Select all the correct images.
Select the atoms that belong to the same element.
16 protons 16 neutrons
16 electrons
11 protons 10 neutrons 11 electron
13 protons 14 neutrons 13 electrons

Answer:

NAF IS AN IONIC COMPOUND

Explanation:

Answer:

Explanation:

CO2 is a covalent bonding. It is something from the middle of the periodic table bonded with something on the right of the periodic table. It is not ionic.

NH3 is also covalent. The H bonds with the N and the H has properties that resemble both the metals and non metals. That's why it is on both the left and right sides of the periodic table. In this case, it is more non metallic than metallic. Since Nitrogen is on the right side of the table, you have a situation where 2 nonmetals are bonding. It is not ionic.

The answer is NaF. Sodium is on the left side of the periodic table and F is on the right side. That's what it takes to get an ionic bond.

Answer:

Sensors and evacuation planning.

Explanation:

Sensors that provides information about hurricane and evacuation planning are the two steps that can reduce the vulnerability of the United States to hurricanes. Sensors provides information about hurricane so we can prepare ourselves about it and the evacuation plan helps in order to quick displacement of people from the hurricane area so these two steps can reduce the vulnerability of the US to hurricanes.

Explanation:

this is a single Replacement Reaction, so Na and Cl will form a bond.

Explanation:

Sublimation is the conversion between the solid and the gaseous phases of matter, with no intermediate liquid stage

Answer:

See explanation and images attached

Explanation:

The first image shows the structure of hydrogen peroxide. It does not exist as resonance structures. The structure and properties of the molecule can wholly be explained on the basis of a single Lewis structure.

However, the structure of the bicarbonate ion in sodium bicarbonate can not be completely described by a single Lewis structure. Hence, two resonance structures are shown for the bicarbonate ion. In each case, Na^+ is the counter ion.

Answer:

%C = 60.9%; %H = 15.4%; %N = 23.7%

Explanation:

Step 1: Given data

Step 2: Calculate the percent composition of this compound

To calculate the percent by mass of any element (E), we will use the following expression.

%E = mE/m × 100%

%C = 7.34 g/12.04 g × 100% = 60.9%

%H = 1.85 g/12.04 g × 100% = 15.4%

%N = 2.85 g/12.04 g × 100% = 23.7%

Answer: The volume of NaOH required at the half-equivalence point is 6.21 mL

Explanation:

The chemical equation for the reaction of a weak acid with NaOH follows:

[tex]HA+ NaOH\rightarrow NaA+H_2O[/tex]

From the equation, we can say that NaOH and weak acid is present in a 1 : 1 ratio.

We are given:

Volume of NaOH required at equivalence point = 12.42 mL

The volume of NaOH required at half-equivalence point will be = [tex]\frac{12.42mL}{2}=6.21mL[/tex]

Hence, the volume of NaOH required at the half-equivalence point is 6.21 mL

The volume of NaOH at the half-equivalence point is 6.21 mL

The equivalence point is the point at which equal amount of the acid and base have reacted.

Half equivalence point = Equivalence point / 2

Half equivalence point = 12.42 / 2

Half equivalence point = 6.21 mL

Therefore, we can conclude that the volume of NaOH at the half-equivalence point is 6.21 mL.

Learn more about titration:

https://brainly.com/question/14356286

Answer:

.This is because gravity pulls down harder on the heavier one, which increases its friction with the floor

Mark me as Branliest

Answer:

Concentration C = 0.0189 mol/L

Explanation:

From the given information:

Let consider the formula used in calculating the concentration according to Beer's law:

[tex]\mathtt{A =\varepsilon \times L \times C}[/tex] --- (1)

here;

A = absorbance

ε = coefficient of molar absorptivity

L = path length

C = concentration (mol/L)

Also, from Beer law plot:

y = mx+b

where,

y represent absorbance A

b represents intercept

m represents the coefficient of molar absorptivity ε

and x represents the concentration(C).

replacing the substituted entities

A = ε × C + b ---- (2)

Making the concentration the subject of the above formula:

[tex]C = \dfrac{A-b}{\varepsilon}[/tex]----(3)

From y = 11.589x - 0.0002

A = 11.589 *C - 0.0002

Given that:

A = 0.219

∴

0.219 = 11.589 *C - 0.0002

0.219 + 0.0002 =  11.589 *C

C = 0.2192/11.589

C = 0.0189 mol/L

Answer:

D

Explanation:

8oz=1cup

Xoz=1/4cup

cross multiply

Xoz=8×1/4=2

2oz=1/4cup

1oz=2T

2oz=x

cross multiply

×=2×2=4T

The cup of butter, number of tablespoons and ounces of butter are all in direct proportion with one another. The interpretation of the information provided is:

(b). The information provided gives the conversion factor 8oz/1 cup.

