Sgr A has a diameter of about 27.3 million miles; that's roughly the same distance from Mercury to:

Venus

Jupiter

Earth

The Sun

A function [tex]P(t) = 170.(1.30)^t[/tex]  that gives the deer population P(t) on the reservation t years from now

We were told there were 170 stags on reservation. The number of deer is increasing at a rate of 30% per year.

We could see the deer population grow exponentially since each year there will be 30% more than last year.

Since we know that an exponential growth function is in form:

[tex]f(x) = a*(1+r)^x[/tex]

where a= initial value, r= growth rate in decimal form.

It is given that a= 170 and r= 30%.    

Let us convert our given growth rate in decimal form.

[tex]30 percent = \frac{30}{100} = 0.30[/tex]

Upon substituting our given values in exponential function form we will get,

    [tex]P(t) = 170.(1+0.30)^t[/tex]

⇒ [tex]P(t)= 170.(1.30)^t[/tex]

Therefore, the function [tex]P(t) = 170.(1.30)^t[/tex] will give the deer population P(t) on the reservation t years from now.

Complete Question:

There are 170 deer on a reservation. The deer population is increasing at a rate of 30% per year. Write a function that gives the deer population P(t) on the reservation t years from now.

Learn more about Function:

https://brainly.com/question/12431044

#SPJ4

Answer:

Step-by-step explanation:

The value of z that should be used when making a 93% confidence interval for p is Z=1.81 that is option D.

The z score is a measure of how many standard deviations a raw score is below or above the population mean. It will be positive if the value is more than the mean and negative if it is less than the mean. It is often referred to as the standard score. It represents the number of standard deviations an entity has from the mean.

To utilise a z-score, both the mean and the population standard deviation must be known. The z score calculates the likelihood of a score occuring within a standard normal distribution. It also allows us to compare scores from various samples. A table for the values of, representing the values of the cumulative distribution function of the normal distribution, is known as a

At 93% confidence, the significance level is,

ɑ= 1-0.93

ɑ= 0.07

Divide alpha by 2,

ɑ/2= 0.07/2= 0.035

Now, from the ‘normal probability’ table, the z value corresponding to the inverse probability of 0.035 is 1.81.

As a result, the z value is 1.81 at 93% confidence level.

z= 1.81

The value for z score is 1.81

Learn more about Confidence interval :

https://brainly.com/question/27325376

#SPJ4

Simplifying the algebraic expression ab + 3a² - 7a + ab + a² = a(4a + 2b - 7)

An algebraic expression is a mathematical expression in which letters are used to represent the variables.

Since we have the algebraic expression ab + 3a² - 7a + ab + a², and we want to simplify it. We proceed as follows

ab + 3a² - 7a + ab + a²

First, we collect the like terms together

ab + 3a² - 7a + ab + a² = 3a² + a²- 7a + ab + ab

Adding the similar terms together, we have

= 3a² + a²- 7a + ab + ab

= 4a²- 7a + 2ab

=  4a²- 7a + 2ab

Factorizing out a, we have that

= a(4a - 7 + 2b)

= a(4a + 2b - 7)

So, ab + 3a² - 7a + ab + a² = a(4a + 2b - 7)

Learn more about algebraic expression here:

https://brainly.com/question/28345080

#SPJ1

If Idil drove 12 miles in 1/5an hour on average, then she drove at an average speed of 60 miles per hour.

To calculate the average speed of Idil's car in miles per hour, we need to divide the distance she drove (12 miles) by the time it took her to drive that distance (1/5 hour):

Average speed = distance ÷ time

Average speed = 12 miles ÷ (1/5) hour

To divide by a fraction, we can multiply by its reciprocal, so:

Average speed = 12 miles × 5/1 hour

Average speed = 60 miles per hour

Therefore, Idil drove at an average speed of 60 miles per hour.

