Answer:
x = [tex]\frac{7\pi }{6}[/tex], [tex]\frac{11\pi }{6}[/tex] or x = 210°, 330°
Step-by-step explanation:
4sin(x) + 2 = 0
4sin(x) = -2
sin(x) = -1/2
x = [tex]\frac{7\pi }{6}[/tex], [tex]\frac{11\pi }{6}[/tex]
6 TH GRADE MATH , WHAT IS THE SLOPE? TY
Answer:
Step-by-step explanation:
The slope of a line is the measure of the steepness and the direction of the line. Finding the slope of lines in a coordinate plane can help in predicting whether the lines are parallel, perpendicular, or none without actually using a compass.
The slope of any line can be calculated using any two distinct points lying on the line. The slope of a line formula calculates the ratio of the "vertical change" to the "horizontal change" between two distinct points on a line. In this article, we will understand the method to find the slope and its applications.
That is what Slope is.
Answer:
Step-by-step explanation:
Slope :( 1,1)
You start on the y-axis point which is (0,1) as you can see it is going up so I used the “up left” strategy. You go up 1 to the left 1 since the line intersects at point (1,2)
Let V and W be vector spaces and T: v → w be linear. (a) Prove that T is one-to-one if and only if T carries linearly inde- pendent subsets of V onto linearly independent subsets of W. (b) Suppose that T is one-to-one and that S is a subset of V. Prove that S is linearly independent if and only if T(S) is linearly inde- pendent. Suppose β and onto. Prove that T(3) = {T(m), T(v2), for W (c) (vi, v2 , . . . , Un} is a basis for V and T is one-to-one ,T(vn)} is a basis
(a) T is one-to-one if and only if T carries linearly independent subsets of V onto linearly independent subsets of W.
(b) If T is one-to-one, then S is linearly independent if and only if T(S) is linearly independent.
(c) If β is a basis for V and T is one-to-one and onto, then T(β) is a basis for W.
(a) Assume T is one-to-one. Let S be a linearly independent subset of V, and suppose T(S) is linearly dependent. Then there exist distinct vectors s1, s2, ..., sn in S such that T(s1), T(s2), ..., T(sn) are linearly dependent. This means that there exist scalars c1, c2, ..., cn, not all zero, such that c1T(s1) + c2T(s2) + ... + cnT(sn) = 0. Since T is linear, we have T(c1s1 + c2s2 + ... + cnsn) = 0. But since T is one-to-one, this implies that c1s1 + c2s2 + ... + cnsn = 0, contradicting the assumption that S is linearly independent. Hence, T(S) must be linearly independent.
Conversely, assume that T carries linearly independent subsets of V onto linearly independent subsets of W. Let v1 and v2 be distinct vectors in V, and suppose T(v1) = T(v2). Then {v1, v2} is linearly dependent, which implies that there exist scalars c1 and c2, not both zero, such that c1v1 + c2v2 = 0. Applying T to both sides yields c1T(v1) + c2T(v2) = 0, which implies that T(v1) and T(v2) are linearly dependent. This contradicts the assumption that T carries linearly independent subsets of V onto linearly independent subsets of W. Hence, T must be one-to-one.
(b) Assume T is one-to-one and let S be a subset of V. Suppose S is linearly independent and that T(S) is linearly dependent. Then there exist distinct vectors s1, s2, ..., sn in S such that T(s1), T(s2), ..., T(sn) are linearly dependent. This means that there exist scalars c1, c2, ..., cn, not all zero, such that c1T(s1) + c2T(s2) + ... + cnT(sn) = 0. Since T is linear, we have T(c1s1 + c2s2 + ... + cnsn) = 0. But since T is one-to-one, this implies that c1s1 + c2s2 + ... + cnsn = 0, contradicting the assumption that S is linearly independent. Hence, T(S) must be linearly independent.
