Significant number of
A) 2348
B) 7.0001
C) 0.0023
D)24,500
E) 0.1060

Answer:

because.......

...........

.........

Answer:

Suppose that you add 29.2 g of an unknown molecular compound to 0.250 kg of benzene, which has a K f of 5.12 oC/m. With the added solute, you find that there is a freezing point depression of 2.78 oC compared to pure benzene. What is the molar mass (in g/mol) of the unknown compound

Explanation:

The mass of nonvolatile solute added is ---- 29.2g

The mass of solvent benzene is ---- 0.250kg = 250g

The Kf value of benzene is ---- 5.12^oC/m.

Depression in the freezing point of the solution is --- 2.78^oC.

What is the molar mass of the unknown solute?

[tex]The depression in freezing point = Kf * molality of the solution\\molality of the solution = \frac{mass of solute}{molar mass of solute}*\frac{1}{mass of solvent in kg}[/tex]

Substitute the given values in this formula to get the molar mass of unknown solvent:

[tex]molality=\frac{29.2g}{M} * \frac{1}{0.250kg} \\depression in freezing point:\\2.78^oC=5.12^oC/m * \frac{29.2g}{M} * \frac{1}{0.250kg} \\\\=>M=5.12^oC/m * \frac{29.2g}{2.78^oC} * \frac{1}{0.250g} \\\\\\=>M=215.1g/mol[/tex]

Hence, the molar mass of unknown solute is --- 215g/mol.

Answer:

How many 250 mg tablets of metronidazole are needed to make 150 mL of suspension containing

100 mg/mL?

a. 25

b. 30

c.50

d. 60

Explanation:

if mali po I'm so sorry

About 60 tablets of 250 mg tablets of metronidazole are needed to make 150 mL of suspension containing 100 mg/mL.

To calculate the number of tablets needed, we can use the following formula:

Number of tablets = (Desired total mass of metronidazole) / (Mass of one tablet)

The desired total mass of metronidazole in the suspension is given as 100 mg/mL × 150 mL = 15000 mg.

Since each tablet contains 250 mg of metronidazole, we can calculate the number of tablets as:

Number of tablets = 15000 mg / 250 mg = 60 tablets

Therefore, the correct answer is d. 60 tablets.

Learn more about metronidazole here:

https://brainly.com/question/31711077

#SPJ 2

Answer: The pH of the resulting solution will be 3.001

Explanation:

Molarity is calculated by using the equation:

[tex]\text{Molarity}=\frac{\text{Moles}}{\text{Volume}}[/tex]          ......(1)

We are given:

Moles of NaOH = 0.0224 moles

Molarity of nitrous acid = 0.475 M

Molarity of sodium nitrite = 0.302 M

Volume of solution = 150 mL = 0.150 L          (Conversion factor: 1 L = 1000 mL)

Putting values in equation 1, we get:

[tex]\text{Moles of nitrous acid}=(0.475mol/L\times 0.150L)=0.07125mol[/tex]

[tex]\text{Moles of sodium nitrite}=(0.302mol/L\times 0.150L)=0.0453mol[/tex]

The chemical equation for the reaction of nitrous acid and NaOH follows:

                   [tex]HNO_2+NaOH\rightleftharpoons NaNO_2+H_2O[/tex]

I:                0.07125     0.0224     0.0453

C:             -0.0224     -0.0224   +0.0224

E:              0.04885         -          0.0677

The power of the acid dissociation constant is the negative logarithm of the acid dissociation constant. The equation used is:

[tex]pK_a=-\log K_a[/tex]        ......(2)

We know:

[tex]K_a[/tex] for nitrous acid = [tex]7.2\times 10^{-4}[/tex]

Using equation 2:

[tex]pK_a=-\log (7.2\times 10^{-4})=3.143[/tex]

To calculate the pH of the acidic buffer, the equation for Henderson-Hasselbalch is used:

[tex]pH=pK_a+ \log \frac{\text{[conjugate base]}}{\text{[acid]}}[/tex]         .......(3)

Given values:

[tex][NaNO_2]=\frac{0.0677}{0.150}[/tex]

[tex][HNO_2]=\frac{0.04885}{0.150}[/tex]

[tex]pK_a=3.143[/tex]

Putting values in equation 3. we get:

[tex]pH=3.143-\log \frac{(0.0677/0.150)}{(0.04885/0.150)}\\\\pH=3.143-0.142\\\\pH=3.001[/tex]

Hence, the pH of the resulting solution will be 3.001

Answer:

NASA stands for National Aeronautics and Space Administration

Answer:

National Aeronautics and Space Administration

hope this will help you more

Answer:

106.905 amu is the mass of the other isotope

Explanation:

The atomic mass of an element is the sum of the masses of the isotopes multiplied by its abundance. The atomic mass of an element X with 2 isotopes is:

X = X-109*i + X-107*i

Where X is the atomic mass = 107.868 amu

X-109 = 108.905amu, i = 48.16% = 0.4816

X-107 = ?, i = 1-0.4816 = 0.5184

Replacing:

107.868amu = 108.905amu*0.4816 + X-107*0.5184

55.4194 = X-107*0.5184

106.905 = X-107

Answer:

79.7

Explanation:

Answer:79.7

Explanation:just got it right on the quiz!