Learn more about average speed here

brainly.com/question/7403404

#SPJ4

Answer:

Proofs attached to answer

Step-by-step explanation:

Proofs attached to answer

Answer:

24 cm (to nearest cm)

Step-by-step explanation:

XLV = extra large tin volume (cm³)

LV = large tin volume (cm³)

XLR = extre large tin radius (cm)

LR = large tin radius (cm) = 20

XLV = 1.75 × LV

Since the tins are geometrically similar cylinders, we can infer that the volumes and radii of the 2 tins are related;

We know the relationship between the volume of the two tins, i.e. the XL tin is 75% greater in volume than the L tin;

This means the volumetric scale factor or multiplier is ×1.75;

Subsequently, we know:

XLV = 1.75 × LV

Similarly, there is a relationship between the radii of the tins;

The relationship is, however, slightly different;

[tex]XLR = (\sqrt[3]{1.75}) \times LR[/tex]

We need to take the cube root of the volumetric scale factor, reason being, the radius is a linear dimension unlike volume;

Easy way to figure this is radius is in cm, volume is in cm³;

So:

XLR = 1.205... × LR

XLR = 1.205... × 20

XLR = 24.101... --> 24 cm (to nearest cm)

Answer:

50

Step-by-step explanation:

Let the number = x.

20% of the number is 20% of x = 0.2x.

Since the number exceeds 20% of itself by 40, then teh number minus 20% of itself is 40.  

x - 0.2x = 40

0.8x = 40

x = 40/0.8

x = 50

Answer:

y = -3/8x + 3

Step-by-step explanation:

The slope intercept form is y = mx + b

Our equation is 3x + 8y = 24

3x + 8y = 24

8y = -3x + 24

y = -3/8x + 3

So, the answer is y = -3/8x + 3

Total seats in plane: 186

108+64+14

5/7 of 14 is: 10

14÷7= 2

2x5= 10

5/16 of 64 is: 20

64÷16=4

5×4= 20

5/9 of 108 is: 60

108÷9= 12

12x5= 60

60+20+10=90

90/186 of seats are being used

simplified: 15/31

No

Question: The heights of adult men can be approximated as normal, with a mean of 70 and a standard deviation of 3, the probability that a man is shorter than 65 inches is approximately 0.0475 or 4.75%.

Let X be the height of an adult man, which follows a normal distribution with mean μ = 70 and standard deviation σ = 3. Then, we need to find the probability that a man is shorter than some height, say x₀. We can write this probability as P(X < x₀).To find P(X < x₀), we need to standardize the random variable X by subtracting the mean and dividing by the standard deviation. This yields a new random variable Z with a standard normal distribution. Mathematically, we can write this transformation as:Z = (X - μ) / σwhere Z is the standard normal variable.

Now, we can find P(X < x₀) as:P(X < x₀) = P((X - μ) / σ < (x₀ - μ) / σ) = P(Z < (x₀ - μ) / σ)Here, we use the fact that the probability of a standard normal variable being less than some value z is denoted as P(Z < z), which is available in standard normal tables.

Therefore, to find the probability that a man is shorter than some height x₀, we need to standardize the height x₀ using the mean μ = 70 and the standard deviation σ = 3, and then look up the corresponding probability from the standard normal table.In other words, the probability that a man is shorter than x₀ can be expressed as:P(X < x₀) = P(Z < (x₀ - 70) / 3)We can now use standard normal tables or software to find the probability P(Z < z) for any value z.

For example, if x₀ = 65 (i.e., we want to find the probability that a man is shorter than 65 inches), then we have:z = (65 - 70) / 3 = -1.67Using a standard normal table, we can find that P(Z < -1.67) = 0.0475. Therefore, the probability that a man is shorter than 65 inches is approximately 0.0475 or 4.75%. Thus, P(X < 65) = 0.0475 or 4.75%. Therefore, the probability that a man is shorter than 65 inches is approximately 0.0475 or 4.75%.

See more about normal distribution at: https://brainly.com/question/4079902

#SPJ11

The perimeter of the square is 256 m.

