Starting with the Ideal Gas Law, show that the relationship between volume and temperature in an adiabatic process is the one given by :

TfVf^γ^-1 = TiVi^γ-1 = Constant

Answer:

[tex]$\frac{d}{\lambda} = 1.54$[/tex]

Explanation:

Given :

The first dark fringe is for m = 0

[tex]$\theta_1 = \pm 19^\circ$[/tex]

Now we know for a double slit experiments , the position of the dark fringes is give by :

[tex]$d \sin \theta=\left(m+\frac{1}{2}\right) \lambda$[/tex]

The ratio of distance between the two slits, d to the light's wavelength that illuminates the slits, λ :

[tex]$d \sin \theta=\left(\frac{1}{2}\right) \lambda$[/tex]     (since, m = 0)

[tex]$d \sin \theta=\frac{\lambda}{2}$[/tex]

[tex]$\frac{d}{\lambda} = \frac{1}{2 \sin \theta}$[/tex]

[tex]$\frac{d}{\lambda} = \frac{1}{2 \sin 19^\circ}$[/tex]

[tex]$\frac{d}{\lambda} = 1.54$[/tex]

Therefore, the ratio is [tex]$\frac{1}{1.54}$[/tex]  or 1 : 1.54

Solution :

It is given that a car ran off from a cliff and it crashes on canyon floor. Now the system of a car as well as the earth together have a  [tex]\text{ net momentum of zero}[/tex] when the car crashes on the canyon floor, thus reducing the momentum of the car to zero. The earth also stops its upward motion and it also reduces the momentum to zero.

Answer:

Explanation:

From the given information:

mass = 64 kg

speed = 3.2 m/s

coefficient of friction [tex]\mu =[/tex] 0.70

The mechanical energy touted relates to the loss of energy in the system as a result of friction and this can be computed as:

[tex]W = \Delta K.E[/tex]

[tex]\implies \dfrac{1}{2}m(v^2 -u^2)[/tex]

[tex]= \dfrac{1}{2}(64.0 \kg) (0 - (3.2 \ m/s^2))[/tex]

Thus, the mechanical energy touted = 327.68 J

According to the formula used in calculating the frictional force

[tex]F_r = \mu mg[/tex]

= 0.70 × 64  kg× 9.8 m/s²

= 439.04 N

The distance covered now can be determined as follows:

d = W/F

d = 327.68 J/  439.04 N

d = 0.746 m

the simple answer is from 61kmph to 120kmph

Explanation:

no explanation is needed

Answer:

The height is the same

Explanation:

Because they were at the same height but they fell at different velocities

Answer:

Option C. 0.73 g/cm³

Explanation:

From the question given above, the following data were obtained:

Mass = 80 g

Area (A) = 10000 cm²

Thickness = 0.11 mm

Density =?

Next, we shall convert 0.11 mm to cm. This can be obtained as follow:

10 mm = 1 cm

Therefore,

0.11 mm = 0.11 mm × 1 cm / 10 mm

0.11 mm = 0.011 cm

Thus, 0.11 mm is equivalent to 0.011 cm.

Next, we shall determine the volume of the paper. This can be obtained as follow:

Area (A) = 10000 cm²

Thickness = 0.011 cm

Volume =?

Volume = Area × Thickness

Volume = 10000 × 0.011

Volume = 110 cm³

Finally, we shall determine the density of the paper. This can be obtained as follow:

Mass = 80 g

Volume = 110 cm³

Density =?

Density = mass / volume

Density = 80 / 110

Density = 0.73 g/cm³

Therefore the density of the paper is 0.73 g/cm³

Explanation:

hope it helps !!!!!!!!!!!!!

If an object of a constant mass experiences a constant net force, it will have a constant acceleration.

The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.

The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force. A spring balance can be used to calculate the Force. The Newton is the SI unit of force.

According to Newton's second law of motion:

Applied force = mass × acceleration.

Hence, if an object of a constant mass experiences a constant net force, it will have a constant acceleration.

