Project A requires a $ 385,000 initial investment for new machinery with a five year life and a salvage value of . The company uses straight - line depreciation . Project A is expected to yield annual net income of $ 23,100 per year for the next five years.

Required:
Compute Project A's payback period.

Answers

Answer 1

Answer:

4.2 years

Explanation:

Here is the complete question

Project A requires a $ 385,000 initial investment for new machinery with a five year life and a salvage value of $44,000. The company uses straight - line depreciation . Project A is expected to yield annual net income of $ 23,100 per year for the next five years.

Required:

Compute Project A's payback period.

Payback = amount invested / cash flow

cash flow = net income + depreciation

depreciation = (cost of asset - salvage value) / useful life

(385,000 - 44,000) / 5 = 68,200

Cash flow = 68,200 + $ 23,100 = 91300

$ 385,000 / 91300 =4.2


Related Questions

An effective minimum wage law can be expected to clear the market for unskilled workers. increase employment for some affected workers. increase the number of firms in those industries where the law is effective. reduce the hours worked for some unskilled workers. all of the above

Answers

Answer:

all of the above

Explanation:

The law related to the effective minimum wage could be predicted for non-skilled workers market, it raised the employment for some workers that are impacted, the number of firms should be increased, it decreased the non-skilled workers hours

So all of the above options is correct as it included all

Recher Corporation uses part Q89 in one of its products. The company's Accounting Department reports the following costs of producing the 8,900 units of the part that are needed every year.

Per Unit
Direct materials $8.20
Direct labor $4.60
Variable overhead $9.10
Supervisor's salary $3.40
Depreciation of special equipment $2.90
Allocated general overhead $1.60

An outside supplier has offered to make the part and sell it to the company for $28.00 each. If this offer is accepted, the supervisor's salary and all of the variable costs, including direct labor, can be avoided. The special equipment used to make the part was purchased many years ago and has no salvage value or other use. The allocated general overhead represents fixed costs of the entire company. If the outside supplier's offer were accepted, only $4,600 of these allocated general overhead costs would be avoided. In addition, the space used to produce part Q89 could be used to make more of one of the company's other products, generating an additional segment margin of $17,800 per year for that product.

Required:
Prepare a report that shows the financial impact.

Answers

Answer:

Recher Corporation

Differential Analysis:

                                      Make           Buy          Difference

Total variable costs  $225,170    $249,200      ($24,030)

General overhead         4,600                                 4,600

Additional segment margin             (17,800)          17,800

Total costs              $229,770     $231,400          ($1,630)

Recher should continue making the part.  It will incur $1,630 additional cost to buy it from the outside supplier than making it in-house.

Explanation:

a) Data and Calculations:

Annual units of Q89 required = 8,900

                                                          Per Unit

Direct materials                                   $8.20

Direct labor                                         $4.60

Variable overhead                              $9.10

Supervisor's salary                             $3.40

Depreciation of special equipment  $2.90

Allocated general overhead              $1.60

Relevant costs:

Direct materials                                   $8.20

Direct labor                                         $4.60

Variable overhead                              $9.10

Supervisor's salary                             $3.40

Variable costs per unit                    $25.30

Total variable costs                           $225,170 (8,900 * $25.30)

Avoidable general overhead                 4,600

Total avoidable production costs = $229,770

Cost of purchasing from outside supplier = $249,200 (8,900 * $28.00)

less additional segment margin                          17,800

Net avoidable purchase costs                        $231,400

External costs occur because Group of answer choices Private costs do not reflect the full costs to society All costs are absorbed by the firm Firms make a choice other than the most cost-efficient production method Government failure increases costs for the firm

Answers

Answer:

Private costs do not reflect the full costs to society

Explanation:

External costs are costs incurred by third parties not involved in production or consumption activities

external cost can either be negative or positive

A good has negative externality if the costs to third parties not involved in production is greater than the benefits. an example of an activity that generates negative externality is pollution. Pollution can be generated at little or no cost, so they are usually overproduced.