Answer: 54 molecules of water will be formed in the reaction.

Explanation:

A balanced chemical equation is one where all the individual atoms are equal on both sides of the reaction. It follows the law of conservation of mass.

For the given unbalanced chemical equation, the balanced equation follows:

[tex]2C_8H_{18}+25O_2\rightarrow 16CO_2+18H_2O[/tex]

We are given:

Molecules of [tex]C_8H_{18}[/tex] = 6

Molecules of [tex]O_2[/tex] = 75

By the stoichiometry of the reaction:

If 2 molecules of [tex]C_8H_{18}[/tex] produces 18 molecules of water

So, 6 molecules of [tex]C_8H_{18}[/tex] will produce = [tex]\frac{18}{2}\times 6=54[/tex] molecules of water

Hence, 54 molecules of water will be formed in the reaction.

Answer:

pH = 5.76

Explanation:

We can solve this problem by using Henderson-Hasselbach's equation:

pH = pKa + log[tex]\frac{[SodiumAcetate]}{[AceticAcid]}[/tex]

We are already know all the required information, thus we input the data given by the problem:

pH = 4.76 + log(20/2)

And finally calculate the pH:

pH = 5.76

The pH of that acetic acid solution is 5.76.

Answer:

22/7 × [tex]10^{2}[/tex]

Explanation:

The area of a circle can be found out using π[tex]r^{2}[/tex]. Since r is the radius so if they multiply, they will give you an area of a square then multiply by 22/7 since it is a circle.

The surface area of the Tambourine at the given diameter of 10 inches is determined as 78.54 square inches.

A Tambourine has circular shape, and the area of the Tambourine can be determined by applying formula for area of a circle as shown below;

A = πr²

where;

r  = ¹/₂D

r = ¹/₂ x 10 in

r = 5 in

A = π(5)²

A = 25π in²

A = 78.54 in²

Thus, the surface area of the Tambourine at the given diameter of 10 inches is determined as 78.54 square inches.

Learn more about surface area here: https://brainly.com/question/76387

Answer:it becomes positively charged

Explanation:Some atoms can attract additional electrons so they become negatively charged.

(a) shows both acidic and basic properties

(b) creates a neutral pH in solution

(c) is an ionic compound formed from an acid-base reaction

(d) can react with acid but not with a base

Answer:

C - N Bond formation.

Explanation:

Imide synthesis is a chemical reaction in organic chemistry which consists of two acyl groups which bond to nitrogen atom. The compound structure is related to acid anhydrides. Imides are monoacyl which are used as valuable intermediates in organic synthesis.

Answer: It's used in chemistry to measure the concentration of chemical solutions.

Explanation:

Beer's Law is used in chemistry to measure the concentration of chemical solutions, to analyze oxidation, and to measure polymer degradation.

The law also describes the attenuation of radiation through the Earth's atmosphere

Answer:

D. Van der Waals forces are the strongest force between H2

molecules and between NH3 molecules.  

Explanation:

Van der Waal’s forces are the forces which arises due to disturbance in the electron density of the molecule.  

These are usually found in non polar molecules. Hence N2 is said to exhibit this force.

Out of these Van der Waals is the weakest force.

Answer:

The sideways movement occurs because the maximum velocity of the stream shifts toward the outside of the bend, causing erosion of the outer bank. At the same time the reduced current at the inside of the meander results in the deposition of coarse sediment, especially sand

Answer:

There are [tex]9[/tex] electrons in this atom.

Explanation:

Electron configuration of this atom: [tex]1s^2\, 2s^2\, 2p^5[/tex].

The electron orbitals of an atom are denoted as [tex]1s[/tex], [tex]2s[/tex], [tex]2p[/tex], [tex]3s[/tex], [tex]3p[/tex], etc. At any given time, an electron in this atom is located in exactly one orbital.

The electron configuration of an atom gives the number of electrons in each orbitals of this atom.

For example, in this atom, the superscript "[tex]2[/tex]" on the right of "[tex]1s[/tex]" means that there are two electrons in the [tex]1s\![/tex] orbital of this atom. Hence, [tex]1s^2\, 2s^2\, 2p^5[/tex] would translate to:

Hence, there would be [tex]2 + 2 + 5 = 9[/tex] electrons in total in this atom.

Answer:

46.525 u

Explanation:

From the question given above, the following data were obtained:

Isotope A (⁴⁶Ti)

Abundance (A%) = 77.100%

Mass of A = 45.95263 u

Isotope B (⁴⁸Ti):

Abundance (B%) = 17.100%

Mass of B = 47.94795 u

Isotope C (⁵⁰Ti):

Abundance (C%) = 5.800%

Mass of C = 49.94479 u

Average atomic mass =?

