Answer: yes
Explanation: cut open their head and spray their head with windex. THAT SIMPLE
Which of the following is not a clue that a chemical reaction has taken place? *
4 points
A solid is formed when two clear solutions are mixed.
A clear solution is added to a red solution, and the result is a blue solution.
A solid is added to water and bubbles form.
A pure solid is heated and turns into a pure liquid.
Answer:
A pure solid is heated and turns into a pure liquid.
Explanation:
No colour change recorded, only change of state, hence this is a physical change - physical changes I.e. change of state and temperature are not chemical reactions.
A hot metal plate at 150°C has been placed in air at room temperature. Which event would most likely take place over
the next few minutes?
O Molecules in both the metal and the surrounding air will start moving at lower speeds.
O Molecules in both the metal and the surrounding air will start moving at higher speeds.
O The air molecules that are surrounding the metal will slow down, and the molecules in the metal will speed up.
O The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down.
Answer:
It would be the third answer.
Explanation:
This is because over the next few minutes, the heat would radiate away from the atoms in the metal plate and the atoms around the plate would absorb this radiation.
What Group would this element be in?
Answer:
Non-metals because it has 9 electrons meaning it is fluorine
Explanation:
What is the difference between moles and mass?
Which element has a mass number of 32?
a. argon ion
b. silicon ion
C. silicon
d. sulfur
Consider the compound Al(OH)3. What type of solid does it form?
Answer: crystal lattice
Explanation:
Answer:
A and the next question is c
Explanation:
Edge 2020
Compared to ionic compounds, molecular compounds generally have
A. good conductivity.
B. greater densities.
C. more chemical bonds.
D. a low boiling point.
Compared to ionic compounds, molecular compounds generally have a low boiling point and the correct option is option D.
What are Molecular compounds?
Molecular compounds are held together by covalent bonds. They are also called covalent compounds.
Covalent bonds are responsible for many of the properties of covalent compounds. Covalent compounds have relatively low boiling points, cannot conduct electricity, and may not dissolve in water.
Unlike ionic compounds, covalent compounds do not have freely moving electrons, so they cannot conduct electricity.
The individual molecules of covalent compounds are more easily separated than the ions in a crystal, so most covalent compounds have relatively low boiling points.
Therefore, compared to ionic compounds, molecular compounds generally have a low boiling point and the correct option is option D.
Learn more about Molecular compounds, here:
https://brainly.com/question/23088724
#SPJ3
Does anyone know how to determine if a reaction is a redox or not?
2Ca+O2→2CaO2 is the reaction. I've already made it a balanced equation, I just need to determine if its a redox or not.
Thank you!
The reaction is included in a redox reaction
Further explanation:
Given
Reaction
2 Ca + O₂ → 2 CaO
Required
a redox reaction
Solution
Redox reactions are reactions where there is a change in oxidation number
Oxidation is an increase/increase in oxidation number, while reduction is a decrease/decrease in oxidation number.
Reducing agents are substances that experience oxidation and oxidizing agent are substances that experience reduction
in the above reaction is included in a redox reaction because there is a change in oxidation number
Ca⇒Ca²⁺+ 2e⁻(for balanced equation : 2Ca⇒2Ca²⁺+4e⁻)
Oxidation ( 0 to +2)
O₂+2e⁻⇒O²⁻(for balanced equation : O₂+4e⁻⇒2O²⁻)
Reduction (0 to -2)
1. The heat absorbed when ice melts can
be measured in a unit called a
(1) torr
(2) degree
(3) mole
(4) joule
Answer:
joule
Explanation:
How much energy is required to boil 65 grams of 100°C water
And then heat the steam to 150°C?
Answer:
13598 J
Explanation:
Q = m × c × ∆T
Where;
Q = amount of energy (J)
m = mass (grams)
c = specific heat capacity
∆T = change in temperature
m = 65g, specific heat capacity of water = 4.184J/g°C, initial temperature= 100°C, final temperature = 150°C
Q = 65 × 4.184 × (150 - 100)
Q = 271.96 × 50
Q = 13598 J
Hence, 13598 J of energy is required to boil 65 grams of 100°C water and then heat the steam to 150°C.
