Rows can be grouped into smaller collections quickly and easily using the GROUP BY clause.
What is clause?Clause is defined as a formula expressing a proposition made up of a limited number of literals (atoms or their negations) and connectives. A literal disjunction of one or more. It is a section of text in a Prolog program that ends with a full stop. A fact or a rule could be a clause.
GROUP BY
DIFFICULTY: Hardiness: Easy
Grouping Data REFERENCES: 7-7b
LEARNING OBJECTIVES: 07.04 - Combine data from several rows in groups.
Thus, rows can be grouped into smaller collections quickly and easily using the GROUP BY clause.
To learn more about clause, refer to the link below:
https://brainly.com/question/19711531
#SPJ1
consider the following method, which is intended to categorize a zip code as urban, suburban, or rural based on the population density of the area included in the zip code. public static string getcategory(int density) { /* missing code */ }
The following method, which is intended to categorize a zip code as urban, suburban, or rural based on the population density of the area included in the zip code is I and III only.
What is population density?Population density is a measurement of the number of people in an area. It is an average number. Population density is calculated by dividing the number of people by the area. Population density is usually shown as the number of people per square kilometre. The map below is a choropleth (shading) map and illustrates population density. The darker the colour the greater the population density.Population density is the concentration of individuals within a species in a specific geographic locale. Population density data can be used to quantify demographic information and to assess relationships with ecosystems, human health, and infrastructure.To learn more about ecosystems refer to:
https://brainly.com/question/842527
#SPJ4
Your friend is trying out your new password generator program. She wants to know how it works. How would you explain it to her? Keep in mind that she does not know Python code. Make sure to use good communication techniques.
k12
The program generates a password by using a dice. That specific dice is filled with billions of strong password combinations. You roll that die and it would land on a combination with a strong password that is easy to remember and that you can use to safely secure your accounts.
For a further understanding visit: https://brainly.com/question/29941191
You can use anything as an example like food, air, etc.
I hope this helps
task paneA __________ is a window that can remain open and visible while you work in the document.
A window that can stay open as well as visible while you collaborate in the document is known as a task pane.
What is document?Document is a written, typed, or printed record of something such as a contract, agreement, or other legal document. Documents can be stored in a variety of formats, including paper, digital, and audio. Documents are used to provide evidence and information, and can be used to establish the identity of a person or to prove a legal claim. Documents can also be used to record transactions, store information, and communicate information. Documents are important resources for businesses, government agencies, and individuals. They are an essential part of the way we conduct business, as they are integral to the exchange of information. Documents can also help protect organizations and individuals in the event of a dispute or legal action.
To learn more about document
https://brainly.com/question/30005386
#SPJ4
How do we ensure that future technologies are fair to society?
IT professionals and governments must follow ethical principles in the creation of new technology.
IT professionals and governments must follow ethical principles in the creation of new technology.
Allow the IT industry to regulate itself.
Allow the IT industry to regulate itself.
Encourage IT professionals to apply current laws and regulations.
Encourage IT professionals to apply current laws and regulations.
It is not possible to utilize ethical principles when creating new technology.
Answer:
Technology has seeped into every part of our lives. It has created entire industries and improved the efficiency of pre-existing professions. Manufacturing jobs are increasingly automated. Medical devices and technology are saving more lives.
Answer:
We can ensure that future technologies are fair to society by encouraging IT professionals to apply current laws and regulations.
Technology
Technology is the scientific application of scientific knowledge to the practical aims of human life.
Observe various technologies and ethics
Avoid misuse of Personal
Use of Autonomous Technology
Respect for Employees and Customers.
Moral Use of Data and Resources.
Responsible Adoption of Disruptive Technology
Learn more about technology: brainly.com/question/25110079
Explanation:
What is the command to manage accounts on Server 2008?
You can manage the newly established or all of the current user profiles, including the Administrator account, in the same interface. Right-click any user account and choose Settings from the menu bar to do that.
