Student A can solve 75% of problems, student B can solve 70%. What is the probability that A or B can solve a problem chosen at random?

Answer:

1. The graphs of f(x) and h(x) are both quadratic functions with a minimum point. However, the minimum point of f(x) is located at (6,0), while the minimum point of h(x) is located at (2,3).

2. The graphs of g(x) and h(x) both open upwards and are quadratic functions. However, the vertex of g(x) is located at the origin (0,0), while the vertex of h(x) is located at (2,3).

3. The graph of g(x) is a simple parabola that opens upwards, while the graphs of f(x) and h(x) are more complex parabolas with a minimum point and an upward opening. The graph of f(x) is centered at (6,0), while the graph of h(x) is centered at (2,3).

Answer: 4x(x - 4)

Step-by-step explanation:

4x² - 16x = 4x(x - 4)

Now we can see that the expression inside the parentheses can also be factored:

x - 4 = (x - 4)

So the fully factorized expression is:

4x² - 16x = 4x(x - 4) = 4x(x - 4)

Answer:

ㅤ

- 4x( x + 4 )

ㅤ

Step-by-step explanation:

ㅤ

[tex]\large{\pmb{\sf{ - 4x^{2} - 16x}}}[/tex]

ㅤ

[tex]\large{\underline{\underline{\sf{Taking \: Out \: {\green{4}} \: As \: Common:-}}}}[/tex]

ㅤ

[tex]\large{\pmb{\sf{\leadsto{- 4(x^{2} + 4x)}}}}[/tex]

ㅤ

[tex]\large{\underline{\underline{\sf{Taking \: Out \: {\green{x}} \: As \: Common:-}}}}[/tex]

ㅤ

[tex]\large{\purple{\boxed{\pmb{\sf{\leadsto{- 4x(x + 4)}}}}}}[/tex]

━━━━━━━━━━━━━━━━━━━━━━

[tex]\star \: {\large{\underline{\underline{\pink{\mathfrak{More:-}}}}}} \: \star[/tex]

ㅤ

[tex]\large{\dashrightarrow}[/tex] Two positive always makes positive sign when multiplied.

ㅤ

[tex]\large{\dashrightarrow}[/tex] Two negatives always makes positive sign when multiplied.

ㅤ

[tex]\large{\dashrightarrow}[/tex] A positive and a negative always makes negative sign when multiplied.

ㅤ

[tex]\large{\dashrightarrow}[/tex] The sum of two positives is always positive with a positive sign.

ㅤ

[tex]\large{\dashrightarrow}[/tex] The sum of two negatives is always positive with a negative sign.

ㅤ

[tex]\large{\dashrightarrow}[/tex] The sum of a positive and a negative is always negative with the sign of whose number is greater.

The rounded value of 25.71 to 2 decimal places is 25.71 itself.

To round 25.71 to 2 decimal places, we need to look at the third decimal place, which is 1.

If the third decimal place is 5 or greater, we round up the second decimal place. If the third decimal place is less than 5, we simply drop it and keep the second decimal place as is.

In this case, the third decimal place is 1, which is less than 5, so we simply drop it and keep the second decimal place as is. Therefore, 25.71 rounded to 2 decimal places is:

25.71 ≈ 25.71 (no rounding necessary)

So, the rounded value of 25.71 to 2 decimal places is 25.71 itself.

Learn more about decimal at https://brainly.com/question/703656

#SPJ1

Leo might therefore have 36 or 48 toy soldiers, which is a choice between the two numbers.

The attempt to demonstrate that your integer is larger than anyone else's integer has persisted through the ages, despite their being more numbers than there are atoms in the universe. The largest number that is frequently used is a googolplex (10googol), which equals 101¹⁰⁰.

We'll name Leo's collection of toy soldiers "x" the amount. We are aware of:

We can infer x to be one of the following figures from the first condition: 28, 32, 36, 40, 44, 48, or 52.

To find out which of these integers meets the other two requirements, we can try each one individually:

x + 6 = 34 and x + 3 = 31, neither of which is a multiple of five, if x = 28.

