Question 4: Mac and Tosh stand 8 meters apart and demonstrate the motion of a
transverse wave on a string. The wave can be described as having a vertical
distance of 32 cm from a trough to a crest, a frequency of 2.4 Hz, and a
horizontal distance of 48 cm from a crest to the nearest trough. Determine the
amplitude, wavelength, and speed of such a wave. Show all of your work and
explain your steps for solving the problem

Answers

Answer 1

Answer:

Explanation:

Refer to the pic below that I attached as we talk through these answers.

The amplitude is shown as the height from the top of one wave (called the crest) to the midline. If the whole vertical height from crest to trough is 32 cm, then the amplitude is half of that at

A = 16 cm

The wavelength, or λ, is the horizontal distance from crest to crest or trough to trough. Therefore, our wavelength is 48 cm + 48 cm which is

λ = 96 cm

The speed of the wave is the same thing as the velocity of the wave which can be found in the equation

[tex]f=\frac{v}{\lambda}[/tex] where f is the frequency of the wave and lambda is the wavelength. Filling in:

[tex]2.4=\frac{v}{96}[/tex] and

2.4(96) = v so

v = 230 m/s to the correct number of sig fig's

Question 4: Mac And Tosh Stand 8 Meters Apart And Demonstrate The Motion Of Atransverse Wave On A String.

Related Questions

pleaseeee helppppppp​

Answers

Answer:

the vertical acceleration is 9.8 m/s,

downward and no horizontal acceleration..

Answer:

9.8 m/s2

Explanation:

that's the correct answer

How is an ammeter connected in a circuit to measure current flowing through it?

Answers

Answer:

It is connected in series with the circuit

Explanation:

This is because to measure the current in the circuit, the current in the circuit has to flow through the ammeter. As such, the ammeter must be connected in series with the circuit so as to measure the current flowing through the circuit.

So, to measure the current flowing through a circuit with an ammeter, the ammeter must be connected in series with the circuit.

A certain capacitor, in series with a resistor, is being charged. At the end of 25 ms its charge is half the final value. The time constant for the process is about:

Answers

Answer:

  τ = 36 10⁻³ s

Explanation:

The charge of a circuit Rc is given by the expression

          q = q₀ (1 - [tex]e^{-t/ \tau }[/tex])

          q / q₀ = 1 - e^{-t/  \tau }

in this exercise they indicate that

          q / q₀ = ½

for a time t = 25 10⁻³ s

we substitute

          ½ = 1 - [tex]e^{- 25 \ 10^{-3} / \tau}[/tex]

          e^{- 25 \ 10^{-3} /  \tau} =  1 -½

         - 25 10⁻³ /τ = ln 0.5

         -25 10⁻³ / ln 0.5 = τ

         τ = 36 10⁻³ s

The table describes the properties of four compounds.



Which compounds are most likely ionic?

compounds A and B
compounds B and C
compounds C and D
compounds D and A

Answers

Answer:

Last option

Explanation:

match the given circuit parts to their appropriate functions. write only the letter of the correct answer on your paper

1.source a.an appliance/device that uses electricity
2.switch source like bulbs,computers.
3.wire b.it is a safety device made from materials
4.load that easily melt even before the wires
5.fuse carry too much current.
c.it is where electricity came from like
batteries and generators.
d.it is the pathway of electricity from the
resources to the load .
e.it controls the flow of electricity from the
source. it is used to turn on/off a load.

Answers

Answer:

a. Load.

b. Fuse.

c. Source.

d. Wire.

e. Switch.

Explanation:

An electric circuit can be defined as an interconnection of electrical components which creates a path for the flow of electric charge (electrons) due to a driving voltage.

Generally, an electric circuit consists of electrical components such as resistors, capacitors, battery, transistors, switches, inductors, fuse, etc.

Matching the given circuit parts to their appropriate functions, we have;

a. Load: an appliance or device that uses electricity source like bulbs, computers, television, radio, etc.

b. Fuse: it is a safety device made from materials that easily melt even before the wires carry too much current.

c. Source: it is where electricity came from like batteries and generators.

d. Wire: it is the pathway of electricity from the resources (source) to the load.

e. Switch: it controls the flow of electricity from the source. It is typically used to turn ON or turn OFF a load.