Conversely, assume that T(S) is linearly independent whenever S is a linearly independent subset of V. Let v1 and v2 be distinct vectors in V, and suppose T(v1) = T(v2). Then {v1, v2} is linearly dependent, which implies that there exist scalars c1 and c2, not both zero, such that c1v1 + c2v2 = 0. Since {v1, v2} is linearly dependent, we have either v1 = 0 or v2 = 0. Without loss of generality, assume v1 = 0. Then T(v1) = 0 = T(v2), and hence T({v1, v2}) = {0} is linearly dependent. This contradicts the assumption that T carries linearly independent subsets of V onto linearly independent subsets of W. Hence, S must be linearly independent.
(c) First, we will show that T(β) spans W. Let w be an arbitrary vector in W. Since T is onto, there exists some vector v in V such that T(v) = w. Since β is a basis for V, there exist scalars c1, c2, ..., cn such that v = c1v1 + c2v2 + ... + cnvn. Applying T to both sides, we have w = T(v) = T(c1v1 + c2v2 + ... + cnvn) = c1T(v1) + c2T(v2) + ... + cnT(vn), which implies that T(β) spans W.
Next, we will show that T(β) is linearly independent. Suppose there exist scalars c1, c2, ..., cn such that c1T(v1) + c2T(v2) + ... + cnT(vn) = 0. Applying T to both sides, we have T(c1v1 + c2v2 + ... + cnvn) = 0. But since T is one-to-one, this implies that c1v1 + c2v2 + ... + cnvn = 0, which implies that c1 = c2 = ... = cn = 0, since β is a basis for V. Hence, T(β) is linearly independent.
Since T(β) spans W and is linearly independent, it is a basis for W. Therefore, if β is a basis for V and T is one-to-one and onto, then T(β) is a basis for W.
Learn more about linearly independent subsets here
brainly.com/question/14292641
#SPJ4
For a standard normal distribution, find:
P(-2.11 < z < -0.85)
Answer:
Step-by-step explanation:
Using a standard normal table, we can find the area under the curve between -2.11 and -0.85.
P(-2.11 < z < -0.85) = P(z < -0.85) - P(z < -2.11)
Using the table, we find:
P(z < -0.85) = 0.1977
P(z < -2.11) = 0.0174
Therefore,
P(-2.11 < z < -0.85) = 0.1977 - 0.0174 = 0.1803
So the probability that a standard normal random variable falls between -2.11 and -0.85 is 0.1803.
Work out the value of the missing angle
x
.
The diagram is not drawn to scale.
Answer:
No diagram provided here
Oliver's normal rate of pay is $10.40 an hour.
How much is he paid for working 5 hours overtime one Saturday at time-and-a-half?
Mark is going to an awards dinner and wants to dress appropriately. He is running behind schedule and asks his little brother to randomly select an outfit for him.
Mark has one blue dress shirt, one white dress shirt, one black dress shirt, one pair of black slacks, one pair of grey slacks, and one red tie. All six of his possible outfits are listed below.
Let
A
AA be the event that Mark's little brother selects an outfit with a white shirt and grey slacks and
B
BB be the event that he selects an outfit with a black shirt.
What is
P
(
A
or
B
)
P(A or B)P, left parenthesis, A, start text, space, o, r, space, end text, B, right parenthesis, the probability that Mark's little brother selects an outfit with a white shirt and grey slacks or an outfit with a black shirt?
please help me with math quiz i’ll give you brainlist
Answer:
Answer: B. Symmetric.
Explanation:
In a symmetric distribution, the data is evenly distributed around the mean or median, creating a mirror image on both sides of the center. In this histogram, the median and mean are very close together at 55 and the bars on both sides of the center are roughly equal in height, indicating a fairly even distribution. Therefore, the histogram is symmetric.
If a drug has a concentration of 5.315 mg per 3.743 mL, how many mL are needed to give 4.719 gram of the drug? Round to 1 decimal.
Answer:
888.4 mL.