Given that:

[tex]1\ recipe = \frac{1}{4}\ cup[/tex]

[tex]1\ oz = 2T[/tex]

[tex]8\ oz = 1\ cup[/tex]

Multiply both sides of [tex]1\ oz = 2T[/tex] by 8

[tex]8 \times 1oz = 8 \times 2T[/tex]

[tex]8 oz = 16T[/tex]

Substitute 8oz for 1 cup in: [tex]1\ recipe = \frac{1}{4}\ cup[/tex]

[tex]1\ recipe = \frac{1}{4} \times 8oz[/tex]

Substitute [tex]8 oz = 16T[/tex]

[tex]1\ recipe = \frac{1}{4} \times 16T[/tex]

[tex]1\ recipe = 4T[/tex]

The interpretations are as follows:

Hence, (b) is correct

Read more about direct proportions at:

https://brainly.com/question/1266676

Answer:

Add some water to his solution

Explanation:

Ion pair effect refers to strong electrostatic interaction between oppositely charged ions in solution. Such strong interaction affects solute- solvent interaction when an ionic substance is dissolved in water.

High solute concentration may lead to ion-pair effect. Hence, the ion pair effect may be minimized by adding more water (decreasing the concentration of the solution).

To reduce the ion- pair effect, Andy needs to add some water to his solution (dilution).

The activity that would reduce the ion-pairing effect in his AICI₃ solution is : ( B ) add some water to his solution

Ion pair effect is a strong electrostatic interaction seen between ions with opposite charges, when an ionic substance is been dissolved in a solvent such as water this effect will affect the dissolution of the substance.

High concentration of the solute in a solution also leads to the ion pair effect therefore for Andy to reduce the ion-pairing effect in his solution he has to add more water to reduce the concentration of the solute.

Hence we can conclude that The activity that would reduce the ion-pairing effect in his AICI₃ solution is to add some water to his solution

Learn more about ion pair effect : https://brainly.com/question/24100697

Answer:

Compare the solubility of silver chloride in each of the following aqueous solutions:

a. 0.10 M AgNO3 More soluble than in pure water.

b. 0.10 M NaCI Similar solubility as in pure water

c. 0.10 M KNO3 Less soluble than in pure water.

d. 0.10 M NH4CH3COO

Explanation:

This is based on common ion effect.

According to common ion effect, the solubility of a sparingly soluble salt decreases in a solution containing common ion to it.

The solubility of AgCl(s) is shown below:

[tex]AgCl(s) <=> Ag^{+}(aq)+Cl^-(aq)[/tex]

So, when it is placed in:

a. 0.10 M AgNO3

Due to common ion effect Ag+, its solubility is less in this solution than in pure water.

b. 0.10 M NaCI :

Due to common ion effect Cl-, its solubility is less in this solution than in pure water.

c. 0.10 M KNO3 :

In this solution there is no presence of common ion.

So, the solubility of AgCl in this solution is similar to that of pure water.

d. 0.10 M NH4CH3COO:

In this solution, AgCl forms a precipitate.

So, the solubility of AgCl is more in this solution compared to pure water.

Answer:

true

Explanation:

Answer:

true

Explanation:

Answer:

2–methylbutane

Explanation:

To name the compound given above, the following must be obtained:

1. Determine the longest continuous carbon chain. This gives the parent name of the compound.

2. Determine the substituent group attached.

3. Determine the position of the substituent group by giving it the lowest possible count..

4. Combine the above to obtain the name of the compound.

With the above information, we can name the compound as follow:

1. The longest continuous carbon chain of the compound is 4. Thus, the parent name is butane.

2. The substituent group attached to the compound is methyl (–CH₃).

3. The methyl (–CH₃) group is located at carbon 2 (i.e counting from the left side).

4. The name of the compound is:

2–methylbutane

Answer:

See Explanation

Explanation:

Rate of reaction refers to how quickly or slowly a reaction proceeds. The rate of reaction depends on certain factors.

Two among the factors that affect the rate of reaction are the concentration of reactants and the surface area of reactants.