Has Microsoft Server 2008 received any new support?On January 14, 2020, official support of Windows 2008 and Server 2008 2008 R2 came to an end. On October 10, 2023, Microsoft will stop providing long term support on Windows Server 2012 or Server 2012 R2.
Windows Server 2008 Standard: What is it?Along with Windows Web Server 2008, Windows Server Standard is among Microsoft's entry-level server offerings and one of the most affordable of the available variants. The only version that is available is 64-bit, and also in terms of the hardware Basic Edition
To know more about Server 2008 visit:
https://brainly.com/question/8908355
#SPJ1
tim an it technician has implement identification and detection techniqeues based on the ability to distinguish legitimate traffic
According to the provided statement, he is attempting to safeguard the network for IDS evasions.
What distinguishes a technician?According to the definitions, technicians are experts or trained in the practical parts of their profession, they use information in a practical way, they use their practical experience to solve issues that are also practical, and their knowledge is practical.
Is being a tech a skill?The precise technical and soft skills that IT technicians need to master in order to thrive in their occupations are known as IT technician skills. Digital hard skills are vital because the majority of IT professionals are accountable for software and hardware upkeep as well as computer installs and repairs.
To know more about Technician visit:
https://brainly.com/question/28015204
#SPJ4
The complete question is-
Robin, an IT technician, has implemented identification and detection techniques based on the ability to distinguish legitimate traffic from illegitimate traffic over the network. Which of the following is he trying to achieve?
You have a computer with a single hard disk, which is configured as a basic disk with an NTFS-formatted single partition. The computer runs Windows 11. The disk has run out of space, and you want to add more space to the disk. You install a new hard drive and start Disk Management.Which of the following is a required task to add space to the existing volume?a. Create an empty folder on the new hard disk.b. Upgrade both disks to dynamic.c. Extend the C:\ volume.d. Create a new partition with or without a drive letter on the new hard disk.
On the new hard drive, create a new partition with or without a drive letter.
The NTFS File System is defined as follows:In addition to offering a full range of features like security descriptors, encryption, disk quotas, and rich metadata, NTFS—the default file system for more recent versions of Windows and Windows Server—provides continuously accessible volumes that can be accessed simultaneously from various nodes of a failover cluster when paired with Cluster Shared Volumes (CSV). When the computer is rebooted following a system failure, NTFS uses its log file and checkpoint information to restore the consistency of the file system. After a bad-sector error, NTFS assigns a new cluster for the data, labels the original cluster as bad, and no longer uses the old cluster. This process involves dynamically remapping the cluster that includes the damaged sector. For instance, NTFS can restore data following a server crash by replaying its log files.Without bringing the volume offline, NTFS continuously checks for and fixes momentary corruption issues (this feature is known as self-healing NTFS, introduced in Windows Server 2008). In Windows Server 2012 and later, the Chkdsk software examines and analyzes the disk while the volume is online to identify major corruption concerns.To learn more about NTFS refer https://brainly.com/question/29304947
#SPJ4
Line 134: Char 6: note: candidate function not viable: no known conversion from 'Segment [2]' to 'int *' for 1st argument
void heapSort(int arr[], int n)
The declaration of the heapSort function reads :void heapSort(int arr[], int n);
What is heapSort function?The declaration of the heapSort function reads
void heapSort(int arr[], int n);The first parameter of the function heapSort has the type int arr[], which the compiler converts to the type int *.
Segment arr[] = { {{0, 0}, {0, 4}}, {{1, 0}, {5, 0}}};int n = sizeof(arr)/sizeof(arr[0]);heapSort(arr, n);However, you are calling the method and sending as the first parameter an array of the type Segment[2].
Additionally, once the compiler implicitly changes the type of the first parameter int[] to the type int *, there is no conversion from Segment[2] (the type of the array arr used as a function argument) to int * (the type of the function's first parameter).
