Pt3 science......

Select correct answer ♡ !

Answer:

It would be B they bend to reflect light

Answer:

The correct answer is -

1. D. mold

2. A. Cast

3. F. trace fossil

4. C. original material fossils

5. B. fossil record.

Explanation:

Mold is the impression of an organism in a rock that occurs due to the complete dissolving of the organism and only an impression left in sedimentary rocks.

The cast is a fossil copy of an organism in a rock that takes place when water-containing minerals fill the molds and creates a three-dimension copy of the fossil.

Trace fossils are the fossils that are preserved in such a manner that records of biological activity stored only instead of remains of plants or animals.

Storing originals animals or parts of the remaining such as tissue of an organism in natural form is known as original-material fossils.

Fossil records are the fossils ever found or discovered on the earth.

Answer:

C

Explanation:

Common sense

Answer:

34.9 mL

Explanation:

First we convert 23.6 g of LiBr into moles, using its molar mass (86.845 g/mol):

Now we can calculate the required volume, using the definition of molarity:

We can convert L into mL:

Answer:

33/7

Multiply the denominator of the fraction by the whole number.

Add this result to the numerator of the fraction

answer becomes the numerator of the improper fraction.

Explanation:

Answer:

33/7

Explanation:

1. take the fraction and multiply the denominator by 4 to get 28

2. add the numerator to that... 28+5=32

Answer:

the guy above is wrong

Explanation:

i just did the test and got it wrong

Answer:

The volume will be 568.89 mL.

Explanation:

Boyle's law says that "The volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure"

Boyle's law is expressed mathematically as:

Pressure * Volume = constant

or P * V = k

Gay-Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. That is, the pressure of the gas is directly proportional to its temperature. Gay-Lussac's law can be expressed mathematically as follows:

[tex]\frac{P}{T}=k[/tex]

Where P = pressure, T = temperature, K = Constant

Finally, Charles's law indicates that as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases. In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:

[tex]\frac{V}{T}=k[/tex]

Combined law equation is the combination of three gas laws called Boyle's, Charlie's and Gay-Lusac's law:

[tex]\frac{P*V}{T} =k[/tex]

Studying an initial state 1 and a final state 2, it is fulfilled:

[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]

In this case:

Replacing:

[tex]\frac{960 mmHg*550 mL}{473K} =\frac{830 mmHg*V2}{423 K}[/tex]

Solving:

[tex]V2=\frac{423 K}{830 mmHg} *\frac{960 mmHg*550 mL}{473K}[/tex]

V2= 568.9 mL

The volume will be 568.89 mL.

Answer:  The FitnessGram PACER Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The test is used to measure a student's aerobic capacity as part of the FitnessGram assessment. Students run back and forth as many times as they can, each lap signaled by a beep sound.

Explanation:

The volume (in litres) of 2.75 g of fluorine gas at 35 °C and 4.55 atm is 0.402 L

Mole = mass / molar mass

Mole of F₂ = 2.75 / 38

Mole of F₂ = 0.0724 mole

Using the ideal gas equation, the volume of the gas can be obtained as follow:

PV = nRT

Divide both side by P

V = nRT / P

V = ( 0.0724 × 0.0821 × 308) / 4.55

V = 0.402 L

Learn more about ideal gas equation:

https://brainly.com/question/4147359

Answer:

0.08937835168818843

Explanation:

1 grams Oxygen is equal to 0.062502343837894 mole.

The balanced equation of the given reaction is as follows: 5SiO2 + 2CaC2 → 5Si + 2CaO + 4CO2.

A chemical equation is said to be balanced when the number of atoms of each element on both sides of the equation is the same.

According to this question, a chemical reaction between quartz and calcium chloride is given to produce silicon, calcium oxide and carbon dioxide.

The balanced equation that represents an equal number of atoms on both sides is as follows:

5SiO2 + 2CaC2 → 5Si + 2CaO + 4CO2

Learn more about balanced equation at: https://brainly.com/question/7181548

#SPJ1

Answer: The correct option is D (Powders have more surface area and will dissolve faster).

Explanation:

For a scientist to investigate whether a powered pill will dissolve faster than a solid pill is putting the rate of the reaction under study.

Rate has to do with what is achieved per unit time. One of the factors affecting rates of chemical reaction includes the SURFACE AREA.

Reagents in solution tend to react faster than reagents in solid form. This is because molecules are freer to move about and collide more effectively in solutions. For solids, the more the surface area exposed for reaction the faster the reaction. For example, a lump of Zinc will not react as fast as powdered zinc with dilute hydrochloric acid to produce hydrogen.

Therefore, with the above explanation and example concerning surface area in a chemical reaction, the hypothesis the scientist should develop is that powers which has more surface area will dissolve faster than the soils pills.

Answer:

The correct option is D (Powders have more surface area and will dissolve faster).

Explanation:

Answer:

Plants need to regulate the level of water in their bodies in order to be able to carry out several essential processes like photosynthesis and respiration as well as maintain cell turgidity, without which the plant will not survive in its given environment.