Learn more about force here:

https://brainly.com/question/26115859

#SPJ6

Answer:

Explanation:

a)

v² = u² + 2 a s

v = 9 m/s

u = 4 m/s

s = 50 m

9² = 4² + 2 x a x 50

a = 0.65 m /s²

Acceleration is 0.65 m /s²

b )  

time elapsed before velocity changed from 4 m/s to 9 m/s with acceleration of .65 m /s ²

(v - u ) / t = a

(v - u ) / a = t

(9 - 4 ) / .65 = t

t = 7.7

time when passing the first sign will be 7.7 s earlier .

Reading of time indicator = 45 - 7.7

= 37.3 seconds.

Answer:

(a) 0.45 m/s^2

(b) 33.9 s

Explanation:

initial velocity, u = 4 m/s

final velocity, v = 9 m/s

distance, s = 50 m

(a) Let the acceleration is a.

Use third equation of motion

[tex]v^2 = u^2 + 2 as \\\\9^2 = 4^2 + 2\times a\times 50\\\\a = 0.45 m/s^2[/tex]

(b) Let the time is t.

Use first equation of motion

v = u + at

9 = 4 + 0.45 x t

t = 11.1 s

So, the initial time, t' = 45 - 11.1 = 33.9 s  

Answer:

elative magnitude of the two forces is the same and they are applied in a constant direction.

Explanation:

Newton's second law states that the sum of the forces is equal to the mass times the acceleration  

              ∑ F = m a

in this case there are two forces on the x axis

             F_applied - fr = 0

since they indicate that the velocity is constant, consequently

             F_applied = fr

the relative magnitude of the two forces is the same and they are applied in a constant direction.

Answer:

  K_b = 78 J

Explanation:

For this exercise we can use the conservation of energy relations

starting point. Lowest of the trajectory

        Em₀ = K = ½ mv²

final point. When it is at tea = 50º

        Em_f = K + U

        Em_f = ½ m v_b² + m g h

where h is the height from the lowest point

        h = L - L cos 50

        Em_f = ½ m v_b² + mg L (1 - cos50)

energy be conserve

        Em₀ = Em_f

         ½ mv² = ½ m v_b² + mg L (1 - cos50)

         K_b = ½ m v_b² + mg L (1 - cos50)

let's calculate

          K_b = ½ 2.0 6.0² + 2.0 9.8 6.0 (1 - cos50)

          K_b = 36 +42.0

          K_b = 78 J

Answer:

Step down transformers are used in power adaptors and rectifiers to efficiently decrease the voltage. They are also used in electronic SMPS.

Explanation:

pls mark me as brainlist

Thanks a lot

Answer:

a. i. 0.542 A ii. 8.813 W iii. 0.542 A iv. 25.85 W

b. i. 2.13 A ii. 136.53 W iii. 0.727 A iv. 46.55 W

Explanation:

a. Find the current (in A) and power (in W) for each when connected in series.

Since the resistors are connected in series, their combined resistance is R = R₁ + R₂ where R₁ = 30.0 Ω and R₂ = 88.0 Ω.

So, substituting the values of the variables into the equation, we have

R = R₁ + R₂

R =  30.0 Ω +  88.0 Ω

R =  118.0 Ω

Since from Ohm's law, V = IR where V = voltage across circuit = battery voltage = 64.0 V, I = current in circuit and R = total resistance of circuit = 118.0 Ω

So, I = V/R = 64.0V/118.0 Ω = 0.542 A

Since the resistors are in series, the same current flows through them

i. Current in 30.0 Ω

Current in 30.0 Ω is I = 0.542 A since the resistors are in series.

ii Power in the 30.0 Ω

The power in the 30.0 Ω is P₁ = I²R₁ where I = current = 0.542 A and R₁ = resistance = 30.0 Ω

So, P₁ = I²R₁

= (0.542 A)² × 30.0 Ω

= 0.293764  A² × 30.0 Ω

= 8.8129 W

≅ 8.813 W

iii. Current in 88.0 Ω

Current in 88.0 Ω is I = 0.542 A since the resistors are in series.

iv. Power in the 88.0 Ω

The power in the 88.0 Ω is P = I²R₂ where I = current = 0.542 A and R₂ = resistance = 88.0 Ω

So, P₂ = I²R₂

= (0.542 A)² × 88.0 Ω

= 0.293764  A² × 88.0 Ω

= 25.8512 W

≅ 25.85 W

(b) Repeat when the resistances are in parallel.