Step-by-step explanation:
To solve this problem, we can use the following formula:
Amount of drug (in mg) = concentration (in mg/mL) × volume (in mL)
We are given the concentration of the drug as 5.315 mg per 3.743 mL. To find the volume of the drug needed to give 4.719 g, we need to rearrange the formula to solve for volume:
Volume (in mL) = amount of drug (in mg) ÷ concentration (in mg/mL)
First, we need to convert 4.719 g to mg by multiplying by 1000:
4.719 g × 1000 mg/g = 4719 mg
Now we can substitute the given concentration and the calculated amount of drug into the formula and solve for volume:
Volume (in mL) = 4719 mg ÷ 5.315 mg/mL
Volume (in mL) ≈ 888.5 mL
Therefore, approximately 888.5 mL of the drug are needed to give 4.719 g. Rounded to 1 decimal, the answer is 888.4 mL.
In △ △ ABC, CJ = 18. If CG = BG, what is KJ? Triangle A B C is divided by 4 segments. A H is the height. C J extends from C to side A B. B I extends from B to side A C. H I extends from the height on B C to I on A C. C J and B I intersect at point K. A J and B J are congruent. A I and C I are congruent.
Solving for CI in terms of the given lengths, we get: [tex]Cl=\frac{\sqrt{BG^{2} -IM^{2} } }{\sqrt{2} }[/tex]
Substituting this expression for CI and the given value for CG into the expression for BI, we get: [tex]BI=CG-\frac{\sqrt{BG^{2} -IM^{2} } }{\sqrt{2} }[/tex].
What is triangle?A triangle is a three-sided polygon, which is a closed two-dimensional shape with straight sides. In a triangle, the three sides connect three vertices, or corners, and the angles formed by these sides are called the interior angles of the triangle. The sum of the interior angles of a triangle is always 180 degrees. Triangles can be classified by their side lengths and angle measurements. For example, an equilateral triangle has three sides of equal length, and all of its angles are 60 degrees; an isosceles triangle has two sides of equal length, and its base angles are also equal; a scalene triangle has three sides of different lengths, and all of its angles are also different. Triangles are a fundamental shape in mathematics and geometry, and they have numerous applications in fields such as architecture, engineering, physics, and more.
Given by the question.
Based on the given information, we can start by drawing a diagram of triangle ABC and the segments AH, BJ, CI, CJ, and BI as described.
Since CG = BG, we can draw the perpendicular bisector of side AC passing through point G, which will intersect side AB at its midpoint M.
Now, we can see that triangle CGB is isosceles with CG = BG, so the perpendicular bisector of side CB also passes through point G. This means that G is the circumcenter of triangle ABC, and therefore, the distance from G to any vertex of the triangle is equal to the radius of the circumcircle.
Next, we can use the fact that AJ and BJ are congruent to draw the altitude from point J to side AB, which we will call JN. Similarly, we can draw the altitude from point I to side BC, which we will call IM.
Since AJ and BJ are congruent, the altitude JN will also be the perpendicular bisector of side AB, so it will pass through point M. Similarly, the altitude IM will pass through point G, which is the circumcenter of triangle ABC.
Now, we can use the Pythagorean theorem to find the lengths of JN and IM in terms of the given lengths:
[tex]JN^{2}= AJ^{2} -AN^{2} \\ = ( AH+HN)^{2} - AN^{2} \\=AH^{2} +2AH*HN+HN^{2}-AN^{2} \\[/tex]
[tex]IM^{2}= CI^{2} -CM^{2} \\=( CG-GM)^{2} -CM^{2} \\CG^{2}-2CG*GM+GM^{2} -CM^{2}[/tex]
Since CG = BG and GM = BM (since M is the midpoint of AB), we can simplify the expression for IM^2 as follows:
[tex]IM^{2}[/tex] = [tex]BG^{2}[/tex] - 2BG * BM + [tex]BM^{2}[/tex] - [tex]CM^{2}[/tex]
= [tex]BG^{2}[/tex] - [tex]BM^{2}[/tex] - [tex]CM^{2}[/tex]
Now, we can use the fact that BJ and CI intersect at point K to find the length of KJ:
KJ = BJ - BJ * (CK/CI)
= BJ * (1 - CK/CI)
= BJ * (1 - BM/CM)
To find BM/CM, we can use the fact that triangle BCI is isosceles with BI = CI, so the altitude IM is also a median of the triangle. This means that CM = 2/3 * BI. Similarly, we can find BJ in terms of JN using the fact that triangle ABJ is isosceles with AJ = BJ:
BJ = 2 * JN
Substituting these expressions into the equation for KJ, we get:
KJ = 2 * JN * (1 - 2/3 * BI/CM)
Now, we just need to find BI/CM in terms of the given lengths. Using the fact that triangle BCI is isosceles with BI = CI, we can find BI in terms of CG:
BI = CG - CI
Substituting this expression into the equation for [tex]IM^{2}[/tex]and simplifying, we get:
[tex]IM^{2}[/tex] =[tex]BG^{2}[/tex] - CG * CI
To learn more about Pythagorean theorem:
https://brainly.com/question/28361847
#SPJ1
What is the meaning of "invertible n x n matrices"?
