovery formula is:

Percent recovery = Actual yield ÷ Theoretical yield × 100%

Given, Actual yield = 70 theoretical yield = 80

percentage recovery = Actual yield ÷ Theoretical yield × 100 %

Percentage recovery = 70 ÷ 80 × 100 %

Percentage recovery = 0.875 × 100 %

Percentage recovery = 87.5 %

Therefore, the total percent recovery is 87.5 % with the correct significant digits. Why do we expect that the percent recovery will be less than 100 % for this experiment? We expect that the percent recovery will be less than 100 % for this experiment because of the loss of product due to impurities or mistakes in the experimental procedure.

Learn more about  percent recovery at brainly.com/question/14972210

#SPJ4

The carbon that is attached to the oxygens in CH₃COOH (acetic acid) is sp2 hybridized. This is because it is attached to three atoms (one oxygen and two hydrogens) and has a trigonal planar geometry.

The molecule with the greatest dipole moment is CH₂Cl₂(dichloromethane) because it has a tetrahedral geometry and the two C-Cl bonds are oriented in opposite directions, creating a net dipole moment. The other molecules (CCl₄, CF₄, and Br₂CCl₂) are all symmetric and have zero dipole moment.

A chemical concept known as hybridization describes the bonding and geometry of molecules. It entails combining atomic orbitals to create hybrid orbitals, which can more accurately capture the bonding in a molecule. The number of hybrid orbitals formed is equal to the number of atomic orbitals combined. Atomic orbitals with similar energy levels are merged to create the hybrid orbitals. An atom's geometry, bond angles, and polarity can all be impacted by hybridization, which can then have an impact on the molecule's reactivity and physical characteristics. Foreseeing the forms and characteristics of molecules as well as explaining their chemical behaviour requires an understanding of atom hybridization.

Learn more about hybridization here:

https://brainly.com/question/30010106

#SPJ4

Option A is the correct statement for the process was exothermic that a large amount of heat is released when sodium metal is exposed to chlorine gas.

Learn more about sodium chloride: https://brainly.com/question/28106660

#SPJ11

The size of particles has an effect on the rate of dissolving, but temperature is also a significant factor that affects how quickly a solid will dissolve in water. Lowering the temperature slows down the movement.

Temperature is a measure of the average kinetic energy of the particles in a substance or system. In simpler terms, it is a measure of how hot or cold something is. The temperature of a substance or system is commonly measured in degrees Celsius (°C) or degrees Fahrenheit (°F), and it can be influenced by various factors such as heat transfer, pressure, and the presence of other substances. Temperature is an important physical property that affects many aspects of daily life, including weather patterns, cooking, and the functioning of electronic devices. It is also a critical factor in many scientific processes, such as chemical reactions, phase transitions, and the behavior of materials at the atomic and molecular level.

To know more about temperature visit:

https://brainly.com/question/11464844

#SPJ1

The idea of punctuated equilibrium asserts that some evolutionary changes may not even involve intermediate forms.

The idea of punctuated equilibrium is a theory in evolutionary biology that proposes that most evolutionary changes occur relatively rapidly, with long periods of stability punctuated by rare instances of rapid evolutionary change.

The theory was first introduced by Niles Eldredge and Stephen Jay Gould in 1972 as a challenge to the traditional Darwinian theory of gradualism, which posits that evolution proceeds slowly and steadily over long periods of time.

According to punctuated equilibrium, some evolutionary changes may not even involve intermediate forms.

There are several examples of punctuated equilibrium in the fossil record, including the Cambrian explosion, which saw the sudden appearance of most major animal phyla in a relatively short period of time, and the rapid diversification of mammals following the extinction of the dinosaurs at the end of the Cretaceous period.

Learn more about Punctuated equilibrium here:

brainly.com/question/4430933

#SPJ11

The ability of an atom during bond formation to attract electrons from its bonding partner is called electronegativity. The higher the electronegativity of an atom, the stronger its electron-attracting ability.

Let's understand this in detail:

Electronegativity is the power of an atom or molecule to attract electrons to itself in a covalent bond. An atom's electronegativity is influenced by its atomic number, the number of protons in the atom's nucleus.

The electronegativity of an atom is higher when its valence shell is nearly empty or nearly full.

Electronegativity increases from left to right across a period because of the increasing effective nuclear charge, which is the force of attraction between the positively charged atomic nucleus and the negatively charged electrons.

Electronegativity decreases down a group due to the increasing distance between the valence electrons and the positively charged nucleus.

Francium has the lowest electronegativity, while fluorine has the highest electronegativity.

Learn more about electronegativity: What is electronegativity and how can it be used in determining the polarity of nonpolar​? https://brainly.com/question/18258838

#SPJ11

If a substance is removed from a reaction in equilibrium, the equilibrium will shift towards the side where the concentration was higher.