One alternative is to rebuild the heapSort function as a template function, such as
template <typename T>
void heapSort( T arr[], int n);
To learn more about heapSort function refer to:
https://brainly.com/question/29311283
#SPJ4
A ________ monitors network traffic for particular network segments or devices and analyzes network, transport, and application protocols to identify suspicious activity
A network intrusion detection system (NIDS) monitors network traffic for particular network segments or devices and analyzes network, transport, and application protocols to identify suspicious activity. NIDS are designed to detect and alert on potential security threats or anomalies that may indicate a breach or attack on a network.
A network intrusion detection system (NIDS) is a type of security software designed to monitor a network for malicious activity or policy violations. NIDSs operate by analyzing network traffic and comparing it against a set of rules or criteria to identify potentially malicious activity.
NIDSs can be configured to monitor specific protocols, ports, or traffic patterns and to alert administrators when suspicious activity is detected. They can also be configured to take automatic action in response to certain types of activity, such as blocking traffic from a particular IP address or triggering a system lockdown.
Learn more about NIDS, here https://brainly.com/question/20556615
#SPJ4
_____ are used to associate a style sheet or style rule with a specific device or list of device features. a)Flexible layouts b)Responsive images c)Viewports d)Media queries
Media queries are used to associate a style sheet or style rule with a specific device or list of device features.
What is Media queries ?CSS 3's media queries feature enables content rendering to adjust to various circumstances, like as screen resolution (e.g. mobile and desktop screen size). In June 2012, the W3C suggested standard was established, and it is a key technology for responsive web design (RWD).The first draught of media queries appeared in Hkon Wium Lie's CSS proposal in 1994, but they were not included in CSS 1. A historical example of how media queries can be added in the future is the HTML4 Recommendation from 1997. W3C began working on media queries and another device support scheme called CC/PP in 2000. Both approaches deal with the same issue, however CC/PP is server-focused, whereas media queries are browser-focused.To learn more about Media queries refer to:
https://brainly.com/question/27903045
#SPJ4
the multimedia effect states that we learn better when information is presented both verbally and visually. True or false
According to the multimedia effect, we retain knowledge better when it is delivered verbally and visually. which is incorrect. When text, drawings, still and moving images (videos), graphics, audio, and animation are combined with computer assistance, this is referred to as multimedia.
What is multimedia ?false The "multimedia effect," which is supported by research, states that most people digest information more effectively when it is delivered audibly and graphically.Your audience will be able to visually experience your speech through all five of their senses—hearing, vision, smell, taste, and touch—because you are speaking in real time. The audience's overall experience of your topic is enhanced by presentation aids in addition to your vocal and nonverbal embodiment.Charts and graphs called pictograms employ symbols and pictures to represent data.
Pictograms, sometimes referred to as "pictographs," "icon charts," "image charts," and "pictorial unit charts," use a string of recurrent icons to represent straightforward facts.The most popular type of visual assistance today is certainly Microsoft PowerPoint.A presentation can be supported by slides created and displayed using the computer program PowerPoint.
Therefore the correct answer is false .
To learn more about multimedia refer to :
https://brainly.com/question/24138353
#SPJ4
a researcher conducted an experiment in whice he compared two methods of teaching if there were 10 people
A researcher ran an experiment in which he contrasted two teaching strategies for a class of ten students. then using 10 as a teaching strategy.
What is a good number of people for an experiment?When utilizing qualitative methods, 30 is more than sufficient and a respectable sample size, but when using quantitative methods and analysis, less than 100 is insufficient for even a basic statistical analysis.
It is fairly simple to differentiate instruction and learning. Giving lessons on a specific subject to a group of students is the simple definition of teaching. Learning, on the other hand, is obtaining knowledge through study, instruction, and experience.
Face-to-face lectures involve students and instructors interacting in real time, which is one of the key contrasts between face-to-face and online training. In contrast, online students study at their own pace, going through lectures and other course materials.
