Predict the sign and calculate ΔS° for a reaction. Close Problem Consider the reaction H2CO(g) + O2(g)CO2(g) + H2O(l) Based upon the stoichiometry of the reaction the sign of Sºrxn should be _________ . Using standard thermodynamic data (in the Chemistry References), calculate Sºrxn at 25°C. Sºrxn = J/K•mol

Answer:

pH of the buffer is 7.33

Explanation:

The mixture of the ions H₂PO₄⁻ and HPO₄²⁻ produce a buffer (The mixture of a weak acid, H₂PO₄⁻, with its conjugate base, HPO₄²⁻).

To find pH of a buffer we use H-H equation:

pH = pka + log [A⁻] / [HA]

Where A⁻ is conjugate base and HA weak acid.

For the H₂PO₄⁻ and HPO₄²⁻ buffer:

pH = pka + log [HPO₄²⁻] / [H₂PO₄⁻]

Computing values of the problem:

pH =7.21 + log [0.125M] / [0.095M]

pH = 7.33

The given question is incomplete.

The complete question is:

When methane is burned with oxygen, the products are carbon dioxide and water. If you produce 9 grams of water and 11 grams of carbon dioxide from 16 grams of oxygen, how many grams of methane were needed for the reaction?

Answer: 4 grams of methane were needed for the reaction

Explanation:

According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.

{tex]CH_4+2O_2\rightarrow CO_2+H_2O[/tex]

Given:  mass of oxygen = 16 g

Mass of carbon dioxide = 11 g

Mass of water = 9 g

Mass of products = Mass of carbon dioxide + mass of water = 11 g  +9 g = 20 g

Mass or reactant = mass of methane + mass of oxygen = mass of methane + 16 g

As mass of reactants = mass of products

mass of methane + 16 g= 20 g

mass of methane  = 4 g

Thus 4 grams of methane were needed for the reaction

Answer:

rate = [NO]²[H₂]

Explanation:

2NO + H2 ⟶N2 + H2O2 (slow)

H2O2 + H2 ⟶2H2O (fast)

From the question, we are given two equations.

In chemical kinetics; that is the study of rate reactions and changes in concentration. The rate law is obtained from the slowest reaction.

This means that our focus would be on the slow reaction. Generally the rate law is obtained from the concentrations of reactants in a reaction.

This means our rate law is;

rate = [NO]²[H₂]

Answer:

Electrons "surround"

Explanation:

Protons and neutrons "make up" the nucleus so they are contained "within" the nucleus meaning that electrons would "surround" the nucleus as they orbit around the nucleus

Answer:

Electrons

Explanation:

Protons and nuetrons are present inside the nucleus of an atom while the electron revolve around the nucleus in different energy levels.

Answer:

1. 0.00352 M

2. 2HNO3(aq) + Sr(OH)2(aq) -----> Sr(NO3)2(aq) + 2H2O(l)

3. 0.00534 M

Explanation:

1.

Mass of strontium hydroxide= 10.45 g

Volume of solution = 41.00 ml

Number of moles = mass of Sr(OH)2/molar mass of Sr(OH)2 = 10.45g/121.63 g/mol= 0.0859 moles

Molarity= number of moles × volume = 0.0859 ×41/1000 = 0.00352 M

2.

2HNO3(aq) + Sr(OH)2(aq) -----> Sr(NO3)2(aq) + 2H2O(l)

3.

Concentration of acid CA= the unknown

Volume of acid VA= 31.5 ml

Concentration of base CB= 0.00352 M

Volume of base VB= 23.9 ml

Number of moles of acid NA= 2

Number of moles of base NB= 1

From;

