Suppose a student completes an experiment with an average value of 2.9 mL and a calculated standard deviation of 0.71 mL. What is the minimum value within a 1 SD range of the average

Answer:

0 g.

Explanation:

Hello,

In this case, since the reaction between methane and oxygen is:

[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]

If 0.963 g of methane react with 7.5 g of oxygen the first step is to identify the limiting reactant for which we compute the available moles of methane and the moles of methane consumed by the 7.5 g of oxygen:

[tex]n_{CH_4}=0.963gCH_4*\frac{1molCH_4}{16gCH_4}=0.0602molCH_4\\ \\n_{CH_4}^{consumed}=7.5gO_2*\frac{1molO_2}{32gO_2}*\frac{1molCH_4}{2molO_2} =0.117molCH_4[/tex]

Thus, since oxygen theoretically consumes more methane than the available, we conclude the methane is the limiting reactant, for which it will be completely consumed, therefore, no remaining methane will be left over.

[tex]left\ over=0g[/tex]

Regards.

Answer:

Option B. 3–methylheptane.

Explanation:

To obtain the name of the compound given in the question above, we must

1. Determine the functional group of the compound.

2. Locate the longest continuous carbon chain. This gives the parent name of the compound.

3. Identify the substituent groups attached.

4. Locate the position of the substituent group attached by giving it the lowest possible count.

5. Combine the above to obtain the name.

Now let us name the compound given in the question above.

1. The compound is an alkane since it contains only single bond.

2. The longest continuous carbon chain is 7. Hence the parent name I the compound is heptane.

3. The substituent group attached is

—CH3 i.e methyl.

4. The substituent group attached is at carbon 3.

5. Therefore, the name of the compound is:

3–methylheptane.

Answer:

-434.14 kJ

Explanation:

Step 1: Write the balanced equation

4 NH₃(g) + 5 O₂(g) ⇒ 4 NO(g) + 6 H₂O(g)

Step 2: Calculate the standard free energy change (ΔG°r) for the reaction

We will use the following expression.

ΔG°r = 4 mol × ΔG°f(NO(g)) + 6 mol × ΔG°f(H₂O(g)) - 4 mol × ΔG°f(NH₃(g)) - 5 mol × ΔG°f(O₂(g))

ΔG°r = 4 mol × (86.55 kJ/mol) + 6 mol × (-228.57 kJ/mol) - 4 mol × (-16.45 kJ/mol) - 5 mol × (0 kJ/mol)

ΔG°r = -959.42 kJ

Step 3: Calculate the standard free energy change for 1.81 moles of NH₃

959.42 kJ are released per 4 moles of NH₃.

[tex]\frac{-959.42 kJ}{4mol} \times 1.81mol = -434.14 kJ[/tex]

Answer:

Boiling

Explanation:

When a liquid is heated, the vapor pressure rises steadily. When water attains a temperature of 100°C or 212°F its vapor pressure is now equal to the atmospheric pressure at sea level, this is what we mean by boiling.

When this occurs, water continues to evaporate untill the vapor pressure inside the bubbles becomes high enough to stop water bubbles from collapsing again from the pressure of the water around it so the bubbles rise and break the surface.

Answer:

[tex]H_2O[/tex]

Explanation: Research has proven that ;

Water is a Polar Covalent Molecule

It consists of 2 Hydrogen molecules bonded to one Oxygen molecule and  the two hydrogen atoms are not evenly distributed around the oxygen atom.

Explanation:

C5H10O2 + NaOH = C2H5COONa + C2H5OH

your result are : sodium propanoate and ethanol

A balanced chemical equation represents atoms and their numbers with their charge. The balanced equation for base hydrolysis is C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH.

Base hydrolysis is the splitting of the ester linkage by the basic molecule. As the result the acidic ester portion makes the salt, and also alcohol is produced as the by-product.

The base hydrolysis of methyl butanoate is shown as,

C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH

Here, sodium propanoate and ethanol are produced by the splitting of methyl butanoate in the presence of the base (NaOH).

Therefore, C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH is balanced reaction.