A sphere of diameter 3.0cm is mounted into a thin uniform wire of diameter 0.2mm calculate the length of the wire in meters​

Answers

Answer:

Length of the wire in meters​ = 0.000628 meter (Approx.)

Explanation:

Given:

Diameter of wire = 0.2 mm

Find:

Length of the wire in meters​

Computation:

Radius of wire = 0.2 / 2

Radius of wire = 0.1

Length of the wire = Circumference of circle

Circumference of circle = 2πr

Length of the wire = 2πr

Length of the wire = 2(3.14)(0.1)

Length of the wire = 0.628 mm (Approx.)

1 meter = 1,000 mm

So,

Length of the wire in meters​ = 0.000628 meter (Approx.)

I need help with number so can any one help me please and thanks

Answers

Answer:

Experiment plays many roles in science. One of its important roles is to test theories and to provide the basis for scientific knowledge. ... Experiment can provide hints toward the structure or mathematical form of a theory and it can provide evidence for the existence of the entities involved in our theories.

What is intertia? Explain.​

Answers

Answer:

property of matter by which it continues in its existing state of rest or uniform motion in a straight line, unless that state is changed by an external force.

Answer:

Law of inertia, also called Newton's first law, postulate in physics that, if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force.

Hope this answer is right!

Snell's Law: Light traveling through water comes to a glass surface at an angle of incidence of
48.5 degrees. If the angle of refraction is 38.5 degrees, what is the index of refraction of the
glass?

Answers

Answer:

1. The best definition of refraction is ____.

a. passing through a boundary

b. bouncing off a boundary

c. changing speed at a boundary

d. changing direction when crossing a boundary

 

Answer: D

Bouncing off a boundary (choice b) is reflection. Refraction involves passing through a boundary (choice a) and changing speed (choice c); however, a light ray can exhibit both of these behaviors without undergoing refraction (for instance, if it approaches the boundary along the normal). Refraction of light must involve a change in direction; the path must be altered at the boundary.

A skier of weight 700 N is pointed down a ski hill that has a slope angle of 25° above horizontal.
What is the component of his weight pulling him down the slope.
O 634N
O 326N
O 296N
O 700N

Answers

Answer:

O 296N

Explanation:

F_y = F*sin(x)

F_y = 700N*sin(25°)

F_y = 295.83N or 296N

(b) During one day, 250 kg of water is pumped through
the solar panel. The température of this
water rises from 16°C to 38°C.
The water absorbs 25% of the energy incident on the solar panel. The
specific heat capacity
of water is 4200J/(kg °C).
Calculate the energy incident on the solar panel during that day.
Please explain how to find the incident energy

Answers

Answer: The energy incident on the solar panel during that day is [tex]9.24 \times 10^{7} J[/tex].

Explanation:

Given: Mass = 250 kg

Initial temperature = [tex]16^{o}C[/tex]

Final temperature = [tex]38^{o}C[/tex]

Specific heat capacity = 4200 [tex]J/kg^{o}C[/tex]

Formula used to calculate the energy is as follows.

[tex]q = m \times C \times (T_{2} - T_{1})[/tex]

where,

q = heat energy

m = mass of substance

C = specific heat capacity

[tex]T_{1}[/tex] = initial temperature

[tex]T_{2}[/tex] = final temperature

Substitute the values into above formula as follows.

[tex]q = 250 kg \times 4200 J/kg^{o}C \times (38 - 16)^{o}C\\= 250 kg \times 4200 J/kg^{o}C \times 22^{o}C[/tex]

As it is given that water absorbs 25% of the energy incident on the solar panel. Hence, energy incident on the solar panel can be calculated as follows.

[tex]\frac{25}{100} \times q = 250 kg \times 4200 J/kg^{o}C \times 22^{o}C\\q = 9.24 \times 10^{7} J[/tex]

Thus, we can conclude that the energy incident on the solar panel during that day is [tex]9.24 \times 10^{7} J[/tex].

