Suppose a 1300 kg car is traveling around a circular curve in a road at a constant
9.0 m/sec. If the curve in the road has a radius of 25 m, then what is the
magnitude of the unbalanced force that steers the car out of its natural straight-
line path?

Answers

Answer 1

Answer:

F = 4212 N

Explanation:

Given that,

Mass of a car, m = 1300 kg

Speed of car on the road is 9 m/s

Radius of curve, r = 25 m

We need to find the magnitude of the unbalanced force that steers the car out of its natural straight-  line path. The force is called centripetal force. It can be given by :

[tex]F=\dfrac{mv^2}{r}\\\\F=\dfrac{1300\times 9^2}{25}\\\\F=4212\ N[/tex]

So, the force has a magnitude of 4212 N


Related Questions

Using a conventional two-slit apparatus with light of wavelength 605 nm, 34 bright fringes per centimeter are observed on a screen 3.1 m away. What is the slit separation

Answers

Answer:

d = 6.38 x 10⁻³ m = 6.38 mm

Explanation:

Since, the no. of bright fringes is 34 in a centimeter, therefore, the fringe spacing must be equal to:

Fringe Spacing = Δx = 1 cm/34

Δx = 0.0294 cm = 2.94 x 10⁻⁴ m

But, the formula for fringe spacing in a double slit experiment is:

Δx = λL/d

where,

λ = wavelength of light = 605 nm = 6.05 x 10⁻⁷ m

L = Distance between screen and slits = 3.1 m

d = slit separation = ?

Therefore,

2.94 x 10⁻⁴ m = (6.05 x 10⁻⁷ m)(3.1 m)/d

d = (18.755 x 10⁻⁷ m²)/(2.94 x 10⁻⁴ m)

d = 6.38 x 10⁻³ m = 6.38 mm

The capacitor is originally charged. How does the current I in the ammeter behave as a function of time after the switch is closed?

1. I = 0 always.

2. I = constant, not equal to 0.

3. I increases, then is constant.

4. I instantly jumps up, then slowly decreases.

5. None of the above.

Answers

Answer:

The current in the ammeter is zero.

(1) is correct option.

Explanation:

Given that,

The capacitor is charged.

We need find the current after closed switched

We know that,

When switch is closed then the capacitor behave as a short circuit, and the all current flows through it. the current is zero.

Then, the ammeter reads zero.

Hence, The current in the ammeter is zero.

(1) is correct option.

Consider 2 converging lenses of focal lengths 5 mm (objective) and 50 mm.(eyepiece) An object 0.1 mm in size is placed a distance of 5.2 mm from the objective.
1. What is the size and location of the image from the objective? What is the linear magnification of this objective?
2. Treat the image from the objective as an object for the eyepiece. If the eyepiece creates an image at infinity, how far apart are the two lenses?
3. What is the angular magnification of the pair of lenses?

Answers

Answer:

1)   q₁ = 12.987 cm , b)       L = 17.987 cm , c)      m = 179.87

Explanation:

We can solve the geometric optics exercises with the equation of the constructor

         1 / f = 1 / p + 1 / q

where f is the focal length, p and q are the distance to the object and the image respectively.

Let's apply this equation to our case

1) f = 5mm = 0.5 cm

    p₁ = 5.2 mm = 0.52 cm

    h = 0.1 mm = 0.01 cm

    1 / q₁ = 1 / f- 1 / p

    1 / q₁ = 1 / 0.5 - 1 / 0.52 = 2 - 1.923

    1 / q₁ = 0.077

    q₁ = 12.987 cm

2) in this part they tell us that the eyepiece creates an image at infinity, therefore the object that comes from being at the focal length of the eyepiece

            p₂ = 5 cm

The absolute thing that goes through the two lenses is

           L = q₁ + p₂

           L = 12.987 +5

           L = 17.987 cm

3) This lens configuration forms the so-called microscope, whose expression for the magnifications

           m = -L / f_target 25 cm / f_ocular

           m = - 17.987 / 0.5 25 / 5.0

            m = 179.87

The cylinder is displaced 0.17 m downward from its equilibrium position and is released at time t = 0. Determine the displacement y and the velocity v when t = 3.1 s. The displacement and velocity are positive if downward, negative if upward. What is the magnitude of the maximum acceleration?