Think about how particles are arranged inside atoms. Please name and describe those three particles, and describe how the particles are arranged inside atoms. Some topics to include are: the charge of the particles, the mass of the particles, and where the particles are located.
12) Which model of the atom is thought to be true?
a. Protons, electrons, and neutrons are evenly distributed throughout the volume of
the atom.
b. The nucleus is made of protons, electrons, and neutrons.
c. Electrons are distributed around the nucleus and occupy almost all the volume of
the atom.
d. The nucleus is made of electrons and protons.
Answer:
B
Explanation:
The neucles is surrounded by electrons. Electrons occupy most of the volume of the atom.
Atomic Model:
Atoms are the smallest unit of elements, which form bonds with others. In an atom, electrons revolve around the nucleus.
The nucleus is composed of positively charged protons and neutrons. The nucleus occupies a very small part of the atom.
Electrons are negatively charged particles, they are found around the nucleus and occupy most of the part of the atom.
Therefore, The neucles is surrounded by electrons. Electrons occupy most of the volume of the atom.
To know more about Atomic Model:
https://brainly.com/question/1596638
(02.03 LC)
What term is used to describe the lowest energy level of a particle? (5 points)
Explanation:
Answer and Explanation: Photon is the basic unit of light. The excited state refers to the state when any specified electron gained some energy from surrounding. In the ground state, the electron carries no energy and this refers to its lowest energy level.
Which element in Period 3 has the largest atomic radius?
Answer:
sodium
Explanation:
Question 20 (1 point)
The chemical formula for glucose, a simple sugar, is CH1206. The formula for ethanol is CzH60. What
accounts for the differences in these compounds?
Answer:
A. The ratio of the element in glucose is different than in ethanol
Explanation:
The compounds given are;
Glucose C₆H₁₂O₆
Ethanol C₂H₆O
The two compounds given are different from one another. But they have the same elemental composition.
Ethanol is made up of Carbon, hydrogen and Oxygen and so also, Glucose
Now,
The number of atoms in both compounds are different;
Number of atoms
C H O
Glucose 6 12 6
Ethanol 2 6 1
How can magnetic force be exerted on objects?
1)Over a distance and anytime an object is in a magnet's field of influence.
2)Only through objects.
3)Only by touching an object.
True or false
Equal forces acting on one object in opposite directions are called balanced forces
Answer:
True
Explanation:
Forces, equal in magnitude and opposite in direction, and cancel each other out are called Balanced Forces.
Balanced Forces DO NOT cause any change in the velocity of the object, but the Object may correspond to a change in shape or size.
Example :
Blasting a balloon by compressing it tightly with both hands, roughly with an equal force, is a practical example of Balanced Forces. In this case, the balloon before the burst stays at a state of rest and same after the burst. But the burst or the compression, causes a change in the shape of the balloon.
What separates the inner planets from the outer planets in our solar system?
()Comet Belt
()Asteroid Belt
()Their differences
()Distance
Help plss!!
Answer:
the answer is B Astroid Belt
Potasyum-40 küçük atom numaralı doğal radyoaktif birkaç element izotopundan biridir ve doğada K izotopları içerisindeki bolluk yüzdesi %0,012'dir. 1,65 mg K/mL içeren bir bardak sütü içtiğiniz zaman kaç tane 40K atomu yutmuş olursunuz? (1 Bardak süt 225 mL, K: 39,10 g/mol)
Answer:
6.707 × 10¹⁷
Explanation:
From the information given:
40 ^ K kütlesi = sütteki K kütlesi × 40 ^ K / 100 kütle yüzdesi
nerede;
sütteki K kütlesi = 1.65 mg of K/mL × 225 mL = 371.25 mg of K
∴
40 ^ K kütlesi = 371.25 × 0.012/100
40 ^ K kütlesi = 0,04455 mg = 4.455 × 10⁻⁵ grams
40 ^ K mol sayısı = 40 ^ K kütlesi / molar kütle
= 4.455 × 10⁻⁵/40
= 1.11375 × 10⁻⁶
Son olarak, 40 ^ K = mol × Avogadro sayısı atomları
= 1.11375 × 10⁻⁶ × 6.022 × 10^23
= 6.707 × 10¹⁷
Is iron rusting a chemical reaction? Explain why or why not.
