Explanation:
It doesn't depends upon other.
It have it's own identity.
It's a lot easier to measure temperature than to measure the motion of component particles.
The moon is 250,000 miles away. How many feet is it from Earth? (dimensional analysis)
Answer:
1.261 billion
Explanation:The distance between the earth and the moon in miles is 250,000,so in feet,The distance is 1.261 billion
57. A red ball (m= 10 kg) is moving at 3 m/s. A green ball (m = 8 kg) is moving at 3.5 m/s. Which ball has more
energy and by how much (2)
Answer:
the green ball has 4J more energy
Explanation:
The kinetic energy is given by the formula
K = 0.5 m v^2
the kinetic energy of the red ball:
K(red) = 0.5*10*3^2= 45J
of the green ball:
K(green)=0.5*8*3.5^2 = 49J
therefore the green ball has more energy by 4 Joules
Which statement should he place in the region marked X?
Explanation:
The answer is Electrons move between objects.
write any two features of capital
Which of the following describes a sound wave?
A. Longitudinal wave that does not require a medium
c
B. Longitudinal wave that requires a medium
C. Transverse wave that does not require a medium
D. Transverse wave that requires a medium
which best esplains how the body maintains homeostasis.
a. All systems work together to stabilize the body .
b. Each systems work indepently to stabilize the body .
c. All systems works together to match the external environment.
d. Each system works indepently to match the external evironment.
a. all systems work together to stabilize the body
Chỉ ra kết luận đúng trong các kết luận sau:
A.
Chỉ có các hạt mang điện tích dương chuyển động có hướng mới tạo ra dòng điện.
B.
Chỉ có các hạt mang điện tích âm chuyển động có hướng mới tạo ra dòng điện.
C.
Khi nguyên tử chuyển động có hướng thì xuất hiện dòng điện.
D.
Các dụng cụ điện sẽ hoạt động khi có dòng điện chạy qua.
what is electricity???????
Explanation:
Electricity is defined as the rate of flow of charges in a conductor.hope it helps.stay safe healthy and happy...Answer:
Electricity is the presence and flow of electric charge. Using electricity we can transfer energy in ways that allow us to do simple chores . it's best - known form is the flow of electrons through conductor such as copper wires. The world "electricity " is sometimes used to mean "electrical energy "
Explanation:
hope it is helpful to you ☆
[tex]kavya[/tex]
An unbalanced 6.0-newton force acts eastward on an object for 3.0 seconds. The impulse
produced by the force is
18 N:s east
2 Nós east
18 N:s west
2 Nis west
Which of the following measures does not help promote technological progress?
issuing a patent to a company that invents a new product
increased wages for researchers
training programs for workers
reducing the scale of the market for a new product
Answer:
reducing the scale of the market for a new product
Explanation:
A product can be defined as any physical object or material that typically satisfy and meets the demands, needs or wants of customers. Some examples of a product are mobile phones, television, microphone, microwave oven, bread, pencil, freezer, beverages, soft drinks, automobiles, motorcycles, etc.
The use of technology in the manufacturing of a new product can be effectively and efficiently promoted in the market by doing the following;
I. Issuing a patent to a company that invents a new product. Patent can be defined as the exclusive or sole right granted to an inventor by a sovereign authority such as a government, which enables him or her to manufacture, use, or sell an invention for a specific period of time.
Generally, patents are used on innovation for products that are manufactured through the application of various technologies.
II. Paying a higher amount of money as wages for researchers who are saddled with the responsibility of making finding about a product.
III. Creating a training programs that would help to improve on the knowledge and skills of workers.
However, reducing the scale of the market for a new product in comparison with other products and standards does not help promote technological progress.
In a democracy how is rule of law regarded
Answer:
It is respected as leaders are accountable to the people. The rule of law within a democratic country will dictate what actions is considered wrong and punishable to do in that country. This will prevent people from harming and violating each other to get what they want and form a stable and safe society
Water exits straight down from a faucet with a 1.96-cm diameter at a speed of 0.55 m/s. The volume flow rate of the water as it exits from the faucet is Blank
1. Calculate the answer by read surrounding text. cm3/s. As the water falls from the faucet with the given speed, it accelerates due to gravity and reaches a speed of _______
2. Calculate the answer by read surrounding text. after it has moved 0.2 m downward. With this change in speed of the water, the diameter of the stream 0.2 m below the faucet is _______