A substance is a category of stuff with certain physical and chemical qualities as well as a set or definite composition. A substance might be an element or a compound. A substance made up of atoms with the same atomic number, or the same number of protons in their atomic nuclei, is referred to as an element.

This is known as the Le Chatelier's principle, which holds that a system in equilibrium would react to any stress by trying to counteract the stress and return to equilibrium. When a drug is removed from the reaction mixture, the system is put under stress due to the substance's lower concentration. The balance will change in a way that increases the production of the substance that was eliminated in order to counteract this drop.

To know more about substance, visit:

https://brainly.com/question/24372098

#SPJ1

Answer:

D

Explanation:

I had this question before :)

a) potassium hydrogen tartrate (KHC4H4O6) is acidic. Ka is calculated for the acidic characteristics of the molecule. When a proton is donated by the molecule to water, it forms the ion HCO4-. b) Kb = [C4H4O6-2][OH-]/[HC4H4O6-], Kb = (1.0 × 10-11) × [C4H4O6-2][OH-]/[HC4H4O6-]. c) As the ion HC4H4O6- is an acidic ion, it will have acidic characteristics in solution. It is because the ion can donate protons and act as an acid.

Kb is calculated for the basic characteristics of the molecule. The balanced chemical equation for the reaction is as follows:HC4H4O6-(aq) + H2O(l) ⇌ C4H4O6-2(aq) + OH-(aq)The Kb is determined using the equation given below : Kb = [C4H4O6-2][OH-]/[HC4H4O6-]The Ka value is calculated as shown below: Kb = [C4H4O6-2][OH-]/[HC4H4O6-]Kb = (1.0 × 10-11) × [C4H4O6-2][OH-]/[HC4H4O6-]

The balanced chemical equation for the reaction is as follows: HC4H4O6(aq) + H2O(l) ⇌ HCO4-(aq) + H3O+(aq)The Ka is determined using the equation given below : Ka = [HCO4-][H3O+]/[HC4H4O6]Ka = (1.0 × 10-3) × [HCO4-][H3O+]/[HC4H4O6]. Therefore, the Ka value is not given.

Know more about potassium hydrogen tartrate here:

https://brainly.com/question/11127999

#SPJ11

The molecule which would have the highest boiling point is 2-methylhexane. Thus, the correct option will be D.

The boiling point is the temperature at which the vapor pressure of a liquid is equal to the external pressure. The boiling point of a liquid is a measure of its vapor pressure. The higher the boiling point, the higher the vapor pressure of the liquid, and the more heat is required to vaporize it.

The boiling point of a substance is affected by the strength and types of intermolecular forces. The stronger the intermolecular forces, the higher the boiling point. 2-methylhexane has highest boiling point because it has the highest number of carbons and branches, which contribute to its strong intermolecular forces that lead to a higher boiling point.

Therefore, the correct option is D.

Learn more about Boiling point here:

https://brainly.com/question/25777663

#SPJ11

Real gases behave most like ideal gases under conditions of high temperature and low pressure. Option 2 is correct.

This is because at high temperatures, the kinetic energy of gas molecules increases, causing them to move faster and collide more frequently, which reduces the intermolecular forces between the gas molecules. At low pressures, the gas molecules are farther apart and the intermolecular forces are weaker, allowing the gas molecules to move more freely and behave more like an ideal gas.

At high pressures and low temperatures, the gas molecules are closer together and the intermolecular forces are stronger, causing deviations from ideal gas behavior. Hence the correct option is 2.

To know more about ideal gas, here

brainly.com/question/28257995

#SPJ4

a) The total pressure of the mixture is 434 torr

b) The mass of each gas is, N₂ = 40.56 g, O₂ = 21.76 g, He = 3.20 g

a) The total pressure of the mixture is calculated by adding all the values of partial pressures of the N₂, O₂, and He

215 torrs of N₂ + 102 torr of O₂ + 117 torr of He

= 434 torr

Thus, the total pressure of the mixture is 434 torr

b) The mass of each gas in the 1.35 L sample of the mixture at 25.0 C can be calculated using the ideal gas law: PV = nRT.

The amount of each gas present is equal to the total moles of gas, n, in the sample.

n = (PV)/(RT)

where P is the partial pressure of the gas in the mixture,

V is the volume of the sample (1.35 L),

R is the ideal gas constant (0.08206 L atm mol⁻¹ K⁻¹), and

T is the temperature in Kelvin (298.15 K).