Answer: A matrix A of dimension n x n is called invertible if and only if there exists another matrix B of the same dimension, such that AB = BA = I, where I is the identity matrix of the same order.
Step-by-step explanation:
hope it helped! <3
fill in the blank. Toward the end of a game of Scrabble, you hold the letters D, O, G, and Q. You can choose 3 of these 4 letters and arrange them in order in ______ different ways. (Give your answer as a whole number.)
Toward the end of a game of Scrabble, you hold the letters D, O, G, and Q. You can choose 3 of these 4 letters and arrange them in order in 24 different ways.
To solve this problem, we need to use the concept of permutations. A permutation is an arrangement of objects in a specific order. In this case, we need to find the number of permutations that can be made from the letters D, O, G, and Q when we choose 3 of these 4 letters.
The formula for finding the number of permutations is:
n! / (n-r)!
where n is the total number of objects and r is the number of objects we choose.
Using this formula, we can calculate the number of permutations as follows:
4! / (4-3)!
= 4! / 1!
= 4 x 3 x 2 x 1 / 1
= 24
Therefore, we can arrange the chosen 3 letters in 24 different ways.
To learn more about permutations click on,
https://brainly.com/question/30660588
#SPJ4
A parent donated 36 fruit cups and 24 bananas to fifth grade. The teacher wanted to make field trip snack bags with the donated food and wondered about the ways snacks could be packed. To be fair the teacher wants to make sure that all bags are exactly the same.
A) What is the greatest number of snack bags that the teacher can make, if each bag is identical? How do you know ?
B) What other numbers of snack bags could she make? How do you know?
2) Another parent also donated 24 bananas, so there are 48 bananas total. Now what is the greatest number of snack bags can that can be made?
3) The teacher realized that she miscounted and had only 30 fruit cups. How many snack bags can she make with 48 bananas and fruit cups?
4) What do the different numbers of snack bags that can be made have to do with the number of fruit cups and number of bananas?
Calculate the area of the shaded segments in the following diagrams. (a) 12 cm 40° (b) 58° 16 cm
(a) 12 cm 40° : Area of shaded segments = 301.44 sq. cm.
(b) 58° 16 cm : Area of shaded segments = 777.04 sq. cm.
Explain about the sector of circle?Two radii that meet at the center to form a sector define a circle. The sector is the portion of the circle created by these two radii. Knowing a circle's central angle calculation and radius measurement are both crucial for solving circle-related difficulties.
Area of sector of circle = Ф/360 * πr²
π = 3.14
r is the radius
Ф is the angle subtended.
(a) 12 cm 40°
Area of shaded segments = 40/60 * 3.14* 12²
Area of shaded segments = 40/60 * 452.16
Area of shaded segments = 301.44 sq. cm.
(b) 58° 16 cm
Area of shaded segments = 58/60 * 3.14* 16²
Area of shaded segments = 58/60 * 803.84
Area of shaded segments = 777.04 sq. cm.
Know more about the sector of circle
https://brainly.com/question/22972014
#SPJ1
The diagram for the question is attached.
A company rents storage sheds shaped like rectangular prisms. Each shed is 11 feet long, 7 feet wide, and 12 feet tall. The rental cost is $3 per cubic foot. How much does it cost to rent one shed?
The cost to rent one shed of the rectangular prism shaped shed is $2772.