3. Calculate the answer by read surrounding text. _________ cm.
Answer:
Q = 165.95 cm³ / s, 1) v = [tex]\sqrt{0.55^2 + 19.6 y}[/tex], 2) v = 2.05 m / s,
3) d₂ = 1.014 cm
Explanation:
This is a fluid mechanics exercise
1) the continuity equation is
Q = v A
where Q is the flow rate, A is area and v is the velocity
the area of a circle is
A = π r²
radius and diameter are related
r = d / 2
substituting
A = π d²/4
Q = π/4 v d²
let's reduce the magnitudes
v = 0.55 m / s = 55 cm / s
let's calculate
Q = π/4 55 1.96²
Q = 165.95 cm³ / s
If we focus on a water particle and apply the zimematics equations
v² = v₀² + 2 g y
where the initial velocity is v₀ = 0.55 m / s
v = [tex]\sqrt{0.55^2 + 2 \ 9.8\ y}[/tex]
v = [tex]\sqrt{0.55^2 + 19.6 y}[/tex]
2) ask to calculate the velocity for y = 0.2 m
v = [tex]\sqrt{0.55^2 + 19.6 \ 0.2}[/tex]
v = 2.05 m / s
3) We write the continuous equation for this point 2
Q = v₂ A₂
A₂ = Q / v₂
let us reduce to the same units of the SI system
Q = 165.95 cm³ s (1 m / 10² cm) ³ = 165.95 10⁻⁶ m³ / s
A₂ = 165.95 10⁻⁶ / 2.05
A₂ = 80,759 10⁻⁶ m²
area is
A₂ = π/4 d₂²
d₂ = [tex]\sqrt{4 A_2 / \pi }[/tex]
d₂ = [tex]\sqrt{ \frac{4 \ 80.759 \ 10^{-6} }{\pi } }[/tex]
d₂ = 10.14 10⁻³ m
d₂ = 1.014 cm
a uniform meter ruler is balanced at its midpoint
Answer:
a) i) x = 0.25 m, ii) x = 0.10 m, iii) x = 0.050 m
b) i) x = 0.40 m
Explanation:
a) For this exercise we use the rotational equilibrium equation, where we assume that the anticlockwise rotations are positive.
1) L = 2W
we set our reference system in the center of the bar where the fulcrum is
∑τ = 0
W 0.50 - L x = 0
x = 0.50 W / L
we substitute the value
x = 0.50 W / 2W
x = 0.25 m
ii) L = 5W
we calculate
x = 0.50 W / 5W
x = 0.10 m
iii) L = 10 W
x = 0.50 W / 10W
x = 0.050 m
b) a new weight is placed at x₂ = 30 cm on the left side
W 0.50 + W 0.30 - L x = 0
x = (0.50 + 0.30) W / L
x = 0.80 W / L
we calculate
i) L = 2W
x = 0.80 w / 2w
x = 0.40 m
A cricket player lowers his hands while catching the ball. wny?
What animal would your trapezius muscles look like if you concentrated on working it out
Answer:
If you went to work your trap muscles you don't need a ton of fancy gym equipment. Here are four trapezius exercises you can perform using your own body.
pushupshrupupright rowshoulder blade squeezeANSWER ASAP What happens to a circuit’s resistance (r) , voltage (v) , and current (l) when you decrease the length of the wire in the circuit ?
A . R decreases
V constant
l increases
B . R constant
V increases
l increases
C . R increases
V constant
l decreases
D . R increases
V decreases
I decreases
Answer:A
Explanation:i just took the test
Which of the following travels with a wave?
O A. Energy only
O B. Matter only
O C. Neither matter nor energy
O D. Both matter and energy
Answer:
A. Energy only is the answer to your question
2 What are(i) free fall , (ii) acceleration due to gravity, (iii) escape velocity , (iv) centripetal force?
Answer:
Explanation:
1. Free fall implies an object falling under the gravitational influence only. During the flight, no other force acts on it except the gravitational pull.
2. Acceleration due to gravity is the earth's natural force of pull on all objects on its surface, close to its surface, or in the region where the force can be felt. This force pulls object to the surface of the earth.
3. Escape velocity is the required minimum velocity for an object to leave the gravitational influence of the earth. It has a constant value which can be determined by;
Escape velocity = [tex]\sqrt{2gR}[/tex]
where g is the gravitation force of the earth and R is the radius of the earth.