Explanation:

The ability of plants to regulate the amount of water in their bodies is known as water balance.

Plants need water in order to carry out many of their essential life functions such as photosynthesis, respiration, nutrition,etc. They also need water in order to order to maintain cell turgidity which serves to support the plant and keep them upright in order for them to absorb sunlight for photosynthesis. Water is also needed in cell division and growth in plants. Without water the plant would not survive, as it would not be able to carry out these essential life processes.

Water balance in plants is maintained through the process of transportation. Transpiration is the process by which water leaves the plant by evaporation through its leaves. When there is an excess of water absorbed by the plant through its root hairs, the rate of transpiration in plant increases. However, when there is little quantity of water available for the plant to use for its cellular processes, the rate of transportation reduces. The opening and closing of the stomata in the leaves of plants regulates the process of transportation.

Answer:

Explanation:

It is a 3s electron

Answer: C HNO3 and NaOh

Explanation:

D is the answer cause two h20 + o2(g)

Answer:

if 12 moles are produced then it came 24 moles of Al(OH)3

Explanation:

The number that is written in front of the molecule is called stoichiometry, represents the number of mole of that molecule. 12 moles of [tex]Al_{2}O__{3}[/tex] is produced by 24 mole of Aluminum.

Stoichiometry is a part of chemistry that help us in making relationship between reactant and product from quantitative aspects. It tells about how much part of reactant will be required to produce particular product. Unitary method is always applied in case of stoichiometry chemistry.

The balanced equation is

[tex]4Al+3O_{2}\rightarrow 2Al_{2}O__{3}[/tex]

The mole ratio between  [tex]Al_{2}O__{3}[/tex] and Al is 2:4, means to produce 4 moles of [tex]Al_{2}O__{3}[/tex] we need 2 moles of Aluminum

4 mole of [tex]Al_{2}O__{3}[/tex]= 2 moles of Aluminum

1 mole of [tex]Al_{2}O__{3}[/tex]=(1÷2) moles of Aluminum

12 moles of [tex]Al_{2}O__{3}[/tex]= 24 mole of Aluminum

Therefore 12 moles of [tex]Al_{2}O__{3}[/tex] is produced by 24 mole of Aluminum.

To learn more about stoichiometry, here:

https://brainly.com/question/28780091

#SPJ2

Answer:

the answer is d

Explanation:

hopes this helps

Stoichiometry is the field of chemistry that is concerned with the relative quantities of reactants and products in chemical reactions. For example, when oxygen and hydrogen react to produce water, one mole of oxygen reacts with two moles of hydrogen to produce two moles of water

Answer:

the relationship between the relative quantities of substances taking part in a reaction or forming a compound, typically a ratio of whole integers.

Explanation:

Dont put so much points pal,

Answer:

Certain breeds of fish will often clean bigger fish. The cleaner fish gets food, the bigger fish gets a cleaning.

I'm not too sure.

Good luck! <3

Answer:

anion

Explanation:

anion undergoes reduction.

cation undergoes oxidation.

The ions are categorized according to the process of oxidation and reduction. The ion usually undergoes reduction is an anion.

A process involving the partial or complete gain of electrons and loss of oxygen. The ions acquire a net negative charge on them.

Thus, anions usually undergo a reduction.

Learn more about Reduction.

https://brainly.com/question/14698511

#SPJ2

Answer:

pH = -log[H⁺] = -log(4.75 x 10⁻⁷) = -(- 6.32 ) = 6.32

Explanation:

Given 4.3 x 10⁻⁷M H₂CO₃ (Ka1 = 4.2 x 10⁻⁷ &  Ka2 = 4.8 x 10⁻¹¹)

Note: The Ka2 value for the 2nd ionization step is so small (Ka2 = 4.8 x 10⁻¹¹) It will be assumed all of the hydronium ions (H⁺) come from the 1st ionization step.  

1st Ionization step

                    H₂CO₃        ⇄   H⁺ + HCO₃⁻

C(initial)     4.3 x 10⁻⁷             0         0

ΔC                   -x                  +x        +x

C(final)      4.3 x 10⁻⁷ - x         x          x

Note: the 'x' value in this analysis can not be dropped as the Conc/Ka value is less than 10². In this case he C/Ka ratio* (4.3E-7/4.2E-7 ≈ 1)  is far below 10².

So, one sets up the equilibrium equation to be quadric and the x-value can be determined.