Answers

Complete Question

The image of this question  is shown on the first uploaded image

Answer:

a

   [tex]d =0.161 \ m[/tex]

b

  [tex]v = - 0.054 \ m/s[/tex]

c

  [tex]a = 6.12 \ m/s^2[/tex]

Explanation:

From the question we are told that

      The maximum  displacement is  A =  0.17  m  

      The  time considered is  [tex]t = 3.1 \ s[/tex]

     The spring constant is  [tex]k = 137 \ N \cdot m[/tex]

      The mass is  [tex]m = 3.8 \ kg[/tex]

Generally given that the motion which the cylinder is undergoing is a simple harmonic motion , then the displacement is mathematically represented as

             [tex]d = A cos (w t )[/tex]

Where [tex]w[/tex] is the angular frequency which is mathematically evaluated as

        [tex]w = \sqrt{\frac{k}{m} }[/tex]

substituting values

       [tex]w = \sqrt{\frac{137}{ 3.8} }[/tex]

        [tex]w =6[/tex]

So the displacement is at  t

      [tex]d = 0.17 cos (6 * 3.1 )[/tex]

       [tex]d =0.161 \ m[/tex]

Generally the velocity of a  SHM(simple harmonic motion) is mathematically represented as

         [tex]v = - Asin (wt)[/tex]

substituting values

         [tex]v = - 0.17 sin ( 6 * 3.1 )[/tex]

          [tex]v = - 0.054 \ m/s[/tex]

Generally the maximum acceleration is  mathematically represented as

         [tex]a = w^2 * A[/tex]

substituting values

         [tex]a_{max} = 6^2 * (0.17)[/tex]

substituting values

         [tex]a = 6^2 * (0.17)[/tex]

        [tex]a = 6.12 \ m/s^2[/tex]

A father and his young son get on a teeter-totter. The son sits 2 m fromthe center, but the father has to sit closer to balance. Where does the father have to sit to balance the teeter-totter if he weighs 4 times as much as his son?

Answers

Answer:

The distance of the father from the center is  [tex]d_f = \frac{1}{2} \ m[/tex]

Explanation:

From the question we are told that

    The distance of the son from the center is  [tex]d_s = 2 \ m[/tex]

 

Let the mass of the son be  [tex]m_s[/tex]

     then the mass of the father is  [tex]m_f = 4m_s[/tex]

Now for the teeter-totter to be balanced the torque due to the weight of the father must be equal to the torque due to the weight the son, this is mathematically represented as

         [tex]\tau_s = \tau_f[/tex]

Where  [tex]\tau_s[/tex] is the torque of the son which is mathematically represented as

        [tex]\tau_ s = m_s * d_s * g[/tex]

while [tex]\tau_f[/tex] is the torque of the father which is mathematically represented as

        [tex]\tau_f = m_f * d_f * g[/tex]

=>    [tex]\tau_f = 4 m_s * d_f * g[/tex]

 So

         [tex]4 m_s * d_f * g = m_s * d_s * g[/tex]

substituting values

        [tex]4 * d_f * = 2[/tex]

 =>    [tex]d_f = \frac{1}{2} \ m[/tex]      

3 QUESTIONS PLEASE ANSWER!

Answers

1. Meters (m)
2. Liters (L)
3. Gm/cm3

Answer:

1. A

2. C

3. D

Explanation:

A fish in a flat-sided aquarium sees a can of fish food on the counter. To the fish's eye, the can looks to be 43 cmcm outside the aquarium.

Required:
What is the actual distance between the can and the aquarium?

Answers

Answer:

The actual distance is  [tex]d_a = 0.3233\ m[/tex]

Explanation:

From the question we are told that

     The  distance of the can is d =  43 cm  =  0.43 m

     

Generally the actual distance is mathematically represented as

         [tex]d_a = [\frac{ n_a }{n_w} ]* d[/tex]

Where  [tex]n_a , n_w[/tex] are the refractive index of air and water and their value is  

         [tex]n_a = 1 , \ \ \ n_w = 1.33[/tex]

So

       [tex]d_a = [\frac{ 1 }{1.33} ]* 0.43[/tex]

       [tex]d_a = 0.3233\ m[/tex]

When an LRC series circuit is driven at resonance, which of the following statements about the circuit are correct? (There may be more than one correct choice.)a) The impedance of the circuit has its minimum value.b) The inductive reactance and the capacitive reactance are exactly equal to each other.c) The impedance of the circuit is zero.d) The inductive reactance and the capacitive reactance are both zero.e) The impedance of the circuit has its maximum value.

Answers

Answer:

Answers a) and b) should be marked as correct.

Explanation:

Recall that the resonance in an LRC circuit occurs when the current through the circuit is at its maximum, and such takes place when the impedance  (Z) of the circuit reaches its maximum. This means that the impedance (see formula below) is at its minimum value:

[tex]Z=\sqrt{R^2+(\omega\,L-\frac{1}{\omega\,C})^2 }[/tex]

as per the impedance expression above, such happens when the term in parenthesis inside the root which contains the inductive reactance ([tex]\omega\,L[/tex]) and the capacitive reactance ([tex]1/\omega\,C[/tex]) have the same value.

Therefore, answers:

a) "The impedance of the circuit has its minimum value."

and

b) "The inductive reactance and the capacitive reactance are exactly equal to each other."

are correct answers.

(a) The impedance of the circuit has its minimum value.

(b) The inductive reactance and the capacitive reactance are exactly equal to each other

LRC series circuit consists of inductor, resistor and capacitor is series.

