Someone help me fill this out TY

Please fill it out in each blank :)

Answer: A volume of 20.49 milliliters of sodium formate do you need to measure to make this buffer (assuming the rest is formic acid).

Explanation:

Given: Total volume of the buffer = 21.0 mL

[tex]\frac{[HCOONa]}{[HCOOH]} = 4[/tex] ... (1)

It is assumed that the volume of HCOONa is x. Hence, volume of HCOOH is (21.0 - x) mL.

Hence,

[HCOONa] = Molarity [tex]\times[/tex] Volume

= 0.10 [tex]\times[/tex] x

= 0.1x mmol

Similarly, [HCOOH] = Molarity [tex]\times[/tex] Volume

= 0.10 [tex]\times[/tex] (21.0 - x) mmol

Using equation (1),

[tex]\frac{[HCOONa]}{[HCOOH]} = 4\\\frac{0.1x}{(21.0 - x)} = 4\\0.1x = 84.0 - 4x\\4.1x = 84.0\\x = 20.49 mL[/tex]

As x is the volume of sodium formate. Hence, 20.49 mL of sodium formate is required to make the buffer.

Thus, we can conclude that a volume of 20.49 milliliters of sodium formate do you need to measure to make this buffer (assuming the rest is formic acid).

Answer:

Aluminum tribromide: AlBr₃, however, it should be just aluminum bromide.

Sulfur dioxide: SO₂.

Beryllium hydride: BeH₂

Magnesium(II) oxide: MgO; however the roman numeral is not used in Mg as it just has one oxidation number.

Copper(II) oxide: CuO.

Calcium sulfate: CaSO₄

Nitric acid: HNO₃.

Explanation:

Hello there!

In this case, it seems that the formulas were not given, however, we can write the correct one for each given compound according to the widely used nomenclature rules as shown below:

Aluminum tribromide: AlBr₃, however, it should be just aluminum bromide.

Sulfur dioxide: SO₂.

Beryllium hydride: BeH₂

Magnesium(II) oxide: MgO; however the roman numeral is not used in Mg as it just has one oxidation number.

Copper(II) oxide: CuO.

Calcium sulfate: CaSO₄

Nitric acid: HNO₃.

Regards!

Answer:

THE ANSWER IS: copper(I) sulfide.

hope this helped <3

Explanation:

Answer: The mass of sample that remained is 0.127 mg

Explanation:

The integrated rate law equation for first-order kinetics:

[tex]k=\frac{2.303}{t}\log \frac{a}{a-x}[/tex] ......(1)

Given values:

a = initial concentration of reactant = 0.500 mg

a - x = concentration of reactant left after time 't' = ?mg

t = time period = 28 s

k = rate constant = [tex]0.049s^{-1}[/tex]

Putting values in equation 1:

[tex]0.049s^{-1}=\frac{2.303}{28s}\log (\frac{0.500}{(a-x)})\\\\\log (\frac{0.500}{(a-x)})=\frac{0.049\times 28}{2.303}\\\\\frac{0.500}{a-x}=10^{0.5957}\\\\frac{0.500}{a-x}=3.94\\\\a-x=\frac{0.500}{3.942}=0.127mg[/tex]

Hence, the mass of sample that remained is 0.127 mg

Answer:

B

Explanation:

the concentration will be the same disabled

The density (g/mL) for a 20.0-mL sample of a salt solution has a mass of 24.0 g is 1.2 g/ml.

Density is the mass per unit volume. Density is a scalar quantity. It is denoted by d and the symbol for density is given as rho, a Greek symbol. Density is calculated as mass divided by volume.

Mass is the quantity of matter in a physical body. The product of the molar mass of the compound and the moles of the substance are defined as mass.

Volume is the space occupied by a three-dimensional object. Volume is calculated by dividing mass by density.

Given, the 20.0-mL sample of a salt solution, which is the volume.

The mass of the solution is 24.0 g

To calculate the density

mass/volume

24.0 / 20.0 = 1.2 g/ml

Thus, the density of the given salt solution is 1.2 g/ml.