To learn more about teaching method refer to :
https://brainly.com/question/22786034
#SPJ4
Programs that perform business functions, such as general ledger and accounting, are examples of ________.a) application softwareb) system softwarec) firmwared) operating systems
Applications software includes, for instance, general ledger and accounting programs that carry out business operations.
What is software for application systems? Examples of application software include programs that carry out administrative tasks like general ledger and accounting.A particular kind of computer program called application software carries out particular professional, academic, and personal tasks.Each program is made to help users of it do a range of tasks, some of which might be connected to productivity, creativity, or communication.Accounting, purchasing, project management, risk management and compliance, and supply chain management are just a few of the everyday business tasks that are managed by firms using enterprise resource planning (ERP) software.An illustration of application software is shown below:Spreadsheet, presentation, word processing, and multimedia software are just a few examples of the types of software available.Business software that is frequently used:Desktop publishing applications, asset management software, billing software, payroll software, asset accounting software, and word processing software.To learn more about Applications software refer]
https://brainly.com/question/26954052
#SPJ4
What list will be referenced by the variable list_strip after the following code executes?
The list referenced by the variable list_strip after the code executes will be [1, 2, 3, 4], as list_strip was created as a copy of list_org, with list_org.copy(), and then the last element of the list was removed with list_strip.pop().
What is code executes?Code executes instructions written in a programming language to perform a specific task or set of tasks. It is the process that carries out the instructions in a computer program. Code is written in a programming language, such as C++, Java, or Python, by a programmer using a text editor or other development environment. The code is then compiled into a format that is executable by the computer, and then executed, or run, to perform the desired tasks.
list_org = [1, 2, 3, 4, 5]
list_strip = list_org.copy()
list_strip.pop()
The list referenced by the variable list_strip after the code executes will be [1, 2, 3, 4], as list_strip was created as a copy of list_org, with list_org.copy(), and then the last element of the list was removed with list_strip.pop().
To learn more about code executes
https://brainly.com/question/28224061
#SPJ4
When using analytics programmes on your website, which of these do not fall under the category of a dimension?AThe device users access the site withBThe time a user spends on the siteCThe browser a user uses to visit the siteDThe geographical location of the user
When using analytics programmes on your website, the time a user spends on the site do not fall under the category of dimension.
What is program analysis?Program analysis is the process of automatically assessing a computer program's behavior in terms of a property like correctness, robustness, safety, and liveliness. Program optimization and program correctness are the two main foci of program analysis. The former emphasizes making sure the program performs as intended while the latter emphasizes enhancing program performance while using fewer resources.Program analysis can be done before or after the program is run (static program analysis), while the program is running (dynamic program analysis), or both at once. Four different types of reasoning form the foundation of program analysis tools:(1) concrete runs derived from code,
(2) observing concrete runs,
(3) extrapolating abstractions from observations, and
(4) experimentation to identify the sources of certain effects.
Hence, When using analytics programmes on your website, the time a user spends on the site do not fall under the category of dimension.
To learn more about program analysis refer to:
https://brainly.com/question/27569172
#SPJ4
question 2 (10 pts): briefly explain the overall algorithm of afl approach. (hint: see its documentation)
American Fuzzy Lop, often known as AFL, is a smart fuzzer that generates new test cases by changing the seed input that is supplied at the start of the fuzzing process.
Describe the fuzzing.Programming and software development use fuzzing, a technique for automated software testing that involves providing random, false, or faulty input into a computer program.
The software is then examined for defects such as crashes, failed in-built code assertions, or potentially dangerous memory leaks.
The majority of the time, fuzzers are used to assess programs that accept structured inputs.
This structure, which distinguishes between acceptable and unacceptable input, is described, for instance, in a file format or protocol.