A good has positive externality if the benefits to third parties not involved in production is greater than the cost. an example of an activity that generates positive externality is research and development. Due to the high cost of R & D, they are usually under-produced.

Marigold Industries has 8400 equivalent units of production for both materials and for conversion costs. Total manufacturing costs are $123880. Total materials costs are $97000. How much is the conversion cost per unit?a. $12.37. b. $5.10. c. $29.84.d. $17.47.

Answers

Answer:

Wow that’s a lot of numbers hold up

Explanation:

Determine the amount to be paid in full settlement of each purchase invoice, assuming that credit for returns and allowances was received prior to payment and that all invoices were paid within the discount period. Merchandise Freight Paid Returns and by Seller Freight Terms Allowances a. $11,000 $260 FOB shipping point, 1/10, net 30 $1,100 b. $4,200 $101 FOB destination, 2/10, net 45

Answers

Answer:

a. The total cost is:

= ((Cost of goods - Returns) * discount factor) + Freight paid by seller

= ( (11,000 - 1,100) * (1 - 1%)) + 260

= 9,900 * 99% + 260

= $10,061

Note: When shipping is FOB Shipping point, freight is paid by buyer. Discount terms of 1/10 means that a discount of 1% is allowed if settlement is done within 100 days.

b. Total Cost is:

= ( Cost of goods - Returns) * Discount factor

= 4,200 * (1 - 2%)

= $4,116

Note: When shipping is FOB Destination, freight is not paid by buyer. 2/10 discount means 2% discount if settled in 10 days.

An individual or a firm can internalize an externality by​ ___________. A. disputing that an externality exists. B. doubling the size of the externality. C. paying the cost of the externality. D. ignoring the externality.

Answers

Answer:

C. paying the cost of the externality

Explanation:

An externality is defined as cost or benefit that is generated from the activities of a producer, but it is not financially incurred by the producer.

It can be positive or negative externality.

For example if we have a street light the effect on the society does not affect the producer cost wise so it is an externality to him.

When a producer now bears the cost of an externality he is internalizing the externality.

For example if a company polluted the environment with a byproduct of its production process this is a negative externality.

They can internalise it by cleaning up the pollutant from the society.

Use the following information: a. Beginning cash balance on March 1, $72,000. b. Cash receipts from sales, $300,000. c. Budgeted cash payments for direct materials, $140,000. d. Budgeted cash payments for direct labor, $80,000. e. Other budgeted cash expenses, $45,000. Cash repayment of bank loan, $20,000.Prepare a cash budget for the month ended on March 31 for Gado Company. The budget should show expected cash receipts and cash payments for the month of March and the balance expected on March 31.

Answers

Answer:

the budget of the pines is 8 to them b sqare the 4 in you get 12,500

Explanation:

Answer:

no clue

Explanation:

have a good day:)))

Given the following data: Beginning raw materials inventory $30,000 Materials purchased 65,000 Ending raw materials inventory 40,000 What is the amount of raw materials used? a.$5,000 b.$55,000 c.$30,000 d.$75,000

Answers

Answer:

Option "b"$55000 is correct.

Explanation:

Below is the given values:

Starting raw material = $30000

Pruchased material = $65000

Raw material at the end = 40000

Now calculate the raw material used:

Raw material used = Starting raw material  + purchases - ending raw material

Raw material used = 30000 + 65000 - 40000

Raw material used = 95000 - 4000

Raw material used = $55000

Thus option "b"$55000 is correct.

Mary incurred a $20,000 nonbusiness bad debt last year. She also had an $18,000 long-term capital gain last year. Her taxable income for last year was $25,000. During the current year, she unexpectedly collected $12,000 on the debt. How should Mary account for the collection

Answers

Answer: $12000 income.

Explanation:

It should be noted that non business bad debts are regarded as short term capital loss. In the question given, the $18000 long-term capital gain will have to be offset against the bad debt of $20000.