To learn more about density, refer to the link:

https://brainly.com/question/17851361

#SPJ2

Answer:

1.207 ××10⁻¹⁷ J

Explanation:

Step 1: Given and data

Step 2: Calculate the energy (E) of the photon

We will use the Planck-Einstein's relation.

E = h × ν

E = (6.626 × 10⁻³⁴ J.s) × ( 1.821 × 10¹⁶ s⁻¹) = 1.207 ××10⁻¹⁷ J

Answer:

941 g

Explanation:

Step 1: Write the balanced equation

Zn + 2 HCl ⇒ ZnCl₂ + H₂

Step 2: Calculate the moles corresponding to 14.5 g of H₂

The molar mass of H₂ is 1.01 g/mol.

14.5 g × 1 mol/1.01 g = 14.4 mol

Step 3: Calculate the number of moles of Zn required to form 14.4 moles of H₂

The molar ratio of Zn to H₂ is 1:1. The moles of Zn required are 1/1 × 14.4 mol = 14.4 mol.

Step 4: Calculate the mass corresponding to 14.4 moles of Zn

The molar mass of Zn is 65.38 g/mol.

14.4 mol × 65.38 g/mol = 941 g

Answer: The empirical and molecular formula for the given organic compound is [tex]C_9H_{13}O_3N[/tex]

Explanation:

Let the mass of the compound be 100 g

Given values:

% of C = 59.0%

% of H = 7.15%

% of O = 26.20%

% of N = 7.65%

Mass of C = 59.0 g

Mass of H = 7.15 g

Mass of O = 26.20 g

Mass of N = 7.65 g

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

To formulate the empirical formula, we need to follow some steps:

Molar mass of C = 12 g/mol

Molar mass of H = 1 g/mol

Molar mass of O = 16 g/mol

Molar mass of N = 14 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of C}=\frac{59.0g}{12g/mol}=4.917 mol[/tex]

[tex]\text{Moles of H}=\frac{7.15g}{1g/mol}=7.15 mol[/tex]

[tex]\text{Moles of O}=\frac{26.20g}{16g/mol}=1.6375 mol[/tex]

[tex]\text{Moles of N}=\frac{7.65g}{14g/mol}=0.546 mol[/tex]

Calculating the mole fraction of each element by dividing the calculated moles by the least calculated number of moles that is 0.546 moles

[tex]\text{Mole fraction of C}=\frac{4.917}{0.546 }=9[/tex]

[tex]\text{Mole fraction of H}=\frac{7.15}{0.546 }=13[/tex]

[tex]\text{Mole fraction of O}=\frac{1.6375}{0.546 }=2.99\approx 3[/tex]

[tex]\text{Mole fraction of N}=\frac{0.546}{0.546 }=1[/tex]

The ratio of C : H : O : N = 9 : 13 : 3 : 1

The empirical formula of the compound becomes [tex]C_9H_{13}O_3N_1=C_9H_{13}O_3N[/tex]

To calculate the molecular formula, the number of atoms of the empirical formula is multiplied by a factor known as valency that is represented by the symbol, 'n'.

[tex]n =\frac{\text{Molecular mass}}{\text{Empirical mass}}[/tex] .....(2)

We are given:

Mass of molecular formula = 183 g/mol

Mass of empirical formula = 183 g/mol

Putting values in equation 2, we get:

[tex]n=\frac{183g/mol}{183g/mol}=1[/tex]

Multiplying this valency by the subscript of every element of empirical formula, we get:

[tex]C_{1\times 9}H_{1\times 13}O_{1\times 3}N_{1\times 1}=C_9H_{13}O_3N[/tex]

Hence, the empirical and molecular formula for the given organic compound is [tex]C_9H_{13}O_3N[/tex]

Answer:

The mole is defined as a collection of 6.022 × 1023 particles.

The atomic mass given on a periodic table that is given in grams is the mass of

one mole (6.022 × 1023 particles) of that element

Explanation:

Answer:

[tex]4.67\times 10^{-4}[/tex]

Explanation:

Given that,

The pH of a certain orange juice is 3.33.

We need to find the +ion concentration.

We know that,

[tex]pH=-log[H^+][/tex]

So,

[tex]3.33=-log[H^+]\\\\\[H^+=10^{-3.33}\\\\=4.67\times 10^{-4}[/tex]

So, the +ion concentraion is equal to [tex]4.67\times 10^{-4}[/tex].