Since the resistors are connected in parallel, the same voltage is applied across them.

i. Current in 30.0 Ω

Using Ohm's law, V = I₁R₁ where V = voltage = 64.0 V, I₁ = current in 30.0 Ω resistor and R₁ = resistance = 30.0 Ω

So, I₁ = V/R₁ = 64.0 V/30.0 Ω = 2.13 A

ii Power in the 30.0 Ω

The power in the 30.0 Ω resistor is P₁ = V²/R₁ where V = voltage across resistor = 64.0 V and R₁ = resistance = 30.0 Ω

So, P₁ = V²/R₁

P₁ = (64.0 V)²/30.0 Ω

P₁ = 4096 V²/30.0 Ω

P₁ = 136.53 W

iii. Current in 88.0 Ω

Using Ohm's law, V = I₂R₂ where V = voltage = 64.0 V, I₂ = current in 88.0 Ω resistor and R₂ = resistance = 88.0 Ω

So, I₂ = V/R₂ = 64.0 V/88.0 Ω = 0.727 A

iv. Power in the 88.0 Ω

The power in the 30.0 Ω resistor is P₂ = V²/R₂ where V = voltage across resistor = 64.0 V and R₂ = resistance = 88.0 Ω

So, P₂ = V²/R₂

P₂ = (64.0 V)²/88.0 Ω

P₂ = 4096 V²/88.0 Ω

P₂ = 46.55 W

Answer:

the relation between the time period of the planet is

T = 2π √[( r1 + r2 )³ / 8GM ]

Explanation:

Given the data i  the question;

mass of sun = M

minimum and maximum distance = r1 and r2 respectively

Now, using Kepler's third law,

" the square of period T of any planet is proportional to the cube of average distance "

T² ∝ R³

average distance a = ( r1 + r2 ) / 2

we know that

T² = 4π²a³ / GM

T² = 4π² [( ( r1 + r2 ) / 2 )³ / GM ]

T² = 4π² [( ( r1 + r2 )³ / 8 ) / GM ]

T² = 4π² [( r1 + r2 )³ / 8GM ]

T = √[ 4π² [( r1 + r2 )³ / 8GM ] ]

T = 2π √[( r1 + r2 )³ / 8GM ]

Therefore, the relation between the time period of the planet is

T = 2π √[( r1 + r2 )³ / 8GM ]

Answer:

(I)

[tex]{ \bf{s = ut + \frac{1}{2}a {t}^{2} }} \\ 120 = (u \times 2) + \frac{1}{2} \times 0 \times {2}^{2} \\ 120 = 2u \\ { \tt{speed = 60 \: {ms}^{ - 1} }}[/tex]

(ii)

[tex]{ \bf{s = ut + \frac{1}{2}a {t}^{2} }} \\ 240 = (60t) \\ { \tt{time = 4 \: seconds}}[/tex]

Explanation:

Forces on Block A:

Let the x-axis be (+) towards the right and y-axis be (+) in the upward direction. We can write the net forces on mass [tex]m_A[/tex] as

[tex]x:\:\:(F_{net})_x = f_N - T = -m_Aa\:\:\:\:\:\:\:(1)[/tex]

[tex]y:\:\:(F_{net})_y = N - m_Ag = 0 \:\:\:\:\:\:\:\:\:(2)[/tex]

Substituting (2) into (1), we get

[tex]\mu_km_Ag - T = -m_Aa \:\:\:\:\:\:\:\:\:(3)[/tex]

where [tex]f_N= \mu_kN[/tex], the frictional force on [tex]m_A.[/tex] Set this aside for now and let's look at the forces on [tex]m_B[/tex]

Forces on Block B:

Let the x-axis be (+) up along the inclined plane. We can write the forces on [tex]m_B[/tex] as

[tex]x:\:\:(F_{net})_x = T - m_B\sin30= -m_Ba\:\:\:\:\:\:\:(4)[/tex]

[tex]y:\:\:(F_{net})_y = N - m_Bg\cos30 = 0 \:\:\:\:\:\:\:\:\:(5)[/tex]