The impedance of the circuit is calculated as follows;

[tex]Z = \sqrt{R^2 + (X_C -X_L)^2}[/tex]

where;

R is the resistance[tex]X_C[/tex] is the capacitive reactance[tex]X_L[/tex] is the inductive reactance

The impedance of the circuit is minimum when the capacitive reactance is equal to the inductive reactance.

[tex]X_C = X_L \\\\Z = \sqrt{R^2 \ + (0)^2} \\\\Z = R[/tex]

Learn more here:https://brainly.com/question/17330472

The AB rope is fixed to the ground at its A end, and forms 30º with the vertical. Its other end is connected to two ropes by means of the B-ring of negligible weight. The vertical rope supports the E block and the other rope passes through the grounded articulated pulley C to join at its end to the 80 N weight block D. The inclined section of the BD rope forms 60º with the vertical one; determine the weight of the E block necessary for the balance of the system and calculate the tension in the AB rope.

Answers

Answer:

T = 80√3 N ≈ 139 N

W = 160 N

Explanation:

Sum of forces on B in the x direction:

∑F = ma

80 N sin 60° − T sin 30° = 0

T = 80 N sin 60° / sin 30°

T = 80√3 N

T ≈ 139 N

Sum of forces on B in the y direction:

∑F = ma

80 N cos 60° + T cos 30° − W = 0

W = 80 N cos 60° + T cos 30°

W = 40 N + 120 N

W = 160 N

A mass m = 0.6 kg is released from rest at the top edge of a hemispherical bowl with radius = 1.1 meters. The mass then slides without friction down the inner surface toward the bottom of the bowl. At a certain point of its path the mass achieves a speed v = 3.57 m/s. At this point, what angle \theta\:θ ( in degrees) does the mass make with the top of the bowl?

Answers

Answer:

The  angle is  [tex]\theta = 36.24 ^o[/tex]

Explanation:

From the question we are told that

    The  mass is  [tex]m = 0.6 \ kg[/tex]

     The radius is  [tex]r = 1.1 \ m[/tex]

     The speed is  [tex]v = 3.57 \ m /s[/tex]

According to  the law of energy conservation

  The  potential energy of the mass at the top is equal to the kinetic energy at the bottom i.e

      [tex]m * g * h = \frac{1}{2} * m * v^2[/tex]

 =>    [tex]h = \frac{1}{2 g } * v^2[/tex]

Here h is the vertical distance traveled by the mass  which is also mathematically represented as

      [tex]h = r * sin (\theta )[/tex]

So

     [tex]\theta = sin ^{-1} [ \frac{1}{2* g* r } * v^2][/tex]

substituting values

     [tex]\theta = sin ^{-1} [ \frac{1}{2* 9.8* 1.1 } * (3.57)^2][/tex]

     [tex]\theta = 36.24 ^o[/tex]

a body accelerate uniformly from rest at the rate of 3meters per seconds for 8 sec . calculate the distance covered by the body during the acceleration
SOL​

Answers

Answer:

96 m

Explanation:

Given:

v₀ = 0 m/s

a = 3 m/s²

t = 8 s

Find: Δx

Δx = v₀ t + ½ at²

Δx = (0 m/s) (8 s) + ½ (3 m/s²) (8 s)²

Δx = 96 m

10. How far does a transverse pulse travel in 1.23 ms on a string with a density of 5.47 × 10−3 kg/m under tension of 47.8 ????? How far will this pulse travel in the same time if the tension is doubled?

Answers

Answer: Tension = 47.8N, Δx = 11.5×[tex]10^{-6}[/tex] m.

              Tension = 95.6N, Δx = 15.4×[tex]10^{-5}[/tex] m

Explanation: A speed of wave on a string under a tension force can be calculated as:

[tex]|v| = \sqrt{\frac{F_{T}}{\mu} }[/tex]

[tex]F_{T}[/tex] is tension force (N)

μ is linear density (kg/m)

Determining velocity:

[tex]|v| = \sqrt{\frac{47.8}{5.47.10^{-3}} }[/tex]

[tex]|v| = \sqrt{0.00874 }[/tex]

[tex]|v| =[/tex] 0.0935 m/s

The displacement a pulse traveled in 1.23ms:

[tex]\Delta x = |v|.t[/tex]

[tex]\Delta x = 9.35.10^{-2}*1.23.10^{-3}[/tex]

Δx = 11.5×[tex]10^{-6}[/tex]

With tension of 47.8N, a pulse will travel Δx = 11.5×[tex]10^{-6}[/tex]  m.

Doubling Tension:

[tex]|v| = \sqrt{\frac{2*47.8}{5.47.10^{-3}} }[/tex]

[tex]|v| = \sqrt{2.0.00874 }[/tex]

[tex]|v| = \sqrt{0.01568}[/tex]

|v| = 0.1252 m/s

Displacement for same time:

[tex]\Delta x = |v|.t[/tex]

[tex]\Delta x = 12.52.10^{-2}*1.23.10^{-3}[/tex]

[tex]\Delta x =[/tex] 15.4×[tex]10^{-5}[/tex]

With doubled tension, it travels [tex]\Delta x =[/tex] 15.4×[tex]10^{-5}[/tex] m

"Two waves of the same frequency have amplitudes 1.00 and 2.00. They interfere at a point where their phase difference is 60.0°. What is the resultant amplitude?"