Answer:

Ionic compounds conduct electricity when molten (liquid) or in aqueous solution (dissolved in water), because their ions are free to move from place to place. Ionic compounds cannot conduct electricity when solid, as their ions are held in fixed positions and cannot move.

Explanation:

because their ions are free to move from place to place.

Answer:

[tex]m_{HCl}=36.1gHCl[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to calculate the required grams of HCl by firstly identifying the limiting reactant via the moles of each reactant as they are in a 1:1 mole ratio:

[tex]n_{H_2}=1.00gH_2*\frac{1molH_2}{2.02gH_2}=0.500molH_2\\\\ n_{Cl_2}=55.0gCl_2*\frac{1molCl_2}{70.9gCl_2}=0.776molCl_2[/tex]

Thus, we infer the hydrogen is the limiting reactant and therefore we use its 1:2 mole ratio with HCl whose molar mass is 36.46 g/mol:

[tex]m_{HCl}=0.500molH_2*\frac{2molHCl}{1molH_2}*\frac{36.46gHCl}{1molHCl}\\\\m_{HCl}=36.1gHCl[/tex]

Regards!

Answer:

A

Explanation:

Answer:

LIBs have had a huge impact on our society. They enabled modern portable electronics such as laptops and mobile phones. And they are now enabling clean and low-carbon transport, be it via electric cars or even flying taxis, and grid-scale storage of renewable energy

Explanation:

Answer:

H2O.....................

Answer:

very warm water consuving

Answer:

it's B

Explanation:

Write the balanced equation: H2SO4 + 2KOH → K2SO4 +2H2O. So 2(moles KOH) = (moles H2SO4); 2(volume KOH)(concentration KOH) = (volume H2SO4)(concentration H2SO4); 2(40ml)(0.2M) = (30ml)(x); x = 0.53M

The concentration of  H₂SO₄ solution is equal to 0.133 M.

A neutralization reaction can be described as a chemical reaction in which an acid and base react together to form respective salt and water. When a strong acid such as HCl will react with a strong base such as NaOH the salt can be neither acidic nor basic.

When H₂SO₄ (a strong acid) reacts with KOH, the resulting salt will be  K₂SO₄ and water.

H₂SO₄    +  2KOH   → K₂SO₄  +  2H₂O

Given, the concentration of KOH solution = 0.2 M

The volume of the KOH solution = 40 ml = 0.040 ml

The number of moles of KOH, n = M × V = 0.2 × 0.04 = 0.008 mol

The volume of the H₂SO₄ = 30 ml = 0.03 L

The number of moles of H₂SO₄, n = 0.008/2 = 0.004 mol

The concentration of  H₂SO₄ solution = 0.004/0.03 = 0.133 M

Learn more about neutralization reaction, here:

brainly.com/question/20038776

#SPJ2

Answer:

Gains

Explanation:

It gets more electrons

[tex]\large\colorbox{orange}{May Be Helpful ✌️ Dear ✌️}[/tex][tex]\large\colorbox{orange}{May Be Helpful ✌️ Dear ✌️}[/tex]

Answer:

MgO

Explanation:

Answer:

5 atoms form one formula unit of Fe2O3

Explanation:

2 atoms of Fe (Iron)

and 3 atoms of O ( Oxygen)

so total = 3 + 2

= 5

Answer:

fe203 the right answer is thus

Answer:

0.2 M

Explanation:

Step 1: Given data

There are different ways to express the concentration of a solution. We will calculate molarity, which is one of the most used.

Step 2: Calculate the moles of sucrose

The molar mass of sucrose is 342.3 g/mol.

15 g × 1 mol/342.3 g = 0.044 mol

Step 3: Calculate the molarity of the solution

Molarity is equal to the moles of solute divided by the liters of solution.

M = 0.044 mol/0.2 L = 0.2 M

Answer:

Identify the indicated protons in the following molecules as unrelated, homotopic, enantiotopic, or diastereotopic. a) Methyls a & b: _________ b) Ha & Hc: ________

Explanation:

Homotopic hydrogens:

Consider two hydrogens in the given molecule and replace one by one with a different atom say for example deuterium, then if the two molecules formed by replacing hydrogens are the same then the two hydrogens are called homotopic hydrogens.