For N₂: n = (215 torr x 1.35 L)/(0.08206 L atm mol⁻¹ K⁻¹ x 298.15 K) = 1.45 moles
For O₂: n = (102 torr x 1.35 L)/(0.08206 L atm mol⁻¹ K⁻¹ x 298.15 K) = 0.68 moles
For He: n = (117 torr x 1.35 L)/(0.08206 L atm mol⁻¹ K⁻¹ x 298.15 K) = 0.80 moles

The mass of each gas is equal to the moles multiplied by the molar mass of the gas:

For N₂: 1.45 moles x 28.01 g/mol = 40.56 g
For O₂: 0.68 moles x 32.00 g/mol = 21.76 g
For He: 0.80 moles x 4.00 g/mol = 3.20 g

Thus, the mass of each gas is, N₂ = 40.56 g, O₂ = 21.76 g, He = 3.20 g.

Learn more about partial pressure here:

https://brainly.com/question/14119417

#SPJ11

The percent by weight of acetic acid in the vinegar is  3.27% for the given 5.54-g sample of vinegar was neutralized by 30.10 ml of 0.100 m NaOH.

Vinegar is a solution of acetic acid, HC₂H₃O₂, dissolved in water. A 5.54-g sample of vinegar was neutralized by 30.10 mL of 0.100 M NaOH. Find the percentage of acetic acid by weight in vinegar. As per the question, vinegar is a solution of acetic acid, HC₂H₃O₂, dissolved in water.

A 5.54-g sample of vinegar was neutralized by 30.10 mL of 0.100 M NaOH.

Since NaOH and HC₂H₃O₂ reacts in a 1:1 molar ratio, moles of NaOH used = moles of HC₂H₃O₂ in vinegar

So,0.100 mol/L solution of NaOH = 0.100 mol/L solution of HC₂H₃O₂ in vinegar (as they react in 1:1 ratio).

Also, Volume of NaOH = 30.10 mL = 30.10/1000 = 0.0301L

Thus, Amount of HC₂H₃O₂ in vinegar = 0.100 mol/L × 0.0301 L = 0.00301 mol.

Molar mass of HC₂H₃O₂ = 60.05 g/mol.

Weight of HC₂H₃O₂ in 5.54 g vinegar = 0.00301 mol × 60.05 g/mol = 0.18086 g.

Percentage by weight of acetic acid in the vinegar = 0.18086 / 5.54 × 100 = 3.27%.

Read more about moles here:

https://brainly.com/question/15356425

#SPJ11

The Ka for the unknown weak acid (HA) with a molar mass of 85.0 g/mol will be about 9.26 × 10⁻¹⁴.

The formula for calculating the freezing point depression of a solution is:

ΔTf = Kf × m × i

where, ΔTf is the change in freezing point, Kf is the freezing point depression constant, m is the molality of the solute, and i is the van't Hoff factor.

To calculate the molar mass of the unknown weak acid, we need to convert grams to moles:

2.55 g ÷ 85.0 g/mol = 0.03 molHA

We can then calculate the molality of the solution by dividing the moles of solute by the mass of the solvent in kilograms:

0.03 mol ÷ 0.250 kg = 0.12 mol/kg

ΔTf can be calculated by subtracting the freezing point of the pure solvent (water) from the freezing point of the solution:

0.258°C - 0°C = -0.258°C

The freezing point depression constant (Kf) for water is 1.86 °C/m. We can use this value, along with the molality of the solution, to solve for the dissociation constant (Kb) for the unknown weak acid:

ΔTf = Kf × m × i

0.258°C = 1.86 °C/m × 0.12 mol/kg × i

i = 1.08

Ka can be calculated using the relationship between Ka and Kb for an acid:

Kb = Kw / Ka

Kw is the ion product constant for water, which is 1.00 × 10⁻¹⁴ at 25°C. We can use this value, along with the value we just calculated for Kb, to solve for Ka:

Kb = Kw / Ka

1.08 = 1.00 × 10⁻¹⁴ / Ka

Ka = 9.26 × 10⁻¹⁴

So, the Ka for the unknown weak acid is 9.26 × 10⁻¹⁴.

Learn more about Freezing point depression here:

https://brainly.com/question/12844810

#SPJ11

The volume occupied by 0.108 mol of helium gas at a pressure of 0.92 atm and a temperature of 313 K is 2.3 L.

The gas laws involve the relationship between the pressure, volume, and temperature of a gas. The ideal gas law can be used to determine the volume of gas that a certain amount of substance occupies at a particular pressure and temperature. The ideal gas law equation is:

PV = nRT

where, P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin (K).

To determine the volume of helium gas that is occupying 0.108 moles at 0.92 atm and 313 K, we need to rearrange the ideal gas law equation to solve for V:

V = (nRT)/P

Substituting the values given, we have:

V = (0.108 mol)(0.08206 L atm/mol K)(313 K)/(0.92 atm)

V = 2.28 L

The volume of gas to two significant figures, the volume is 2.3 L.