X + 6 = 38 and X + 3 = 35, none of which is a multiple of 5, follow if x = 32.

When x = 36, x + 6 = 42, a multiple of 7, and x + 3 = 39, a multiple of 5, follow. This might be the answer.

x + 6 = 46 and x + 3 = 43, neither of which is a multiple of five, if x = 40.

x + 6 = 50 and x + 3 = 47, neither of which is a multiple of five, if x = 44.

When x = 48, x + 6 = 54, a multiple of 7, and x + 3 = 51, a multiple of 5, follow.

x + 6 = 58 and x + 3 = 55, neither of which is a multiple of five, if x = 52.

To know more about two numbers visit:-

https://brainly.com/question/1814627

#SPJ1

Answer: Mike is ( 3x + 4 ) years old

Step-by-step explanation:

K -> x y/o

L -> 3x y/o

M -> (3x + 4) y/o

The sampling approach that was used in the statement "Kane randomly sampled 250 nurses from urban areas and 250 from rural areas from a list of licensed nurses in Wisconsin to study their attitudes toward evidence-based practice" is Stratified random sampling.

Stratified random sampling is a method of sampling that is based on dividing the population into subgroups called strata. Stratified random sampling is a statistical sampling method that involves the division of the population into subgroups or strata, and a sample is then drawn from each stratum in proportion to the size of the stratum. It's a sampling method that ensures the representation of all population strata in the sample, making it more effective than simple random sampling.

Stratified random sampling is used when there are variations in the population that are likely to influence the outcome of the study. The stratified random sampling method is used to ensure that these differences are reflected in the sample. In this way, the results of the study are more representative of the entire population than they would be if a simple random sample were used.

Learn more about Stratified random sampling here: https://brainly.com/question/20544692.

#SPJ11

Answer:

2 + r = 6

Step-by-step explanation:

2 + r = 6

r = 6 - 2 = 4

6 on the left balanced by 2 plus r on the right

a) Option A, A x2 statistic provides strong evidence in favor alternative hypothesis if its value is a large positive number.

b) Option B, The null hypothesis that sex and personal goals are not related vs. the alternative hypothesis that sex and personal goals are related.

c) Option B, The variables considered in a chi-squared test used to evaluate a contingency table B. are categorical.

(a) A x2 statistic provides strong evidence in favor of the alternative hypothesis if its value is a large positive number. The x2 statistic is used in hypothesis testing to determine whether there is a significant difference between observed and expected frequencies. A large positive value indicates that the observed frequencies are significantly different from the expected frequencies, which supports the alternative hypothesis.

(b) The hypotheses being tested in a chi-squared test on a contingency table are the null hypothesis that sex and personal goals are not related vs. the alternative hypothesis that sex and personal goals are related. This test determines whether there is a significant association between two categorical variables.

(c) The variables considered in a chi-squared test used to evaluate a contingency table are categorical. These variables cannot be averaged or assumed to be normally distributed. The chi-squared test is used to analyze the relationship between two or more categorical variables, where each variable has a discrete set of categories.

Learn more about statistics at

https://brainly.com/question/29093686

#SPJ4

Using proportions, the real height of the telephone mast is estimated to be 9 meters.

A proportion is a fraction of a total amount, and equations are constructed using these fractions and estimates to find the desired measures in the problem using basic arithmetic operations like multiplication and division. Because the telephone box and the mast are similar figures in this problem, their side lengths are proportional.

The following proportional relationship is established as a result:

x / 1.5 cm = 10.8 cm / 1.8 cm.

The relationship's left side can be simplified as follows:

6 = x / 1.5 cm.

The estimate is then calculated using cross multiplication, as shown below:

6 x 1.5 cm = 9.5 cm².

To know more about fraction, visit:

https://brainly.com/question/10354322

#SPJ1

Dan’s mistake is that he said the probability of Deshawn not doing basketball or not talking to friends after school is 35% which is not true.