What is area?The size of a section on a surface is determined by its area. Surface area refers to the area of an open surface or the border of a three-dimensional object, whereas the area of a plane region or plane area refers to the area of a shape or planar lamina.
What is a prism?A rectangular prism is a polyhedron in geometry that has two parallel and congruent sides. It also goes by the name cuboid. Six faces, each with a rectangle form and twelve edges, make up a rectangular prism. It is referred to as a prism because of the extent of its cross-section.
Volume of prism= BH
where B= area of base and H= height
B= 11*7 = 77 feet²
H= 12 feet
Volume= 77*12=924 cubic feet
Cost =$3 per cubic foot
Total cost= 3*924= $2772
To know more about area, visit
https://brainly.com/question/27683633
#SPJ1
find a parameterization of each of the following surfaces, in terms of sines, cosines, and hyperbolic sines and cosines
Parameterizing a surface over a rectangle Parameterizing the surface z = x²+2y² over the rectangular region R defined by -3 ≤ x ≤ 3, −1 ≤ y ≤ 1 are falls under the range of R.
Let's start by expressing x and y as functions of u and v. Since x varies between -3 and 3 over R, we can use the following parameterization for x:
x = u
where u varies between -3 and 3. Similarly, since y varies between -1 and 1 over R, we can use the following parameterization for y:
y = v
where v varies between -1 and 1.
Next, we can use these parameterizations for x and y to express z as a function of u and v. Substituting x = u and y = v into the equation z = x² + 2y², we get:
z = u² + 2v²
So, the parameterization of the surface z = x² + 2y² over the rectangular region R is given by:
x = u, y = v, z = u² + 2v²
where -3 ≤ u ≤ 3 and -1 ≤ v ≤ 1.
The parameterization allows us to study various properties of the surface z = x² + 2y² over the rectangular region R.
To know more about surface area here
https://brainly.com/question/27784309
#SPJ4
Complete Question:
Parameterizing a surface over a rectangle Parameterizing the surface z = x²+2y² over the rectangular region R defined by -3 ≤ x ≤ 3, −1 ≤ y ≤ 1.
Roberto must make his costume for the school play. He needs a piece of fabric that is 2 2/3 yards long and 1 1/2 yard wide. What is the area of the piece of fabric Roberto needs?
Roberto needs 4 square yards of fabric to make his costume.
What is improper fraction?A fraction that has the numerator higher than or equal to the denominator is said to be inappropriate. For instance, the fraction 7/3 is incorrect since 7 is bigger than 3. Mixed numbers, which combine a whole number and a correct fraction, can be created from improper fractions.
Given that, piece of fabric that is 2 2/3 yards long and 1 1/2 yard wide.
Convert the length from a mixed number to an improper fraction:
2 2/3 = (2 x 3 + 2)/3 = 8/3
1 1/2 = 3/2
The area of the rectangle is:
Area = Length x Width
Substituting the values we have:
Area = (8/3) x (3/2) = 4
Hence, Roberto needs 4 square yards of fabric to make his costume.
Learn more about improper fraction here:
https://brainly.com/question/29292275
#SPJ1
12. If zo 125°, what does zz equal in this figure?
A. 125°
B. 180°
C. 35°
D. 55°
Answer:
A
Step-by-step explanation:
∠ o and ∠ z are alternate exterior angles and are congruent, that is
∠ z = ∠ o = 125°
The bar graph in the following graphic represents fictional net exports in billions of dollars for five countries.
Net exports are obtained by subtracting total imports from total exports; a negative net export means the
country imported more goods than it exported.
Net Exports (Billions of dollars)
United States
Denmark
China
Germany
Spain
-150 -100
-50
Net Exports (Billions of dollars)
What is the sum of net exports for Germany and China ?
a.
-80 billion dollars
b. 180 billion dollars
0 50 100 150
C. 90 billion dollars
d. 150 billion dollars
[tex]80[/tex] billion dollars' worth of net exports were made by China and Germany. The first claim is accurate.
What do the terms "export" and "import" mean?Export is the process of supplying goods and services to some other nation. Contrarily, importing is the act of acquiring goods from outside and transferring them into one's own nation.
