Rank each of the following gases in order of increasing urms assuming equivalent amounts and all gases are at the same temperature and pressure where 1 has the lowest urms and 4 has the highest urms.

a. Gas 1 : H2S
b. Gas: He
c. Gas 3: NF3
d. Gas 4: H2O

Answer:

7.6×10¹⁰

Explanation:

7.296×10²÷9.6×10⁻⁹

To solve such problem,

We group the whole number ans solved seperately and also group the indices and solve the seperately

Step1 : 7.296/9.6 = 0.76

Step 2: applying the law of indices,

10²÷10⁻⁹ = 10⁽²⁺⁹⁾ = 10¹¹

Therefore,

7.296×10²÷9.6×10⁻⁹ = 0.76×10¹¹ = 7.6×10¹⁰

Solution :

a). The separation of 4-methylbenzoic acid from 1,4-dimethoxybenzene will work but it will result in lower recovery.

In the reaction of acid-base to form a sodium 4 - methoxy benzoate, that is soluble in the water, 4-methoxy benzoic acid reacts with the sodium bicarbonate to give sodium 4-methoxybenzoate as well as carbonic acid.

b). The pKa for the 4-methoxybenzoic acid is [tex]4.46[/tex], and that of carbonic acid is [tex]6.37[/tex]

c). The Keq for the reaction is [tex]10(6.37 - 4.46) = 101.91[/tex]

Therefore, the equilibrium lies to the right  and also the reaction favors the products and the separation works.

But the recovery will be low when compared to the extraction with Sodium hydroxide as the strong base will drive the equilibrium further to the right position, thus neutralizing all the acids virtually. And the weak base will partially neutralize the acid.

Answer: The product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.

Explanation:

When two or more chemical substances react together then it forms new substances and these new substances are called products.

For example, [tex]3N_{2}O_{5} + 3H_{2}O \rightarrow 6HNO_{3}[/tex]

This shows that nitric acid [tex](HNO_{3})[/tex] is the product formed and it is an acidic substance.

Hence, the solution at equilibrium will be acidic in nature.

Thus, we can conclude that the product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.

Answer: Moles of hydrogen required are 4.57 moles to make 146.6 grams of methane, [tex]CH_{4}[/tex].

Explanation:

Given: Mass of methane = 146.6 g

As moles is the mass of a substance divided by its molar mass. So, moles of methane (molar mass = 16.04 g/mol) are calculated as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{146.6 g}{16.04 g/mol}\\= 9.14 mol[/tex]

The given reaction equation is as follows.

[tex]C + 2H_{2} \rightarrow CH_{4}[/tex]

This shows that 2 moles of hydrogen gives 1 mole of methane. Hence, moles of hydrogen required to form 9.14 moles of methane is as follows.

[tex]Moles of H_{2} = \frac{9.14}{2}\\= 4.57 mol[/tex]

Thus, we can conclude that moles of hydrogen required are 4.57 moles to make 146.6 grams of methane, [tex]CH_{4}[/tex].

Answer:be careful and relax

Explanation:

Answer:

Hahaha be careful and relax

Answer:

14

73%

Explanation:

The mean Number of years worked :

. (sum of service years) / employees in the

(8+13+15+3+13+28+4+12+4+26+29+3+10+3+17+13+15+15+23+13+12+1+14+14+17+16+7+27+18+24) /

(417 / 30)

= 13.9 years

= 14 years

The percentage of employees who have worked for atleast 10 years :

Number of employees with service years ≥ 10 years = 22 employees

Total number of employees

Percentage (%) = (22 / 30= * 100% = 0.7333 * 100% = 73.33% = 73%

Answer:

the fraction of collisions with energy greater than Eact

Explanation:

The activation energy of a reaction stands as a sort of energy barrier between reactants and products. It is only reactants that possesses energy greater than the activation energy that can be converted from reactants to products.

When the temperature of the system is increased, more particles acquire energy greater than the activation energy. Hence, the fraction of collisions with energy greater than the activation energy increases so the rate of reaction increases likewise.

Answer:

The correct answer is "[tex]4.991\times 10^{-45} \ kg.m^2[/tex]".