Learn more about hydrolysis here:

https://brainly.com/question/22078321

#SPJ2

Answer: D - 126.4g

Explanation:  

% Yield = Actual Yield/Theoretical Yield

38% = Actual Yield/332.5

38/100 = Actual Yield/332.5

(.38)(332.5) = 126.35 g = 126.4 g Actual Yield

Answer:

is D. the correct answer

Explanation:

I'm not sure if it is. Please let me know if I'm mistaking.

Answer:

pH of the solution is 2.0

Explanation:

The lactic acid is a weak acid that is in equilibrium with water as follows:

Lactic acid + H2O ⇄ Lactate + H₃O⁺

And Ka for lactic acid: 1.38x10⁻⁴

Ka = 1.38x10⁻⁴ = [Lactate] [H₃O⁺] / [Lactic acid]

Initial concentration of lactic acid is (MW: 112.06g/mol):

80g * (1mol / 112.06g) / 1L = 0.714M

The equilibrium concentration of the species in the equilibrium are:

[Lactate] = X

[H₃O⁺] = X

[Lactic acid] = 0.714-X

Replacing in Ka expression:

1.38x10⁻⁴ = [X] [X] / [0.714-X]

9.8532x10⁻⁵ -  1.38x10⁻⁴X = X²

9.8532x10⁻⁵ -  1.38x10⁻⁴X - X² = 0

Solving for X:

X = -1.0x10⁻². False solution, there is no negative concentrations

X = 9.86x10⁻³M. Right solution.

As [H₃O⁺] = X

[H₃O⁺] = 9.86x10⁻³M

and pH = -log [H₃O⁺] = -log 9.86x10⁻³M

pH = 2.0

Answer:

4.84g of FeO is the theoretical yield

Explanation:

The Iron, Fe(s), reacts with oxygen, O₂(g), producing Iron (II) oxide, as follows:

2Fe(s) + O₂(g) → 2FeO

Theoretical yield is the yield of a reaction in which you assume the 100% of reactants is converted in products.

To find theoretical yield we need to find moles of Iron, and, knowing 2 moles of Fe produce 2 moles of FeO (Ratio 1:1), we can find theoretical yield of FeO as follows:

Moles Fe (Molar mass: 55.845g/mol)

Using the molar mass of the compound we can convert grams to moles, thus:

3.76g Fe × (1mol / 55.845g) = 0.0673 moles of Fe

Moles and mass of FeO

As there are in reaction 0.0673 moles Fe, assuming a theoretical yield (And as ratio of the reaction is 1:1), you will obtain 0.0673 moles of FeO.

Theoretical yield is given in grams, As molar mass of FeO is 71.844g/mol, theoretical yield of the reaction is:

0.0673 moles FeO × (71.844g / mol) =

Answer:

А It is hard because its ions are held together by strong electrostatic attractions.

B It is malleable because its atoms can easily move past one another without disrupting the bonding.  

Explanation:

These are correct explanations of the properties of magnesium.

C is wrong. Mg is a good conductor of electricity and it has metallic bonds.

D is wrong. Mg has no molecules. It has no intermolecular forces.

Answer:

I would say c) a closed circuit.

Hope I was right.

Answer:

All chemical reactions involve energy. Energy is used to break bonds in reactants, and energy is released when new bonds form in products. Endothermic reactions absorb energy, and exothermic reactions release energy. The law of conservation of energy states that matter cannot be created or destroyed.

Answer:

THE MOLAR HEAT CAPACITY OF HEXANE IS 290.027 J/ C

Explanation:

1604 J of heat is added to 48.9 g of hexane

To calculate the molar heat capacity of hexane, it is important to note that the molar heat capacity of a substance is the measure of the amount of heat needed to raise 1 mole of a substance by 1 K.

Since 1604 J of heat = 48.9 g of hexane

Molar mass of hexane = 86 g/mol = 1 mole

then;

1604 J = 48.9 g

x = 86 g

x = 1604 * 86 / 48.9

x = 4205.4 J

Hence, 4205.4 J of heat will be added to 1 mole or 86 g of hexane to raise the temperature by 14.5 C.