From (5), we can solve for N as

[tex]N = m_B\cos30 \:\:\:\:\:\:\:\:\:(6)[/tex]

Set (6) aside for now. We will use this expression later. From (3), we can see that the tension T is given by

[tex]T = m_A( \mu_kg + a)\:\:\:\:\:\:\:\:\:(7)[/tex]

Substituting (7) into (4) we get

[tex]m_A(\mu_kg + a) - m_Bg\sin 30 = -m_Ba[/tex]

Collecting similar terms together, we get

[tex](m_A + m_B)a = m_Bg\sin30 - \mu_km_Ag[/tex]

or

[tex]a = \left[ \dfrac{m_B\sin30 - \mu_km_A}{(m_A + m_B)} \right]g\:\:\:\:\:\:\:\:\:(8)[/tex]

Putting in the numbers, we find that [tex]a = 1.4\:\text{m/s}[/tex]. To find the tension T, put the value for the acceleration into (7) and we'll get [tex]T = 21.3\:\text{N}[/tex]. To find the force exerted by the inclined plane on block B, put the numbers into (6) and you'll get [tex]N = 50.9\:\text{N}[/tex]

Explanation:

https://tse2.mm.bing.net/th?id=OGC.b52c959ac810db1177599a161631c917&pid=Api&rurl=https%3a%2f%2fupload.wikimedia.org%2fwikipedia%2fcommons%2fthumb%2ff%2ff5%2fLight_dispersion_conceptual_waves.gif%2f266px-Light_dispersion_conceptual_waves.gif&ehk=TdcWPzr5xGP8xUOSOqZXauGOS1jHDMu7WnxPzkl7esw%3d

Complete question is;

A microwave oven operates at a frequency of 2400 MHz. The height of the oven cavity is 25 cm and the base measures 30 cm by 30 cm. Assume that microwave energy is generated uniformly on the upper surface of the cavity and propagates directly

downward toward the base. The base is lined with a material that completely absorbs microwave energy. The total microwave energy content of the cavity is 0.50 mJ.

Answer:

Power ≈ 600,000 W

Explanation:

We are given;

Frequency; f = 2400 Hz

height of the oven cavity; h = 25 cm = 0.25 m

base area; A = 30 cm by 30 cm = 0.3m × 0.3m = 0.09 m²

total microwave energy content of the cavity; E = 0.50 mJ = 0.5 × 10^(-3) J

We want to find the power output and we know that formula for power is;

P = workdone/time taken

Formula for time here is;

t = h/c

Where c is speed of light = 3 × 10^(8) m/s

Thus;

t = 0.25/(3 × 10^(8))

t = 8.333 × 10^(-10) s

Thus;

Power = (0.5 × 10^(-3))/(8.333 × 10^(-10))

Power ≈ 600,000 W

Answer:

i think the answer is 0.001m³

By Newton's second law,

• the net force acting vertically on the crate is 0, and

∑ F = n - mg = 0   ==>   n = mg = 1470 N

where n is the magnitude of the normal force; and

• the net force acting in the horizontal direction on the crate is also 0, with

∑ F = f - b = 0   ==>   b = f = µn = 0.645 (1470 N) = 948.15 N

where b is the magnitude of the braking force, f is (the maximum) static friction, and µ is the coefficient of static friction. This is to say that static friction has a maximum magnitude of 948.15 N. If the brakes apply a larger force than this, then the crate will begin to slide.

Note that we are taking the direction of the truck's motion as it slows down to be the positive horizontal direction. The brakes apply a force in the negative direction to slow down the truck-crate system, and static friction keeps the crate from sliding off the truck bed so that the frictional force points in the positive direction.

Let a be the acceleration felt by the crate due to either the brakes or friction. Use Newton's second law again to solve for a :

f = ma   ==>   a = (948.15 N) / (150.0 kg) = 6.321 m/s²

With this acceleration, the truck will come to a stop after time t such that

0 = 50.0 km/h - (6.321 m/s²) t   ==>   t ≈ (13.9 m/s) / (6.321 m/s²) ≈ 2.197 s

and this is the smallest stopping time possible.