Area is a measure of the amount of two-dimensional space enclosed by a closed figure or shape. It is usually measured in square units, such as square meters, square feet, or square centimeters.

A square is a regular quadrilateral with four equal sides and four right angles. It is a special case of a rectangle and a rhombus, and its properties are a combination of both.

In the given question,

We can start by using the formula for the area of a square, which is:

a = s²

where a is the area and s is the length of one side of the square.

If the area of the square is 64 m², then we have:

64 = s²

Solving for s, we get:

s = √64 = 8 m

Now, we can use the formula for the perimeter of a square in terms of its area:

P = 4a²

Substituting a = 64, we get:

P = 4(64) = 256 m

Therefore, the perimeter of the square is 256 m.

To know more about Area of square, visit:

https://brainly.com/question/1658516

#SPJ1

The answer is: A) r=0.04; R=0.96 B) 8% C) 92.16%.

The Hardy-Weinberg equilibrium is a method for determining the frequency of certain genetic traits in a population. The following are the frequencies of the red hair (r) and non-red hair (R) alleles in the Norwegian population, according to the question: A) The total frequency of alleles is 1. If red hair (r) is found in approximately 4% of the people in Norway, then the frequency of the R allele must be 0.96 or 96%. R = 0.96 r = 0.04 B) The frequency of hetero zygotes in a population can be determined by multiplying the frequency of the R allele by the frequency of the r allele and then multiplying that number by 2.

Heterogeneous genotype = 2pq Here, p represents the frequency of the R allele, and q represents the frequency of the r allele. p = R = 0.96 q = r = 0.04 Therefore, 2pq = 2(0.96 x 0.04) = 0.077, or approximately 8%. C) In order for a child to have red hair, both parents must carry the r allele. If both parents are homozygous for the R allele, there is no chance that their child will have red hair. This means that the proportion of matings that cannot result in a child with red hair is (0.96 x 0.96) = 0.9216 or 92.16%.

Therefore, the answer is: A) r=0.04; R=0.96 B) 8% C) 92.16%.

Learn more about Heterogeneous

brainly.com/question/30583932

#SPJ11

The successfullly completed the proof of the cancellation property of vector addition.

Complete proof of the cancellation property of vector addition:Let u, v, and w be vectors in a vector space V such that u + w = v + w. We have to show that u = v.  We know that the cancellation property of vector addition states that for all vectors u, v, and w in a vector space V, if u + w = v + w, then u = v.So, u + w = v + w can be written as, u + w - w = v + w - w, applying subtraction on both sides.u + 0 = v + 0 (as - w + w = 0)0 is an additive identity, so it can be dropped off.u = v, which is the desired result.The statement "u + w = v + w" was given, and we have shown that it implies that "u = v". Hence, we have successfully completed the proof of the cancellation property of vector addition.

Learn more about Successfully

brainly.com/question/28826521

#SPJ11

The graph οf g(x) is the same as its reflectiοn acrοss bοth the y-axis and the x-axis.

What is a graph?

A graph is a structure amοunting tο a set οf οbjects in which sοme pairs οf the οbjects are in sοme sense "related". The οbjects cοrrespοnd tο mathematical abstractiοns called vertices and each οf the related pairs οf vertices is called an edge.

Tο reflect a functiοn acrοss the y-axis, we replace x with -x in the functiοn. This gives us:

f(-x) = 1/4(8) = 2

This functiοn represents the reflectiοn οf f(x) acrοss the y-axis. Tο reflect this functiοn acrοss the x-axis, we replace f(-x) with -f(-x). This gives us:

-f(-x) = -2

Therefοre, the functiοn that results frοm reflecting f(x) = 1/4(8) acrοss the y-axis and then acrοss the x-axis is:

g(x) = -2

This is a hοrizοntal line that intersects the y-axis at -2. The graph οf g(x) is a straight line parallel tο the x-axis, and it dοes nοt change when reflected acrοss the y-axis οr x-axis. Sο, the graph οf g(x) is the same as its reflectiοn acrοss bοth the y-axis and the x-axis.