Given:

Let’s consider the probability of Deshawn not doing basketball after school:Probability of Deshawn not doing basketball after school = 100% - Probability of Deshawn doing basketball after school= 100% - 20% = 80%

Similarly, let’s consider the probability of Deshawn not talking to friends after school: Probability of Deshawn not talking to friends after school = 100% - Probability of Deshawn talking to friends after school= 100% - 45% = 55% Probability of Deshawn doing neither basketball nor talking to friends after school:Probability of Deshawn not doing basketball after school * Probability of Deshawn not talking to friends after school= 80% * 55% = 44%

The probability of Deshawn doing either basketball or talking to friends after school is 65%, and the probability of Deshawn doing neither basketball nor talking to friends after school is 44%, which is greater than 35% which is Dans mistake. Hence, Dan’s mistake is that he said the probability of Deshawn not doing basketball or not talking to friends after school is 35% which is not true.

See more about probability at: https://brainly.com/question/24756209

#SPJ11

The definition of vector space that fails is part A and B  because it does not satisfy the any property of vector space.

The following statement can be determined if at-least one part of vector space definition that fails as:

(a) A is not a vector space because it does not contain the zero vector.

The zero vector is the unique vector that satisfies the property that when it is added to any other vector in the space, the result is the original vector.

However, in this case, the [a1, b1] + [a2, b2] = [a1 - a2, b1 - b2] is 0x² + 1, which is not an element of A. Therefore, A fails to satisfy the requirement of having a zero vector, and it is not a vector space.

(b) B is not a vector space because it does not satisfy the distributive property of scalar multiplication over vector addition.

In general, scalar multiplication must distribute over vector addition, meaning that for any scalar a and any vectors u and v in the space, a(u+v) = au + av.

However, in B, the scalar multiplication is defined as usual for R², but the vector addition is defined differently. In particular,[a1, b1] + [a2, b2] = [a1 - a2, b1 - b2].

The vector space definition fails because the vector addition is not associative, and it is also not commutative, which are the first two conditions for vector spaces. Therefore, the first and second conditions of the definition are not met.

To learn more about the vector space:

https://brainly.com/question/11383

#SPJ11

From the construction of the triangle ABC we get that the measure length of BC is approximately 4.22cm

To construct triangle ABC, we can follow these steps:

To measure the length of BC in triangle ABC, we can use the law of sines.

The law of sines states that in any triangle ABC:

a / sin(A) = b / sin(B) = c / sin(C)

Where a, b, and c are the lengths of the sides of the triangle opposite to the angles A, B, and C, respectively.

In our triangle ABC, we know AB = 6 cm, angle BAC = 96 degrees and angle ABC = 35 degrees. We can find the measure of angle ACB by using the fact that the sum of the angles in a triangle is 180 degrees:

angle ACB = 180 - angle BAC - angle ABC

= 180 - 96 - 35 = 49 degrees

Now, we can apply the law of sines to find the length of BC:

BC / sin(35) = 6 / sin(96)

BC = 6 × sin(35) / sin(96)

Using a calculator, we can evaluate this expression to get:

BC ≈ 4.22 cm

Therefore, the length of BC in triangle ABC is approximately 4.22 cm.

To learn more about triangle click here

brainly.com/question/2773823

#SPJ4

The set [1 0 −3 , −3 1 6 , 1 −1 0] is not a basis for set of real numbers R cubed(ℝ3).

The reason why it is not a basis is because it is not linearly independent. However, the set does span set of real numbers R cubed(ℝ3).To determine if the given set is a basis for set of real numbers R cubed(ℝ3), we need to test for linear independence and for span.Linear independence

The given set is said to be linearly independent if and only if the only solution to the equation a[1 0 −3] + b[−3 1 6] + c[1 −1 0] = [0 0 0] is the trivial solution where a, b and c are constants.If the given set is linearly independent then it is a basis for R3; if it is not linearly independent, it is not a basis for R3.

SpanThe given set is said to span R3 if every vector in R3 can be written as a linear combination of vectors in the given set.