Answers

Answer:

The resultant amplitude of the two waves is 2.65.

Explanation:

Given;

amplitude of the first wave, A₁ = 1

amplitude of the second wave, A₂ = 2

phase difference of the two amplitudes, θ = 60.0°.

The resultant amplitude of two waves after interference is given by;

[tex]A = \sqrt{A_1^2 + A_2^2 + 2A_1A_2Cos \theta} \\\\A = \sqrt{1^2 + 2^2 + 2(1)(2)Cos 60} \\\\A= 2.65[/tex]

Therefore, the resultant amplitude of the two waves is 2.65.

An isolated system consists of two masses. The first, m1, has a mass of 1.90 kg, and is initially traveling to the east with a speed of 6.71 m/s. The second, m2, has a mass of 2.94 kg, and is initially traveling to the west with an unknown initial speed. The two masses collide head-on in a completely inelastic collision that stops them both. Calculate the initial kinetic energy of m2.

Answers

Answer:

m1v1=m2v2, v2=4.3m/s KE=(0.5)(2.94)(4.3)=6.2J

In a double-slit experiment the distance between slits is 5.0 mm and the slits are 1.4 m from the screen. Two interference patterns can be seen on the screen: one due to light of wavelength 450 nm, and the other due to light of wavelength 590 nm. What is the separation in meters on the screen between the m = 5 bright fringes of the two interference patterns?

Answers

Answer:

 Δy = 1 10⁻⁴ m

Explanation:

In double-slit experiments the constructive interference pattern is described by the equation

           d sin θ = m λ

In this case we have two wavelengths, so two separate patterns are observed, let's use trigonometry to find the angle

         tan θ = y / L

as the angles are small,

         tan θ = sin θ / cos θ = sin θ

substituting

         sin θ = y / L

         d y / L = m λ

         y = m λ / d L

let's apply this formula for each wavelength

λ = 450 nm = 450 10⁻⁹ m

m = 5

d = 5.0 mm = 5.0 10⁻³ m

      y₁ = 5 450 10⁻⁹ / (5 10⁻³  1.4)

      y₁ = 3.21 10⁻⁴ m

we repeat the calculation for lam = 590 nm = 590 10⁻⁹ m

      y₂ = 5 590 10⁻⁹ / (5 10⁻³  1.4)

      y₂=  4.21 10⁻⁴ m

the separation of these two lines is

        Δy = y₂ - y₁

        Δy = (4.21 - 3.21) 10⁻⁴ m

        Δy = 1 10⁻⁴ m

Can anyone provide me the answer with explanation?​

Answers

Answer:

the answer to your question us c honey

Answer:

C

Explanation:

This is so because different materials vary in resistance and conductance of current, heat. Metals are good conductors while none metals like rubber, plastic, glass etc are good insulators or resistors.

1. Why do you see colors when you look at reflected light from a CD or DVD disk, or when you look at a soap bubble or oil film on water?
2. What do you think causes the colors on the artwork panels on the side of HLS2 (Health Sciences building) which change with time of day and the angle from which you view them?

Answers

Explanation:

1.The light reflected from the CD/DVD or soap bubble or oil film forms an interference with the surrounding light. The inference both constructive and destructive making some color appear and some disappear.

2.As light behaves as wave it will interfere differently at different angles. At certain angle it will interfere constructively and at certain angle it will interfere destructively making some color brighter and some disappear. So, at different angles the color are different.

Interference pattern is responsible for the formation of different colour when a light reflected from CD or soap bubble.

We can see colors when we look at reflected light from a CD or DVD disk, or a soap bubble or oil film on water because of the interference pattern. The colors that we see on the CD are created due to the reflection of white light from ridges in the metal. When light passes through something with many small ridges or scratches, we often see rainbow colors and interesting patterns.

These patterns are called interference patterns. White light is made up of 7 colors i.e. red, orange, yellow, green, blue, indigo, violet. The CD converts or separates the white light into 7 colors so we can conclude that interference pattern is responsible for the formation of different colour when a light reflected from CD OR soap bubble.

Learn more: https://brainly.com/question/17177523

Light of wavelength 519 nm passes through two slits. In the interference pattern on a screen 4.6 m away, adjacent bright fringes are separated by 5.2 mm in the general vicinity of the center of the pattern. What is the separation of the two slits?

Answers

Answer:

The separation of the two slits is 0.456 mm.