After replacing the two hydrogens with a different atom then, enantiomers are formed then, the two hydrogens are called enantiotopic hydrogens.

After replacing the two hydrogens with a different atom then, diastereomers are formed then, the two hydrogens are called diastereotopic hydrogens.

In the methyl group, select two hydrogens and replace one hydrogen atom with a D-atom name the compound.

Again replace another hydrogen atom with D-atom.

Name it.

If both are the same then, the hydrogens are homotopic and they are shown below:

Hence, they are homotopic protons.

The question is incomplete, the complete question is:

A certain liquid X has a normal freezing point of [tex]0.80^oC[/tex] and a freezing point depression constant [tex]K_f=7.82^oC.kg/mol[/tex] . Calculate the freezing point of a solution made of 81.1 g of iron(III) chloride () dissolved in 850. g of X. Round your answer to significant digits.

Answer: The freezing point of the solution is [tex]-17.6^oC[/tex]

Explanation:

Depression in the freezing point is defined as the difference between the freezing point of the pure solvent and the freezing point of the solution.

The expression for the calculation of depression in freezing point is:

[tex]\text{Freezing point of pure solvent}-\text{freezing point of solution}=i\times K_f\times m[/tex]

OR

[tex]\text{Freezing point of pure solvent}-\text{Freezing point of solution}=i\times K_f\times \frac{m_{solute}\times 1000}{M_{solute}\times w_{solvent}\text{(in g)}}[/tex] ......(1)

where,

Freezing point of pure solvent = [tex]0.80^oC[/tex]

Freezing point of solution = [tex]?^oC[/tex]

i = Vant Hoff factor = 4 (for iron (III) chloride as 4 ions are produced in the reaction)

[tex]K_f[/tex] = freezing point depression constant = [tex]7.82^oC/m[/tex]

[tex]m_{solute}[/tex] = Given mass of solute (iron (III) chloride) = 81.1 g

[tex]M_{solute}[/tex] = Molar mass of solute (iron (III) chloride) = 162.2 g/mol

[tex]w_{solvent}[/tex] = Mass of solvent (X) = 850. g

Putting values in equation 1, we get:

[tex]0.8-(\text{Freezing point of solution})=4\times 7.82\times \frac{81.1\times 1000}{162.2\times 850}\\\\\text{Freezing point of solution}=[0.8-18.4]^oC\\\\\text{Freezing point of solution}=-17.6^oC[/tex]

Hence, the freezing point of the solution is [tex]-17.6^oC[/tex]

Answer:

The volume of the sample is 17.4L

Explanation:

The reaction that occurs requires the same amount of CO and NO. As the moles added of both reactants are the same you don't have any limiting reactant. The only thing we need is the reaction where 4 moles of gases (2mol CO + 2mol NO) produce 3 moles of gases (2mol CO2 + 1mol N2). The moles produced are:

0.1800mol + 0.1800mol reactants =

0.3600mol reactant * (3mol products / 4mol reactants) = 0.2700 moles products.

Using Avogadro's law (States the moles of a gas are directly proportional to its pressure under constant temperature and pressure) we can find the volume of the products:

V1n2 = V2n1

Where V is volume and n moles of 1, initial state and 2, final state of the gas

Replacing:

V1 = 23.2L

n2 = 0.2700 moles

V2 = ??

n1 = 0.3600 moles

23.2L*0.2700mol = V2*0.3600moles

17.4L = V2

Answer:

INCREASE in the difference between the melting point measured and the true melting temperature.

Explanation:

Melting point of a compound is defined as the temperature at which the soils compound changes into liquid at the atmospheric pressure. There are different circumstances that can lead to inaccurate melting point. These include:

--> presence of impurities in the compound,

--> Molecular composition,

--> Force of attraction, and

--> Rapid heating of the compound.

Under the circumstances of rapid heating of the compound, there would be an increase in the melting point range when compared with the true melting point range of the compound.

The higher the heating rate, the more rapid the rise in oven temperature, increasing the difference between the melting point measured and the true melting temperature.