CAVA/CBVB = NA/NB

CAVANB= CBVBNA

CA= CBVBNA/VANB

CA= 0.00352 × 23.9 ×2/31.5 ×1

CA= 0.00534 M

A. The molarity of the Sr(OH)₂ solution is 2.09 M

B. The balanced equation for the reaction is

2HNO₃ + Sr(OH)₂ —> Sr(NO₃)₂ + 2H₂O

C. The molarity of the acid, HNO₃ is 3.17 M

A. Determination of the molarity of the Sr(OH)₂ solution

Mass of Sr(OH)₂ = 10.45 g

Molar mass of Sr(OH)₂ = 88 + 2(16 + 1) = 122 g/mol

Mole = mass / molar mass

Mole of Sr(OH)₂ = 10.45 / 122

Mole of Sr(OH)₂ = 0.0857 mole

Volume = 41 mL = 41 / 1000 = 0.041 L

Molarity = mole / Volume

Molarity of Sr(OH)₂ = 0.0857 / 0.041

B. The balanced equation for the reaction.

C. Determination of the molarity of the acid, HNO₃.

From the balanced equation above,

The mole ratio of the acid, HNO₃ (nA) = 2

The mole ratio of the base, Sr(OH)₂ (nB) = 1

From the question given above,

Volume of base, Sr(OH)₂ (Vb) = 23.9 mL

Molarity of base, Sr(OH)₂ (Mb) = 2.09 M

Volume of acid, HNO₃ (Va) = 31.5 mL

MaVa / MbVb = nA/nB

(Ma × 31.5) / (2.09 × 23.9) = 2

(Ma × 31.5) / 49.951 = 2

Cross multiply

Ma × 31.5 = 49.951 × 2

Ma × 31.5 = 99.902

Divide both side by 31.5

Ma = 99.902 / 31.5

Thus, molarity of the acid, HNO₃ is 3.17 M

Learn more: https://brainly.com/question/25651648

Answer:

461.85 degrees Celsius

Answer:

AS WE KNOW THAT , when non-metallic elements gain electrons to form anions, SO sulphur is non metal and have the capacity to gain two electrons as lies in 6th group so it can gain electron and become sulphide ion(S-).

Explanation:

Answer:

The answer is noble gases

Explanation:

Here is your explanation The vertical columns are called groups. There are eighteen groups. The last group on the far right is called the noble, or inert gases. Elements in a group have similar chemical properties. For example, elements in the noble gas group are all gases under. This is the thing from the passege bye god bless you

The last group of elements on the periodic table are called "noble gases."

The noble gases are a group of elements located in Group 18 of the periodic table. They are also known as Group 0 or the "inert gases." The noble gases include helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radon (Rn).

The noble gases are unique because they have a full complement of valence electrons in their outermost energy level. This full electron configuration gives them exceptional stability, making them chemically unreactive or inert under normal conditions. In other words, noble gases are less likely to form chemical bonds with other elements.

Learn more about noble gases from the link given below.

https://brainly.com/question/19024000

#SPJ2

Answer:

Below

Explanation:

Let n be the quantity of matter in the Calcium Bromide

● n = m/ M

M is the atomic weight and m is the mass

M of CaBr2 is the sum of the atomic wieght of its components (2 Bromes atoms and 1 calcium atom)

M = 40.1 + 2×79.9

● 0.422 = m/ (40.1+2×79.9)

●0.422 = m/ 199.9

● m = 0.422 × 199.9

● m = 84.35 g wich is 88.4 g approximatively

88.4 g approximatively is  the mass in grams of 0.442 moles of calcium bromide, CaBr2 ,therefore option (d) is correct.

Mass is the amount of matter that a body possesses. Mass is usually measured in grams (g) or kilograms (kg) .

To calculate mass in grams of 0.442 moles of calcium bromide, CaBr2,

Let n be the quantity of matter in the Calcium Bromide

M is the atomic weight and m is the mass

M of CaBr2 is the sum of the atomic weight of its components

Mass of  Ca = 40.1 , Mass of Br = 79.9

M = 40.1 + 2×79.9

  0.422 = m/ (40.1+2×79.9)

  0.422 = m/ 199.9

  m = 0.422 × 199.9

  m = 84.35 g which is 88.4 g approximatively .

Thus ,88.4 g approximatively is  the mass in grams of 0.442 moles of calcium bromide, CaBr2 , hence option (d) is correct .

Learn more about  mass ,here:

https://brainly.com/question/6240825

#SPJ2

Answer:

The answer is

Explanation:

1 mole of acid.