Explanation:

Given the wavelength of light = 519 nm

The indifference pattern = 4.6 m

Adjacent bright fringes = 5.2 mm

In the interference, the equation required is Y = mLR/d

Here, d sin theta = mL

L = wavelgnth

For bright bands, m is the  order = 1,2,3,4  

For dark bands,  m = 1.5, 2.5, 3.5, 4.5

R = Distance from slit to screen (The indifference pattern)

Y = Distance from central spot to the nth  order fringe or fringe width

Thus,  here d = mLR/Y

d = 1× 519nm × 4.6 / 5.2mm

d = 0.459 mm

Experiments are performed with ultracold neutrons having velocities of 7.54 m/s. (a) What is the wavelength (in nm) of such a neutron

Answers

Answer:

     λ = 52.5 nm

Explanation:

De Broglie's duality principle states that all matter has wave and particle characteristics, being related by the expression

          p = h / λ

where the moment

          p = mv

          λ = h / mv

let's calculate

        λ = 6.63 10⁻³⁴ / 1.675 10⁻²⁷ 7.54

        λ = 5.25 10⁻⁸ m

Let's reduce anm

       λ = 5.25 10⁻⁸ m (10⁹ nm / 1m)

       λ = 52.5 nm

You have a lightweight spring whose unstretched length is 4.0 cm. First, you attach one end of the spring to the ceiling and hang a 1.8 g mass from it. This stretches the spring to a length of 5.2 cm . You then attach two small plastic beads to the opposite ends of the spring, lay the spring on a frictionless table, and give each plastic bead the same charge. This stretches the spring to a length of 4.8 cm .

Required:
What is the magnitude of the charge (in nC) on each bead?

Answers

Answer:

The magnitude of the charge is 54.9 nC.

Explanation:

The charge on each bead can be found using Coulomb's law:

[tex] F_{e} = \frac{k*q_{1}q_{2}}{r^{2}} [/tex]

Where:

q₁ and q₂ are the charges, q₁ = q₂  

r: is the distance of spring stretching = 4.8x10⁻² m

[tex]F_{e}[/tex]: is the electrostatic force

[tex] F_{e} = \frac{k*q^{2}}{r^{2}} \rightarrow q = \sqrt{\frac{F_{e}}{k}}*r [/tex]    

Now, we need to find [tex]F_{e}[/tex]. To do that we have that Fe is equal to the spring force ([tex]F_{k}[/tex]):

[tex] F_{e} = F_{k} = -kx [/tex]

Where:

k is the spring constant

x is the distance of the spring = 4.8 - 4.0 = 0.8 cm

The spring constant can be found by equaling the sping force and the weight force:

[tex] F_{k} = -W [/tex]

[tex] -k*x = -m*g [/tex]

where x is 5.2 - 4.0 = 1.2 cm, m = 1.8 g and g = 9.81 m/s²

[tex] k = \frac{mg}{x} = \frac{1.8 \cdot 10^{-3} kg*9.81 m/s^{2}}{1.2 \cdot 10^{-2} m} = 1.47 N/m [/tex]      

Now, we can find the electrostatic force:

[tex] F_{e} = F_{k} = -kx = -1.47 N/m*0.8 \cdot 10^{-2} m = -0.0118 N [/tex]

And with the magnitude of the electrostatic force we can find the charge:

[tex]q = \sqrt{\frac{F_{e}}{k}}*r = \sqrt{\frac{0.0118 N}{9 \cdot 10^{9} Nm^{2}/C^{2}}}*4.8 \cdot 10^{-2} m = 54.9 \cdot 10^{-9} C = 54.9 nC[/tex]

Therefore, the magnitude of the charge is 54.9 nC.

I hope it helps you!  

The magnitude of the charge (in nC) on each bead is equal to 55.21 nC.

Given the following data:

Original length = 4.0 cm to m = 0.04 mMass = 1.8 grams to kg = 0.0018New length = 5.2 cm to m = 0.052.Final length = 4.8 cm to m = 0.048 m.

Extension, e = [tex]0.052 - 0.048[/tex] = 0.012 m

Scientific data:

Acceleration due to gravity = 9.8 [tex]m/s^2[/tex]Coulomb's constant = [tex]8.99 \times 10^9\; Nm^2/C^2[/tex]

To calculate the magnitude of the charge (in nC) on each bead, we would apply Coulomb's law:

First of all, we would determine the spring constant of this lightweight spring by using this formula:

[tex]W = mg = Ke \\\\K=\frac{mg}{e} \\\\K=\frac{0.0018 \times 9.8}{0.012} \\\\K=\frac{0.01764}{0.012}[/tex]

Spring constant, K = 1.47 N/m.

For the electrostatic force:

[tex]F = ke\\\\F = 1.47 \times 0.08[/tex]

F = 0.01176 Newton.

Coulomb's law of electrostatic force.

Mathematically, the charge in an electric field is given by this formula:

[tex]q = \sqrt{\frac{F}{k} } \times r[/tex]

Substituting the given parameters into the formula, we have;

[tex]q = \sqrt{\frac{0.01176 }{8.99 \times 10^9} } \times 0.048\\\\q=\sqrt{1.3228 \times 10^{-12}} \times 0.048\\\\q=1.1502 \times 10^{-6} \times 0.048\\\\q= 5.521 \times 10^{-8}\;C[/tex]

Note: 1 nC = [tex]1 \times 10^{-9}\;C[/tex]

Charge, q = 55.21 nC.