Explanation:

According to the question,

[tex]R_{C-Cl} = 177 \ pm[/tex]

or,

         [tex]=1.77\times 10^{-10} \ m[/tex]

[tex]\alpha = 107^{\circ}[/tex]

[tex]m_{Cl}=34.97 \ m.u[/tex]

or,

      [tex]=34.97\times 1.66\times 10^{-27}[/tex]

      [tex]=5.807\times 10^{-26} \ kg[/tex]

The moment of inertia around the rotational axis will be:

⇒  [tex]I=3\times m_{Cl}\times (R_{C-Cl})^2 \ Sin^2 \alpha[/tex]

By putting the values, we get

       [tex]=3\times 5.807\times 10^{-26}\times (1.77\times 10^{-10})^2 \ Sin^2 (107)[/tex]

       [tex]=3\times 5.807\times 10^{-26}\times (1.77\times 10^{-10})^2\times 0.91452[/tex]

       [tex]=4.991\times 10^{-45} \ kg.m^2[/tex]

Answer:

2700 kg/m³

Explanation:

First let's convert 2.7 g/cm³ to kg/cm³, keeping in mind that 1 kilogram equals 1000 grams:

Finally we need to convert 0.0027 kg/cm³ to kg/m³, keeping in mind that 1 meter equals 100 centimeters, as follows:

The answer is 2700 kg/m³.

Answer: Sugar is added to water and initially completely dissolves, but eventually solid sugar collects on the bottom of the container. Sugar and water are both partially miscible. This produces a dynamic equilibrium. Ethanol (a liquid) is added to water and only a single layer is observed no matter how much ethanol is added. Ethanol and water are miscible.

Explanation:

When a substance (solute) dissolves partially in a solvent then it is known as partially miscible in the solvent. In such cases, a small amount of solute remains at the bottom of solution.

If a solute dissolves completely in solvent like water such that only one layer is seen in the solution then it means that the solute is miscible in solvent.

Thus, we can conclude that sugar is added to water and initially completely dissolves, but eventually solid sugar collects on the bottom of the container. Sugar and water are both partially miscible. This produces a dynamic equilibrium. Ethanol (a liquid) is added to water and only a single layer is observed no matter how much ethanol is added. Ethanol and water are miscible.

Answer:

The volume of the gas is fixed and will not change.

Explanation:

The volume of the gas will not change because there is no change in temperature. Temperature increases the volume of gases enclosed in a container.

Answer:

[Na⁺] = 1.99 M

Explanation:

Na₂S is a ionic salt that can be dissociated.

Dissociation equation is:

Na₂S  →  2Na⁺  +  S⁻²

1 mol of sodium sulfide can give 2 moles of sodium cation.

We convert moles of salt: 78 g . 1mol / 78.06 g = 0.999 moles

As ratio is 1:2, after dissociation we have (0.999 . 2) = 1.998 moles of Na⁺

Molarity is a type of concentration.

It indicates moles of solute in 1 L of solution and in this case, we have 1 L as final voulme.

Moles of Na⁺ are 1.998 moles. Then molarity (mol/L) is:

M =1.99 mol/L  

Answer:

1. Its formation requires very strong updrafts = a. Hail

2. Its formation requires falling through a layer of above-freezing air = d. Freezing Rain

3. Precipitation from cumuliform clouds is typically of this nature = c. Shower

4. Precipitation from stratus clouds is typically of this nature = Drizzle

Explanation:

Hail formation requires very strong updrafts, these updrafts are the upward moving air created in a thunderstorm. This period of noticeable thunderstorms creates hails.

Freezing rain requires the presence of warm air, it requires falling through a layer of above-freezing air to the colder air below to produce an ice coating on anything it drops on.

Showers are produced by cumuliform clouds which look like cotton balls. Since cumuliform clouds precipitate too, these clouds can have fluctuating rain in a day in the form of showers.

Drizzle which raises low visibility is considered a type of liquid precipitation since it also falls from a cloud. Drizzle which is obviously smaller in diameter when compared to that of raindrops, however, is common with stratus clouds.

