Answer:
heat mixture/stir
Explanation:
these are factors of dissolving of solvent faster
which of the following is saturated hydrocarbon?
1 alkyne
2 alkane
3 ethylene
4 alkene
Answer:
2 alkane
Explanation:
Because it has a single bond therefore it is saturated
Which expression is equal to f(x) · g(x)?
Answer:
C. x⁴ + 6·x³ - 12·x - 72
Explanation:
The given functions are;
[tex]f(x) =\sqrt{x^2 + 12 \cdot x + 36}[/tex]
g(x) = x³ -12
We have that [tex]f(x) =\sqrt{x^2 + 12 \cdot x + 36}[/tex] = [tex]f(x) =\sqrt{(x + 6)^2}[/tex] = (x + 6)
Therefore;
f(x)·g(x) = [tex]\sqrt{x^2 + 12 \cdot x + 36}[/tex] × (x³ - 12) = (x + 6) × (x³ - 12)
(x + 6) × (x³ - 12) = x⁴ - 12·x + 6·x³ - 72 = x⁴ + 6·x³ - 12·x - 72
∴ f(x)·g(x) = [tex]\sqrt{x^2 + 12 \cdot x + 36}[/tex] × (x³ - 12) = x⁴ + 6·x³ - 12·x - 72
1. A) Calculate DO of water at 25 0 C, P 0 = 1.01x10 5 Pa; given: water vapor pressure (25 0 C) is 3.2x10 3 Pa and Henry constant of oxygen in water is 1.3x10 -8 mol/l.Pa b) How's DO content changed as increase or decrease water temperature? Explain.
Answer:
cfvgbhnjmk,
Explanation:
chemistry class 9 chapter 1
Explanation:
i) Melting point = 15°C and Boiling point = 110°C
ii) The region C on graph there is only liquid state, the region A on graph there is only solid state.
iii) The straight line A1 - B1 shows that the melting point of solid wax and getting converted to liquid form.
iv) Latent heat of vaporization is a physical property of a substance.
It is defined as the heat required to change one mole of liquid at its boiling point under standard atmospheric pressure.
v) At 'B' the wax is at both solid and liquid state
Where would (aq) (s) go in Cr(NO3)3+K3PO4
Answer:
Cr(NO3)3 (aq) +K3PO4 (s)
Explanation:
air is made up of different gasses such as oxygen nitrogen and carbon dioxide. which statement best describes these three components of air?
-they are all classified as pure substances
-they cannot react with another substance
-they are chemically bonded to one another
-they can be classified as elements
Answer:
They are chemically bonded to one another
Answer:
they can be classified as elements
Liquid octane (CH3(CH2)CH3) reacts with gaseous oxygen gas(O2) to produce gaseous carbon dioxide(CO2) and gaseous water (H2O). What is the theoretical yield of carbon dioxide formed from the reaction of 27.4g of octane and 77.8g of oxygen gas?
Answer:
The theoretical yield of carbon dioxide formed is 68.4 grams CO2
Explanation:
Step 1: Data given
Liquid octane = C8H18
gaseous oxygen gas = O2
gaseous carbon dioxide = CO2
gaseous water = H2O
Mass of octane = 27.4 grams
Molar mass of octane = 114.23 g/mol
Mass of oxygen = 77.8 grams
Molar mass of oxygen = 32.0 g/mol
Step 2: The reaction
2C8H18(l) + 25O2(g) → 16CO2(g) + 18H2O(g)
Step 3: Calculate number of moles
Moles = mass / molar mass
Moles of octane = 27.4 grams / 114.23 g/mol
Moles of octane = 0.240 moles
Moles of oxygen = 77.8 grams / 32.0 g/mol
Moles of oxygen = 2.43 moles
Step 4: Calculate the moles of the products
For 2 moles of octane we need 25 moles of O2 to produce 16 moles of CO2 and 18 moles H2O
O2 is the limiting reactant. It will completely react. (2.43 moles).
There will react 2.43/12.5 = 0.194 moles
There will remain 0.240 - 0.194 = 0.046 moles of octane.
There will be produced:
16/25 * 2.43 = 1.555 moles of CO2
18/25 * 2.43 = 1.750 moles of H2O
This is:
1.56 moles * 44.01 g/mol = 68.4 grams CO2
1.750 moles * 18.02 g/mol = 31.5 grams H2O
The theoretical yield of carbon dioxide formed is 68.4 grams CO2
a body of mass 5kg has momentum of 125kgm/s. find the velocity of the body in motion.