Answer:

0

Explanation:

a = dv/dt

if v is constant than the slope of the v graph will be 0, so dv/dt is 0

a= 0

Answer:

c)  N_s / N_p = 115.15

Explanation:

Let's look for the voltage in the secondary, they do not indicate the power dissipated

          P = V_s i

          V_s = P / i

          V_s = 76 / 5.5 10⁻³

          V_s = 13.818 10³ V

the relationship between the primary and secondary of a transformer is

           [tex]\frac{V_p}{N_p} = \frac{V_s}{N_s}[/tex]

           [tex]\frac{N_s}{N_p} = \frac{V_s}{V_p}[/tex]

           Ns / Np = 13,818 10³ /120

           N_s / N_p = 115.15

Relative density is the ratio of the density of a substance to the density of a given material.

Answer:

Power = Energy/time

Energy = Power xtime.

Time= 20hrs

Power = 100Watt =0.1Kw

Energy = 0.1 x 20 = 2Kwhr.

This Answer is in Kilowatt-hour ...

If the one given to you is in Joules

You'd have to Change your time to seconds

Then Multiply it by the power of 100Watts.

Explanation:

The initial kinetic energy [tex]KE_0[/tex] is

[tex]KE_0 = \frac{1}{2}m_0v_0^2[/tex]

When its mass and velocity are doubled, its new kinetic energy KE is

[tex]KE = \frac{1}{2}(2m_0)(2v_0)^2 = \frac{1}{2}(2m_0)(4v_0^2)[/tex]

[tex]\:\:\:\:\:\:\:= 8 \left(\frac{1}{2}m_0v_0^2 \right)= 8KE_0[/tex]

Therefore the kinetic energy will increase by a factor of 8.

Answer:

59.26°

Explanation:

Since a is the acceleration of the particle B, the horizontal component of acceleration is a" = asinθ and the vertical component is a' = acosθ where θ angle between a with arrow and the positive direction of the y axis.

Now, for particle B to collide with particle A, it must move vertically the distance between A and B which is y = 31 m in time, t.

Using y = ut + 1/2a't² where u = initial velocity of particle B = 0 m/s, t = time taken for collision, a' = vertical component of particle B's acceleration =  acosθ.

So, y = ut + 1/2a't²

y = 0 × t + 1/2(acosθ)t²

y = 0 + 1/2(acosθ)t²

y = 1/2(acosθ)t²   (1)

Also, both particles must move the same horizontal distance to collide in time, t.

Let x be the horizontal distance,

x = vt (2)where v = velocity of particle A = 2.8 m/s and t = time for collision

Also,  using x = ut + 1/2a"t² where u = initial velocity of particle B = 0 m/s, t = time taken for collision, a" = horizontal component of particle B's acceleration =  asinθ.

So, x = ut + 1/2a"t²

x = 0 × t + 1/2(ainsθ)t²

x = 0 + 1/2(asinθ)t²

x = 1/2(asinθ)t²  (3)

Equating (2) and (3), we have

vt = 1/2(asinθ)t²   (4)

From (1) t = √[2y/(acosθ)]

Substituting t into (4), we have

v√[2y/(acosθ)] = 1/2(asinθ)(√[2y/(acosθ)])²  

v√[2y/(acosθ)] = 1/2(asinθ)(2y/(acosθ)  

v√[2y/(acosθ)] = ytanθ

√[2y/(acosθ)] = ytanθ/v

squaring both sides, we have

(√[2y/(acosθ)])² = (ytanθ/v)²

2y/acosθ = (ytanθ/v)²

2y/acosθ = y²tan²θ/v²

2/acosθ = ytan²θ/v²

1/cosθ = aytan²θ/2v²

Since 1/cosθ = secθ = √(1 + tan²θ) ⇒ sec²θ = 1 + tan²θ ⇒ tan²θ = sec²θ - 1

secθ = ay(sec²θ - 1)/2v²

2v²secθ = aysec²θ - ay

aysec²θ - 2v²secθ - ay = 0

Let secθ = p

ayp² - 2v²p - ay = 0

Substituting the values of a = 0.35 m/s, y = 31 m and v = 2.8 m/s into the equation, we have

