Select all the correct locations on the image.
Select the areas that would receive snowfall because of the lake effect.
(The right answer for this question, I got it right on the edmentrum)

Answer:

moles CO₂ produced from combustion of 7.9 mole of C₅H₁₂ = 39.5 moles CO₂

Explanation:

              C₅H₁₂      +   8O₂      =>      6H₂O      +      5CO₂

Given:   7.9moles    excess            _____            ? moles

From Equation, 1 mole C₅H₁₂ =============>  5 moles CO₂

Given            7.9 mole C₅H₁₂  =============>         X

Solving for 'X' using ratio and proportion ...

1mole C₅H₁₂ / 7.9mole C₅H₁₂ =  5mole CO₂ / X

=> X = 5 mole CO₂ x  7.9mole C₅H₁₂ / 1mole C₅H₁₂  =  39.5 moles CO₂

≅ 40 moles CO₂ (2 sig. figs.)

Answer:

On the periodic table,periods are horizontal rows (across) the periodic table while groups are vertical columns (down) the table.We have groups in the periodic table like transition metals,rare earth,alkali metals ,alkaline earth metals halogens and noble gases

Answer:

Horizontal row call period and vertical column called group!

Physical,chemical, reaction procedure, shape,size, enthalpy of dissociation, bonding,non bonding, various things that segregated group and period....

Answer:

hey there

Explanation:

CN- (aq) + H+ (aq) → HCN(I)

The reactants are aqueous solutions:

NaCN(aq) and HBr(aq)

When you mix these compounds you make pure HCN (I)

The molecular equation is:

NaCN(aq) + HBr(aq) → NaBr(aq) + HCN(I)

When you dissociate the reactants, you have: Nat(aq) +CN¯(aq) + H*(aq) + Br−(aq) → Nat(aq) + ->

Br (aq) + HCN(I)

Sodium bromide, it is a salt, that can also be

dissociated in the solution

To make, the net ionic equation you remove the repeated ions

CN- (aq) + H+ (aq) → HCN(I)

If you like my answer please mark as brainliest

Explanation:

this is a single Replacement Reaction, so Na and Cl will form a bond.

Answer:

true

Explanation:

Answer:

true

Explanation:

Answer:

0.077 mole of ClF₃.

Explanation:

The balanced equation for the reaction is given below:

Cl₂ + 3F₂ —> 2ClF₃

From the balanced equation above,

3 moles of F₂ reacted to produce 2 moles of ClF₃.

Finally, we shall determine the number of mole of ClF₃ produced by the reaction of 0.115 mole of F₂. This can be obtained as follow:

From the balanced equation above,

3 moles of F₂ reacted to produce 2 moles of ClF₃.

Therefore, 0.115 mole of F₂ will react to to produce = (0.115 × 2)/3 = 0.077 mole of ClF₃.

Thus, 0.077 mole of ClF₃ was obtained from the reaction.

Answer:

it binds molecules like a chemical bond-breaking

Explanation:

Enzymes perform the critical task of lowering a reaction's activation energy—that is, the amount of energy that must be put in for the reaction to begin. Enzymes work by binding to reactant molecules and holding them in such a way that the chemical bond-breaking and bond-forming processes take place more readily.

Answer:

Boiled a added acidic solution for Lowe's home improvement for car insurance cost the Africa map of the soul

Answer:

carbohydrates are simple sugars which can be broken down to form 3 sugars.

which are , (maltose) (fructose) & (glucose)

Answer:

%C = 60.9%; %H = 15.4%; %N = 23.7%

Explanation:

Step 1: Given data

Step 2: Calculate the percent composition of this compound

To calculate the percent by mass of any element (E), we will use the following expression.

%E = mE/m × 100%

%C = 7.34 g/12.04 g × 100% = 60.9%

%H = 1.85 g/12.04 g × 100% = 15.4%

%N = 2.85 g/12.04 g × 100% = 23.7%

Answer:

Add some water to his solution

Explanation:

Ion pair effect refers to strong electrostatic interaction between oppositely charged ions in solution. Such strong interaction affects solute- solvent interaction when an ionic substance is dissolved in water.

High solute concentration may lead to ion-pair effect. Hence, the ion pair effect may be minimized by adding more water (decreasing the concentration of the solution).

To reduce the ion- pair effect, Andy needs to add some water to his solution (dilution).

The activity that would reduce the ion-pairing effect in his AICI₃ solution is : ( B ) add some water to his solution

Ion pair effect is a strong electrostatic interaction seen between ions with opposite charges, when an ionic substance is been dissolved in a solvent such as water this effect will affect the dissolution of the substance.

High concentration of the solute in a solution also leads to the ion pair effect therefore for Andy to reduce the ion-pairing effect in his solution he has to add more water to reduce the concentration of the solute.