In other words,

heat = molar heat capacity * temperature change

molar heat capacity = heat/ temperature change

Molar heat capacity = 4205.4 J / 14.5 C

Molar heat capacity = 290.027 J/C

The molar heat capacity of hexane is 290.027 J/ C

Answer:

[tex]T_b=-88.48\°C[/tex]

Explanation:

Hello,

In this case, since the entropy of vaporization is defined in terms of the enthalpy of vaporization and the boiling point of the given substance, nitrous oxide, as shown below:

[tex]\Delta _{vap}S=\frac{\Delta _{vap}}{T_b}[/tex]

Solving for the boiling point of nitrous oxide, we obtain:

[tex]T_b=\frac{\Delta _{vap}H}{\Delta _{vap}S}=\frac{16.53\frac{kJ}{mol}*\frac{1000J}{1kJ} }{89.51\frac{J}{mol} } \\ \\T_b=184.67K[/tex]

Which in degree Celsius is also:

[tex]Tb=184.67-273.15\\\\T_b=-88.48\°C[/tex]

Best regards.

Answer:

[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]

Explanation:

Let recall the crystal structure of CsBr obtains a BCC structure. In a BCC structure, there exist only two atom per cell.

The density d of CsBr in g/cm³ can be calculated by using the formula:

[tex]\mathtt{ density \ d = \dfrac{z \times molar\ mass \ (M)}{ edge \ length \ (a) \ \times avogadro's \ number \ (N)}}[/tex]

where;

z = 1 mole of CsBr

edge length = 428.7 pm = (4.287 × 10⁻⁸)³ cm

molar mass of CsBr = 212.81 g/mol

avogadro's number = 6.023 × 10²³

[tex]\mathtt{ density \ d = \dfrac{1 \times 212.81}{(4.287 \times 10^{-8})^3 \times 6.023 \times 10^{23}}}[/tex]

[tex]\mathtt{ density \ d = \dfrac{ 212.81}{47.4540533}}[/tex]

[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]

The total kinetic energy of a body is known as Thermal energy. Option A

Thermal energy is the direct sum of all the available random kinetic energies of molecules.

Also note that thermal energy is directly proportional to temperature in Kelvin.

Thus, the total kinetic energy of a body is known as Thermal energy. Option A

Learn more about thermal energy here:

https://brainly.com/question/19666326

#SPJ1

Answer:

A.) Thermal energy

Explanation:

I got it correct on founders edtell

Answer:

Depends on the chemicals.

Explanation:

The creation of something depends on the chemical we have. If I have chemicals such as acid and base so I can produce salt and water by mixing acid and base. If I have ethanol, vegetable oil and sodium hydroxide which is  a catalyst, I can produce biodiesel which can be used in vehicles instead of fossil fuel. If I have sodium element and chlorine gas, I can produce sodium chloride also known as table salt.

Answer:

-170.65

188.8+ 256.8-205.8-(2x205.2)

-170.65 is the entropy change.

Entropy trade is the phenomenon that is the measure of change of disorder or randomness in a thermodynamic gadget. It is associated with the conversion of heat or enthalpy completed in work. A thermodynamic device that has extra randomness means it has high entropy.

Subtract the sum of the absolute entropies of the reactants from the sum of the absolute entropies of the products, each extended by using their suitable stoichiometric coefficients, to reap ΔS° for the reaction.

Learn more about entropy change here: https://brainly.com/question/14257064

#SPJ2

Answer:

15. Critical angle of glass and water combination, θ = 62.45°

16. Critical angle for the interface between Mystery A and glass, θ = 37.93°

Note; The question is incomplete. The complete question is as follows:

Medium Air Water Glass Mystery A Mystery B Table-2 Speed (m/s) 1.00 C 0.75 c 0.67 0.41 c 0.71 c n 1.00 1.33 1.50 Index of Refraction n of a given medium is defined as the ratio of speed of light in vacuum, c to the speed of light in a medium, v. n = c/v

Table-4: Incident Angle (degrees) Reflected Angle Refracted angle (degrees) (degrees) % Intensity of reflected ray 0 10 20 30 40 50 N/A N/A N/A 30 40 50 0 11.3 22.7 34.2 46.3 59.5 N/A N/A N/A 0.67 1.22 3.08 % Intensity of refracted ray 100 100 100 99.33 98.78 96.92

When rays travel from a denser medium to a less dense medium, we can define a critical angle of incidence θ such that refracted angle θ₂ = 90°. Applying Snell's law: Critical angle θ = sin-1(n₂/n₁).