If the given set spans R3, then it can be considered a basis for R3.For us to test if the given set is linearly independent, we can form a matrix by placing the three given vectors into the columns of a 3 x 3 matrix as follows:[1 0 1] [−3 1 −1] [−3 6 0]

By expanding the determinant of the matrix above, we get: det(A) = 0 - 0 - (-3) = 3

Since the determinant is non-zero, we can say that the given set is linearly independent. Since the given set is linearly independent, we can then use it to span R3. Hence the given set does not form a basis for R3 but it is linearly independent and spans R3.

To know more about linearly independent click on below link:

https://brainly.com/question/30720942#

#SPJ11

The equation representing total fraction strip is  ³/₃ + ¹/₃ = ⁴/₃.

option B.

A fraction is a mathematical representation of a part of a whole or a ratio between two numbers. It consists of a numerator, which represents the number of parts being considered, and a denominator, which represents the total number of parts in the whole.

For this case, 1 is divided into, and 1 divide into 3.

To obtain the total fractions, we will add the individual fractions as shown below;

For this first fraction = ¹/₃ + ¹/₃ + ¹/₃

For the second fraction = ¹/₃

Total fraction = 3(¹/₃ + ¹/₃ + ¹/₃) + ¹/₃

Total fraction = ³/₃ + ¹/₃ = ⁴/₃

Learn more about total fraction here: https://brainly.com/question/28699958

#SPJ1

Option (A) x+1 is a positive odd integer.

Given that, x < y < z and all three are consecutive non-zero integers.Let the first number be x, then the other two consecutive non-zero integers will be (x+1) and (x+2).To find out the positive odd integer among these, let us take each of them and verify if they are positive odd integers.∴ x+1 is odd, x+2 is even∴ x+1 is the only positive odd integer out of the three.

Learn more about Non-zero integers

brainly.com/question/2032387

#SPJ11

Maria's capital gain is 55.21%. Rounded to the nearest tenth of a percent, this is 55.2%.

To determine Maria's capital gain as a percent, we need to calculate the difference between the selling price and the purchase price, and then express this difference as a percentage of the purchase price.

The purchase price for 1,000 shares of stock was:

$35.50 x 1,000 = $35,500

The selling price for 1,000 shares of stock was:

$55.10 x 1,000 = $55,100

The capital gain is the difference between the selling price and the purchase price:

$55,100 - $35,500 = $19,600

To express this gain as a percentage of the purchase price, we divide the capital gain by the purchase price and multiply by 100:

($19,600 / $35,500) x 100 = 55.21%

In summary, to calculate the percent capital gain from the purchase and selling price of a stock, we simply divide the difference between the two prices by the purchase price and multiply by 100.

To learn more about capital gain click on,

https://brainly.com/question/28628208

#SPJ4

The claim of the production manager is not true because more than 4000 insulating washers are defective per day.

The total amount of insulating washer for the electrical devices produced per day = 225,000.

The amount chosen at random for sampling = 200 washers.

The amount shown to be defective in the chosen sample = 4

If every 200 = 4 defective

225,000 = X

Make c the subject of formula;

X = 225000×4/200

X = 900000/200

X = 4,500.

This shows that the claim is wrong because more than 4000 insulating washers are defective per day.

Learn more about random sampling here:

https://brainly.com/question/24466382

#SPJ1

The measure of the angle that it is complementary which is represented by 90-x is always true. Option A

An acute angle is simply defined as an angle that measures from 90° and 0°. This means that it is smaller than a right angle.

It is formed in the space between two intersecting lines or planes, or from the intersection of two shapes.

A complementary angle can be defined as a pair of angles whose sum is equal or equivalent to 90 degrees.

From the information given, we have that;

x is the acute angle

The complementary angle is 90 - x

We can see that the angle x must be complementary to be subtracted from 90 degrees.

Learn about acute angles at: https://brainly.com/question/28958927

#SPJ1

The complete question:

If the measure of an acute angle is represented by x, then the measure of its complement is represented by 90 – X.

always true

sometimes true

never true

The total number of pairwise comparisons for k is (k*(k-1))/2.