ayp² - 2v²p - ay = 0

0.35 × 31p² - 2 × 2.8²p - 0.35 × 31 = 0

10.85p² - 15.68p - 10.85 = 0

dividing through by 10.85, we have

p² - 1.445p - 1 = 0

Using the quadratic formula to find p,

[tex]p = \frac{-(-1.445) +/- \sqrt{(-1.445)^{2} - 4 X 1 X (-1)}}{2 X 1} \\p = \frac{1.445 +/- \sqrt{2.088 + 4}}{2} \\p = \frac{1.445 +/- \sqrt{6.088}}{2} \\p = \frac{1.445 +/- 2.4675}{2} \\p = \frac{1.445 + 2.4675}{2} or p = \frac{1.445 - 2.4675}{2} \\p = \frac{3.9125}{2} or p = \frac{-1.0225}{2} \\p = 1.95625 or -0.51125[/tex]

Since p = secθ

secθ = 1.95625 or secθ = -0.51125

cosθ = 1/1.95625 or cosθ = 1/-0.51125

cosθ = 0.5112 or cosθ = -1.9956

Since -1 ≤ cosθ ≤ 1 we ignore the second value since it is less than -1.

So, cosθ = 0.5112

θ = cos⁻¹(0.5112)

θ = 59.26°

So, the angle between a with arrow and the positive direction of the y axis would result in a collision is 59.26°.

Answer:

Option A. –5 m/s²

Explanation:

From the question given above, the following data were obtained:

Initial velocity (v₁) = 9 m/s

Initial time (t₁) = 0 s

Final velocity (v₂) = –6 m/s

Final time (t₂) = 3 s

Acceleration (a) =?

Next, we shall determine the change in the velocity and time. This can be obtained as follow:

For velocity:

Initial velocity (v₁) = 9 m/s

Final velocity (v₂) = –6 m/s

Change in velocity (Δv) =?

ΔV = v₂ – v₁

ΔV = –6 – 9

ΔV = –15 m/s

For time:

Initial time (t₁) = 0 s

Final time (t₂) = 3 s

Change in time (Δt) =?

Δt = t₂ – t₁

Δt = 3 – 0

Δt = 3 s

Finally, we shall determine the acceleration of the object. This can be obtained as follow:

Change in velocity (Δv) = –15 m/s

Change in time (Δt) = 3 s

Acceleration (a) =?

a = Δv / Δt

a = –15 / 3

a = –5 m/s²

Thus, the acceleration of the object is

–5 m/s².

Answer:

KE = 2800 J

Explanation:

Usually a velocity is expressed as m/s. Then the energy units are joules.

[tex]\frac{108 km}{hr} * \frac{1000m}{1 km} * \frac{1 hour}{3600 seconds} =\frac{108*1000 m}{3600sec}[/tex]

v = 30 m / sec

KE = 1/2 * 4 * (30)^2

KE =2800 kg m^2/sec^2

KE = 2800 Joules

Answer:

17.8cm

Explanation:

1.3kg --> 4cm

1kg --> 3, 1/13cm

5.8kg --> 18.8cm

Answer:

North

Explanation:

Friction is a reaction force against the direction of movement. So since the direction of movement is south the friction would be opposite and move north.

Answer:

South To North

Explanation:

Frictional force acts in the direction opposite to the direction of motion of a body. Because the object is moving from north to south, the direction of frictional force is from south to north

Answer:

64.20m

Explanation:

As we can see from the image I have attached below, the route that the chipanzee makes forms a right triangle. In this case, the shortest distance is represented by x in the image, which is the hypotenuse. To find this value we use the Pythagorean theorem which is the following.

[tex]a^{2} +b^{2} = c^{2}[/tex]

where a and b are the length of the two sides and c is the length of the hypotenuse (x). Therefore, we can plug in the values of the image and solve for x

[tex]51^{2} +39^{2} =x^{2}[/tex]

2,601 + 1,521 = [tex]x^{2}[/tex]

4,122 = [tex]x^{2}[/tex]   ... square root both sides

64.20 = x

Finally, we see that the shortest distance is 64.20m