What does GDP export mean?The domestic product (GDP) is a measure of all the products and services generated in the United States; thus, changes in exports change significantly in the demand for goods and services made in the United States abroad.
The total of China's and Germany's net exports would be:
[tex]50[/tex] billion + [tex]30[/tex] billion [tex]= 80[/tex] billion
As a result, Germany & China's consolidated net exports amounted to [tex]80[/tex] billion u.s. dollars, reflecting answer option (a).
To know more about exports visit:
https://brainly.com/question/20375046
#SPJ1
the values or variables listed in the function declaration are called _____ paramters to the function.
The values or variables listed in the function declaration are called formal parameters to the function.
They are used to store the data that is passed into the function when it is called. The formal parameters are local variables, meaning that the values stored in them are only available within the function.
The arguments are the values passed to the function when it is called. These values are then assigned to the formal parameters and are used within the function to perform the desired task.
Formal arguments are produced at function entry and removed at function exit, behaving similarly to other local variables inside the function.
To learn more about formal parameters link is here
brainly.com/question/15008938
#SPJ4
△CDE∼△PQR. CD=9 m, EC=15 m, PQ=15 m. What is the length of RP?
Answer:
RP = 25
Step-by-step explanation:
since the triangles are similar then the ratios of corresponding sides are in proportion, that is
[tex]\frac{RP}{EC}[/tex] = [tex]\frac{PQ}{CD}[/tex] ( substitute values )
[tex]\frac{RP}{15}[/tex] = [tex]\frac{15}{9}[/tex] ( cross- multiply )
9 RP = 15 × 15 = 225 ( divide both sides by 9 )
RP = 25
let z=a+bi/a-bi where a and b are real numbers. prove that z^2+1/2z is a real number.
Answer:
Step-by-step explanation:
To prove that z^2 + 1/2z is a real number, we need to show that the imaginary part of z^2 + 1/2z is equal to zero.
We know that z = (a+bi)/(a-bi)
Multiplying the numerator and denominator by the complex conjugate of the denominator, we get
z = (a+bi)(a+bi)/(a-bi)(a+bi)
z = (a^2 + 2abi - b^2)/(a^2 + b^2)
Expanding z^2, we get:
z^2 = [(a^2 + 2abi - b^2)/(a^2 + b^2)]^2
z^2 = (a^4 + 2a^2b^2 + b^4 - 2a^2b^2 + 4a^2bi - 4b^2i)/(a^4 + 2a^2b^2 + b^4)
Simplifying, we get:
z^2 = (a^4 - b^4 + 2a^2bi)/(a^4 + 2a^2b^2 + b^4)
Now, let's compute z^2 + 1/2z:
z^2 + 1/2z = (a^4 - b^4 + 2a^2bi)/(a^4 + 2a^2b^2 + b^4) + 1/2[(a+bi)/(a-bi)]
To simplify this expression, we need to find a common denominator:
z^2 + 1/2z = (2a^5 - 2a^3b^2 + 3a^4b - 3ab^4 - 2b^5 + 3a^3bi + 3ab^3i)/(2(a^4 + 2a^2b^2 + b^4))
We can see that the imaginary part of z^2 + 1/2z is (3a^3b - 3ab^3)/(2(a^4 + 2a^2b^2 + b^4))
However, we know that a and b are real numbers, so the imaginary part of z^2 + 1/2z is zero.
Therefore, z^2 + 1/2z is a real number.
HEEELLLLPPPPP MEEEEEEEEE
1. Solve.
a. 2/5t = 6
b. -4.5 = a-8
c. 1/2+p=-3
d. 1/2 = x3
e. -12 = -3y
The equation is saying that -12 is equal to -3 multiplied by y. To solve for y, divide both sides by -3. This would give an answer of 4.
What is equation?An equation is a mathematical statement that expresses the equality or inequality of two values or expressions. It consists of two expressions connected by an equals sign, inequality sign or other relational operator. Equations can involve numbers, variables, and operations such as addition, subtraction, multiplication, division and exponentiation. An equation can be used to solve problems related to mathematics, science, engineering, finance, and many other disciplines. Equations can also be used to model and describe real-world phenomena.
t = 30
a = 12.5
p = -5.5
x = 2/3
y = 4.