Read more on electric field here: https://brainly.com/question/14372859

In a double-slit experiment using light of wavelength 486 nm, the slit spacing is 0.600 mm and the screen is 2.00 m from the slits. Find the distance along the screen between adjacent bright fringes.

Answers

Answer:

The distance is [tex]y = 0.00162 \ m[/tex]

Explanation:

From the question we are told that

    The wavelength is  [tex]\lambda = 486 \ nm = 486 *10^{-9} \ m[/tex]

   The  slit spacing is  [tex]d = 0.600 \ mm = 0.60 *10^{-3} \ m[/tex]

    The distance of the screen is  [tex]D = 2.0 \ m[/tex]

 Generally the distance along the screen between adjacent bright fringes is mathematically represented as  

        [tex]y = \frac{\lambda * D}{d}[/tex]

substituting values

         [tex]y = \frac{ 486 *10^{-9} * 2}{0.6*10^{-3}}[/tex]

         [tex]y = 0.00162 \ m[/tex]

1.) When the acceleration is zero, what can you say about the velocity of an object?

Answers

Answer:

it is either constant or zero

Explanation:

3. What conclusion can you make about the electric field strength between two parallel plates? Explain your answer referencing Photo 2.

Answers

Answer:

From the relation above we can conclude that the  as the distance between the two plate increases the electric field strength decreases

Explanation:

I cannot  find any attached photo, but we can proceed anyways theoretically.

The electric field strength (E) at any point in an electric field is the force experienced by a unit positive charge (Q) at that point

i.e

[tex]E=\frac{F}{Q}[/tex]

But the force F

[tex]F= \frac{kQ1Q2}{r^2}[/tex]

But the electric field intensity due to a point charge Q at a distance r meters away is given by

[tex]E= \frac{\frac{kQ1Q2}{r^2}}{Q} \\\\\E= \frac{Q1}{4\pi er^2 }[/tex]

From the relation above we can conclude that the  as the distance between the two plate increases the electric field strength decreases

A body of mass 5.0 kg is suspended by a spring which stretches 10 cm when the mass is attached. It is then displaced downward an additional 5.0 cm and released. Its position as a function of time is approximately what? Group of answer choices

Answers

Answer:

0.05cos10t

Explanation:

X(t) = Acos(wt+φ)

The oscillation angular frequency can be calculated using below formula

w = √(k/M)

Where K is the spring constant

But we were given body mass of 5.0 kg

We know acceleration due to gravity as 9.8m)s^2

The lenghth of spring which stretches =10 cm

Then we can calculate the value of K

k = (5.0kg*9.8 m/s^2)/0.10 m

K= 490 N/m

Then if we substitute these values into the formula above we have

w = √(k/M)

w = √(490/5)

= 9.90 rad/s=10rads/s(approximately)

Its position as a function of time can be calculated using the below expresion

X(t) = Acos(wt+φ)

We were given amplitude of 5 cm , if we convert to metre = 0.05m

w=10rads/s

Then if we substitute we have

X(t)=0.05cos(10×t)

X(t)= 0.05cos10t

Therefore,Its position as a function of time=

X(t)= 0.05cos10t

how does a system naturally change over time

Answers

Answer:

The movement of energy and matter in a system differs from one system to another. On the other hand, in open system both the matter and energy move into and out of the system. Therefore, matter and energy in a system naturally change over time will decrease in entropy.

Explanation:

Answer:

Decrease in entropy

Explanation:

Various systems which exist in nature possess energy and matter that move through these system continuously. The movement of energy and matter in a system differs from one system to another.

In a closed system for example, only energy flows in and out of the system while matter does not enter or leave the system.

On the other hand, in open system both the matter and energy move into and out of the system.

The Bohr model pictures a hydrogen atom in its ground state as a proton and an electron separated by the distance a0 = 0.529 × 10−10 m. The electric potential created by the electron at the position of the proton is

Answers

Answer:

E = -8.23 ​​10⁻¹⁷ N / C

Explanation:

In the Bohr model, the electric potential for the ground state corresponding to the Bohr orbit is

         E = k q₁ q₂ / r²

in this case

q₁ is the charge of the proton and q₂ the charge of the electron

         E = - k e² / a₀²

let's calculate

         E = - 9 10⁹ (1.6 10⁻¹⁹)² / (0.529 10⁻¹⁰)²

         E = -8.23 ​​10⁻¹⁷ N / C

You plan to take your hair blower to Europe, where the electrical outlets put out 240 V instead of the 120 V seen in the United States. The blower puts out 1700 W at 120 V.Required:a. What could you do to operate your blower via the 240V line in Europe? which one is it?b. What current will your blower draw from a European outlet?c. What resistance will your blower appear to have when operated at 240 ?