Explanation:We have momemtum = mass X velocity
p = mv
OR, p/m = v
v = (125kg m/s)25kg
v = 125/25 m/s
v = 5 m/s
Help ASAP only right answers only no spam don’t answer if you don’t know
Answer:
element.... ....
.....
What is a substance that decreases the rate of a chemical reaction called? (5 points)
What is a substance that decreases the rate of a chemical reaction called? (5 points)
Catalyst
Inhibitor
Product
Reactant
Answer:
inhibitor :)
Explanation:
Catalysts speed the reaction up, and the other 2 are essential for the reaction to work, so an inhibitor :)
Answer:
Inhibitor
Explanation:
explain with example the need of standard measurement system
Answer:
A standard system of measurement is very important because it helps us from making mistakes at the moment of doing calculations and correctly working...
Answer:
A standard measurement system is important because it allows scientists to compare data and communicate with each other about their results. Metric System – is a measurement system based on the number 10.
How to identify polar molecules
Answer:
Polar molecules occur when there is an electronegativity difference between the bonded atoms. Nonpolar molecules occur when electrons are shared equal between atoms of a diatomic molecule or when polar bonds in a larger molecule cancel each other out
Explanation:
cuantos gramos y moleculas de dioxido de carbono hay en 0.5 moles de dioxido de carbono
paso a paso
Answer:
metro= 22g
Explanation:
Because electrons are orbiting the nucleus, the nucleus is stationary
true or false
Answer:
false, The nucleus of atoms still move around like crazy, it's just the electrons move more.
What is the molarity of the solution formed by dissolving 80. G of NAOH(s) into water to give a total volume of 4.00 l
Answer:
0.5 M
Explanation:
From the question given above, the following data were obtained:
Mass of NaOH = 80 g
Volume of solution = 4 L
Molarity =?
Next, we shall determine the number of mole in 80 g of NaOH. This can be obtained as follow:
Mass of NaOH = 80 g
Molar mass of NaOH = 23 + 16 + 1
= 40 g/mol
Mole of NaOH =?
Mole = mass / molar mass
Mole of NaOH = 80 / 40
Mole of NaOH = 2 moles
Finally, we shall determine the molarity of the solution. This can be obtained as follow:
Mole of NaOH = 2 moles
Volume of solution = 4 L
Molarity =?
Molarity = mole / Volume
Molarity = 2/4
Molarity = 0.5 M
Therefore, the molarity of the solution is 0.5 M.
What mass of barium sulfate (233 g/mol) is produced when 125 mL of a 0.150 M solution of barium chloride is mixed with 125 mL of a 0.150 M solution of iron(III) sulfate
Answer:
4.37 g of barium sulphate
Explanation:
The reaction equation is;
3BaCl2(aq) + Fe2(SO4)3(aq) ---->3 BaSO4(s) + 2FeCl3(aq)
From the question, the number of moles of both barium chloride and FeSO4 = 125/1000 L × 0.150 M = 0.01875 moles
To find the limiting reactant;
3 moles of barium chloride yields 3 moles of barium sulphate
0.01875 moles of barium chloride yields 3 × 0.01875 moles/3 = 0.01875 moles of barium sulphate
1 mole of iron III sulphate yields 3 moles of barium sulphate
0.01875 molesof iron III sulphate yields 0.01875 moles ×3/1 = 0.05625 moles of barium sulphate
Hence,barium chloride is the limiting reactant
Amount of barium sulphate produced = 0.01875 moles × 233 g/mol = 4.37 g of barium sulphate
At standard conditions, 1000 grams of carbon dioxide is how many liters?
Answer: 4.93
Explanation:
How many grams of ammonia can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm?
Answer: The mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.
Explanation:
Given: Volume = 450 L
Temperature = 450 K
Pressure = 300 atm
The reaction equation is as follows.
[tex]N_{2} + 3H_{2} \rightarrow 2NH_{3}[/tex]
Here, 1 mole of nitrogen reacts to give 2 moles of ammonia.
From the given data, moles of nitrogen are calculated as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into the above formula as follows.