Hope this helps....

Have a nice day!!!!

A buffer that is 1 M in acid and base will have the greatest capacity of buffer, and therefore the greatest buffer capacity.

A weak acid and the conjugate base of the weak acid, or a weak base and the conjugate acid of the weak base, are combined to form the buffer solution, a water-based solvent solution.

In a biological system, a buffer's keep intracellular and extracellular pH levels within a relatively small range and to withstand pH fluctuations brought on by both internal and external factors.

A buffer is a substance that can withstand a pH shift when acidic or basic substances are added. It may balance out little quantities of additional acid or base, keeping the pH stable.

Thus, 1 M in acid and base solution has the greatest buffer capacity.

To learn more about the buffer solution, follow the link;

https://brainly.com/question/24262133

#SPJ6

Answer:

A. Increasing the temperature will favor forward reaction and more CaCo3 formed.

B. More CaCo3 will be formed.

C. CaCo3 will decrease and more react ants formed.

D. Less CaCo3 will be formed.

E. Iridium is a catalyst so there is no effect

Explanation:

A. Temperature will increase because it's an endothermic reaction.

B. Adding Cao will favor forward reaction and more CaCo3 formed.

C. Removing methane, more react ants are formed and CaCo3 decreases.

D. Irridi is a catalyst so it has no effect on the CaCo3 but only speeds its rate of reaction.

Answer:

True

Explanation:

In pi bonds, the electron density concentrates itself between the atoms of the compound but are present on either side of the line joining the atoms. Electron density is found above and below the plane of the line joining the internuclear axis of the two atoms involved in the bond.

Pi bonds usually occur by sideways overlap of atomic orbitals and this leads to both double and triple bonds.

Answer:

0.5 mol MgCl₂

Explanation:

Step 1: Write the balanced equation

Mg + 2 HCl → MgCl₂ + H₂

In words, 1 mole of Mg reacts with 2 moles of HCl to form 1 mole of MgCl₂ and 1 mole of H₂.

Step 2: Establish the appropriate molar ratio

The molar ratio of HCl to MgCl₂ is 2:1.

Step 3: Calculate the moles of MgCl₂ produced from 1 mole of HCl

1 mol HCl × (1 mol MgCl₂/2 mol HCl) = 0.5 mol MgCl₂

Answer:

it is 2.0, the above one is wrong

Explanation:

I did the test :

Answer:

- Aluminium sulfate Al2(SO4)3 dissociates in two aluminium ions and three sulfate ions, therefore, van't Hoff factor is 5 (incorrect).

Explanation:

Hello,

In this case, since the van't Hoff factor is related with the species that result from the ionization of a chemical compound, we can see that that

- Aluminium sulfate Al2(SO4)3 dissociates in two aluminium ions and three sulfate ions, therefore, van't Hoff factor is 5 (incorrect).

- Ammonium nitrate NH4NO3 dissociates in one ammonium ions and one nitrate ion, therefore, van't Hoff factor is 2 (correct).

- Sodium sulfate Na2SO4 dissociates in two sodium ions and one sulfate, therefore, van't Hoff factor is 3 (correct).

- Sucrose is not ionized, therefore, van't Hoff factor is 1 (correct).

Best regards.

Answer:

a

Explanation:

answer is a on edg

Answer:

Lone pairs cause more repulsion than bond pairs

Explanation:

A lone pair takes up more space around the central atom than bond pairs of electrons. This is because, a lone pair is attracted to only one nucleus while bond pairs are attracted to two nuclei.

Hence the repulsion between lone pairs is far greater than the repulsion between bond pairs or repulsion between a lone pair and a bond pair. The presence of a lone pair therefore distorts a molecule away from the ideal shape predicted on the basis of the valence shell electron pair repulsion theory.

Lone pairs are found to decrease the observed bond angles in a molecule.

Answer:

measure the parallax and use it in calculations

Explanation:

got it right on test

There are many more stars at different distances from the earth. The distance to the stars calculated in light years and it is measured using parallax method.Thus option a is correct.