Answer: Yes- Rusting is an oxidation reaction. The iron reacts with water and oxygen to form hydrated iron(III) oxide, which we see as rust. Iron and steel rust when they come into contact with water and oxygen – both are needed for rusting to occur. Rusting is an example of a chemical change. A chemical property describes the ability of a substance to undergo a specific chemical change. A chemical property of iron is that it is capable of combining with oxygen to form iron oxide, the chemical name of rust.
Hope this helps.... Stay safe and have a Merry Christmas!!!!!!!!!!!! :D
6) Define Hydrogen bonds
A. A force created by differences in electronegativity and the small size of the hydrogen atom
make them especially strong.
B. A force created by similarities in electronegativity and the small size of the hydrogen atom
make them especially strong,
C. Forces created by temporary dipoles that result from the movement of electrons in non-
polar molecules.
D. A force created by differences in electronegativity and the large size of the hydrogen atom
make them especially strong,
E. The force between polar molecules when the opposite partial charges of a molecule exert a
force on each other
Answer:
A hydrogen bond is an intermolecular force (IMF) that forms a special type of dipole-dipole attraction when a hydrogen atom bonded to a strongly electronegative atom exists in the vicinity of another electronegative atom with a lone pair of electrons. Intermolecular forces (IMFs) occur between molecules. Other examples include ordinary dipole-dipole interactions and dispersion forces. Hydrogen bonds are are generally stronger than ordinary dipole-dipole and dispersion forces, but weaker than true covalent and ionic bonds.
Explanation:
20 POINTS!!
Kinetic and Potential Energy
Answer:
When a ball is rolled up a hill, it has potential energy that can turned into kinetic energy. The kinetic energy would be the ball rolling down the hill.
Explanation:
Hope this helps!
In what way is Model A better than Model B? Model A shows the types of elements in the compound, but Model B does not. Model A shows the total number of atoms in the molecule, but Model B does not. Model A shows the three-dimensional shape of the molecule, but Model B does not. Model A shows the number of atoms of each element in the molecule, but Model B does no
Answer:the answer is c babes
Explanation:
I hope I could help y’all
Have a nice day
Or whatever day u want LMA0 it’s not up to me. Ight peace loves
Model A is better than Model B as Model A shows the three-dimensional shape of the molecule, but Model B does not. The correct option is c.
What are molecules?The smallest particle of a substance possesses all of its physical and chemical properties. One or more atoms make up a molecule.
Knowing the molecular weights of the molecules allows us to calculate their sizes. The molecular weight of a molecule is the sum of the atomic weights of the atoms in the molecule.
The relative atomic mass of particles determines their size. Particles with a higher relative atomic mass weigh more than particles with a lower relative atomic mass. Larger atoms have heavier iotas and a larger relative atomic mass.
Therefore, the correct option is c, Model A shows the three-dimensional shape of the molecule, but Model B does not.
To learn more about molecules, refer to the link:
https://brainly.com/question/28931982
#SPJ2
What is the redox reaction? And how does the redox reaction happen inside batteries?
Answer:
It is called a reduction-oxidation, oxide-reduction reaction, or simply as a redox reaction, any chemical reaction in which one or more electrons are transferred between the reactants
Redox battery is an example of both a Flow Battery and a two electrolyte system.In this case, it depends on two different active aqueous electrolytes of vanadium dissolved in sulfuric acid separated by a membrane at which ionic interchange takes place.
Thats my opinión though.
Wax melts when it is heated. Which most likely describes what is true of the result of this reaction?
The bonding of the atoms is not the same before and after the change.
The wax has the same density before and after the change.
The same amount of wax exists before and after the change.
The wax cannot be changed back into a solid.
quickly help!!!
Answer:
The same amount of wax exists before and after the change.
Explanation:
Answer:
c -the same amount of wax exists before and after the change-
Explanation:
I did the quiz (edg.) :)
Some notes for you:
A physical change is a change in some of the physical properties of matter, but not in its identity.Wax melting is an energy change, and the energy change can be reversed, which means the wax cools into hard wax again. The wax didn't leave, nor did it somehow get less of it. It stays the same! :)I hope you have an amazing day, I mean it. God bless you!
john 7:37 <3
Show your work with good use of units, rounding, and significant figures. [Hint: it is good practice to show the value of your answer before you round off to the final answer with the correct significant figures!]