4. Centripetal force is the force of pull that is required to keep a rotation object in its curved path.
TRUE OR FALSE. When non-conservative forces are present, the amount of work done increases with the length of the path.
Answer:
True
Explanation:
When non-conservative forces are present, the amount of work done increases with the length of the path, this is true because, when a force is applied, the force does when and the non-conservative forces also do work. Since the non-conservative force work against the force applied, this tend to increase the net work done by the applied force to compensate for the loss in energy due to the work done by the non-conservative forces.
Compared with dim light, what do light waves that look bright tend to have the subject just says science but the picker doesn't have that
Answer:
The brightness of a light depends on the amplitude of the light wave, which is the extent the waves moves from their equilibrium position. The brightness is also related to the amount of light that is emitted or reflected by an object
Therefore, compared to dim light, light that look bright have a higher amplitude and emit or reflect more light energy (photons)
Explanation:
An egg is dropped onto a wood floor and breaks. When a different egg (same mass) is dropped the same distance onto a foam pad on the wood floor, it does not break. Why (in terms of physics) does this happen?
A. The pad extends the time so the impulse changes.
B. An egg requires a harder surface so it won’t break.
C. The pad pulls the egg to the floor.
D. Wood is harder than the pad.
Answer:
A.
Explanation:
The pad extends the time so the impulse changes.
Answer:
A. The pad extends the time so the impulse changes
Explanation:
in term of physics it has same mass:)
2(a)
A car accelerates from 22ms^-1 to 43ms*-1 in 18.6 seconds.
(a) Calculate the acceleration of the car.
2(b)
Find the distance covered by the car in 10 seconds.
2(c) Find the velocity after 5 seconds.
Answer:
2a.
a=1.13ms^-2
2b.
S=277m
2c.
V=27.7ms-¹
Explanation:
Initial Velocity (U)=22m/s¹
Final Velocity (V)=43m/s²
Time(t) =18.6s
a. a=V-U/t
a=43-22/18.6
a=1.129
a=1.13m/s²
2b.
S=ut+1/2 at²
s=22(10)+1/2×1.13(10)²
s= 220+0.57(10)²
s= 220+0.57(100)
s= 220+57
s=277m
2c.
V=U+AT
V=22+1.13(5)
V=22+5.65
V=22+5.7
V=27.7m/s¹
49. A block is pushed across a horizontal surface with a
coefficient of kinetic friction of 0.15 by applying a
150 N horizontal force.
(a) The block accelerates at the rate of 2.53 m/s2
Find the mass of the block.
(b) The block slides across a new surface while
experiencing the same applied force as before.
The block now moves with a constant speed.
What is the coefficient of kinetic friction between
the block and the new surface?
Answer:
(a) 37.5 kg
(b) 4
Explanation:
Force, F = 150 N
kinetic friction coefficient = 0.15
(a) acceleration, a = 2.53 m/s^2
According to the newton's second law
Net force = mass x acceleration
F - friction force = m a
150 - 0.15 x m g = m a
150 = m (2.53 + 0.15 x 9.8)
m = 37.5 kg
(b) As the block moves with the constant speed so the applied force becomes the friction force.
[tex]F = \mu m g \\\\150 = \mu\times 37.5\\\\\mu = 4[/tex]
The summer camps had a field trip from the campus to Fragrance Hill. They traveled at an average speed of 65 km/h in the first 2 hours. After that, traveled at another average speed of 78 km/h. If the distance between the campus and Fragrance Hill is 364 km, what was the total time for the field trip?
Answer:
Explanation:
They traveled this distance in 2 parts, essentially. Part 1 had an average speed for a certain number of hours, part 2 had an average speed for a certain number of hours, and those 2 parts taken together took them a distance of 364 km. In equation form, that looks like this:
km/hr part 1 + km/hr part 2 = 364 km
Now we need to find each part on the left side of that equation. Part 1 first:
We traveled 65 km/hr for 2 hours, so that took us
[tex]65\frac{km}{hr}*2hr[/tex] and canceling out the hour label, we have that in part 1 we got
65(2) = 130 km. Good. Now onto the second part, where our unknown is.
We traveled 78 km/hr the second part for x hours, so that took us
[tex]78\frac{km}{hr}*xhr[/tex] and canceling out the hour label, we have that in part 2 we got
78x km. Now we can fill in the main equation (the one in bold print)
130 km + 78x km = 364 km and subtracting 130 km from both sides:
78x km = 234 km and dividing by 78 km:
x = 3 hours. Part 2 took 3 hours. Part 1 took 2 hours, so the whole trip took 5 hours.