Parallax method is used to measure the approximate distance of stars from earth. It uses the position of nearby star from two points opposite to earth and the small angular displacement observed from the remote stars are noted.

The orbit radius of earth and distance to the stars can be calculated from the parallactic angle p, that is one second of arc. Thus the distance is described in the units parsec.

The distance to the stars are usually calculated in light years. One parsec equals 3.26 light years. The nearest star to earth is named as proxima century having the distance parallax 0.76813'' which equals 4.24 light years. Thus, parallax is inversely proportional to the distance.

To find more on parallax method, refer here:

https://brainly.com/question/13046118

#SPJ2

Answer:

(R)-but-3-en-2-ylbenzene

Explanation:

In this reaction, we have a very strong base (sodium ethoxide). This base, will remove a hydrogen producing a double bond. We know that the reaction occurs through an E2 mechanism, therefore, the hydrogen that is removed must have an angle of 180º with respect to the leaving group (the "OH"). This is known as the anti-periplanar configuration.

The hydrogen that has this configuration is the one that placed with the dashed bond (red hydrogen). In such a way, that the base will remove this hydrogen, the "OH" will leave the molecule and a double bond will be formed between the methyl and the carbon that was previously attached to the "OH", producing the molecule (R) -but-3- en-2-ylbenzene.

See figure 1

I hope it helps!

Answer:

Empirical formula is: C₂H₅

Explanation:

The chemical equation of burning of a compound that conatins only Carbon and Hydrogen is:

CₓHₙ + O₂ → XCO₂ + n/2H₂O

That means the moles of CO₂ produced are the moles of Carbon in the compound and moles of hydrogen are twice moles of water. Empirical formula is the simplest ratio between moles of each element in the compound. Thus, finding molse of C and moles of H we can find empirical formula:

Moles C and H:

Moles C = Moles CO₂:

7.851g CO₂ ₓ (1mol / 44g) = 0.1784 moles CO₂ = Moles C

Moles H = 2 Moles H₂O

4.018g H₂O ₓ (1mol / 18.01g) = 0.2231 * 2 = 0.4417 moles H

Ratio C:H

The ratio between moles of hydrogen and moles of Carbon are:

0.4417 moles H / 0.1784 moles C = 2.5

That means there are 2.5 moles of H per mole of Carbon. As empirical formula must be given only in whole numbers,

Answer:

Atomic no = 12 = Mg

Explanation:

It is given that,

The atomic number of two elements that are represented by letter Q and R are 9 and 12.

We need to write the electronic configuration of R. Atomic number shows the number of protons in atom.

For R, atomic number = 12

Its electronic configuration is : 2,8,2

It has two valance electrons in its outermost shell. The element is Magnesium (Mg).

Answer:2.62 L

Explanation:

A sample of gas occupies a volume of 2.62 liters at 25° C and 1.00 atm. and the volume at 50° C and 2 atm then volume is 2.62 liters.

The equation of state for a fictitious perfect gas is known as the ideal gas law, sometimes known as the generic gas equation. Although it has significant drawbacks, it is a decent approximation of the behavior of many gases under various situations.

An ideal gas is one in which there are no intermolecular attraction forces and all collisions between atoms or molecules are entirely elastic. It may be seen as a group of perfectly hard spheres that collide but do not else interact with one another.

By using ideal gas equation,

P₁ V ₁ ÷ T = P₂V₂ ÷ T

1 × 2.62 ÷ 25 = 2 × V₂ ÷ 50

V₂ = 1 × 2.62 × 50 ÷ 25 × 2

V₂ = 2.62 liters.

Thus, a sample of gas occupies a volume of 2.62 liters at 25° C and 1.00 atm. and the volume at 50° C and 2 atm then volume is 2.62 liters.

To learn more about ideal gas law follow the link below;

https://brainly.com/question/6534096

#SPJ5

Answer: C. the same amount of energy as

Explanation:

A reversible reaction is a chemical reaction where the reactants form products that, in turn, react together to give the reactants back.

Reversible reactions will reach an equilibrium point where the concentrations of the reactants and products will no longer change.