The more the concentration of reactants, the faster the rate of reactants because there is a high possibility of collision between reactants. Also, the higher the surface area of reactants, the greater the rate of reaction.

In flour mills and coal mines where there is a large amount (concentration) of combustible materials and the particles are powdered (high surface area), there is a greater risk of explosion due to a high rate of reaction owing to a combination of the two factors discussed above.

Answer:

a. The longest chain is chosen incorrectly.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to firstly draw the structural formula of the 1,3-Dimethylbutane:

[tex]CH_3-CH_2-CH(CH3)-CH_2-CH_3[/tex]

Thus, we can see that the correct name should be 3-methylpentane since the longest chain was chosen incorrectly, as it must have five carbon atoms.

Regards!

Answer:

carbohydrates are simple sugars which can be broken down to form 3 sugars.

which are , (maltose) (fructose) & (glucose)

Explanation:

strong electrolyte- Nacl HCL NAOH

weak electrolyte- c12H22O, NH3

NaCl,HCl and NaOH  are strong electrolytes while ammonia is a weak electrolyte and sucrose is a non-electrolyte.

It is a solution which consists of ions which are electrically conducting as a result of movement of ions.Class of electrolytes include most soluble salts,acids and bases which are dissolved in a polar solvent.On dissolution, they separate into the constituent ions.

There are 3 classes according to the nature of substance which results upon dissolution:

1) Strong electrolytes- Substances which on dissolution in a medium dissociate completely are strong electrolytes. eg: NaCl,HCl

2) Weak electrolytes-  Substances which on dissolution in a medium dissociate partially are weak electrolytes. eg: NH₃

3)Non-electrolytes- Substances which do not dissociate on dissolution are non-electrolytes. eg: sucrose

Learn more about electrolytes,here:

https://brainly.com/question/8889716

#SPJ2

Answer:

A new fictitious element was discovered.

It is a metal named jolmium, J, and it has three valence electrons.

If it combines with iodine it forms jolmium iodide. Answer the following questions.

a.Is this compound ionic or covalent

b. What is the formula of Jolmium iodide?

c. What is the charge on the metal J in this compound?

d. Explain how you know that is the charge?

Explanation:

It is given the element jolmium J is a metal with three valence electrons.

Since metals are highly electropositive, they lose electrons easily and form cations (Ions with a positive charge).

[tex]J^{3+}[/tex] ion will be formed.

b) The formula of jolmium iodide is shown below:

[tex]J^{+3} I^{-1}\\The formula becomes:\\JI_{3}[/tex]

a) The compound is ionic in nature.

Since the compound formed between a metal atom and a nonmetal atom will take place by transfer of electrons.

Hence, it is ionic in nature.

c) The charge on the metal J in this compound is +3.

d) Given J has three valence electrons.

That means it can lose three electrons to form a bond.

So, its valency is three.

Answer:

it binds molecules like a chemical bond-breaking

Explanation:

Enzymes perform the critical task of lowering a reaction's activation energy—that is, the amount of energy that must be put in for the reaction to begin. Enzymes work by binding to reactant molecules and holding them in such a way that the chemical bond-breaking and bond-forming processes take place more readily.

Answer:

Its D Are in random motion

i hope it will help you if not soo sorry :)

Answer:

C H₄ + C Cl₄ = 2 (C H₂ Cl₂)

‎‎‎‎‎‎‎‎‎

Answer:

His results will be skewed because there was more water than stock solution. Which would cause the percentage solution to be less than 50% therefore the density would be less than the actual value.

Explanation:

The solution will have percentage less than that of 50%. Therefore the density would be less than the actual value.

Suppose there should be 50 mL of the solution, and he added 60 mL. So 10 mL of the solution is added more.

Suppose the mass of the solute is m.

Originally, the density is = [tex]$\frac{m}{50}$[/tex]     [tex]\left(\frac{\text{mass}}{\text{volume}}\right)[/tex]

Now after adding extra 10 mL , the density becomes [tex]$\frac{m}{60}$[/tex].

Therefore, [tex]$\frac{m}{50}>\frac{m}{60}$[/tex]

So the density decreases when we add more solution.

Answer:

soy....plant protein also is found in vegtables and grain products.

The protein that is derived from the plant is soyabean. Protein-rich foods have a rich source of amino acids. Amino acids are required by the body for different cellular activities.

Proteins are present in plant-based foods and animal-based foods. In nature, the plant-based foods that are rich in proteins are soybeans, beans etc. Animal products such as dairy products, milk, and cheese are rich sources of proteins.