To learn more about equation
https://brainly.com/question/2228446
#SPJ1
a. t = 30/2; To solve this equation, divide both sides by 2/5. The resulting equation is t = 30/2.
What is equation?An equation is a mathematical statement that expresses the equality of two expressions by using an equals sign (=). It states that the two expressions on either side of the equals sign are equal in value. An equation is an example of a mathematical problem, which can be used to solve real-world problems.
b. a = 4.5; To solve this equation, add 8 to both sides. The resulting equation is a = 4.5.
c. p = -7/2; To solve this equation, add 3 to both sides. The resulting equation is p = -7/2.
d. x = 2; To solve this equation, divide both sides by 3. The resulting equation is x = 2.
e. y = 4; To solve this equation, divide both sides by -3. The resulting equation is y = 4.
To learn more about equation
https://brainly.com/question/2228446
#SPJ1
In the diagram of right triangle ABC shown below, AB= 14 and AC = 9.
What is the measure of ZA, to the nearest degree?
1) 33
2) 40
3) 50
4) 57
The measure of the angle A is 49.99 degrees or 50 degrees if the length of AB = 14 and AC = 9.
What is trigonometry?Trigonometry is a branch of mathematics that deals with the relationship between sides and angles of a right-angle triangle.
We have a given a right angle triangle in the picture
It is required to find the measure of angle A
Applying cos ratio to find the measure of the angle A:
cosA = 9/14
cosA = 0.642
A = 49.99 ≈ 50 degree
Thus, the measure of the angle A is 49.99 degrees or 50 degrees if the length of AB = 14 and AC = 9.
Learn more about trigonometry here:
https://brainly.com/question/26719838
3 Open Ended Two fractions have a common denominator
of 8. What could the two fractions be?
3. what cou
two fractions with a common denominator of 8 can be expressed in the form of a/b and c/8, where a and c are integers. As long as a and c are not both multiples of 8 then these fractions would have a common denominator of 8.
What is common denominator ?A number that can be divided exactly by all of the denominators in a group of fractions is referred to as a common denominator. 2. A noun that counts. A trait or attitude that all members of a group share is known as a common denominator.
According to the given information:Since the two fractions have a common denominator of 8, they can be written in the form of a/b and c/8, where a and c are integers.
There are many possible combinations of integers that could satisfy this condition. Here are some examples:
1/8 and 3/8
2/8 (which simplifies to 1/4) and 6/8 (which simplifies to 3/4)
4/8 (which simplifies to 1/2) and 7/8
5/8 and 2/8 (which simplifies to 1/4)
3/8 and 4/8 (which simplifies to 1/2)
In general, any two fractions with a common denominator of 8 can be expressed in the form of a/b and c/8, where a and c are integers. As long as a and c are not both multiples of 8 then these fractions would have a common denominator of 8.
To know more about common denominator visit:
https://brainly.com/question/29775115
#SPJ1
Allan painted the circular patch on his driveway. He used the formula below to calculate the area of the circular patch. The diameter of the circular patch was 20 meters. What was the area of the patch? Assume pi=3.14
Answer: 314 square meters
Step-by-step explanation:
The formula for the area of a circle is given by A = πr^2, where r is the radius of the circle. Since the diameter of the circular patch is given as 20 meters, the radius would be half of that or 10 meters.
So, using the formula, we can calculate the area of the circular patch as follows:
A = πr^2
A = π(10)^2
A = 3.14(100)
A = 314 square meters
Therefore, the area of the circular patch is 314 square meters.
PLS HELP FAST + BRAINLIEST!!
Can I please get help it's an EMERGENCY!
The number of hours it will take the same dog to run 26 1/10 miles is 7.2 hours
How long will it take the dog to run 26 1/10 miles?7 1/4 miles in 2 hours
26 1/10 miles in x hours
Equate miles ratio hours
7 ¼ miles : 2 hours = 26 ⅒ miles : x hours
7.25 / 2 = 26.10 / x
cross product
7.25 × x = 26.10 × 2
7.25x = 52.20
divide both sides by 7.25
x = 52.20 / 7.25
x = 7.2 hours
Ultimately, it will take 7.2 hours for the dog to run 26⅒ miles.