The average atomic mass of titanium can be obtained as follow:

Average = [(Mass of A × A%)/100] + [(Mass of B × B%)/100] + [(Mass of C × C%)/100]

= [(45.95263 × 77.1)/100] + [(47.94795 × 17.1)/100] + [(49.94479 × 5.8)/100]

= 35.429 + 8.199 + 2.897

= 46.525 u

Therefore, the average atomic mass of titanium is 46.525 u

The nuclear fusion results in the liberation of large amount of energy by the conversion of mass to energy. Thus, option B is correct.

The nuclear fusion has been a type of nuclear reaction in which the reaction of the two nuclei results in the nuclei with mass smaller than the reactants. In nuclear reactions, there has been the liberation of large amount of energy.

The energy released in the nuclear fusion has been formed by the conversion of the mass. Since, the formed product has nuclei with the mass smaller than the reactants, the remaining mass of the reactants has been converted to the energy.

Thus, in nuclear fusion, the energy released has been produced from the conversion of mass to energy. Thus, option B is correct.

For more information about the nuclear fusion, refer to the link:

https://brainly.com/question/16021285

Answer:

D

Explanation:

pH=-log(x)

x=0.001M,pH=3

x=0.01M,pH=2

x=0.1M,pH=1

x=1M,pH=0

Highest pH is for option D

Answer:

D.

Explanation:

The highest pH is D because

0.01 M HCL => 2

0.1 M HCL => 1

1 M HCL => 0

0.001 M HCL => 3

so the answer is D.

Answer:

[tex]pH = - log[H {}^{ + } ] \\ 8.8 = - log[H {}^{ + } ] \\ \: [H {}^{ + } ] = {10}^{ - 8.8} \\ [H {}^{ + } ] = 1.585 \times {10}^{ - 9} \: mol {dm}^{ - 3} [/tex]

Answer:

a. 13.0g/L is the concentration of SO2Cl2 after 3.00h

b. FALSE

Explanation:

The first order reaction follows the equation:

ln[SO2Cl2] = -kt + ln[SO2Cl2]₀

Where [] is the concentration after time t, k is rate constant = 1.42x10⁻⁴s⁻¹

[]₀ is initial concentration:

a. []₀ = 75.6g/1.25L = 60.48g/L

t in seconds: 3h * (3600s / 1h) = 10800s

Replacing:

ln[SO2Cl2] = -1.42x10⁻⁴s⁻¹*10800s + ln[60.48g/L]₀

ln[SO2Cl2] = 2.5687

[SO2Cl2] = 13.0g/L is the concentration of SO2Cl2 after 3.00h

b. The rate constant of a reaction remains constant if temeprature remains constant.

Answer:

mixture

Explanation:

an example of one is a salad you can separate the ingredients

Answer: Molarity of the unknown calcium hydroxide solution is 0.217 M.

Explanation:

Given: [tex]V_{1}[/tex] = 50.00 mL,     [tex]M_{1}[/tex] = ?

[tex]V_{2}[/tex] = 43.43 mL,         [tex]M_{2}[/tex] = 0.250 M

Formula used is as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]

Substitute the values into above formula as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}\\M_{1} \times 50.00 mL = 0.250 M \times 43.43 mL\\M_{1} = \frac{0.250 M \times 43.43 mL}{50.00 mL}\\= 0.217 M[/tex]

Thus, we can conclude that molarity of the unknown calcium hydroxide solution is 0.217 M.

Hi. You did not provide any response options. However, a PCR reaction proceeds as follows.

After the primers are added to the test tube containing the PCR components. This tube is placed in a device called a thermocycler. At that moment, the stage called denaturation will begin, where the thermocycler increases the temperature to the point of breaking the hydrogen bonds that hold the two strands of DNA together. The thermal cycler increases the temperature up to 96°C.

After that, the second step of the reaction begins. At that moment, the thermal cycler lowers the temperature to 55º - 65ºC, which is the ideal temperature for the primers to be able to attach themselves to the DNA strands, preparing them for the presence of the polymerase.

After that, the thermocycler raises the temperature to 72ºC, which is the ideal temperature for the DNA polymerase to work. At this stage, the DNA polymerase will use the DNA strand and the primer to build a new DNA strand, which will be annealed to the DNA strand used as a template.

These three steps will be repeated about 35 times, generating many copies of DNA.

Answer:

tanong mo sa teacher mo ok

Answer:

E = (50.0 kg)(3.00 x 108 m/s)2

Explanation:

Answer:

C₅H₈N₂O

Explanation:

The molecular formula denotes the various forms of atoms contained in a molecule at a particular fixed proportion.

The molecular ion M⁺ = 112.0499

and the exact mass values are given as follows:

C = 12.000

H = 1.0078

N = 14.003

O = 15.995

By assumption:

C = 12.000 × 5 = 60.0000

H = 1.0078 × 8 =    1.0078

N = 14.003 × 2 =  28.0060

O = 15.995 × 1 =   15.9950    

                        = 112.0634    

This is approximtely equal to 112.0499.

As such the Molecular formula for the compound = C₅H₈N₂O