An athlete running the velocity 3m/s due east is confronted with two trade winds. One wind travelling at 10m/s in a direction north 65degrees east and another wind travelling at 8m/s in a direction south 70degrees east. Find the resultant velocity and direction of the athlete

Answers

Answer:

v = 10.09 m / s,   8.78 North of East

Explanation:

The easiest way to solve this exercise is to decompose the velocities into a coordinate system, where the x-axis coincides with the West-East direction and the y-axis coincides with the South-North direction.

athlete's velocity v₁ₓ = 3 m / s

wind speed 2 v₂ = 10 m / s with direction 65 north of east

          sin 65 = v_{2y} / v₂

          cos 65 = v₂ₓ / v₂

          v_{2y} = v₂ sin 65

          v₂ₓ = v₂ cos 65

          v_{2y} = 10 sin 65 = 9.06 m / s

          v₂ₓ = 10 cos 65 = 4.23 m / s

wind speed 3 v₃ = 8 m / s with direction 70 south of east

This angle measured from the positive side of the x-axis is

          θ = 360 - 70

          θ = 290

          sin 290 = v_{3y} / v₃

          cos 290 = v₃ₓ / v₃

          v_{3y} = v₃ sin 290

          v₃ₓ = v₃ cos 290

           v_{3y} = 8 sin 290 = -7.52 m / s

          v₃ₓ = 8 cos 290 = 2.74 m / s

now we can find each component of the velocity

         

X axis

        vₓ = v₁ + v₂ₓ + v₃ₓ

        vₓ = 3 + 4.23 + 2.74

        vₓ = 9.97 m / s

Y axis  

        v_y = v_{2y} + v_{3y}

        v_y = 9.06 - 7.52

         v_y = 1.54 m / s

to find the modulus let's use the Pythagorean theorem

         v = [tex]\sqrt{v_x^2 + v_y^2 }[/tex]

         v = [tex]\sqrt{9.97^2 + 1.54^2}[/tex]

         v = 10.09 m / s

let's use trigonometry for the direction

         tan θ = v_y / vₓ

        θ = tan⁻¹ v_y / vₓ

        θ = tan-1 1.54 / 9/97

         θ = 8.78

           

the address is 8.78 North of East

A gas in a sealed container has a pressure of 50 kPa at 27°C. What will the pressure of the gas be if the temperature rises to 87°C?

Answers

Answer:

the final pressure of the gas is 60 kPa.

Explanation:

Given;

initial pressure of the gas, P₁ = 50 kPa = 50,000 Pa

initial temperature of the gas, T₁ = 27⁰ C = 27 + 273 = 300 k

final temperature of the gas, T₂ = 87⁰ C = 87 + 273 = 360 K

Let the final pressure of the gas = P₂

Apply pressure law;

[tex]\frac{P_1}{T_1} = \frac{P_2}{T_2} \\\\P_2 = \frac{P_1T_2}{T_1} = \frac{50,000 \times 360}{300} = 60,000 \ Pa = 60 \ kPa[/tex]

Therefore, the final pressure of the gas is 60 kPa.

There is a bell at the top of a tower that is 45m high. The bell weighs 190N. The bell has ___________________ energy. Calculate it.




I NEED THE ANSWER PLEASE

Answers

Answer:

250mn

Explanation:

the volume of vessel is 6 litres. convert it into ml​

Answers

6000 ml
There are 1000ml in one liter

A coil is wrapped with 332 turns of wire on the perimeter of a circular frame (of radius 30 cm). Each turn has the same area, equal to that of the frame. A uniform magnetic field is directed perpendicular to the plane of the coil. This field changes at a constant rate from 29 mT to 56 mT in 63 ms. What is the magnitude of the induced average E in the coil, over the time interval 63 ms during which the field changes

Answers

Answer:

[tex]E=84.5V[/tex]

Explanation:

From the question we are told that:

Number of Turns [tex]N=332turns[/tex]

Radius [tex]r= 30cm[/tex]

Field Change [tex]B=56mt-29mt=27mt[/tex]

Time [tex]t=63ms[/tex]

Generally the equation for Magnetic Field is mathematically given by

 [tex]\frac{dB}{dt}=\frac{27*10^{-3}}{29*10^{-3}}[/tex]

 [tex]\frac{dB}{dt}=0.9T/s[/tex]