When an object is in a gravitational field, it has energy in its __________ __________ energy store.
Answer:
Gravitational potential
Explanation:
Any object that is not on the surface of the Earth, but at a height instead has potential energy. Eventually, this can become kinetic energy once the object falls.
When an object is in a gravitational field, it has energy in its gravitational potential energy store.
Question 4(Multiple Choice Worth 3 points)
(03.02 MC)
Which statement best reflects a change in weather?
Today is cloudy, but tomorrow will be clear and sunny.
The average rainfall has decreased over the past five years.
Ocean temperatures are projected to increase over time.
Glaciers are melting more rapidly now than in the past 100 years.
plzzz helpppp asap
Answer:
a is your answer.............
The mass of a brick is 2kg. Find the mass of water displaced by it when it is completely immersed in water. (Density of the bricks is 2.5 g/cm^3)
Answer:
2000g
Explanation:
volume=mass/density
=2000/2.5
=800cm³
mass=density×volume
=800×2.5
=2000g
22) How is it possible to fill medicine in a syringe?explain
I hope this helps you ^-^
when is the mass of an object if it exerts a force of 160 N and an acceleration of 8.15m/s^2
Answer:
f=ma.......m=f/a......m=20kg
A light spring with force constant 3.05 N/m is compressed by 7.80 cm as it is held between a 0.400-kg block on the left and a 0.800-kg block on the right, both resting on a horizontal surface. The spring exerts a force on each block, tending to push the blocks apart. The blocks are simultaneously released from rest. Find the acceleration with which each block starts to move, given that the coefficient of kinetic friction between each block and the surface is 0, 0.035, and 0.397. (Let the coordinate system be positive to the right and negative to the left. Indicate the direction with the sign of your answer. Assume that the coefficient of static friction is the same as the coefficient of kinetic friction. If the block does not move, enter 0.)
Complete Question
A light spring with force constant 3.05 N/m is compressed by 7.80 cm as it is held between a 0.400-kg block on the left and a 0.800-kg block on the right, both resting on a horizontal surface. The spring exerts a force on each block, tending to push the blocks apart. The blocks are simultaneously released from rest. Find the acceleration with which each block starts to move, given that the coefficient of kinetic friction between each block and the surface is 0, 0.035, and 0.397. (Let the coordinate system be positive to the right and negative to the left. Indicate the direction with the sign of your answer. Assume that the coefficient of static friction is the same as the coefficient of kinetic friction. If the block does not move, enter 0.)
(a) u = 0 heavier block m/s2 m/s2 lighter block
(b)M = 0.035 heavier block m/s2 m/s2 lighter block
Answer:
a) [tex]A_h=0.297[/tex]
[tex]A_l=-0.59475[/tex]
b) [tex]a=0[/tex]
[tex]a=-0.25175m/s^2[/tex]
Explanation:
From the question we are told that:
Force constant [tex]k=3.05N/m[/tex]
Compression Length [tex]l_c=7.80cm=0.07m[/tex]
Left Mass [tex]M_l=0.400kg[/tex]
Right Mass [tex]M_r=0.800kg[/tex]
Coefficient of kinetic friction [tex]\mu=0, 0.035, and\ 0.397.[/tex]
Therefore
Spring force is given as
[tex]F_s=Kx[/tex]
[tex]F_s=3.05*0.070[/tex]
[tex]F_s=0.238N[/tex]
Generally the equation for Acceleration is mathematically given by
[tex]A=\frac{F}{m}[/tex]
For Heavier block
[tex]A_h=\frac{F_s}{m_r}[/tex]
[tex]A_h=\frac{0.238N}{0.8}[/tex]
[tex]A_h=0.297[/tex]
For Lighter blocks
[tex]A_l=\frac{F_s}{m_r}[/tex]
[tex]A_l=\frac{-0.238N}{0.4}[/tex]
[tex]A_l=-0.59475[/tex]
b)
Generally the equation for Force is mathematically given by
[tex]F_s-F=ma[/tex]
For Heavier block
[tex]F>Fs[/tex]
Therefore
[tex]a=0[/tex]
For Lighter blocks
[tex]F-F_s=ma[/tex]
[tex](0.035)(0.4)(9.8)-(0.2379)=(0.4)a[/tex]
[tex]a=-0.25175m/s^2[/tex]