When the angle of incidence is greater than the critical angle, 100% of the light intensity is reflected. This is called total internal reflection because all the light is reflected.

15. Calculate the critical angle of glass and water combination. Show your calculation.

16. What is the critical angle for the interface between Mystery A and glass?

Explanation:

15.  Applying Snell's law; Critical angle θ = sin-1(n₂/n₁).

where n₂,refractive index of water = 1.33, n₁, refractive index of glass = 1.50 since glass is denser than water

θ = sin-1(1.33/1.50)

θ = 62.45°

Critical angle of glass and water combination, θ = 62.45°

16.  Refractive index of mystery A , n = c/v

where v = 0.41 c

therefore, n = c / 0.41 c = 2.44

Critical angle for the interface between Mystery A and glass, θ = sin-1(n₂/n₁).

where n₂,refractive index of glass = 1.50, n₁, refractive index of mystery A = 2.44 since mystery A is denser than glass as seen from its refractive index

θ = sin-1(1.50/2.44)

θ = 37.93°

Critical angle for the interface between Mystery A and glass, θ = 37.93°

Answer:

Companies know that people will be willing to spend more to get an in-demand product.

Explanation:

When a product is really in demand, many customers are willing to part with more money order to purchase the product, as a result of that, many companies may take advantage of the increasing demand for the product to hike it's price.

Hence, the increase in price may not really have a negative impact on the quantity demanded because the demand for the product is high and customers are willing to spend more money in order to purchase an in-demand product, hence the answer above.

Prices increase when demand is high because companies know that people will be willing to spend more to get in-demand products.

Prices generally increase with higher demand for goods because the higher demand creates pressure for the supply to meet up.

Manufacturing companies can either increase their production to meet up with demand at the same price or capitalize on the situation to make more money by increasing the price without increasing the supply.

Since there is a buying pressure on the product in the market already, people would still be open to buying even at higher prices.

More on demand and prices can be found here: https://brainly.com/question/16170198?referrer=searchResults

Answer:

This is due to the water moisture present in the recovered sample.

Explanation:

The total amount of material recovered isn’t meant to weigh more than the original sample. However when this happens then it means there is the presence of water moisture in the recovered sample.

The recovered samples however needs to be heated to make it dry and eliminate the water moisture through evaporation.

The words given are not clear, so the clear question is as follows:

Match the words below to the appropriate blanks in the sentences. Make certain each sentence is complete before submitting your answer:

A. β-1,4- and α-1,6-glycosidic

B. α-1,4-glycosidic

C. α-1,4-galactose

D. an unbranched glucose

E. a branched fructose

F. α-1,6-glycosidic

Amylose is ......... polymer of ....... units joined by ........ bonds.

Amylopectin is ....... polymer of .......units joined by ........ bonds.

Answer:

D. an unbranched glucose

C. α-1,4-galactose

B. α-1,4-glycosidic

E. a branched fructose

A. β-1,4- and α-1,6-glycosidic

F. α-1,6-glycosidic

Explanation:

Amylose and amylopectin are two types of polysaccharides that can be found in starch granules.

Amylose is linear or unbranched glucose polymer of α-1,4-galactose units that are joined by α-1,4-glycosidic.

Amylopectin is a branched fructose polymer of β-1,4- and α-1,6-glycosidic units joined by α-1,6-glycosidic bonds.

Hence, the correct answers in the sequential order are:

Amylose:

D. an unbranched glucose

C. α-1,4-galactose

B. α-1,4-glycosidic

Amylopectin:

E. a branched fructose

A. β-1,4- and α-1,6-glycosidic

F. α-1,6-glycosidic

Answer:

Electrical current drives nonspontaneous reactions in electrolytic cells.

Explanation:

Electrochemical cells are cells that produce electrical energy from chemical energy.

There are two types of electrochemical cells; voltaic cells and electrolytic cells.

A voltaic cell is an electrochemical cell in which electrical energy is produced from spontaneous chemical process while an electrolytic cell is an electrochemical cell where electrical energy is produced from nonspontaneous chemical processes. Current is needed to drive these nonspontaneous chemical processes in an electrolytic cell.