Answer:

Li(s) + H2O(l) -----> LiOH(aq) + H2(g)

Ca(s) + 2H2O(l) ---------------> Ca(OH)2(aq) + H2(g)

Explanation:

Metals react with water to yield the metal hydroxide and hydrogen gas as shown in the answer above.

The reaction equations were balanced, the number of atoms of each element on both side of the reaction equation is exactly the same.

This is the way to write a balanced reaction equation for the species shown in the question.

Answer:

39.0229 amu

Explanation:

Hello there!

In this case, according to given information, the idea here is to multiply the percent abundance by the mass number of each isotope and then add them all together as shown below:

[tex]=0.0967*38+0.7868*39+0.1134*40+0.0031*41\\\\=3.6746+30.6852+4.536+0.1271\\\\=39.0229amu[/tex]

Regards!

Answer: The first law of thermodynamics is a statement of conservation of energy.

Explanation:

According to the first law of thermodynamics, heat provided to a system is actually the sum of internal energy and work done by the system or on the system.

Mathematically, [tex]\Delta Q = \Delta U + \Delta W[/tex]

The first law of thermodynamics also means that energy can neither be created nor it can be destroyed. Hence, energy is conserved.

Thus, we can conclude that the first law of thermodynamics is a statement of conservation of energy.

Answer:

The number of moles of H₃PO₄ that reacted is 0.000343 moles

Note: Some data is missing. Data from the attachment is used for the calculationsinnthe explanation below.

Explanation:

The reaction is a neutralization reaction between NaOH and H₃PO₄. The equation of the reaction is given as follows:

3 NaOH + H₃PO₄ ---> Na₃PO₄ + 3 H₂O

The molarity of the NaOH solution is 0.238 mol/L.

Average volume of NaOH used during the titration to arrive to endpoint = (4.6 + 3.9 + 4.5) mL / 3 = 4.33 mL

Molarity is defined ratio of the number of moles of solute to the volume of solution. Mathematically, molarity = number of moles/volume in Litres

Number of moles of NaOH reacted = 0.238 mol/L × (4.33mL × 1 L/1000 mL)

Number of moles of NaOH = 0.00103 moles

From the equation of the reaction, 3 moles of NaOH reacts with 1 mole of H₃PO₄

0.00103 moles of NaOH will react with 0.00103 x 1/3 moles of H₃PO₄ = 0.000343 moles of H₃PO₄.

Therefore, number of moles of H₃PO₄ that reacted is 0.000343 moles

the answer is silicon!!

Explanation:

So, first you will want to write the balanced chemical equation for this reaction.

Butane = [tex]C_4H_{10}[/tex]

[tex]2C_4H_{10}+13O_2=>10H_2O+8CO_2[/tex]

^ This ends up being your balanced chemical equation. Now, you can do the math!

[tex]1.57gC_4H_{10}*\frac{1molC_4H_{10}}{58.12gC_4H_{10}}*\frac{10molH_2O}{2molC_4H_{10}}*\frac{18gH_2O}{1molH_2O}[/tex]

After plugging this into a calculator, your final mass of water should be:

2.43gH2O

Answer:

1.5L of NaNO3 must be present

Explanation:

That contains 200g of sodium nitrate. Round to 2 significant digits

To solve this question we need to convert the mass of NaNO3 to moles using its molar mass (85g/mol). With the moles and the molar concentration we can find the volume in liters of the solution:

Moles NaNO3:

200g * (1mol / 85g) = 2.353 moles NaNO3

Volume:

2.353 moles NaNO3 * (1L / 1.60moles) =

Answer:

to the right (products side)

Explanation:

The equilibrium constant K describes the ratio between the concentration of products and reactants at equilibrium. For a general reaction:

a A + b B → c C + d D

The equilibrium constant expression is:

[tex]K = \frac{[C]^{c} [D]^{d} }{[A]^{a} [B]^{b} }[/tex]

A low value of K indicates that the concentration of products (C and D) is low in relation with the concentration of reactants (A and B).

Conversely, a high value of K indicated that the concentration of products is high compared with the concentration of reactants.