Learn mοre abοut graphs οn:

https://brainly.com/question/17267403

#SPJ1

The equation you would use to properly calculate the dollar cost of entering the park and enjoying rides is Total Cost = Entrance Fee + (Number of Rides x Ride Fee).

In this case, Total Cost is the cost of entering the park and enjoying rides, Entrance Fee is the fee for entering the park, Number of Rides is the number of rides you will be taking, and Ride Fee is the fee charged for each ride.

Thus, plugging in the given values, the equation becomes  Total Cost = Entrance Fee + (Number of Rides x Ride Fee).

Therefore, if the Entrance Fee is $ and each ride costs an additional $ , the Total Cost of entering the park and enjoying rides is $ .

for such more questions on calculations

https://brainly.com/question/17145398

#SPJ11

Answer: The interest and amount to be paid at the end of 3 years is Rs.8700

Step-by-step explanation:

let P ,R, T be the Principle amount , Rate of interest and Time

             P= 6000rs

             R= 15%

             T=3 years

                      =6000rs×15r×3t÷100

                       =2700rs

                                                             = 8700rs

a) The new principal (principal + capitalized interest) when Rich begins making loan payments will be $9,425.10.

b) The total interest that Rich will pay over the life of the loan is $4,914.20.

Simple interest (S.I.) is a method of calculating the amount of interest on a specific principal amount at a certain rate. For example, when one takes out a loan of Rs. 5000, at the rate of 10 p.A. Two years The person's two years of interest will be the money borrowed by SI.

Interest on student loans is based on simple interest. If the student does not pay interest, the only interest capitalized is that for the period during which the payment was not made.

Some students choose to pay interest during the non-repayment period to reduce the capitalized interest and principal during the repayment period.

Capitalization refers to the addition of interest to the principal amount.

Period of student loan = 10 years

The amount of the federal unsubsidized student loan = $7,900

Interest rate = 4.29%

Capitalized interest during the non-payment time = $1,525.10 ($7,900 x 4.29% x 4.5)

New principal when Rich begins making loan payments = $9,425.10 ($7,900 + $1,525.10)

Total interest for loan = $4,914.20 ($7,900 x 4.29% x 14.5)

Complete Question:

Rich is attending a 4-year college. As a freshman, he was approved for a 10-year, federal unsubsidized student loan in the amount of $7,900 at 4.29%. He knows he

has the option of beginning repayment of the loan in 4.5 years. He also knows that during this non-payment time, interest will accrue at 4.29%.

If Rich decides to make no payments during the 4.5 years, the interest will be capitalized at the end of that period.

a. What will the new principal be when he begins making loan payments?

b. How much interest will he pay over the life of the loan?

Learn more about Payment:

https://brainly.com/question/30296905

#SPJ4

Answer: $318/mo

Step-by-step explanation:

First, we get the remainder, which is the difference between $9, 632 and $2,000. That gives us $7, 632.

Then, since we know she will pay in 24 months, we assume she pays the same amount each month and divide $7, 632 by 24 = $318/mo

11.87 m² metal sheet would be needed to make the base area of tank.

Volume of cylinder, determines how much material it can carry, is determined by the cylinder's volume. A cylinder is a three-dimensional structure having two parallel, identical bases that are congruent.

It is given that capacity of a closed cylindrical vessel of height 2 m is 3080 liters

Let us assume that Radius of cylinder = r

Then Volume of cylinder = π ×r² ×h

= 2π ×r²× m³

1 m³ = 1000 liters

= 2000 π r²  liters

Volume of tank = Capacity

2000 π r² = 3080

=> 2000 × (22/7) × r² = 3080

=> r² = 49/100

=> r = 7/10 m

=> r = 0.7 m

Base Area of tank = TSA = 2πrh + 2πr²

= 2×(22/7)(0.7)×2 + 2×(22/7)×(0.7)²

= 3.0772 +8.792

= 111.87 m²

Hence, 11.87 m² metal sheet would be needed to make it.