There are (k*(k-1))/2 pairwise comparisons in a completely randomized design with k treatments. For example, if there are 4 treatments, there will be 6 pairwise comparisons (4C2 = 6). Here's the explanation:In a completely randomized design, the treatments are randomly assigned to the experimental units. The main objective of such a design is to determine whether the treatment means are different from each other or not.To compare the treatment means, we use the mean square between treatments (MST) and mean square error (MSE). The test statistic used to compare the means is F = MST/MSE.The ANOVA table for a completely randomized design has the following format:Source of variationSum of SquaresDegrees of freedomMean SquareF-testtreatmentSS(k-1)k-1MST=MSTrMSEResidualSSTn-kMSEReference: https://www.stat.yale.edu/Courses/1997-98/101/anovar.htmNow, we need to compare each pair of treatments using a multiple comparisons procedure. A pairwise comparison involves comparing the means of two treatments only.The total number of pairwise comparisons is given by the combination formula:$$ \frac{k!}{2!(k-2)!} = \frac{k(k-1)}{2} $$Therefore, the total number of pairwise comparisons for k is (k*(k-1))/2.

Learn more about pairwise

brainly.com/question/30882986

#SPJ11

Answer:

Step-by-step explanation: In the problem, they tell us that

dL / dt = 7 cm/s (the rate at which the length is changing) and

dw / dt = 8 cm/s (the rate at which the width is changing)

Want dA/dt (the rate at which the area is changing) when L = 7 cm and w = 5 cm

The equation for the area of a rectangle is:

A = L·w, so will need the product rule when taking the derivative.

dA/dt = L (dw/dt) + w (dL/dt)

Now just plug in all of the given numbers:

dA/dt = (7)(7) + (5)(8) = 49+40 = 89  cm²/s

Answer:

Step-by-step explanation:

Let's use "n" to represent the number of slices in each pizza. Then the equation to describe the situation is:

999n = 727272

To solve for "n", we divide both sides by 999:

n = 727272/999

Using a calculator or long division, we get:

n ≈ 728.56

Therefore, each pizza has approximately 728 slices.

The time becomes infinity, i(t) will become constant, i.e., lim t→[infinity] i(t) = 0.

The current of the given LR-series circuit can be determined using the formula I = (E/R) * (1 - e^-Rt/L).The current i(t) if i(0) = 0 in the LR-series circuit is given by i(t) = 0.125A. The current as t → [infinity] is given by lim t→[infinity] i(t) = 0.How to solve this?The formula for the current in the LR-series circuit is given by:Where E is the electromotive force, R is the resistance, L is the inductance, t is time and I is the current.I = (E/R) * (1 - e^-Rt/L)Given E = 20V, R = 40Ω, L = 0.1H, and i(0) = 0Substitute these values in the above formula.I = (20/40) * (1 - e^-40t/0.1)I = 0.5(1 - e^-400t)I = 0.5 - 0.5e^-400tSo the current is i(t) = 0.5 - 0.5e^-400t.Limit of t as t → [infinity] means that when the time is allowed to run infinitely, then the current will become constant. Hence, when the time becomes infinity, i(t) will become constant, i.e., lim t→[infinity] i(t) = 0. Answer: The current is i(t) = 0.5 - 0.5e^-400t. Limit of t as t → [infinity] means that when the time is allowed to run infinitely, then the current will become constant. Hence, when the time becomes infinity, i(t) will become constant, i.e., lim t→[infinity] i(t) = 0.

Learn more about Infinity

brainly.com/question/16887086

#SPJ11

Answer:

C. (0, –5) and (2, –1)

The sample size cannot be determined from this information alone. A confidence interval for a population mean is calculated based on the mean of a sample, the sample size, and the standard deviation.

Deviation is the difference between the expected value or average of a set of data and the actual value. For example, if the average of a set of numbers is 10 and one of the numbers is 15, the deviation of that number is 5. Deviation is a measure of how much variation exists in a set of data. It is an important tool used to measure the accuracy of a data set and identify outliers within that data set. Deviation is also used to measure the volatility of a stock or other investment, which is a measure of how much its price changes over time.