Generally the Flux at 332 turns is  mathematically given by

 [tex]\phi=N*A*B[/tex]

Generally the equation for Area of coil is mathematically given by

 [tex]A=\pi*r^2[/tex]

 [tex]A=\pi*(r*10^{-2})^2[/tex]

Since

 [tex]\phi=332*\pi*(\theta*10^{-2})^2*B[/tex]

Therefore

 [tex]\frac{d \phi}{dt}=332*\pi*(900*10^{-4}*\frac{dB}{dt}[/tex]

Generally the equation for emf Magnitude is mathematically given by

 [tex]E=\frac{d\phi}{dt}[/tex]

 [tex]E=332*\pi*(900*10^{-4}*0.9[/tex]

 [tex]E=84.5V[/tex]

how does a battery work ?​

Answers

A battery is a device that stores chemical energy and converts it to electrical energy. ... The flow of electrons provides an electric current that can be used to do work. To balance the flow of electrons, charged ions also flow through an electrolyte solution that is in contact with both electrodes.

Answer:

I completely agree with the first person's response.

Explanation:

They deserve Brainliest. Have a great summer.

What are the chemicals that react with one another in a chemical reaction?

Answers

Answer:

reactants react with eachother

Explanation:

yep

uses of semiconductor​

Answers

Answer:

Many digital consumer products in everyday life such as mobile phones / smartphones, digital cameras, televisions, washing machines, refrigerators and LED bulbs also use semiconductors.

Water can exist in three states: solid (ice), liquid and gas (steam).In which state, or states, is the motion of the molecules only vibrational?

Answers

Answer:

solid

Explanation:

Answer:

In the solid state, the motion of molecules is only vibrational, because solids are very tightly packed together and cannot move other than by vibrating

a bell rings at a frequency of 75hz on a warm 25 degree evening. calculate the...
a. speed of the sound wave at this temperature.
b. wavelength of the sound wave

Answers

Answer:

Explanation:

We need 2 different equations for this problem: first the velocity of sound equation, then the frequency of the sound equation.

The velocity of sound is found in:

v = 331.5 + .606T

We need to find that first in order to fill it into the frequency equation which is

[tex]f=\frac{v}{\lambda}[/tex] where v is the velocity we will find the part a, f is frequency and lambda is the wavelength. Starting with the velocity of the sound:

v = 331.5 + .606(25) and

v = 331.5 + 15 and rounding correctly using the rules for sig fig when adding:

v = 347 m/s

Filling that into the frequency equation:

[tex]75=\frac{347}{\lambda}[/tex] and

[tex]\lambda=\frac{347}{75}[/tex] so

[tex]\lambda=4.6m[/tex]

A jetliner can fly 8.0 hours on a full load of fuel. Without any wind it flies at a speed of 2.42 x 102 m/s. The plane is to make a round-trip by heading due west for a certain distance, turning around, and then heading due east for the return trip. During the entire flight, however, the plane encounters a 40.7-m/s wind from the jet stream, which blows from west to east. What is the maximum distance (in kilometers) that the plane can travel due west and just be able to return home

Answers

Answer:

3386.23 Km

Explanation:

Without any wind interference the speed of the plane, it flies at 2.42 x 102 m/s or 242 m/s

The magnitude of the velocity of the air = 40.7-m/s

The time taken, for the plane to fly due west, tw = distance, x ÷ (speed of the plane without wind interference, up - the magnitude of the velocity of the air, ua).......... (equation 1)

The time taken, for the plane to fly due east, te = distance, x ÷ (speed of the plane without wind interference, up + the magnitude of the velocity of the air, ua).......... (equation 2)

To calculate the total time, t, the plane can fly to cover east and west distances, we add equation 1 and 2 together

t = (x ÷ (up - ua)) + (x ÷ (up + ua))

Making distance x, the subject of the formula we have:

x = t ( up²- ua²) ÷ 2up

note t = 8.0 hours which is (8 x 60 x 60) seconds = 28,800‬

So, x = 28,800‬ ((242 m/s)² - (40.7-m/s)²)÷ 2(242 m/s)

x= 1,638,936,288‬ ÷ 484

= 3386.23 Km


[tex]what \: is \: matter \: \: \: {?} [/tex]

Answers

Answer:

matter is any substance that has mass and takes up space by having volume.