[tex]PV = nRT\\300 atm \times 450 L = n \times 0.0821 L atm/mol K \times 450 K\\n = \frac{300 atm \times 450 L}{0.0821 L atm/mol K \times 450 K}\\= \frac{135000}{36.945}\\= 3654.08 mol[/tex]
For 3654.08 moles of nitrogen, the moles of ammonia produced is as follows.
[tex]2 \times 3654.08 mol\\= 7308.16 mol[/tex]
Therefore, mass of ammonia (molar mass = 17.03 g/mol) is calculated as follows.
[tex]Moles = \frac{mass}{molarmass}\\7308.16 mol = \frac{mass}{17.03 g/mol}\\mass = 124457.96 g[/tex]
Thus, we can conclude that the mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.
Suppose that you chose sodium carbonate to precipitate the chromium ions from a solution of chromium (III) chloride. Write and balance the equation of this double-displacement reaction.
If the solution has a volume of 520 mL and the concentration of chromium (III) chloride is 0.224 M, how many grams of sodium carbonate should you add to the solution to precipitate out all the chromium ions?
Answer:
18.5g Na2CO3
Explanation:
Chromium (III) chloride, CrCl3, reacts with Na2CO3 as follows:
2CrCl3 + 3Na2CO3 → Cr2(CO3)3(s) + 6NaCl
Where 2 moles of CrCl3 react with 3 moles of Na2CO3 to produce 1 mole of Cr2(CO3)3 -The precipitate-
To solve this question we need to find the moles of CrCl3 added. With the chemical equation we can find the moles of Na2CO3 and its mass as follows:
Moles CrCl3:
520mL = 0.520L * (0.224mol/L) = 0.116 moles CrCl3
Moles Na2CO3:
0.116 moles CrCl3 * (3 mol Na2CO3 / 2mol CrCl3) = 0.175 moles Na2CO3
Mass Na2CO3 -Molar mass: 105.99g/mol-
0.175 moles Na2CO3 * (105.99g/mol) = 18.5g Na2CO3
radical example ....
Not sure how to answer this:
A. Identify the side that is acidic
B. Explain why it's acidic
C. Identify the side that is basic
D. Explain why this side is basic
Answer:
A. The red side is acidic.
B. Because it has more positive hydrogen ions.
C. The blue side is basic.
D. Because it has more negative hydroxide ion.
Given the data from the question,
A. The side with more H⁺ is acidic
B. It is acidic because it contains more H⁺
C. The side with more OH¯ is basic
B. It is basic because it contains more OH¯
What is pH ?This is simply a measure of the acidity / alkalinity of a solution.
The pH measures the hydrogen ion concentration while the pOH measures the hydroxide ion concentration
pH scaleThe pH scale is a scale that gives an understanding of the variation of the acidity / alkalinity of a solution.
The scale ranges from 0 to 14 indicating:
0 to 6 indicates acid 7 indicates neutral 8 to 14 indicate basicHow to determine which side is acidic.The presence of H⁺ indicates acidity.
Thus, the side with more H⁺ is acidic.
How to determine which side is basicThe presence of OH¯ indicates the solution is basic.
Therefore, the side with more OH¯ is basic
Learn more about pH:
https://brainly.com/question/3709867
If aluminum is placed in an aqueous solution of silver nitrate and a single replacement reaction happens, what would be the balanced equation to represent the reaction?
Answer:
The balanced equation would be:
3AgNO3+Al→3Ag+Al(NO3)3
Explanation:
what are condition for formation of electrovalent bond
Answer:
The conditions for the formation of an electrovalent bond are as follows: The atom which changes into cation (+ ive ion) should possess 1,2 or 3 valency electrons. It will loose these electrons to form cation with +1,+2 or +3 charge
Options ^
QUESTION:
Which of the following choices will an atom of sodium (Na) be most likely to bond with?
Answer:
A. 2 chlorine (Cl) atoms
Explanation:
2 chlorine atoms means that chlorine is a gas.
Sodium (Na) reacts with 2 chlorine atoms according to the equation below;
Na(s) + Cl2(g) => NaCl2
Answer:
fluorine is what its looking for
Explanation:
How is each nucleotide different from the others?
A. It has different bases.
B. It has different side chains.
C. It has different carboxyl groups.
D. It has different amine groups.
Answer:
a. po tamang sagot
Explanation:
pa pafoolow po pleasr
The DNA and RNA are polynucleotides which contain a chain of nucleotides monomers with different nitrogenous bases. Each nucleotide different from the others, as It has different bases. The correct option is A.