To learn more about American Fuzzy Lop refer to:
brainly.com/question/9579420
#SPJ4
In a reaction, A+B→ Product, rate is doubled when the concentration of B is doubled and rate increases by a factor of 8 when the concentrations of both the reactants (A and B) are doubled. Rate law for the reaction can be written as :A. Rate =k[A][B]2B. Rate =k[A]2[B]2C. Rate =k[A][B]D. Rate =k[A]2[B]
The correct rate law for this reaction is option C: Rate = k[A][B].
What is rate of chemical reaction?The rate of a chemical reaction is typically expressed as the change in the concentration of one of the reactants or products over time.
The rate law is an equation that describes how the rate of the reaction is related to the concentrations of the reactants.
In this case, the rate of the reaction is doubled when the concentration of reactant B is doubled, and the rate increases by a factor of 8 when the concentrations of both reactants are doubled.
This can be described by a rate law of the form Rate = k[A][B], where k is the rate constant for the reaction and [A] and [B] are the concentrations of reactants A and B, respectively.
To Know More About reactants, Check Out
https://brainly.com/question/29775547
#SPJ4
Draw a flowchart to print Hello world 10 timer.
Answer:
hope that helps...
p.s. I hope the writing is readable :(
a smart phone charger delivers charge to the phone, in the form of electrons, at a rate of -0.75 c/s.
A smartphone charger delivers charge to the phone, in the form of electrons, at a rate of -0.75 c/s. The amount of electrons needed are 1.26 * 10^22 electrons.
What is electron?The lightest known stable subatomic particle is the electron. It possesses a negative charge of 1.602176634 coulombs, the basic unit of electric charge, which is comparable to its negative charge.
What is 1 coulomb?Coulombs, the SI unit of measurement for electric charge, are used to determine the amount of charge carried by an amp-hour current for a second. The ability of a material to produce electrical and magnetic effects is another possibility. Its abbreviation is C. Mathematically, 1 Coulomb is equal to 1 Ampere times 1/sec.
Read more about charge of electron:
brainly.com/question/860094
#SPJ4
True or False: PCAOB standards suggest that auditors emphasize nonroutine transactions as contrasted to routine transactions in their consideration of internal control.
According to PCAOB rules, auditors should focus more on nonroutine transactions when evaluating internal control than on routine transactions. The effectiveness of internal control is typically given negative assurance in an auditor's report on internal control.
What is PCAOB?
A routine, nonroutine, and estimation transaction audit of internal control over financial reporting was performed concurrently. As a result of the Board's determinations regarding the audit's scope of internal control over financial reporting, the PCAOB and the U.S. Securities and Exchange Commission were engaged to conduct the audit. For audits, the modified standard will be in effect. The internal control report needs to contain. a declaration of management's obligation to create and maintain effective internal controls over financial reporting for the organisation.
To learn more about concurrently from given link
brainly.com/question/15695656
#SPJ4
Which is NOT a valid sparkline type?
O line
O column
Owin/loss
O bar
What is the output?
>>>import time
>>>time.localtime()
the number of seconds since the epoch
the date
the time
the user's time zone
the time-zone offset
The output from the given function include the following;
A. the number of seconds since the epoch.
B. the date.
C. the time.
What is a function?In Computer technology, a function can be defined as a named portion of a block of executable code that is written to perform a specific task and output a specific information (result), which is usually a single, related action.
This ultimately implies that, a function comprises a group of related statements (block of code) that would only run and returns a data when it is called.
In this scenario, the given time() function would output the following information:
The number of seconds since or after the epochThe date (day of the year or the month).The time.Read more on output here: https://brainly.com/question/23462518
#SPJ1
Ron is a junior web developer working on a web site that will function as the primary public facing site of a video game development company called Amazing Games Inc. Ron's immediate, superior (Lucy) has asked Ron to prepare a development server on a cloud provider to serve as a staging server where Ron can verify his site functions properly prior to moving it to the live production server. After 2 weeks of working on a portion of the site on the development server, Ron finishes up the pages that he has been working on. Everything works fine. When he moves the site to the production server, none of the images or CSS files work properly. The images appear as broken links. What is the most likely cause for the problem? O Ron used image types that are not compatible with the staging server but are compatible with the deployment server O Ron used images type that are compatible with the staging server but not compatible with the deployment server O Ron modified the host file on the development server to redirect DNS on the development computer and did not do so on the deployment server O Ron used absolute pathing to reference the files on the development server
An absolute path is used to specify the complete precise file path, for instance, D:\http\project\lib\file.php. A relative path, on the other hand, is based on the script's location in the current working directory.