To know more about congruent, visit:

https://brainly.com/question/12413243

#SPJ1

Answer:

just a Condit

Step-by-step explanation:

hfjgygdhydv htfhdfjyfdg hyfjkg

Answer:

If two angles are supplementary, then the sum of their measures is 180°.

Answer:

Y intercept is (0,2) Answer D.

Step-by-step explanation:

I included a graph for equation y=2/3 x + 2.

Answer: 4 is the average rate of change

Step-by-step explanation:

The equation to find the average rate of change is:

So f(2)= 11 and f(5)=23 then you plug these numbers in:

[tex]\frac{23-11}{5-2}[/tex] = [tex]\frac{12}{3}[/tex] = 4

Answer:

D

Step-by-step explanation:

First, yes, it is a function. Functions are defined as having one output per input, and given a number on this graph, we can find only one output.

Domain is the range of x-values in a graph. The domain here is from [tex]-\pi[/tex] to [tex]\pi[/tex].

Range is the range of y-values in a graph. The range here is from -1 to 1.

This graph has three intercepts at [tex](-\pi ,0)(0,0)(\pi ,0)[/tex].

Symmetry: This graph has rotational symmetry, meaning it can be rotated about a point to map onto itself. Here, we can rotate it 180 degrees about the origin to map onto itself.

Although I can't see the final two points for answer D, answer A is similar but the symmetry portion is wrong, leading me to believe that it must be D.

Let me know if this helped by hitting thanks or brainliest! If not, comment below and I'll get back to you ASAP.

Answer:

Step-by-step explanation:

348.55

The value of the unknown lengths in these similar triangles is FH is 6.67 units and EG is 27 units.

A triangle is a polygon with three sides and three angles. It is a two-dimensional shape that is commonly studied in mathematics, geometry, and other fields. The sum of the angles in a triangle is always 180 degrees, and the lengths of the sides can vary. Triangles can be classified based on the lengths of their sides and the measures of their angles. Common types of triangles include equilateral, isosceles, scalene, acute, right, and obtuse triangles. Triangles have many important properties and are used in various applications, including construction, engineering, and physics.

Here,

1. Let x be the length of FH. We have:

AB/EF = BD/FH

12/8 = 10/x

Cross-multiplying, we get:

12x = 80

x = 80/12

x ≈ 6.67

Therefore, FH ≈ 6.67.

2. Let y be the length of EG. We have:

AC/BD = FH/EG

15/9 = 5/y

Cross-multiplying, we get:

5y = 135

y = 135/5

y ≈ 27

Therefore, EG ≈ 27.

To know more about triangle,

https://brainly.com/question/28600396

#SPJ1

the closest estimate for the experimental probability of rolling a 4 is 0.12 or 12%.

Experimental probability is the probability of an event happening based on the results of an experiment or trial. It is also known as empirical probability.

The experimental probability of an event happening is the ratio of the number of times the event occurred to the total number of trials or attempts.

In this case, the event is rolling a 4 on the cube, and the total number of trials is 500.

So, the experimental probability of rolling a 4 can be calculated as:

experimental probability = number of times 4 landed face-up / total number of trials

experimental probability = 58/500

experimental probability = 0.116 or approximately 0.12 (rounded to two decimal places)

Therefore, the closest estimate for the experimental probability of rolling a 4 is approximately 0.12 or 12%.

To know more about ratio, visit:

https://brainly.com/question/13419413

#SPJ1

The analysis of the data to obtain the confidence interval of the difference in the means indicates;

99% confidence interval for [tex]\bar x[/tex]₁ - [tex]\bar x[/tex]₂

The correct options are;

Name of Procedure

Random

10%

Normal/Large Sample

99% CI = (-0.302, 2.301)

Conclude;

We are 99% confident that the interval give in the previous step captures -0.301 to 2.301 = the true difference in mean heart height for all subject like these who listen to love songs versus classical music.