What is a nucleotide?A nucleotide is defined as a compound containing three component units, namely a pentose sugar (either ribose or 2-deoxyribose), a heterocyclic nitrogenous base (a substituted purine or a substituted pyrimidine) and a phosphate group.
The nucleotides are the phosphate esters of nucleosides. A nucleotide containing ribose as the sugar unit is termed as the ribonucleotide. While one containing 2-deoxyribose as the sugar unit is termed as the deoxyribonucleotide.
The nitrogenous bases in RNA are adenine, guanine, cytosine and uracil whereas in DNA the bases are adenine, guanine, cytosine and thymine. The purines are adenine and guanine whereas cytosine, thymine and uracil are pyrimidines.
Thus the correct option is A.
To know more about nucleotide, visit;
https://brainly.com/question/28178584
#SPJ7
Iron reacts with copper (I) sulfate to produce copper and iron (II) sulfate. If 4.32x10^25
particles of copper (I) sulfate react, how many moles of copper will be produced?
Fe + Cu2504 --> FeSO4 + 2Cu
Answer: 143.48 moles of copper will be produced.
Explanation:
We are given:
Number of particles of copper (I) sulfate = [tex]4.32\times 10^{25}[/tex]
According to the mole concept:
[tex]6.022\times 10^{23}[/tex] number of particles is contained in 1 mole of a compound
So, [tex]4.32\times 10^{25}[/tex] number of particles will be contained in = [tex]\frac{1}{6.022\times 10^{23}}\times 4.32\times 10^{25}=71.74mol[/tex] of copper (I) sulfate
The given chemical equation follows:
[tex]Fe+Cu_2SO_4\rightarrow FeSO_4+2Cu[/tex]
By the stoichiometry of the reaction:
If 1 mole of copper (I) sulfate produces 2 moles of Cu
So, 71.74 moles of copper (I) sulfate will produce = [tex]\frac{2}{1}\times 71.74=143.48mol[/tex] of Cu
Hence, 143.48 moles of copper will be produced.
Interms of air molecules, what gives a balloon its shape when air is blown into it
Answer: Because when you blow air /gas into a balloon you fill it with air particles ,so they more you blow u blow in more air particles so they tend to collide with each other ,so as they hit the walls of the balloons pressure is exerted ,so the pressure keeps the balloon inflated with its shape
(Please help)
1.what is the most common isotope for element x
2.calculate the average atomic mass for element x
Answer:
1. Isotope with mass number 39.
2. 39.02g/mol
Explanation:
1. The most common isotope is the isotope in the higher proportion, that is:
Isotope with mass number 39.
2. The average atomic mass is the sum of the masses times their abundance. For the element X:
Average atomic mass:
38*0.0967 + 39*0.7868 + 40*0.1134 + 41*0.0031
= 39.02g/mol
i need to know the answer ASAP PLEASE
Answer:
E....H+
Explanation:
coz when hydrogen ions are formed they automatically join to form hydrogen
The maximum number of electrons that can be present in an SHELL is
a) [tex]2 {n}^{2} [/tex]
b) [tex]2 {n}^{2} + 1[/tex]
c) 2n
d) none of these.
[tex]\huge\boxed{\fcolorbox{red}{blue}{ QUESTION }}[/tex]
The maximum number of electrons that can be present in an shell is
[tex] \orange{\underline{\huge{\bold{\textit{\green{\bf{OPTIONS}}}}}}} [/tex]
a) [tex]2 {n}^{2} [/tex]
b) [tex]2 {n}^{2} + 1[/tex]
c) 2n
d) none of these.
[tex] \huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}[/tex]
OPTION (a)
[tex]2 {n}^{2} [/tex]
[tex] \bold { \red{ \star{ \blue{EXAMPLES}}}}[/tex]
In First shell only 2 electron can be placed .
[tex]2 {n}^{2} \\ n = 1 \: (bez \: \: no \: \: shell \: = 1) \\ so \\ 2 { n}^{2} = 2 \times {1}^{2} = 2 \: electrons[/tex]
In second shell 8 electrons can be placed
[tex]2 {n}^{2} \\ n = 1(bez \: \: no\: \: shell \: = 2) \\ 2 {n}^{2} = 2 \times {2}^{2} = 2 \times 4 = 8 \: electrons[/tex]