Answers

Answer:

a) Connect a series resistance of 8,47 ohms

b)14,16 [A]

c) r = 10,96 ohms

Explanation:

My blower requires 120 (v) then, I have to connect a series resistor to make the nominal 240 (v) of the European voltage outlet drop to 120 (V) but at the same time keep the level of current to operate my blower

In America

P = V*I

1700 (w) = 120*I

I = 1700/120 [A]

I = 14,16 [A]        current needed for the blower

In Europe

120 (v)  (the drop of voltage I need) when a current of 14,16 passes through to series  resistor is

V = I*R          120 = 14,16* R         R = 8,47 ohms

c) P = I*r²

1700 (w) = 14,16 (A) * r²

r² = 120,06

r = 10,96 ohms

A brick weighs 50.0 N, and measures 30.0 cm × 10.0 cm × 4.00 cm. What is the maximum pressure it can exert on a horizontal surface due to its weight?

Answers

Answer:

Pressure, P = 1250 Pa

Explanation:

Given that,

Weight of a brick, F = 50 N

Dimension of the brick is 30.0 cm × 10.0 cm × 4.00 cm

We need to find the maximum pressure it can exert on a horizontal surface due to its weight. Pressure is equal to the force acting per unit area. Pressure exerted is inversely proportional to the area of cross section. So, we need to minimize area. Taking to smaller dimensions.

A = 40 cm × 10 cm = 400 cm² = 0.04 m²

So,

Pressure,

[tex]P=\dfrac{50\ N}{0.04\ m^2}\\\\P=1250\ Pa[/tex]

So, the maximum pressure of 1250 Pa it can exert on a horizontal surface.

The maximum pressure it can exert on a horizontal surface due to its weight will be 1250 Pascal.

What is pressure?

The force applied perpendicular to the surface of an item per unit area across which that force is spread is known as pressure. It is denoted by P.

The given data in the problem is;

W is the weight of a brick = 50 N

The dimension of the brick = 30.0 cm × 10.0 cm × 4.00 cm

A is the area,

The area is found as;

A=40 cm × 10 cm = 400 cm² = 0.04 m²

The pressure is the ratio of the force and area

[tex]\rm P = \frac{F}{A} \\\\ \rm P = \frac{50}{0.04} \\\\ \rm P =1250 \ Pascal[/tex]

Hence the maximum pressure it can exert on a horizontal surface due to its weight will be 1250 Pascal.

To learn more about the pressure refer to the link;

https://brainly.com/question/356585

When water freezes, it expands about nine percent. What would be the pressure increase inside your automobile engine block if the water in there froze? The bulk modulus of ice is 2.0 × 109 N/m2, and 1 ATM = 1.01 × 105 N/m2.

Answers

Answer:

The pressure increase inside the automobile engine block is 1782.18 ATM

Explanation:

Given;

the change in volume of water, ΔV = 9%

the bulk modulus of ice, K = 2 x 10⁹ N/m²

Bulk modulus is given by;

[tex]K = -V\frac{dP}{dV}[/tex]

for pressure increase in the automobile engine block, when the water in there froze;

[tex]dP = K(\frac{dV}{V} )\\\\dP = K(\frac{0.09V}{V} )\\\\dP = 0.09K\\\\dP = 0.09 (2*10^9)\\\\dP = 1.8 *10^{8} \ N/m^2\\\\dP = 1782.18 \ ATM[/tex]

Therefore,  the pressure increase inside the automobile engine block is 1782.18 ATM

The pressure increase inside your automobile engine block will be 1782.18 atm. The force involved vertical to the surface of an object per unit area is pressure.

What is pressure?

The force applied perpendicular to the surface of an item per unit area across which that force is spread is known as pressure.

It is denoted by P. The pressure relative to the ambient pressure is known as gauge pressure.

The given data in the problem is;

ΔV is the  change in volume of water = 9%

K is the bulk modulus of ice = 2 x 10⁹ N/m²

dP is the change in the presure=?

The bulk modulus is found as;

[tex]\rm K=-V \frac{dp}{dv} \\\\[/tex]

The change in the presure is obtained as;

[tex]\rm dP = K\frac{dV}{V} \\\\ \rm dP = K\frac{0.09V}{V} \\\\ \rm dP = 0.09 K \\\\ \rm dP = 0.09 \times 2 \times 10^9 \\\\ \rm dP = 1.8 \times 10^8 \\\\ \rm dP =1782.18 \ atm[/tex]

Hence the pressure increase inside your automobile engine block will be 1782.18 atm.

To learn more about the pressure refer to the link;

https://brainly.com/question/356585

An electron moving at 3.94 103 m/s in a 1.23 T magnetic field experiences a magnetic force of 1.40 10-16 N. What angle does the velocity of the electron make with the magnetic field? There are two answers between 0° and 180°. (Enter your answers from smallest to largest.)