[tex]A+B\rightleftharpoons C+D[/tex]

Thus if forward reaction is exothermic i.e. the heat is released , the backward reaction will be endothermic i.e. the heat is absorbed and in same amount.

The amount of energy released will be equal and opposite in sign to the energy absorbed in that reaction.

Answer:

C.) the same amount of energy as

Explanation:

I got it correct on founders edtell

Answer:

[tex][H^+]=0.000123M[/tex]

[tex]pH=3.91[/tex]

Explanation:

Hello,

In this case, dissociation reaction for acetic acid is:

[tex]CH_3COOH\rightleftharpoons CH_3COO^-+H^+[/tex]

For which the equilibrium expression is:

[tex]Ka=\frac{[CH_3COO^-][H^+]}{[CH_3COOH]}[/tex]

Which in terms of the reaction extent [tex]x[/tex] could be written as:

[tex]1.74x10^{-5}=\frac{x*x}{[CH_3COOH]_0-x}=\frac{x*x}{0.0010M-x}[/tex]

Thus, solving by using a solver or quadratic equation we obtain:

[tex]x_1=0.000123M\\\\x_2=-0.000141M[/tex]

And clearly the result is 0.000123M, which also equals the concentration of hydronium ion in solution:

[tex][H^+]=0.000123M[/tex]

Now, the pH is computed as follows:

[tex]pH=-log([H^+])=-log(0.000123)\\\\pH=3.91[/tex]

Best regards.

Answer:

All of the above processes have a ΔS < 0.

Explanation:

ΔS represents change in entropy of a system. Entropy refers to the degree of disorderliness of a system.

The question requests us to identify the process that has a negative change of entropy.

carbon dioxide(g) → carbon dioxide(s)

There is  a change in state from gas to solid. Solid particles are more ordered than gas particles so this is a negative change in entropy.

water freezes

There is  a change in state from liquid to solid. Solid particles are more ordered than liquid particles so this is a negative change in entropy.

propanol (g, at 555 K) → propanol (g, at 400 K)

Temperature is directly proportional to entropy, this means higher temperature leads t higher entropy.

This reaction highlights a drop in temperature which means a negative change in entropy.

methyl alcohol condenses

Condensation is the change in state from gas to liquid. Liquid particles are more ordered than gas particles so this is a negative change in entropy.

Answer:

Bakelite is a polymer made up of the monomers phenol and formaldehyde. This phenol-formaldehyde resin is a thermosetting polymer.

Answer: The monomers of bakelite are formaldehyde and phenol

Explanation:

Answer:

AgCl (silver Chloride) is being precipitated out as white and cloudy crystals.

Explanation:

If a student mixes 1.0 mL of aqueous silver nitrate AgNO3 (aq)  with 1.0 mL of aqueous sodium chloride, NaCl (aq), in a clean test tube.

The sodium chloride is being acidified with dilute trioxonitrate (V) acid. Then a few drops of  silver trioxonitrate(V) is added afterwards. A  white precipitate of silver chloride, which dissolves readily in aqueous ammonia indicates the presence of sodium chloride.

The reaction proceeds as follows:

[tex]\mathtt{AgNO_{3(aq)} + NaCl _{(aq)} \to AgCl _{(s)} + NaNO_3_{(aq)}}[/tex]

From the reaction between AgNO3 (aq) and NaCl (aq), AgCl (silver Chloride) is being precipitated out as white and cloudy crystals.

Answer:

A precipitate will form, AgI

Explanation:

When Ag⁺ and I⁻ ions are in an aqueous media, AgI(s), a precipitate, is produced or not based on its Ksp expression:

Ksp = 8.3x10⁻¹⁷ = [Ag⁺] [I⁻]

Where the concentrations of the ions are the concentrations in equilibrium

For actual concentrations of a solution, you can define Q, reaction quotient, as:

Q = [Ag⁺] [I⁻]

If Q > Ksp, the ions will react producing BaCO₃, if not, no precipitate will form.