Hence we can conclude that The activity that would reduce the ion-pairing effect in his AICI₃ solution is to add some water to his solution

Learn more about ion pair effect : https://brainly.com/question/24100697

Answer:

2–methylbutane

Explanation:

To name the compound given above, the following must be obtained:

1. Determine the longest continuous carbon chain. This gives the parent name of the compound.

2. Determine the substituent group attached.

3. Determine the position of the substituent group by giving it the lowest possible count..

4. Combine the above to obtain the name of the compound.

With the above information, we can name the compound as follow:

1. The longest continuous carbon chain of the compound is 4. Thus, the parent name is butane.

2. The substituent group attached to the compound is methyl (–CH₃).

3. The methyl (–CH₃) group is located at carbon 2 (i.e counting from the left side).

4. The name of the compound is:

2–methylbutane

Answer:

A new fictitious element was discovered.

It is a metal named jolmium, J, and it has three valence electrons.

If it combines with iodine it forms jolmium iodide. Answer the following questions.

a.Is this compound ionic or covalent

b. What is the formula of Jolmium iodide?

c. What is the charge on the metal J in this compound?

d. Explain how you know that is the charge?

Explanation:

It is given the element jolmium J is a metal with three valence electrons.

Since metals are highly electropositive, they lose electrons easily and form cations (Ions with a positive charge).

[tex]J^{3+}[/tex] ion will be formed.

b) The formula of jolmium iodide is shown below:

[tex]J^{+3} I^{-1}\\The formula becomes:\\JI_{3}[/tex]

a) The compound is ionic in nature.

Since the compound formed between a metal atom and a nonmetal atom will take place by transfer of electrons.

Hence, it is ionic in nature.

c) The charge on the metal J in this compound is +3.

d) Given J has three valence electrons.

That means it can lose three electrons to form a bond.

So, its valency is three.

Answer:

Hence, option B is correct. 1 and 2

Explanation:

NH 4 Cl is a weak base-strong acid salt.

NaCN is a salt of a strong base (NaOH) and weak acid (HCN).In water,

1. NH 4 Cl produces acidic solution

2. KHSO 4 produces acidic solution

because the neutral salt of strong base KOH and strong acid H 2 SO 4 is K 2 SO 4

3. NaCN produces basic solution

4. KNO

3 produces neutral solution

I think this is right but I hope its help ,ur welcome ♥️♥️

Answer:

H+

Explanation:

I took the test :)

Answer:

pH = 1.76

Explanation:

The mixture of formate and formic acid produce a buffer. The pH of the buffer is obtained using H-H equation as follows:

pH = pKa + log [A-] / [HA]

Where pH is the pH of the buffer:

pKa = -log Ka = 3.74

[A-] is molar concentration of conjugate base (Formate) = 0.015M

[HA] is molar concentration of weak acid (Formic acid) = 1.45M - 0.015M = 1.435M

Replacing:

pH = 3.74 + log [0.015M] / [1.435M]

Answer:

C H₄ + C Cl₄ = 2 (C H₂ Cl₂)

‎‎‎‎‎‎‎‎‎

I think it's 9 ................'

Answer:

See explanation

Explanation:

We define the formal charge on an atom in a molecule as the charge it carries assuming that electrons in all chemical bonds of the molecule were shared equally between atoms irrespective of the electronegativity of each atom.

The formula for calculating the formal charge on an atom in a molecule is;

Formal Charge = [number of valence electrons on neutral atom] – [(number of lone electron pairs) + (½ number of bonding electrons)] ·

The formal charge on the two nitrogen atoms in diazomethane is obtained as follows;

Middle nitrogen atom = 5 – 8/2 – 0 = +1

Last nitrogen atom = 5 – 4/2 – 4 = –1

The Lewis structure of the molecule is shown in the image attached.

Answer:

The problem of energy exchange between waves and particles, which leads to energization of the latter, in an unstable plasma typical of the radiation belts. The ongoing Van Allen Probes space mission brought this problem among the most discussed in space physics. A free energy which is present in an unstable plasma provides the indispensable condition for energy transfer from lower energy particles to higher-energy particles via resonant wave-particle interaction. This process is studied in detail by the example of electron interactions with whistler mode wave packets originated from lightning-induced emission. We emphasize that in an unstable plasma, the energy source for electron energization is the energy of other particles, rather than the wave energy as is often assumed. The way by which the energy is transferred from lower energy to higher-energy particles includes two processes that operate concurrently, in the same space-time domain, or sequentially, in different space-time domains, in which a given wave packet is located. In the first process, one group of resonant particles gives the energy to the wave. The second process consists in wave absorption by another group of resonant particles, whose energy therefore increases. We argue that this mechanism represents an efficient means of electron energization in the radiation belts.