Explanation:

Matter is anything that has a mass and it takes up space or has a volume .

matters are made up many atoms or molecules .

hope it is helpful to you

stay safe, happy and healthy

difference between liquid solid and gas in the arrangement of molecules​

Answers

Answer:

Note that:

Particles in a:

gas are well separated with no regular arrangement.

liquid are close together with no regular arrangement.

solid are tightly packed, usually in a regular pattern.

Explanation:

The difference is in the movement in the molecules and their spatial arrangement.Molecules in gaseous states have the biggest freedom of movement, which means that they can move freely around. This is mainly due to the fact that intermolecular forces between the molecules are not as strong as in other states.


that’s the answer i got when i looked it up

Escriba la cantidad que representan los siguientes expresiones, dada en
notación cientifica.
a) 7.1 x 10
6) 2.3 x 103
C) 1.56 10
d) 4. 19. 4. 104

Answers

Answer:

Comencemos con la primera:

si tenemos algo como:

7.1*10^n

Simplemente lo que tenemos que hacer es:

si n es positivo, movemos n veces el punto para la derecha, si no tenemos dígitos, completamos con ceros.

si n es negativo, movemos n veces el punto a la izquierda.

a) 7.1*10

aca tenemos n = 1

entonces movemos una vez el punto a la derecha:

7.1*10 = 71. = 71

b) 2.3*10^3

aca n = 3, entonces movemos el punto 3 veces a la derecha:

2.3*10^3 = 23__.

Tenemos dos huecos ahí, los cuales serán completados con ceros, entonces:

2.3*10^3 = 2,300. = 2,300

c) 1.56*10

n = 1, entonces movemos el punto una vez a la derecha:

1.56*10 = 15.6

d) 4.10^4

acá tenemos n = 4

entonces movemos el punto 4 veces a la derecha, recordar que debemos completar con ceros:

4.10^4 = 40,000. = 40,000

As Courtney switches on the TV set to watch her favorite cartoon, the electron beam in the TV tube is steered across the screen by the field between two charged plates. If the electron experiences a force of 3.0 * 10^6 N, how large is the field between the deflection plates?

Answers

Answer:

Explanation:

Force= (q1q2)/(4/\Ęr2)

3×10^6= (1.602×10^-19)^2/(r^2)

r^2=(2.27×10^-33)/(3×10^6)

r^2=8.55×10^-45

r= 9.25×10^-23

Se tiene un péndulo cuyo frecuencia de oscilación es de 0.4 Hz. Cual sera la frecuencia de oscilacion de otro péndulo cuya longitud es el triple del anterior

Answers

Answer:

f = 0.365 Hz

Explanation:

The angular velocity of a simple pendulum is

           w = [tex]\sqrt{g/L}[/tex]

angular velocity and frequency are related

           w = 2π f

we substitute

           2π f = [tex]\sqrt{g/L}[/tex]

Let's find the initial length of the pendulum

            L = [tex]\frac{g}{4\pi^2 } \ f_o[/tex]

            L₀ = [tex]\frac{9.8}{4 \pi ^2} \ 0.4[/tex]

            L₀ = 0.6206 m

Indicates that the length of the chord triples

             L = 3 L₀

             L = 3 0.6206

             L = 1.8618 m

let's find the frequency

             f = [tex]\frac{1}{2\pi } \ \sqrt{\frac{9.8}{1.8618} }[/tex]

             f = 0.365 Hz

An airplane is .68 Kilometers long. How many Millimeters long is the plane?
a. 680 mm
b. 6,800 mm
c. 68,000 mm
d. 680,000 mm

Answers

Given : Airplane is 0.68 kilometers long

We know that :

  1 km = 1000 meters

⊕   1 m = 1000 millimeters

⇒   1 km = (1000 × 1000) millimeters

⇒   0.68 km = (0.68 × 1000 × 1000) millimeters

⇒   0.68 km = 680,000 millimeters

Answer: Airplane is 680,000 millimeters long

If an airplane is 0.68 Kilometers long, the length of the airplane in millimeters would be 680000 Millimeters, therefore the correct answer is option D.