In this case, the tax benefit will be $18000, therefore $12000 will be recognized as the income.

A materials requisition slip showed that direct materials requested were $58,000 and indirect materials requested were $9,000. The entry to record the transfer of materials from the storeroom is:___________A) Work In Process Inventory 58,000Raw Materials Inventory 58,000B) Direct Materials 58,000Indirect Materials 9,000Work in Process Inventory 67,000C) Manufacturing Overhead 67,000Raw Materials Inventory 67,000D) Work In Process Inventory 58,000Manufacturing Overhead 9,000Raw Materials Inventory 67,000

Answers

Answer:

Work In Process Inventory 58,000Manufacturing Overhead 9,000Raw Materials Inventory 67,000

Explanation:

Account titles and explanation           Debit                    Credit

Work In Process Inventory              $58,000

Manufacturing overhead                    $9,000

Raw Materials Inventory                                                 $67,000

Direct  Materials from the storeroom is recorded as  work in process Inventory and is debited, Also Indirect materials is recorded as manufacturing overheads and debited. This should correspond with a  credit to the  raw material inventory.  

What is finance? The study of a business's past financial decisions The study of how to allocate assets to maximize returns The process of communicating financial information about a business The social science that analyzes the production, distribution and consumption of goods and services

Answers

Answer: The study of how to allocate assets to maximize returns

Explanation:

Finance refers to the study of how to allocate assets to maximize returns. Finance refers to the study, management, and creation of money and investments.

Finance simply explains how economic agents such as the individual, company or government gets money and how such money is being used.

Examples of cash equivalents include all of the following EXCEPT U.S. Treasury bills. notes issued by major corporations. money market funds. long-term notes receivable.

Answers

Answer:

long-term notes receivable.

Explanation:

Cash equivalents can be regarded as total cash value that is available on hand, this encompass items that has similarities with cash and must be regarded as current assets. cash or cash equivalents of a company can be seen at top line of the balance sheet.

Examples of cash equivalents are;

✓Treasury bills

✓notes issued by major corporations. ✓money market funds.

Income statement dataSales 6,900Cost of goods sold 6,100Balance sheet dataInventory 680Accounts receivable 300Accounts payable 460Calculate the accounts receivable period accounts payable period, inventory period and cash conversion cycle for the above firm. Use 365 days in a year, do not round intermediate calculations. Round your answers to 1 decimal placea. accounts receivable period _____daysb. account payable period _____daysc. inventory period _____daysd. cash conversion cycle __

Answers

Answer:

a. Accounts receivables period = 365 / (Credit sales/Average accounts receivables)

Accounts receivables period = 365 / (6900/300)

Accounts receivables period = 365 / 23

Accounts receivables period = 15.9 days

b. Accounts payable period = (365/(Cost of goods sold/Accounts payable)  

Accounts payable period = 365 / (6100/460)

Accounts payable period = 365 / 13.26

Accounts payable period = 27.5 days

c. Inventory period = 365 / (Cost of goods sold/Inventory)

Inventory period = 365 / (6100/680)

Inventory period = 365 / 8.97

Inventory period = 40.7 days

d. Cash conversion cycle = Accounts receivables periods + Inventory period - Accounts payable periods

Cash conversion cycle = 40.7 + 15.9 - 27.5

Cash conversion cycle = 29.1 days

DESC
1. How much time, in seconds, does it take to complete one cycle of 60 Hz electric power?
A. 1 second
B. 1/60 second
c./3 second
D. V/120 second

Answers

Answer:

[tex]B) \ \frac{1}{60} \ second[/tex]

Explanation:

Given;

frequency, F = 60 Hz

number of cycles, n = 1

Frequency is defined as the number of complete cycles per seconds.