Explanation:

Fun facts:

In the process of energy transfer between two groups of particles both processes operate simultaneously, and if the lower energy part of plasma distribution gives energy to the wave while the higher‐energy part absorbs the wave enrgy, then the wave‐mediated energy transfer from lower energy particles to higher‐energy ...

Explanation:

Sublimation is the conversion between the solid and the gaseous phases of matter, with no intermediate liquid stage

Explanation:

the answer is in the image above

Answer:

a. The longest chain is chosen incorrectly.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to firstly draw the structural formula of the 1,3-Dimethylbutane:

[tex]CH_3-CH_2-CH(CH3)-CH_2-CH_3[/tex]

Thus, we can see that the correct name should be 3-methylpentane since the longest chain was chosen incorrectly, as it must have five carbon atoms.

Regards!

Explanation:

strong electrolyte- Nacl HCL NAOH

weak electrolyte- c12H22O, NH3

NaCl,HCl and NaOH  are strong electrolytes while ammonia is a weak electrolyte and sucrose is a non-electrolyte.

It is a solution which consists of ions which are electrically conducting as a result of movement of ions.Class of electrolytes include most soluble salts,acids and bases which are dissolved in a polar solvent.On dissolution, they separate into the constituent ions.

There are 3 classes according to the nature of substance which results upon dissolution:

1) Strong electrolytes- Substances which on dissolution in a medium dissociate completely are strong electrolytes. eg: NaCl,HCl

2) Weak electrolytes-  Substances which on dissolution in a medium dissociate partially are weak electrolytes. eg: NH₃

3)Non-electrolytes- Substances which do not dissociate on dissolution are non-electrolytes. eg: sucrose

Learn more about electrolytes,here:

https://brainly.com/question/8889716

#SPJ2

Answer:

[tex]X=75\%[/tex]

Explanation:

From the question we are told that:

Concentration [tex]C_1=17.50ppb[/tex]

Volume [tex]v=9mL[/tex]

Spike Volume [tex]V_s=1.00mL[/tex]

spike Conc [tex]C_2=2.29 ppb[/tex]

Analysis Conc [tex]C_s=15.93 ppb[/tex]

Generally the equation for  percent recovery is mathematically given by

 [tex]X=\frac{C_s'-C_1'}{C_2'}[/tex]

Where

Concentration of spiked sample C_s'

 [tex]C_s'=C_s*(v+v_s)[/tex]

 [tex]C_s'=15.92*(9+1)[/tex]

 [tex]C_2=159.2[/tex]

Concentration of unspiked sample C_1'

 [tex]C_1'=17.50*9mL[/tex]

 [tex]C_1'=157.5[/tex]

Concentration of spike sample C_2'

 [tex]C_2=2.29*1[/tex]

 [tex]C_2=2.29[/tex]

Therefore

 [tex]X=\frac{159.2-157.5}{2.29}[/tex]

 [tex]X=75\%[/tex]

Answer:

See explanation and images attached

Explanation:

The first image shows the structure of hydrogen peroxide. It does not exist as resonance structures. The structure and properties of the molecule can wholly be explained on the basis of a single Lewis structure.

However, the structure of the bicarbonate ion in sodium bicarbonate can not be completely described by a single Lewis structure. Hence, two resonance structures are shown for the bicarbonate ion. In each case, Na^+ is the counter ion.

Answer:

tge answer is a

Explanation:

I'm smart like that

Answer:

It is A, The daughter product has the wrong atomic number

Explanation:

Have trust, please i beg of you.

:) thank me later, love ya

The daughter's product has the wrong atomic number. Hence, option A is correct.

Nuclear equations represent the reactants and products in radioactive decay, nuclear fission, or nuclear fusion.

Beta decay - A common mode of radioactive decay in which a nucleus emits beta particles. The daughter nucleus will have a higher atomic number than the original nucleus.

Hence, the daughter's product has the wrong atomic number.

Learn more about nuclear equation here:

https://brainly.com/question/20660529

#SPJ2

Answer:

The correct answer is - 5L.

Explanation:

From the ideal gas equation -

pv=nRT

p = pressure

v =volume

Here nRT is constant so

P would be inversely proportioned to v

So, p1/p2 = v2/v1

Putting values:

2/4(2) = v2/20 (p2 = 4 times of P1)

2/8 = v2/20

V2 = 5

Thus, the correct volume at new pressure would be - 5 L.

Answer:

Its D Are in random motion

i hope it will help you if not soo sorry :)

Answer:

a. 3-brumo - 3-methylhexane

Explanation:

Alkyl Halides can undergo substitution reactions. Nucleophiles are electron rich species and has negative charge while Electrophiles are electron deficient species which carry positive charge. Alkyl halide which have polar carbon atom are electrophiles.