Read more on ratio:
https://brainly.com/question/2328454
#SPJ1
A water cooler springs a leak and empties in 2 minutes. The graph below shows the rate at which water leaks from the cooler as a function of time.
The amount of water that was in the cooler before it started leaking was 6 gallons.
Describe Integration?Integration is a mathematical process that involves finding the integral of a function. It is the reverse operation of differentiation, which involves finding the derivative of a function. The integral of a function is a measure of the area under the curve of the function, between two given limits of integration.
The graph shows the rate at which water leaks from the cooler as a function of time, which means that the y-axis represents the rate of leakage in gallons per minute (gal/min), and the x-axis represents the time in minutes.
Since we know that the cooler emptied in 2 minutes, we can integrate the leakage rate over the time interval [0, 2] to find the total amount of water that leaked out:
Total amount of water leaked = ∫[0,2] leakage rate(t) dt
The leakage rate is given by the graph, which consists of a straight line connecting two points: (0,6) and (2,0). We can express this line as a linear equation in slope-intercept form:
leakage rate(t) = mt + b
where m is the slope of the line and b is the y-intercept. To find the slope, we can use the formula:
m = (y2 - y1) / (x2 - x1)
where (x1, y1) = (0,6) and (x2, y2) = (2,0). Plugging in the values, we get:
m = (0 - 6) / (2 - 0) = -3
So the equation of the line is:
leakage rate(t) = -3t + 6
Now we can integrate this equation over the time interval [0, 2] to get the total amount of water leaked:
Total amount of water leaked = ∫[0,2] (-3t + 6) dt
= [-3t²/2 + 6t] from 0 to 2
= (-3(2)²/2 + 6(2)) - (-3(0)²/2 + 6(0))
= (6 - 0) - (0 - 0)
= 6 gallons
Therefore, the amount of water that was in the cooler before it started leaking was 6 gallons.
To know more about amount visit:
https://brainly.com/question/14806644
#SPJ1
The complete question is :
A fair coin is tossed five times. Explain why the probability of getting exactly three heads is 0.3125.
The value of the probability is 0.3125 and this is proved by the calulations below
How to explain the value of the probabilityThe probability of getting exactly 3 heads in 5 coin tosses can be calculated by multiplying the probability of one specific combination of 3 heads and 2 tails by the number of possible combinations.
The probability of one specific combination, for example HHTTT, is (1/2)^5 = 1/32, because each toss has a 1/2 chance of being a head or a tail.
There are 5C3 = 10 possible combinations of 3 heads and 2 tails in 5 tosses.
For example: HHTTT, HTHTT, HTTHT, HTHHT, TTHHH, etc.
Therefore, the probability of getting exactly 3 heads is:
Probability = 10 * (1/32)
Probability = 10/32
Probability = 0.3125.
Hence, the value of the probability is 0.3125.
Read more about probability at
https://brainly.com/question/24756209
#SPJ1
Point E represents the center of this circle. Angle DEF
has a measure of 80%.
Drag and drop a number into the box to correctly
complete the statement.
An angle measure of 80° is the size of an angle
that turns through
20
50
one-degree turns.
80
100
K
The measure of the arc intercepted by the angle and the vertical angles make up the angle subtended at the center. As a result, XYZ has a value of 35°.
What are angles?Two lines intersect at a location, creating an angle.
An "angle" is the term used to describe the width of the "opening" between these two rays. The character is used to represent it.
Angles are frequently expressed in degrees and radians, a unit of circularity or rotation.
In geometry, an angle is created by joining two rays at their ends. These rays are referred to as the angle's sides or arms.
An angle has two primary components: the arms and the vertex. T
he two rays' shared vertex serves as their common terminal.
Hence, The measure of the arc intercepted by the angle and the vertical angles make up the angle subtended at the center. As a result, XYZ has a value of 35°.
Learn more on angles here click here:
brainly.com/question/2046046
#SPJ1