Mathematically, it is expressed as follows;

[tex]F = \frac{n}{t} \\\\where;\\t \ is \ the \ time \ taken \ to \ make \ the \ complete \ cycle \ (seconds)\\\\t = \frac{n}{F} \\\\t = \frac{1}{60} \ second\\\\The \ correct \ answer \ is \ \ (B) \ \frac{1}{60} \ second[/tex]

Therefore, the time taken to make a cycle of 60 Hz is ¹/₆₀ s

You are buying a laptop and there is two payment plans to consider. Payment plan A is to pay $4,900 now and payment plan B is to pay $500 now and pay $210.30 per month for 30 months. Using an interest of 24%, which payment plan do you choose

Answers

Answer: Plan A has a lower present value and should be chosen.

Explanation:

Choose the one that has the lower present value because that means that it would be cheaper.

Present value of plan A = $4,900

Present value of plan B

= $500 + Present value of $210.30 per month for 30 months

$210.30 is constant so it is an annuity.

Periodic interest rate = 24%/12 = 2%

Present value of annuity = Annuity *  ( 1 - (1 + rate)^-number of periods) / rate

= 210.30 *  ( 1 - (1 + 2%)⁻³⁰) / 2%

= $4,709.97

Present value of plan B = 500 + 4,709.97

= $5,209.97

Choose Plan A because it has a lower present value.

Sandia Corporation manufactures metal toolboxes. It adds all materials at the beginning of the manufacturing process. The company has provided the following information:

Beginning work in process (30% complete) 80,000
Direct materials $80,000
Conversion cost 190,000
Total cost of beginning work in process $270,000
Number of units started 152,000
Number of units completed and transferred to finished goods ?
Ending work in process (50% complete) 68,000
Current period costs
Direct materials $180,000
Conversion cost 314,000
Total current period costs $494,000

Required:
a. Reconcile the number of physical units worked on during the period.
b. Calculate the cost per equivalent unit.

Answers

Answer:

The solution to these questions can be defined as follows:

Explanation:

For point a:

                                     [tex]Physical \ units\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ Physical\ units[/tex]

[tex]Beginning\ units\ \ \ \ \ \ \ \ \ \ \ \ 80000\ \ \ \ \ \ \ \ \ \ \ \ Units\ completed \ \ \ \ \ \ \ \ \ \ \ \ 164000\\\\Units \ started\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 152000\ \ \ \ \ \ \ \ \ \ \ \ Ending\ units\ \ \ \ \ \ \ \ \ \ \ \ \ \ 68000\\\\Total\ units\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 232000\ \ \ \ \ \ \ \ \ \ \ \ Total \ units \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 232000\\\\[/tex]

For point b:

                                  [tex]Equivalent\ units[/tex]

                                 [tex]Physical\ units \ \ \ \ \ \ \ \ \ \ Direct \ materials\ \ \ \ \ \ \ \ \ Conversion[/tex] [tex]Units \ completed\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 164000\ \ \ \ \ \ \ \ \ \ \ \ 164000\ \ \ \ \ \ \ \ \ \ \ \ 164000 \\\\Ending \ inventory\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 68000\ \ \ \ \ \ \ \ \ \ \ \ 68000\ \ \ \ \ \ \ \ \ \ \ \ 34000\\\\Total \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 232000 \ \ \ \ \ \ \ \ \ \ \ \ 232000\ \ \ \ \ \ \ \ \ \ \ \ 198000[/tex]

Carter Industries has two divisions: the West Division and the East Division. Information relating to the divisions for the year just ended is as follows: West East Units produced and sold 33,000 43,000 Selling price per unit $ 8 $ 15 Variable costs per unit 4 5 Direct fixed cost 51,000 113,000 Common fixed cost 43,000 43,000 Common fixed expenses have been allocated equally to each of the two divisions. Carter's segment margin for the West Division is:

Answers

Answer:

$81,000

Explanation:

Segment margin is derived by deducting all expenses that are directly traceable to the segment and it does not include corporate common expenses.