(8 points) How much heat is required to convert 10.00 g of ice at –20.00°C to water at 25°C. The specific heat of ice is 2.09J/g°C; the specific heat of water is 4.182 J/g°C; the heat of fusion is 333.0 J/g.
Group of answer choices
Heat required : 4.8 kJ
Further explanationThe heat to change the phase can be formulated :
Q = mLf (melting/freezing)
Q = mLv (vaporization/condensation)
Lf=latent heat of fusion
Lv=latent heat of vaporization
The heat needed to raise the temperature
Q = m . c . Δt
1. heat to raise temperature from -20 °C to 0 °C
[tex]\tt Q=10\times 2.09\times (0-(-20)=418~J[/tex]
2. phase change(ice to water)
[tex]\tt Q=10\times 333=3330~J[/tex]
3. heat to raise temperature from 0 °C to 25 °C
[tex]\tt Q=10\times 4.18\times (25-0)=1045~J[/tex]
[tex]\tt Q~tot=418+3330+1045=4793~J\rightarrow rounding~and~2~sig~figs=4.8~kJ[/tex]
You are making lemonade and the calls for 6 cups Lemon juice (L), 3 Cups of sugar (S) and 5 cups of water (W) to make 12 Cups of Lemonade (LA): your formula is:
6 L + 3 S + 5 W = 12 LA
You are given 9 cups of lemon juice (L), 8 cups of sugar (S) and unlimited water (W).
How many cups of lemonade can you make?
1. 9
2. 12
3. 18
4. 32
Answer:
18 Cups
Submitted the assignment
Explanation:
At 313° K, the volume of a gas is 50.0 ml. At constant pressure, what is the new volume of the
gas if the temperature is decreased to 293°K?
Answer:
46.80 ml
Explanation:
V1 =50ml
T1 =313K°
T2 = 293K°
V2 =?
V1/T1 =V2/T2
V2=V1*T2/T1
V2=50*293/313
46.80ml
How many grams are there in 2.34x10^23 atoms of Cu?
The mass of the 2.34 × 10²³ atoms of copper is equal to 24.68 grams.
What is Avogadro's number?The Avogadro constant can be defined as the proportionality factor that the number of constituent particles in a sample with the amount of substance.
Avogadro’s number can be described as a dimensionless number that represents the number of entities in one mole of any substance. These elementary entities can be molecules, atoms, ions, electrons, or protons, etc.
Avogadro’s constant has a value approximately equal to 6.022 × 10²³ mol⁻¹.
Given, the number of atoms of copper = 2.34 × 10²³
The atomic mass of Cu Copper = 63.5 g/mol
So 6.022 × 10²³ atoms of Cu have mass = 63.5 g
Then 2.34 × 10²³ Cu atoms will have mass = [tex]\frac{63.5 \times 2.34 \times 10^{23}}{6.02 \times 10^{23}}[/tex] = 24.68 g
Therefore, 24.68 grams of Cu are there in 2.34 × 10²³ atoms of Cu.
Learn more about Avogadro's number, here:
brainly.com/question/11907018
#SPJ2
how many atoms are there in 8.08 moles of carbon dioxide
Answer:
145.97×10²³ atoms
Explanation:
Given data:
Number of moles of CO₂ = 8.08 mol
Number of atoms of CO₂ = ?
Solution:
1 mole of CO₂ contain 1 mole C atom.
8.08 mole contain 8.08× 1 = 8.08 mole of C atom.
1 mole of CO₂ contain 2 moles of O atom.
8.08mole contain 8.08×2 = 16.16 mole of O atom.
Total number of moles of atoms = 8.08 mole + 16.16 mole
Total number of moles of atoms = 24.24 mol
Number of atoms of CO₂:
1 mole of any substance contain 6.022×10²³ atoms.
24.24 mol ×6.022×10²³ atoms / 1 mol
145.97×10²³ atoms