Actual concentrations of Ag⁺ and I⁻ are:

[Ag⁺] = [AgNO₃] = 2.0x10⁻⁵ × (300mL / 500.0mL) = 1.2x10⁻⁵M

[I⁻] = [NaI] = 2.5x10⁻⁹ × (200mL / 500.0mL) = 1.0x10⁻⁹M

500.0mL is the volume of the mixture of the solutions

Replacing in Q expression:

Q = [Ag⁺] [I⁻]

Q = [1.2x10⁻⁵M] [1.0x10⁻⁹M]

Q = 1.2x10⁻¹⁴

As Q > Ksp

Answer:

The length the divider is to  equilibrium from Part A = 1.30 m and from Part B = 3.70 m

Explanation:

Given that:

A rectangular cube with 3.2 m breadth, 1.2 m height and 5 m in length is splitted into two parts.

The diagrammatic expression for the above statement can be found in the attached diagram below.

The container has a movable airtight divider that divides its length as necessary.

Part A has 58 moles of gas

Part B has 165 moles of a gas.

Thus, the movable airtight divider will stop at a length where the pressure on it is equal on both sides.

i.e

[tex]\mathtt{P = P_A = P_B}[/tex]

Using the ideal gas equation,

PV = nRT

where, P,R,and  T are constant.

Then :

[tex]\mathsf{\dfrac{V_A}{n_A}= \dfrac{V_B}{n_B}}[/tex]

[tex]\mathsf{\dfrac{L_A \times B \times H}{n_A}= \dfrac{L_B \times B \times H}{n_B}}[/tex] --- (1)

since Volume of a cube = L × B × H

From the question; the L = 5m

i,e

[tex]\mathsf{L_A +L_B}[/tex] = 5

[tex]\mathsf{L_A = 5 - L_B}[/tex]

From equation (1) , we divide both sides by (B × H)

Then :

[tex]\mathsf{\dfrac{L_A }{n_A}= \dfrac{L_B }{n_B}}[/tex]

[tex]\mathsf{\dfrac{5-L_B}{58}= \dfrac{L_B }{165}}[/tex]

By cross multiplying; we have:

165 ( 5 - [tex]\mathsf{L_B}[/tex] )  = 58 (

825 - 165[tex]\mathsf{L_B}[/tex]  = 58

825 = 165[tex]\mathsf{L_B}[/tex] +58

825 = 223[tex]\mathsf{L_B}[/tex]

[tex]\mathsf{L_B}[/tex] = 825/223

[tex]\mathsf{L_B}[/tex]  = 3.70 m

[tex]\mathsf{L_A = 5 - L_B}[/tex]

[tex]\mathsf{L_A = 5 - 3.70}[/tex]

[tex]\mathsf{ L_A}[/tex] = 1.30 m

The length the divider is to  equilibrium from Part A = 1.30 m and from Part B = 3.70 m

Answer:

Entropy change of ice changing to water at 0°C is equal to 57.1 J/K

Explanation:

When a substance undergoes a phase change, it occurs at constant temperature.

The entropy change Δs, is given by the formula below;

Δs = q/T

where q is the quantity of heat absorbed or evolved in Joules and T is temperature in Kelvin at which the phase change occur

From the given data, T = 0°C = 273.15 K, q = 15.6 KJ = 15600 J

Δs = 15600 J / 273.15 K

Δs = 57.111 J/K

Therefore, entropy change of ice changing to water at 0°C is equal to 57.1 J/K

The entropy change of ice changing to water will be "57.1 J/K".

The shift in what seems like a thermodynamic system's condition of confusion is caused by the transformation of heat as well as enthalpy towards activity. Entropy seems to be greater mostly in a network with a high quantity or measure of chaos.

According to the question,

Temperature, T = 0°C or,

                          = 273.15 K

Heat, q = 15.6 KJ or,

            = 15600 J

We know the formula,

Entropy change, Δs = [tex]\frac{q}{T}[/tex]

By substituting the values, we get

                                 = [tex]\frac{15600}{273.15}[/tex]

                                 = 57.11 J/K

Thus the above answer is correct.    

Find out more information about Entropy change here:

https://brainly.com/question/6364271