What is a unit of measurement?

A unit of measurement is a specified magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind.

As given in the problem, If an airplane is 0.68 Kilometers long, then we have to find out the length of the airplane in millimeters,

1 kilometers = 1000 meters

1 meter = 100 centimeters

1 centimeters = 10 millieters

As given the length of the plane is 0.68 Kilometers.

0.68 kilometers = 680 meters

0.68 kilometers = 680×100 centimeters

0.68 kilometers = 680×100×10  millimeters

                           = 680,000 millimeters

Thus, the correct answer is option C.

To learn more about the unit of measurement from here, refer to the link;

brainly.com/question/12629581

#SPJ2

How couple is produced in bicycle? What causes the wheels of bicycle to rotate?

Answers

Answer:

A Couple in a bicycle is usually generated by the gravitational force and the corresponding reaction forces of the floor. A couple is a force which encourages or prevents a body turning in motion.

The wheels help in the movement and motion of the bicycle from point A to B. The chain which connects different parts help in the rotation of the bicycle wheels through the movement of the pedals by the legs

A cyclist is moving at a speed of 15 m/s. If the combined mass of the bike and person is 100 kg,
what is the momentum of the cyclist/bike?

Answers

Answer:

Explanation:

Momentum is equal to mass times velocity in kg and m/s, respectively. Therefore,

p = 100(15) so

p = 1500 [tex]\frac{kg*m}{s}[/tex]

Other Questions
how do icebergs form Can evolution happen to you PERSONALLY (in your lifetime)?A. Yes I evolved from a baby to a teenagerB. No it happens over a whole generation hi I need help on this The diameter of a copper wire is thought to be approximately 0.3mm. Which instrument should be used to obtain a more accurate measurement of the diameter of the wire? A measuring tape B metre rule C micrometer D ruler 2 A video game that usually costs $30.65 is marked down 60%. Kelvin determined that the new price of the game would be $18.39. Look at Kelvin's work and find his error. ($30.65)(0.60) = $18.39*Please give an explanation longer than 1 sentence :,) Irnic things? (Not the fire station one) Question 9 of 10What is one reason the colonists had difficulty coming together to revoltagainst Britain?A. Because they realized they could not live without British importsB. Because many still thought of themselves as British C. Because they could not make a decision on who should lead themD. Because most of them wanted approval from FranceSUBMIT please help me urgentthis is the first chapter The diagram shows the molecular structure of ethane. What is the chemicalformula for ethane?EthaneH HH-C-C-H| |H H [tex] please \: anyone \: help \:me \\ \\ go \: to \: my \: previous \: question \: [/tex] Figure ABCD is a kite. Find thevalue of x.BA 2x + 102xDx = [?]Enter please help me I will mark as a brainliest what do you see in this picture blow the stranger came early in February, one wintry day, through a biting wind and a driving snow, the last snowfall of the year, over the down, walking as it seemed from Bramble Hurst railway station, and carrying a little black portmanteau in his thickly gloved hand. Which adjective best describes the setting that the words in this sentence help to evoke? a) cozy b) dreamlike c) dull d) harsh (Explain why this is the answer) In the editorial by Andrew Potter, "The Newspaper is Dying-Hooray for Democracy", one of the author's central ideas is:A. Newspapers are necessary for a democracy to thrive.B. Newspapers are important because they bring together a diverse set of voices.C. The majority of people want to get their news from sources that do not have a particular point of view.D. The "daily me" is a threat to Democracy because it causes society to become polarized. whats the firsts presidents name? List 5 examples of positive peer pressure What is a figure of speech? a. words used in a nonsensical or humorous wayb. words used the wrong wayc. words used in a way that is not literally true d. words used in a more formal way than is usual Consider the following hypothesis test:H0: = 18Ha: 18A sample of 48 provided a sample mean = 17 and a sample standard deviation s = 4.5.If requires, round your answers to two decimal places.a. Compute the value of the test statistic (to three decimal places.)b. Use the t distribution table (Table 2 in Appendix B) to compute a range for the p-value.p-value is between ______and _______c. What is your conclusion? t = ______ What are chromosomes ? explain