Particulars                         Amount

Contribution                       $132,000  [33,000*(8-4)]

Less: Direct fixed cost      ($51,000)

Segment Margin               $81,000

So, Carter's segment margin for the West Division is $81,000.

The purposeful use of symbols to allow multiple interpretations of messages is called:____.
a. strategic ambiguity.
b. crisis communication.
c. interaction management.
d. conflict management.
e. customer service management.

Answers

Answer:

a. strategic ambiguity.

Explanation:

The use of strategic ambiguity permits the views for diversify or interpretations also at the same time it promotes inclusiveness and unity

The mission and vision sttaement should be confused and normal in nature in order to provide the accomodation

So the use of symbols for permitting out the multiple interpretations of messages is known as the strategic ambiguity

Therefore the option a is correct

Your friend Lorenzo is trying to decide on a career path. He has narrowed down his search to two choices. Before he selects a major, he wants to know more about the two careers and the skills needed for each profession. What advice would you give Lorenzo

Answers

Answer:

Interview someone in each of your chosen fields.

Explanation:

In the context, my friend Lorenzo wants advice from me regarding career choices. He has somehow researched and narrowed down the choices to two  choices. Lorenzo wants to know more about the major and the skills required for each of the profession.

I would suggest him to interview someone experience person in this field and get insights from him. It will provide Lorenzo a better understanding of the major selection and it will also create a blueprints of the future paths.

How does marketing satisfy your needs as a college student? Are certain aspects of your life influenced more heavily by marketing than others? Provide examples

Answers

Yea dude’s iiiiiiiiiiiiiiiiiiiiiiii

Maria is 30 years old and has a nest egg of $25,000 that she worked hard to save
through her twenties. She would like to invest the money in order to have a down
payment for a home by the time she is 35.
How would you recommend Maria invest her money?

Answers

Answer:

Since Maria is 30 years old and has a nest egg of $ 25,000 that she worked hard to save through her twenties, and she would like to invest the money in order to have a down payment for a home by the time she is 35, I I would give her the following recommendation:

Given that the S&P 500 index fund has an average annual return of 10% to 15%, with positive returns almost guaranteed and considerably low risk, and that Maria has money that is not an excessively high amount and wants to allocate it For a purpose that implies the need for a certain investment security, I would recommend investing that sum in the aforementioned index fund.

In January, Dieker Company requisitions raw materials for production as follows: Job 1 $970, Job 2 $1,700, Job 3 $790, and general factory use $660. Prepare a summary journal entry to record raw materials used. (Credit account titles are automatically indented when amount is entered. Do not indent manually.)

Answers

Answer:

Dr Work in Process Inventory $3460

Cr Manufacturing Overhead $660

Cr Raw materials Inventory $2,800

Explanation:

Preparation of a summary journal entry to record raw materials used.

Based on the information given the summary journal entry to record raw materials used will be:

Dr Work in Process Inventory $3460

($970+$1700+$790)

Cr Manufacturing Overhead $660

Cr Raw materials Inventory $2,800

($3460-$660)

(To record raw materials used)

Notes Receivable differ from Accounts Receivable in that Notes Receivable: A. are generally considered a weaker legal claim B. do not have to be created for every new transaction, so they are used more frequently C. are noncurrent assets D. generally charge interest from the day they are signed to the day they are collected

Answers

Answer: D. generally charge interest from the day they are signed to the day they are collected

Explanation:

The notes receivable refers to the written promise that an amount of money will be received at a future date.

It should be noted that such money consist of the principal and the interest accrued. It is written under the current assets section in the balance sheet.

On the other hand, the accounts receivable refers to the payment that a company will receive from the customers who have bought its goods on credit.

While the nite receivable charges interest, the account receivable doesn't. Therefore, notes receivable differ from accounts receivable in that notes receivable generally charge interest from the day they are signed to the day they are collected.