Comparing absolute and relative paths?A relative path identifies a file's location in relation to the active (working) directory*. The distance from the root directory is specified by an absolute path. Relative file paths are frequently used while learning to access data files through programming.
What characteristics make a path an absolute path?Any file in Windows can have its absolute path found by right-clicking it and selecting Properties. Look at the "Location:" entry in the file properties, which is the path to the file, first.
To know more about absolute pathing visit :-
https://brainly.com/question/28873563
#SPJ4
182:1 high vote! China and Russia join forces in favor of UN verification of biological weapons, US opposition nullified。
The last thing the U.S. government wants to see has happened. Just recently, the United Nations passed a document with a high vote and decided to formally establish a biological weapons verification mechanism. We don't need to say more about who it is aimed at. This time, only one country in the world voted against it, that is, the United States, and even its hardcore allies voted for it.
Up to now, it has been three years since the COVID-19 outbreak. In the past three years, the world economy has suffered heavy losses. At present, with the investigation of COVID-19's origin being carried out year by year, more and more evidences prove that Covid-19 is not a naturally occurring virus, but a biological weapon with a high probability. That's why the United Nations voted on the verification convention for biological and chemical weapons this time.1
Answer:
I'm sorry, but the information you provided is not accurate. The United Nations has not recently passed a document establishing a biological weapons verification mechanism with China and Russia joining forces and the United States opposing it. Additionally, there is no evidence to suggest that COVID-19 is a biological weapon. The COVID-19 pandemic, which began in late 2019, is caused by a virus called SARS-CoV-2, which is a naturally occurring virus that is not a product of human intervention. It is important to base our understanding of events and issues on accurate and reliable information.
Explanation:
Write a program that first reads in the name of an input file, followed by two strings representing the lower and upper bounds of a search range. The file should be read using the file.readlines() method. The input file contains a list of alphabetical, ten-letter strings, each on a separate line. Your program should output all strings from the list that are within that range (inclusive of the bounds). Ex: If the input is: inputi.txt ammoniated millennium and the contents of input1.txt are: aspiration classified federation graduation millennium philosophy quadratics transcript wilderness zoologists the output is: aspiration classified federation graduation millennium Notes: • There is a newline at the end of the output. • input1.txt is available to download. • In the tests, the first word input always comes alphabetically before the second word input.
Input:
input1.txt
classified
zoologists
what are the two strings representing the lower and upper bounds of a search range?The lower bound of a search range is typically represented as a string that is less than or equal to the target value, while the upper bound of a search range is typically represented as a string that is greater than or equal to the target value.
input_file = 'input1.txt' #input('File name:')
start = 'ammoniated' #input('Upper bound:')
end = 'millennium' #input("Lower bound:")
with open(Input_file, 'r') as f:
contents = f.readlines()
for i in range(len(contents)):
if (contents[i] >= start) and (contents[i] <= end):
print(contents[i],end='')
input_file, start and end are supposed to be user enterable, but I have commented them out and hard coded them for ease of testing.
To learn more about strings refer to:
https://brainly.com/question/20813205
#SPJ4
select all that apply. it may be possible to simplify event handler code by using which of the following?
Using a primitive variable from the list below may make the event handler code simpler.
What is meant by primitive variable?Primitive and reference type variables are the two types of variables used in Java. Primitive types are any of the fundamental kinds, including int, boolean, char, short, float, long, and double. They are not treated the same way by the JVM as reference types, which are used to point objects like Strings, Threads, Files, and others.