Therefore, to determine the sample size, the mean, standard deviation, and confidence interval of the sample must all be known.

To learn more about deviation

https://brainly.com/question/12402189

#SPJ1

The sample size cannot be determined from this information alone. A confidence interval for a population mean is calculated based on the mean of a sample, the sample size, and the standard deviation.

Deviation is the difference between the expected value or average of a set of data and the actual value. For example, if the average of a set of numbers is 10 and one of the numbers is 15, the deviation of that number is 5. Deviation is a measure of how much variation exists in a set of data. It is an important tool used to measure the accuracy of a data set and identify outliers within that data set. Deviation is also used to measure the volatility of a stock or other investment, which is a measure of how much its price changes over time.

Therefore, to determine the sample size, the mean, standard deviation, and confidence interval of the sample must all be known.

To learn more about deviation
brainly.com/question/12402189
#SPJ1

Complete Question:
A 95% confidence interval for a population mean was reported to be 152 to 160. If s 15, what sample size was used in this study?

Roy purchased whole pizzas for P 190.00 each. To determine the number of whole pizzas he bought, we can divide the total cost of the pizzas by the cost of each pizza. Therefore, the calculation P 950.00 / P 190.00 results in 5, indicating that Roy bought five whole pizzas.

Roy spent a total of P 1070 for pizza with 3 sets of additional toppings. Since each set of additional toppings costs P 40.00, then the total cost of the toppings is 3 x P 40.00 = P 120.00. Subtracting this from the total amount spent gives us P 950.00, which is the cost of the pizzas alone.

Since each whole pizza costs P 190.00, we can divide the cost of the pizzas by the cost of each pizza to find the number of whole pizzas Roy bought. Therefore, P 950.00 / P 190.00 = 5.

Thus, Roy bought 5 whole pizzas.

Learn more about arithmetic here: brainly.com/question/11559160

#SPJ4

The Height of tree is around 8.33 feet tall.

In science, we work out the Height of an item utilizing distance and points. Distance is the even distance between the items, and point is the point over the level of the article's top, which gives the item's level.

We can utilize the rule of comparable triangles.

The hypotenuse of this triangle would be the line associating Jenny's eyes to the highest point of the tree (we should refer to this distance as "h").

We can set up the accompanying extent between the two triangles:

h / 20 = (h + 5) / 8

To solve for "h", we can cross-multiply and simplify:

8h = 20(h + 5)

8h = 20h + 100

12h = 100

h = 8.33 feet

To know more about Height visit:-

https://brainly.com/question/10726356

#SPJ1

The probability that a randomly selected component is shorter than 7 inches long is approximately 25.14%.

We are given that the lengths of components produced by the automatic press are normally distributed with a mean of 8 inches and a standard deviation of 1.5 inches.

We need to find the probability that a randomly selected component is shorter than 7 inches long.

We can use the standard normal distribution to find this probability. We first need to convert the length of 7 inches to a z-score:

z = (7 - 8) / 1.5 = -0.67

Using a standard normal distribution table or calculator, we can find the area to the left of this z-score, which represents the probability that a randomly selected component is shorter than 7 inches long:

P(z < -0.67) = 0.2514

Learn more about probability here: https://brainly.com/question/24756209

#SPJ1

Step-by-step explanation:

4x + y^2 + 2y =  - 5

4x = - y^2 -2y - 5          

4x = - (y^2 + 2y)   - 5      'complete the square' for y

4x = - ( y +1)^2   + 1    - 5

 x = - 1/4 ( y+1)^2  - 1             vertex is at -1, -1

-14x+2y^2-8y -20 = 0

14x = 2y^2 -8y-20

14x = 2 ( y^2 - 4y) - 20     complete the square for y

14x = 2(y-2)^2  -8 - 20

x = 1/7 ( y-2)^2 - 2                Vertex is at   -2 , 2