Answer:

electrolytic cells generate electricity through a non-spontaneous reaction while voltaic cells absorb electricity to drive a spontaneous reaction.

Explanation:

Answer via Educere/ Founder's Education

Answer:

B. NH3 < PH3< CH4

Explanation:

Hello,

In this case, taking into account that the boiling point of ammonia, methane and phosphorous trihydrate are -33.34 °C , -161.5 °C  and -87.7 °C , clearly, methane has the lowest boiling point (most negative) and ammonia the greatest boiling point (least negative), therefore, ranking is:

B. NH3 < PH3< CH4

Best regards.

Answer:

B) hydroxide concentration

Explanation:

Hello,

In this case, since we are talking about strong both base and acid, since the base is the titrant and the acid the analyte, once the equivalence point has been reached, some additional base could be added before the experimenter realizes about it, therefore, since the titrant is a strong base, it completely dissociates in hydroxide ions and metallic ions which allows us to compute the pOH of the solution by known the hydroxide ions concentration.

After that, due to the fact that the pH is related with the pOH as shown below:

pH=14-pOH

We can directly compute the pH.

Best regards.

According to the concept of redox reactions, the answer to this question is option C.

When the cell potential is positive. A redox reaction is spontaneous when the cell potential is positive.The cell potential is the measure of the driving force of the chemical reaction occurring in the electrochemical cell. In an electrochemical cell, a redox reaction occurs, which leads to the production of an electric potential.

If this potential is positive, then the redox reaction is considered spontaneous. However, if the potential is negative, then the reaction is non-spontaneous.In general, a redox reaction is spontaneous if the potential difference between the two electrodes of the cell is positive. This means that the reaction will occur spontaneously without any external energy input.

Thus, the correct option is C.

Learn more about redox reaction,here:

https://brainly.com/question/28300253

#SPJ4

Answer:

To calculate the [OH-] in the solution we must first find the pOH

That's

pH + pOH = 14

pOH = 14 - pH

First to find the pH we use the formula

From the question

[H3O+]= 2.6 × 10^-8 M

pH = - log 2.6 × 10^-8

pH = 7.6

pH = 8

So we pOH is

pOH = 14 - 8 = 6

To find the [OH-] we use the formula

6 = - log [OH-]

Find antilog of both sides

The solution is slightly basic since it's pH is in the basic region and slightly above the neutral point 7

Hope this helps you

Answer:

68%

Explanation:

Since we need a percentage we can use any number we want for our initial value.

5(1/2)^900/1620 = 3.40

(3.40 / 5)*100 = 68%

To make sure lets use a different initial amount

1(1/2)^900/1620 = 0.68

(0.68/1) * 100 = 68%

To solve this question, we'll assume the initial amount of radium-226 to be 1.

Now, we shall proceed to obtaining the percentage of radium-226 that will after 900 years. This can be obtained as illustrated below:

Determination of the number of half-lives that has elapsed.

Half-life (t½) = 1620 years

Time (t) = 900 years

[tex]n = \frac{t}{t_{1/2}}\\\\n = \frac{900}{1620}\\\\n = \frac{5}{9}[/tex]

Determination of the amount remaining

Initial amount (N₀) = 1

Number of half-lives (n) = 5/9

[tex]N = \frac{N_{0} }{2^{n}}\\\\N = \frac{1}{2^{5/9}}[/tex]

Determination of the percentage remaining.

Initial amount (N₀) = 1

Amount remaining (N) = 0.68

Percentage remaining = N/N₀ × 100

Percentage remaining = 0.68/1 × 100

Therefore, the percentage amount of radium-226 that remains after 900 years is 68%

Learn more: https://brainly.com/question/10406952

Answer:

(a) Chromatography

(b) DNA fingerprinting

(c) Origin

(d) Sweet C consists of more colours than sweet D.

  ii. The speed of colours in sweet C are proportional to one another, while that of colours in D is not.

Explanation:

Chromatography is one of the physical method of separating mixtures. This process composed of the ability of the constituents in a mixture to separate by virtue of rate of movement through a medium, thus separates into constituents.

It can be used to determine the soluble constituents of a given mixture. And for purification purpose.