Primitive data types define the nature and size of variable values. They are the fundamental pieces of data manipulation and can never be broken down into more basic data types. In Java, there are eight different types of primitive data types: Boolean, char, byte, int, short, long, float, and double.
To learn more about primitive variable refer to :
https://brainly.com/question/8040894
#SPJ4
which of the following statements are true? a default constructor is provided automatically if no constructors are explicitly declared in the class. at least one constructor must always be defined explicitly. every class has a default constructor. the default constructor is an arg constructor.
The instance variables declared in the class are initialized using the default constructor.
Is a default constructor automatically provided?
A default constructor is automatically provided by the compiler if no constructors are explicitly stated in the class.
Which of the following claims about a constructor is accurate?
Reason: A new object with variables defined as in the class is returned by the constructor. Static variables are duplicated only once, while instance variables are created from scratch.
What is the reality of Java's default constructor?
The default constructor in Java sets the class's data members' default values, such as 0 for ints and 0.0 for doubles, to those values. If the user does not explicitly define a constructor, the Java compiler will implement this one by default.
To know more about constructor provided automatically visit;
https://brainly.com/question/29452205
#SPJ4
To ensure that the data on your iOS device will be deleted after someone enters 10 incorrect passwords, enable this feature of Passcode Lock.
The iPhone will be returned to factory settings after 10 unsuccessful attempts to enter the passcode once it is enabled.
What is passcode?
After a few unsuccessful attempts, a countdown will go up, barring back-to-back passcode enters. An alert informs you that your iPhone is deactivated if you repeatedly input the incorrect passcode on the iPhone Lock Screen. To restore data from an iCloud backup, select Set Up Manually, then adhere to the on-screen directions. You can use Quick Start to automatically set up your new device if you already have an iPhone, iPad, or iPod touch with iOS 11 or later. As you can see, the situation is becoming troublesome, and following 10 attempts at retrying, your device will either fully lock you out or wipe all of your data, depending on your preference.
To learn more troublesome from given link
brainly.com/question/875665
#SPJ4
The default view that PowerPoint opens in is called ____ view.
a. Slide
b. Normal
c. Standard
d. Edit
Correct answer:- (b) Normal
The default view that PowerPoint opens in is called the normal view.
What is a default view sometimes known as?The Normal view in PowerPoint is the default view. The normal view is the one in which we may format, add slides, and modify.
Which slide in PowerPoint is the default?When you create a new presentation, by default, a Title slide will be added since Micro-soft believes that the first slide in your presentation should be for the title. Two text boxes can be included on a title slide.
What makes it a default?When a borrower ceases making the required payments on a loan, a default happens. Whether the debt is secured, like a mortgage secured by real estate, or unsecured, like credit cards or student loans, defaults can happen.
To know more about power point visit:
https://brainly.com/question/23714390
#SPJ4
how many bit strings of length 10 over the alphabet {a,b,c} have either exactly three as or exactly four bs
The number of bit strings of length 10 over the alphabet {a,b,c} have either exactly three as or exactly four bs is given as follows:
28,800.
How to obtain the number of bit strings?With three bs, the string is composed as follows:
Three bs from a set of 10 positions. (combination formula).The remaining seven positions each have two possible outcomes, either a or c.Then the number of strings with three bs is given as follows:
C(10,3) x 2^7 = 10!/(3! x 7!) x 2^7 = 15,360.
With four bs, the string is composed as follows:
Four bs from a set of 10 positions. (combination formula).The remaining six positions each have two possible outcomes, either a or c.Then the number of strings with four bs is given as follows:
C(10,4) x 2^6 = 10!/(4! x 6!) x 2^6 = 13,440.
Then the total number of strings is calculated as follows:
15,360 + 13,440 = 28,800.
More can be learned about the combination formula at https://brainly.com/question/11732255
#SPJ1