Since K = 6.4 × 10⁹ is a high value, the concentration of products is higher than the concentration of reactants at equilibrium. Thus, the position of the equilibrium is favored to the right.

Answer:

pKa = 4.89.

Explanation:

We can solve this problem by using the Henderson-Hasselbach equation, which states:

pH = pKa + log [tex]\frac{[A^-]}{[HA]}[/tex]

In this case [A⁻] is the concentration of sodium benzoate and [HA] is the concentration of benzoic acid.

We input the given data:

4.63 = pKa + log [tex]\frac{0.16}{0.29}[/tex]

And solve for pKa:

pKa = 4.89

Answer:

747.5 mL

Explanation:

Assuming ideal behaviour, we can solve this problem by using Boyle's law, which states that at constant temperature:

Where in this case:

We input the data given by the problem:

And solve for V₁:

Answer:

unsaturated fats, which are liquid at room temperature,are different from saturated fat because they contain one or more double bonds and fewer hydrogen atoms on their carbon chain.

Water is in the solid phase at 0.25 atm and 0°C.

A pressure of 50 kPa and a temperature of 50 °C correspond to the “water” region—here, water exists only as a liquid. At 25 kPa and 200 °C, water exists only in the gaseous state.

Under standard atmospheric conditions, water exists as a liquid. But if we lower the temperature below 0 degrees Celsius, or 32 degrees Fahrenheit, water changes its phase into a solid called ice.

Learn more about the solid phase here https://brainly.com/question/13396621

#SPJ2

Complete question:

What mass of steam initially at 120 ⁰C is needed to warm 200g of water in a 100 g glass container from 20.0 oC to 50.0 ⁰C

Answer:

the initial mass of the steam is 10.82 g

Explanation:

Given;

mass of water, m₁ = 200 g

mass of the glass, m₂ = 100 g

temperature of the steam = 120 ⁰C

initial temperature of the water, 20⁰ C

final temperature of the water, = 50⁰ C

let the mass of the steam = m

specific heat capacity of water c = 1 cal/g ⁰ C

specific heat capacity of glass c₂ = 0.2 cal/g ⁰ C

laten heat of vaporization of steam L = 540 cal/g

Apply principle of conservation energy;

Heat given off by the steam = Heat absorbed by water + heat absorbed by glass

[tex]mc\Delta T_1 + mL + mc\Delta T_2 = m_1c\Delta T_3 + m_2c_2\Delta T_3\\\\mc\Delta T_1 + mL + mc\Delta T_2 = [m_1c + m_2c_2]\Delta T_3[/tex]

m(1) (120 - 100)  +  m(540)  + m(1) (100 - 50) = [200(1)  +  100(0.2)] (50 - 20)

20m + 540m + 50m = 6600

610 m = 6600

m = 6600 / 610

m = 10.82 g

Therefore, the initial mass of the steam is 10.82 g

Answer:

"Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits, including apples, durians, pears, bananas, pineapples, and strawberries."

Explanation:

Answer:

See explanation

Explanation:

All molecules possess the London dispersion forces. However London dispersion forces is the only kind of intermolecular interaction that exists in nonpolar substances.

So, the only kind of intermolecular interaction that exists in dimethyl ether is London dispersion forces.

As for ethyl alcohol, the molecule is polar due to the presence of polar O-H bond. In addition to London dispersion forces, dipole-dipole interactions and specifically hydrogen bonding also occurs between the molecules.

Because ethyl alcohol is polar, it is more soluble in water than dimethyl ether.

Answer: The reaction, [tex]2C(s) + MnO_{2}(s) \rightarrow Mn(s) + 2CO(g)[/tex] is a single-displacement reaction.

Explanation:

A chemical reaction in which one element of a compound is replaced by another element participating in the reaction.

For example, [tex]2C(s) + MnO_{2}(s) \rightarrow Mn(s) + 2CO(g)[/tex]

Here, the element manganese is replaced by carbon atom. As only one element gets replaced so, it is a single-displacement reaction.

Thus, we can conclude that [tex]2C(s) + MnO_{2}(s) \rightarrow Mn(s) + 2CO(g)[/tex] is a single-displacement reaction.