If Company A has a lower debt ratio than Company B, then Company A is likely to have __________ than Company B.
a. a higher level of financial risk
b. a greater ability to borrow
c. more total assets
d. less financial flexibility

Answers

Answer:

b. a greater ability to borrow

A machine with a cost of $100,000 has an estimated residual value of $8,000 and an estimated life of 7 years or 21,000 hours. What is the amount of depreciation for the second full year, using the double-declining-balance method

Answers

Answer:

$20,408.16

Explanation:

Depreciation expense using the double declining method = Depreciation factor x cost of the asset

Depreciation factor = 2 x (1/useful life) = 2/7

1st year= 2/7 x 100,000 = 28,571.43

book value = 100,000 - 28,571.43 = 71,428.57

2nd year = 2/7 x 71,428.57 = $20,408.16

Fixed costs can be defined as costs thatGroup of answer choicesvary inversely with production.vary in proportion with production.are incurred only when production is large enough.are incurred even if nothing is produced.

Answers

Answer: are incurred even if nothing is produced.

Explanation:

Fixed costs are referred to as the cost that doesn't vary with the production level. Even if the company doesn't produce anything, the fixed cost will still be incurred.

The fixed cost is different from the variable cost which is the cost that varies along with production. Examples of fixed cost include salaries, rental lease payments, salaries, etc.

For February, sales revenue is $250,000; sales commissions are 6% of sales; the sales manager's salary is $50,000; advertising expenses are $15,000; shipping expenses total 1% of sales; and miscellaneous selling expenses are $1,000 plus 1/2 of 1% of sales. Total selling expenses for the month of February are:_______.
a. $65,000.
b. $69,750.
c. $82,250.
d. $84,750.

Answers

Answer:

d. $84,750.

Explanation:

Calculation to determine what Total selling expenses for the month of February are:

Sales commissions $15,000

($250,000 ×6%)

Sales manager's salary $50,000

Advertising expenses $15,000

Shipping expenses $2,500

($250,000 × 1%)

Miscellaneous selling expense $2,250

[$1,000 + ($250,000 × 0.5%)]

Total selling expenses $84,750

Therefore Total selling expenses for the month of February are:$84,750

Job analysis is important to HR managers because the information gathered in job analysis is used in so many HR activities/functions. Describe how job analysis information is used in four different HR activities/functions. Illustrate by specific examples in hospitality and tourism.

Answers

Answer:

Job analysis in tourism and hospitality include planning, making and providing, lodging recreation and travel related services.

Explanation:

Job analysis is a part of the procedure to identify the contents of the job interms of the acts involved and it provides information to the organization necessary to perform these activities. Procedure involves collecting of information. Being both task and work oriented.

The benefit the goverment receives from tax can be measured by

Answers

Answer:

the change in the equilibrium quantity of the good. the change in the equilibrium price of the good.

Explanation:

The benefit that government receives from a tax is measured by a. b. c. d. the change in the equilibrium quantity of the good. the change in the equilibrium price of the good.

The revenue or benefits received from tax by the government of a Country can be measured by using the Tax-to-GDP ratio.

The Tax-to-GDP ratio provides an in-depth knowledge of the revenues generated from tax by the nation as it relates to the economy.

This ratio helps to pinpoint the benefits from taxation with relation to the size of the nations economy. for instance, if their is higher revenue from tax, it means that the Country can spend more money healthcare, education or infrastructure.

Hence, the Tax-to-GDP ratio, measures the benefit from tax in a nation, and a higher tax revenue of a nations gross domestic product (GDP) signifies economic growth.

You can get more insight about taxes here https://brainly.com/question/15090055?referrer=searchResults

What are the macroeconomic conditions affecting the IT industry? Select "yes" for those statements that are accurate and choose "no" for those that are not.

a. From a political perspective, Ricoh should be aware of regulations from ITAC (Information Technology Association of Canada) who is actively promoting and supporting the expansion of the IT services industry in Canada as this move will likely impact Ricoh in many ways.
b. From an economic perspective, Canada enjoys a strong economy with a strong GDP growth.
c. Low oil prices are causing turmoil in business investment in western Canada, leading to a negative impact for the economic component of the macro-environment.
d. A weak Canadian dollar makes the cost of importing more expensive.