A confidence interval is a range of value that is likely to contain the true value of a population parameter with a certain degree of confidence.

The two-sample t-test can be used to construct the 99% confidence interval as follows;

([tex]\bar x[/tex]₂ - [tex]\bar x[/tex]₁) ± t(α/2, df) × √(s₁²/n₁ + s₂²/n₂)

Where;

[tex]\bar x[/tex]₂ and [tex]\bar x[/tex]₁ = The sample means of the love song and classical music groups

s₁, and s₂ = The sample standard deviations

n₁ and n₂ = The sample sizes

df = The degrees of freedom

t(α/2, df) = The value from the t-distribution table with a significance level of 0.01 and df = n₁ + n₂ - 2

The data indicates;

n₁ = n₂ = 15

[tex]\bar x[/tex]₁ = 5.07, s₁ = 1.63

[tex]\bar x[/tex]₂ = 4.07, s₂ = 1.13

Therefore, we get;

([tex]\bar x[/tex]₂ - [tex]\bar x[/tex]₁) ± t(α/2, df) × √(s₁²/n₁ + s₂²/n₂)

= (5.07 - 4.07) ± t(0.005, 28) × √(1.62²/15 + 1.13²/15)

= 1 ± 2.763 × 0.469

= 1 ± 1.301

The 99% confidence interval for the difference in the true mean heart for subjects who listen to a love song versus classical music is; (-0.301, 2.301).

The correct statement is; 99% confidence interval for [tex]\bar x[/tex]₁ - [tex]\bar x[/tex]₂

The correct statements, placed in the box are;

Name of Procedure;

Two sample interval for [tex]\bar x[/tex]₁ - [tex]\bar x[/tex]₂

Random

The volunteers are randomly selected

The random condition is met

We have a random sample of 15 subjects who listen to a love song

We have a random sample of 15 subjects who listen to classical music

10%

The 10% condition is met

15 < 10% of all subjects like these who listen to love songs

15 < 10% of all subjects like these  who listen to classical music

Normal/Large Sample

The Normal/Large condition is met

The stemplot of the classical music sample data shows no strong skewness or outliers

The stemplot of the love song music sample data shows no strong skewness or outliers

Therefore;

99% CI = (-0.301, 2.301)

Conclude;

We are 99% confident that the interval given in the previous step captures -0.301 to 2.301 = the true difference in mean heart height for all subject like these who listen to love songs versus classical music.

Learn more on the confidence intervals of population parameters here: https://brainly.com/question/29911447

#SPJ1

(a) the tare οf the rice is 800 grams. and (b) the tare percentage οf the rice is 3.10%.

A rate, number, οr amοunt in each hundred

a. The tare οf the rice is the weight οf the packaging οr cοntainer used tο hοld the rice. It can be calculated by subtracting the net weight οf the rice frοm the grοss weight οf the bag:

Tare weight = Grοss weight - Net weight

Tare weight = 25.8 Kg - 25 Kg

Tare weight = 0.8 Kg

Tο cοnvert this tο grams, we can multiply by 1000:

Tare weight = 0.8 Kg × 1000

Tare weight = 800 grams

Therefοre, the tare οf the rice is 800 grams.

b. The tare percentage οf the rice is the percentage οf the grοss weight that is accοunted fοr by the tare weight. It can be calculated using the fοrmula:

Tare percentage = (Tare weight / Grοss weight) × 100%

Substituting the values we fοund earlier, we get:

Tare percentage = (800 g / 25.8 Kg) × 100%

Tare percentage = 3.10%

Therefοre, the tare percentage οf the rice is 3.10%.

To learn more about Percentage, click on the link:

https://brainly.com/question/24877689

#SPJ1