Learn more about Volume of gas here:

https://brainly.com/question/15265703

#SPJ11

The reagent(s) for the given transformation is "A B C D E F G H I", which is t-BuOK, OsO4, NMO, O3, DMS, H2, Pt, H2, Lindlar's cat., xs HBr, BH3.THF, H202, NaOH, MeONa, Br2, hv.

Transformation is the process of changing something into a different form or state. It can involve altering the physical characteristics, behaviors, attitudes, or perceptions of an entity. Transformation is a process that occurs in a variety of contexts including business, education, technology, and personal development.

A) t-BuOK - For the given transformation, the initial step is to add an alkoxide, here t-BuOK, to the starting material.
B) OsO4, NMO - After the addition of the alkoxide, the resulting intermediate has to be oxidized by OsO4 and NMO reagents.
C) 1) O3; 2) DMS - The intermediate then has to be ozonolyzed using ozone and dimethyl sulfide (DMS).
D) H2, Pt - The ozonolysis will result in a mixture of aldehyde and ketone. The aldehyde has to be hydrogenated using H2 and Pt.
E) H2, Lindlar's cat. - The ketone has to be hydrogenated using H2 and Lindlar's catalyst.
F) xs HBr - The product of the hydrogenation has to be converted to a tertiary alcohol by an elimination reaction with HBr.
G) 1) BH3.THF; 2) H202, NaOH - The tertiary alcohol has to be oxidized to a tertiary ketone using BH3.THF, H202 and NaOH.
H) MeONa - The tertiary ketone has to be methylated using MeONa.
I) Br2, hv - The product of the methylation has to be brominated using Br2 and heat.
Therefore, the reagent(s) for the given transformation is "A B C D E F G H I", which is t-BuOK, OsO4, NMO, O3, DMS, H2, Pt, H2, Lindlar's cat., xs HBr, BH3.THF, H202, NaOH, MeONa, Br2, hv.

To learn more about transformation
https://brainly.com/question/382594
#SPJ1

The reaction is given by:C2H6(g) + 3O2(g) → 2CO2(g) + 3H2O(g), o) From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas.  3.92 moles of oxygen gas will react with (1/3) × 3.92 = 1.307 moles of ethane gas. This will produce 1.307 × 2 = 2.614 moles of carbon dioxide gas. q) 6.20 moles of ethane gas will react with 6.20 × 3 = 18.60 moles of oxygen gas. This will produce 6.20 × 2 = 12.40 moles of carbon dioxide gas.r) This means that all the oxygen gas will be consumed in the reaction. Therefore, there will be no excess oxygen gas remaining after the reaction. s) 4.203 moles of ethane gas will be in excess after the reaction.

The equation is now balanced as there are equal numbers of each type of atom on both sides of the equation. 6.20 moles of ethane gas will react with 6.20 × 3 = 18.60 moles of oxygen gas. This will produce 6.20 × 2 = 12.40 moles of carbon dioxide gas. From the balanced chemical equation, we can see that 3 moles of oxygen gas react with 1 mole of ethane gas to produce 2 moles of carbon dioxide gas. Therefore From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas.

From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas. Therefore, 5.69 moles of oxygen gas will react with (1/3) × 5.69 = 1.897 moles of ethane gas. This will produce 1.897 × 2 = 3.794 moles of carbon dioxide gas. This means that 6.10 − 1.897 = 4.203 moles of ethane gas will be in excess after the reaction.

To know more about carbon dioxide gas visit:-

https://brainly.com/question/30615378

#SPJ11

Answer:91

Explanation:because I am just very smart and this is the answer <3

The answer is 2.19×10−2 with three significant figures. The correct number of significant figures is determined by the data with the least amount of significant figures, which in this case is 0.080.

Figure is a term that is used to describe a shape, design, pattern, or form. It can also be used to refer to a diagram or an illustration. Figures are used to explain and illustrate concepts, facts, and phenomena in various fields of study, including mathematics, science, and the humanities. Figures are also used in art, design, and architecture to create visual compositions that have a certain aesthetic appeal. They can be used to represent ideas, concepts, and emotions.

Since 0.080 has three significant figures, the answer must also be rounded to three significant figures.

To learn more about figure
https://brainly.com/question/29827869
#SPJ1

The answer is 2.19×10⁻² with three significant figures. The correct number of significant figures is determined by the data with the least number of significant figures, which in this case is 0.080.

Figure is a term that is used to describe a shape, design, pattern, or form. It can also be used to refer to a diagram or an illustration. Figures are used to explain and illustrate concepts, facts, and phenomena in various fields of study, including mathematics, science, and the humanities. Figures are also used in art, design, and architecture to create visual compositions that have a certain aesthetic appeal. They can be used to represent ideas, concepts, and emotions.

Since 0.080 has three significant figures, the answer must also be rounded to three significant figures.

To learn more about figure, visit:

brainly.com/question/29827869

#SPJ1