Ka1 = [H⁺][HSO⁻]/[H₂SO₃] = (x)(x)/(4.3 x 10⁻ - x) = x²/(4.3 x 10⁻⁷ - x) = 4.2 x 10⁻⁷

=>   x² = 4.2 x 10⁻⁷(4.3 x 10⁻⁷ - x)

=>   x² + 4.2 x 10⁻⁷x - 1.8 x 10⁻¹³ = 0              

      a = 1, b = 4.2 x 10⁻⁷, c = - 1.8 x 10⁻¹³

x = b² ± SqrRt(b² - 4(1)(-1.8 x 10⁻¹³ / 2(1) =  4.75 x 10⁻⁷

x = [H⁺] = 4.75 x 10⁻⁷

pH = -log[H⁺] = -log(4.75 x 10⁻⁷) = -(- 6.4 ) = 6.4

______________________

* The Concentration/Ka-value is the simplification test for quadratic equations used in Equilibrium studies. If the C/Ka > 100 then one can simplify the C(final) by dropping the 'x' if used in this type analysis. However, if the C/Ka value is < 100 then the x-value must be retained and the solution is determined using the quadratic equation formula.

for ax² + bx + c = 0

x = b² ± SqrRt(b² - 4ac) / 2a

Answer:

gold i believe or possibly bromine

Explanation:

q- how does fluorine react with gold

a- this fluoride compound features gold in its highest known oxidation state. this red solid dissolves in hydrogen fluoride, but these solutions decompose, liberating fluorine.

q- how does chlorine react with gold

a- gold does react with halogens. it'll, for example, react very slowly with chlorine gas at room temperature to form gold chloride, AuCl3. if gold chloride is heated gently, it will decompose to release the pure elements again.

q- how does bromine react with gold

a- gold in bromine solutions dissolves according to electrochemical/chemical (EC) mechanisms. ... in the chemical composition of the mechanism, this monovalent gold bromide disproportionate into gold and stable AuBr −4 , which reports into solution. with respect to pH, there are two characteristic dissolution regions.

** sorry that i can't provide a sure answer**

good luck :)

i hope this helps

have a nice day!

Fluorine will be most reactive with gold.

What is fluorine?

Of almost all of the elements, fluorine seems to be the most electronegative as well as reactive. Fluorine would be a diatomic, pale yellow, extremely corrosive, combustible gas with a strong smell. The lightest halogen would that be. It produces oxygen and even the incredibly corrosive hydrofluoric acid when it combines strongly with water.

Reactivity would be a substance's capacity to chemically combine with several other substances. Iron, for instance, reacts vigorously with oxygen.

As you move down the group, the halogens, which are non-metal elements in Group 7, become less reactive. In contrast to the alkali metals within Group 1 of the particular periodic table, this trend is the opposite. One of the most reactive elements in Group 7 was fluorine.

To know more about fluorine.

https://brainly.com/question/1940697

#SPJ3

Answer:

Pancreas.

Explanation:

Living systems are self-organized life forms and are known to be very much interactive with their surroundings or environment. Also, living systems are dependent on the flow of information, matter and energy at various levels.

Some examples of living systems in organisms are respiratory system, nervous system, digestive system, and circulatory system.

Additionally, living systems comprises of the following components; cells, organs, muscle, tissues, blood, etc.

An endocrine system refers to a series of ductless glands and organs responsible for the production and secretion of hormones that are used by the body for the performance of various functions such as metabolism, controlling growth, reproduction, mood, sleep, etc. These hormones are secreted directly into the circulatory system (blood) and then transported to the organs and tissues in the body.

Pancreas is one of the glands of the endocrine and digestive systems that produces insulin to help control the body's sugar levels and enzymes which aid in digestion.

The answer is true, yw.

Coniferous forests grow in a wide range of climates, from the coldest polar regions to the warmest tropical regions and everything in between. This statement is true.

Conifers are  a type of gymnosperm plants bearing cone like structures in which the seeds are located. Don't be fooled by the fact that coniferous woods are widespread around the world. Some of the wildest trees in the world can be found there.

Hyperion, a coastal redwood tree, is the tallest tree in the world, reaching a height of 379 feet, equivalent to a 35-story structure. From Siberia to Canada, coniferous rainforest biomes can be found. They have cold winters and warm to hot summers.

Temperatures in coniferous forests are quite low all year long. Summertime temperatures range from -7°C to 21°C, while the average wintertime temperature ranges from -54°C to -1°C. Hence, the statement is true.

Find more on conifers:

https://brainly.com/question/30415885

#SPJ6

0.00003 in scientific notation would be 3 × 10⁻⁵.

The scientific notation of a number is represented as a coefficient multiplied by 10 raised to an appropriate exponent.  0.00003 can be expressed in scientific notation as [tex]3\times 10 ^{-5}[/tex].

Scientific notation is a simple and standardised approach to express extremely big or extremely small numbers. Its foundation is the idea that a number can be expressed as a coefficient times a power of 10. The exponent indicates how many places the decimal point must be moved to get the original value, while the coefficient is normally an integer between 1 and 10 (inclusive of 1 but exclusive of 10). To write 0.00003 in scientific notation, we need to move the decimal point five places to the right to make the coefficient between 1 and 10. 0.00003 can be expressed in scientific notation as [tex]3\times 10 ^{-5}[/tex].

To know more about scientific notation, here:

https://brainly.com/question/19625319

#SPJ6