Animal-based foods such as eggs, meat, and fish have a good amount of protein. The proteins are made up of amino acids. Peptide bonds connect each amino acid to the next.

Proteins are necessary for the body, as cells need amino acids for both structural and functional support. Not all cells of the body synthesise all amino acids. Some essential amino acids are required by the body and can be taken from external sources such as plants.

Hence, the plant-based protein is soyabean.

To learn more about the protein, here

https://brainly.com/question/17095120

#SPJ2.

The question is incomplete; the complete question may be the following:

1) Which of the following is a protein source of plant origin?

A)egg

B) Soyabean

C)cheese

D)Milk

Answer:

0.186 moles

Explanation:

In order to convert grams of PCl₅ into moles, we need to use its molar mass:

Then we proceed to calculate the number of moles:

In the given question Phosphorus pentachloride is used as a catalyst for certain chemical reaction. 38.7 g of [tex]\rm PCl_5[/tex], there are 0.186 moles of [tex]\rm PCl_5[/tex].

A catalyst is a substance that increases the rate of a chemical reaction by lowering the activation energy required for the reaction to occur.

To calculate the number of moles in 38.7 g of [tex]\rm PCl_5[/tex], we need to divide the given mass of [tex]\rm PCl_5[/tex] by its molar mass.

The molar mass of [tex]\rm PCl_5[/tex] can be calculated by adding the atomic masses of one phosphorus atom and five chlorine atoms:

Molar mass of  [tex]\rm PCl_5[/tex] = (1 x atomic mass of P) + (5 x atomic mass of Cl)

= (1 x 30.97 g/mol) + (5 x 35.45 g/mol)

= 208.22 g/mol

Now, we can calculate the number of moles of  [tex]\rm PCl_5[/tex]:

Number of moles = mass / molar mass

= 38.7 g / 208.22 g/mol

= 0.186 moles

Therefore, there are 0.186 moles of  [tex]\rm PCl_5[/tex] in 38.7 g of  [tex]\rm PCl_5[/tex].

Learn more about catalyst here:

https://brainly.com/question/24430084

#SPJ6

Explanation:

can u post a picture of the question ?

Answer:

In a combination redox reaction, two or more reactants, at least one of which is a(n) element, form a(n) compound. General Reaction: X + Y > Z

In a decomposition redox reaction, a(n) compound forms two or more products, at least one of which is a(n) element. General Reaction: Z>X+Y

In double-displacement (metathesis) reactions, such as precipitation and acid-base reactions, atoms (or ions) of two compounds exchange places; these reactions are not redox processes. General Reaction: AB+CD>AD+CB

In solution, single-displacement reactions occur when a(n) atom of one element displaces the atom of another. Since one of the reactants is a(n) element, all single-displacement reactions are redox processes. General Reaction: X+YZ>XY+Z

Explanation:

In a combination redox reaction, two or more reactants, at least one of which is a(n) element, form a(n) compound.

General Reaction: X + Y > Z

In the reaction scheme above, X combines with Y to give Z as a product.

In a decomposition redox reaction, a(n) compound forms two or more products, at least one of which is a(n) element.

General Reaction: Z>X+Y

In the reaction scheme above, Z decomposes to X and Y

In double-displacement (metathesis) reactions, such as precipitation and acid-base reactions, atoms (or ions) of two compounds exchange places; these reactions are not redox processes since there are no changes occurring in the oxidation number of the atoms (or ions) involved.

General Reaction: AB+CD>AD+CB

In the reaction scheme above, B and D exchange places in their respective compounds

In solution, single-displacement reactions occur when a(n) atom of one element displaces the atom of another. This type of reaction is due to the difference in the reactivities of the elements. The more reactive atom of one element displaces the least reactive atom of another element from its solution.

Since one of the reactants is a(n) element, all single-displacement reactions are redox processes.

General Reaction: X+YZ>XY+Z

In the reaction scheme above, X displaces Z from the compound YZ.

Answer:

yo its jess bregoli

your answer is given below

(◠‿◕)

An atomic mass unit is defined as a mass equal to one twelfth the mass of an atom of carbon-12. The mass of any isotope of any element is expressed in relation to the carbon-12 standard. For example, one atom of helium-4 has a mass of 4.0026 amu. An atom of sulfur-32 has a mass of 31.972 amu.

Answer:

The answer is cell wall

Explanation:

Because it is