Answers

Answer:

a. From a political perspective, Ricoh should be aware of regulations from ITAC (Information Technology Association of Canada) who is actively promoting and supporting the expansion of the IT services industry in Canada as this move will likely impact Ricoh in many ways.   - Yes

b. From an economic perspective, Canada enjoys a strong economy with a strong GDP growth.  -  Yes

c. Low oil prices are causing turmoil in business investment in western Canada, leading to a negative impact for the economic component of the macro-environment.  -  Yes

d. A weak Canadian dollar makes the cost of importing more expensive. - No

Explanation:

The macroeconomic conditions that impact the business in terms of the economic growth rate. The use of GNP and GDP to measure the growth. The macroeconomic phenomenon estates the patterns and conditions from the large aspects of the economy.
Other Questions
please help!!!!!!!!!!! All of the following are characteristics of marble cake federalism EXCEPT Group of answer choices there is greater cooperation between the federal and state governments. the federal government becomes more intrusive in state affairs. there is a greater sharing of responsibilities between federal and state levels. the national government exercised its power independently from the state governments. there are mingled responsibilities and blurred distinctions between the levels of government. which one is the correct answer A doctor diagnoses a patient with depression. Which symptom most likely helped the doctor confirm this diagnosis?behaving recklessly on occasiondecreasing use of alcoholfeeling overwhelmed with intense guilt and angerweight gain over the past year Qu pas en Sevilla en el Quijote de La Mancha? A punch contains cranberry juice and ginger ale in the ratio 5:3. If you require 32 Lof punch for a party, how many litres of cranberry juice and how many litres of gingerale are required? does any one like Tom Mcdonld Which statement describes one way new immigrants influenced America in the late 19th century?a. Celebrations such as chinese new year became part of american culture b. American cities changed their names to incorporate ethnic terminology c. New immigrants became major property owners in america d. companies owned by immigrants became richer and more powerful PLS HELP A plot that functions separately from the primary plot is called a ____________.multiple plot linesubplotmain plotside plot Find the area of the sector. Round the answer to the nearest tenth. For the reaction 2A + 4B ----> 2C + 2D, at a particular instant in time, the rate of the reaction is 0.0352 M/s. What is the rate of change of B? Show Work!A. 0.0088 M/s B. -0.0088 M/s C. -0.141 M/s D. -0.0352 M/s E. 0.141 M/s Why would railroad customers like the Hepburn Act ? 10. Watermelons were a gift of the:ONativeAmericansOEuropeansoAfricansNone of theC answer this question Find the sample size necessary to estimate the mean arrival delay time for all American Airlines flights from Dallas to Sacramento to within 6 minutes with 95% confidence. Based on a previous study, arrival delay times have a standard deviation of 39.6 minutes. dgar quiere escribirle una carta a Cori para expresarle asertivamente lo que siente, piensa y desea. Si t estuvieras en el lugar de dgar, qu le diras a Cori? Complete this item.For the following figure, can you conclude that / | | m? Select true or false. A compound, C20H28O, produces a 1H NMR spectrum with 11 distinct signals. The steps made by the integral trace measure 52, 17, 17, 26, 17, 25, 26, 9, 9, 35, and 8 mm. Complete the following table.Integral # Products52 mm 17 mm 17 mm 26 mm 17 mm 25 mm 26 mm35 mm 8 mm meaning of Dentology An amino acid analyzer is an instrument used to determine a. the sequence of amino acids in a polypeptide chain b. the presence of modified amino acids in a protein c. the identity of N-terminal and C-terminal amino acids in a protein d. the identities and relative amounts of amino acids in a protein