Answers

Answer:

10.4⁰ and 169.6⁰

Explanation:

The force experienced by the moving electron in the magnetic field is expressed as F = qvBsinθ where;

q is the charge on the electron

v is the velocity of the electron

B is the magnetic field strength

θ is the angle that the velocity of the electron make with the magnetic field.

Given parameters

F =  1.40*10⁻¹⁶ N

q = 1.6*10⁻¹⁹C

v = 3.94*10³m/s

B = 1.23T

Required

Angle that the velocity of the electron make with the magnetic field

Substituting the given parameters into the formula:

1.40*10⁻¹⁶ =  1.6*10⁻¹⁹ * 3.94*10³ * 1.23 * sinθ

1.40*10⁻¹⁶ = 7.75392 * 10⁻¹⁹⁺³sinθ

1.40*10⁻¹⁶ = 7.75392 * 10⁻¹⁶sinθ

sinθ = 1.40*10⁻¹⁶/7.75392 * 10⁻¹⁶

sinθ = 1.40/7.75392

sinθ = 0.1806

θ = sin⁻¹0.1806

θ₁ = 10.4⁰

Since sinθ is positive in the 1st and 2nd quadrant, θ₂ = 180-θ₁

θ₂ = 180-10.4

θ₂ = 169.6⁰

Hence, the angle that the velocity of the electron make with the magnetic field are 10.4⁰ and 169.6⁰

Other Questions
An_ is the set of numbers that include negative numbersand the subset of_ numbers (...-3, -2, -1, 0, 1, 2, 3...). Alsodescribed as positive numbers and their opposites and zero.Blank 1:Blank 2: the left side of the (A. spinal cord, B. cerebrum, C. cerebellum) controls the right side of the body. thank youuu Over the past year Lauren has repeatedly experienced symptoms that she believes indicate a heart attack, sending her to the emergency room complaining of dizziness, inability to catch her breath, and heart palpitations. She tells her parents she is afraid she's going to die, although doctors have found nothing physically wrong. From her symptoms, it is likely that Lauren is experiencing: 20. A pool holds 1440 CUBIC feet of water, the atycharges $). 15 per cubic meter of waterused now, much will it cost to fill the pool? Joshua remembered he had a coupon in his pocket that would take and additional 30%off the price of the shirts. Calculate the new total cost of the shirts including a sales tax of 6.5% Can somebody translate this (correct) to Chinese: - I am looking for a tutor or I want to tutor in China - This group is intended for anyone who wants to give or receive tutoring in the Ireland. This group only serves for the first contact between students, pupils and their parents for every educational level. Also for every other subject that has to do with tutoring. Enter your REGION in capital letters, followed by your TARGET GROUP and the additional INFO. The price is mutually negotiable and depends on various factors such as subject, age, distance, etc. - New! Are you looking for a tutor or do you want to tutor in China? Join the group below! Convert 59800 kilograms to pounds Skolits Corp. has a cost of equity of 11.1 percent and an aftertax cost of debt of 4.65 percent. The company's balance sheet lists long-term debt of $375,000 and equity of $635,000. The company's bonds sell for 105.5 percent of par and market-to-book ratio is 3.01 times. If the company's tax rate is 35 percent, what is the WACC "How much NH4Cl, when present in 2.00 liters of 0.200 M ammonia, will give a solution with pH = 8.20? For NH3, Kb = 1.8 x 10-5" What tools would historians use to understand Alexander the great died In a company's annual report, the section called Management Discussion and Analysis provides critical information for interpreting the financial statements and assessing the future of the company.A. TrueB. False A poem is the very image of life expressed in its eternaltruth. There is this difference between a story and apoem, that a story is a catalogue of detached facts, whichhave no other connexion than time, place, circumstance,cause and effect; the other is the creation of actionsaccording to the unchangeable forms of human nature, asexisting in the mind of the Creator, which is itself theimage of all other minds.- "A Defence of Poetry,"Percy Bysshe ShelleyAccording to the passage, what is the differencebetween a poem and a story?O A poem is difficult to read, while a story isentertainingO A poem includes facts, while a story focuses onhuman nature.O A poem is timeless, while a story is tied to aparticular place and time. Which formula used in probability to find Independence question 1.Solve by factorization method: x+1/x=11 1/11 2.Comment on the nature of roots for 4x^2-5=2(x+1)^2-7 plz, help... ___ menos problemas de salud con menos contaminacin del aire. A. Hara B. Haya C. Habr D. Habra Global Engineering's actual operating income for the current year is $50,000. The flexible budget operating income for actual volume achieved is $40,000, while the static budget operating income is $53,000. What is the sales volume variance for operating income Which of the following is the correct way to rewrite the following fragment A bicycle has a momentum of 36 kg m/s and a velocity of 4 m/s. What is the mass of the bicycle? 9 kg 32 kg 40 kg 144 kg Rules requiring that only English be spoken at a place of work, even when it is not a business necessity to restrict the use of other languages, reflect Group of answer choices How to simplify this expression??