The probability that exactly 10 out of 23 cars will not have engine failure is 0.007638.
Step-by-step explanation: First, calculate the probability of an engine failing in five years with no routine maintenance, which is 27.5%. This can be written as a decimal, 0.275.Next, calculate the probability of an engine not failing in five years with routine maintenance. This probability is 100%-27.5% = 72.5%, written as a decimal 0.725.
Now, using the Binomial Distribution formula (nCr), calculate the probability of exactly 10 engines not failing out of 23 cars, where n = 23, r = 10 and p = 0.725. The equation would be [tex](23C10)*(0.725^{10})*(0.275^{13}) = 0.0076379904[/tex]
Finally, round the result to 6 decimal places, giving an answer of 0.007638.
See more about probability at: https://brainly.com/question/13604758
#SPJ11
The number of employees for a certain company has been decreasing each year by 5%. If the company cumently has 860 employees and this rate continues, find the number of employees in 10 years
The number of employees in 10 years will be approximately
(Round to the nearest whole number as needed)
Based on the exponential decay equation, the number of employees for the company that has been decreasing yearly by 5%, will in 10 years be approximately 515.
What is exponential decay equation?The exponential decay equation or function gives the value in t years that has a constant ratio of decrease.
Exponential decay equation is one of the two exponential functions. The other is the exponential growth equation.
The annual decrease in the number of employees = 5%
The current number of employees in the company = 860
The expected time = 10 years.
The exponential decay equation is as follows, y = 860 x 0.95^10.
y = 860 x 0.95^10 = 515
Learn more about exponential functions at https://brainly.com/question/30127596
#SPJ1
In a distribution of 387 values with a mean of 72, at least 344 fall within the interval 64-80. Approximately what percentage of values should fall in the interval 56-88? Use Chebyshev’s theorem. Round your k and s values to one decimal place and final answer to two decimal places.
The required percentage of values that should fall in the interval 56-88 is approximately 74.37%.
Chebyshev’s Theorem:Chebyshev's Theorem states that, for any given data set, the proportion (or percentage) of data points that lie within k standard deviations of the mean must be at least (1 - 1/k2), where k is a positive constant greater than 1.Calculation:Given,Mean (μ) = 72N (Total number of values) = 387Interval (x) = 64-80 and 56-88Minimum values (n) = 344Minimum percentage (p) = (344 / 387) x 100 = 88.85%From the given data we have,1. Calculate the variance of the distribution,Variance = σ2 = [(n × s2 ) / (n-1)]σ2 = [(344 × 42) / 386]σ2 = 18.732. Calculate the standard deviation of the distribution,σ = √(18.73)σ = 4.33. Calculate k = (|x - μ|) / σ for the given interval 56-88,Here, x1 = 56, x2 = 88, k1 = |56-72| / 4.33 = 3.7, k2 = |88-72| / 4.33 = 3.7Thus, k = 3.74. Calculate the minimum percentage of values within the interval 56-88 using Chebyshev's Theorem,p = [1 - (1/k2)] x 100p = [1 - (1/3.7)2] x 100p = 74.37% (approximately)Therefore, the required percentage of values that should fall in the interval 56-88 is approximately 74.37%.
Learn more about Percentage
brainly.com/question/2155156
#SPJ11
Emma and Cooper went to Tico’s tacos for lunch. Emma ordered three tacos and one burrito and Cooper ordered one taco and two burritos Emmas order total was $3.65 and Cooper’s bill was $3.30. Write and solve a system of equations to model the situation above. Explain the solution in the context of this problem. Explain, or show your work in the box below.
In the given system of equations one taco costs $0.80 and one burrito costs $0.72.
What is a system of equations?An equation system is a finite collection of equations for which we searched for the common solutions. It is sometimes referred to as a set of simultaneous equations or an equation set. The classification of a system of equations is similar to that of a single equation. In modelling issues where the unknown values may be expressed in the form of variables, a system of equations finds use in everyday life.
Let us suppose the cost of one taco = x.
Let us suppose the cost of one burrito = y.
Then, for Emma we have:
3x + y = 3.65
For Cooper we have:
x + 2y = 3.30
Using elimination, multiply the first equation by 2 and subtract it from the second equation:
(2)(3x + y = 3.65)
6x + 2y = 7.30
x + 2y = 3.30
-5x = -4
x = 4/5
Substituting this value of x into either equation:
3(4/5) + y = 3.65
y = 2.15/3 ≈ 0.72
Therefore, one taco costs $0.80 and one burrito costs $0.72.
Learn more about system of equations here:
https://brainly.com/question/13760328
#SPJ1
Which of the following is equivalent to the inequality 2x + 13 < 5x - 20?
F. x >-11
G. x<?
H. x>;
J. x < 11
K. x > 11
Answer:
k
Step-by-step explanation:
2x+13<5x−20
Subtract 5x from both sides.
Combine 2x and −5x to get −3x.
Subtract 13 from both sides.
Subtract 13 from −20 to get −33.
Divide both sides by −3. Since −3 is negative, the inequality direction is changed.
x>11
Write the equation of a line perpendicular to `y=3` that goes through the point (-5, 3).
Answer:
The equation of a line perpendicular to y=3 that goes through the point (-5, 3) is: x = -5.
Step-by-step explanation:
To find the equation of a line perpendicular to y=3 that goes through the point (-5, 3), we need to remember that the slope of a line perpendicular to another line is the negative reciprocal of the slope of the original line.
The equation y=3 is a horizontal line that goes through the point (0,3), and its slope is zero. The negative reciprocal of zero is undefined, which means that the line perpendicular to y=3 is a vertical line.
To find the equation of this vertical line that goes through the point (-5, 3), we can start with the point-slope form of a linear equation:
y - y1 = m(x - x1)
where m is the slope of the line and (x1, y1) is a point on the line. Since the line we want is vertical, its slope is undefined, so we can't use the point-slope form directly. However, we can still write the equation of the line using the point (x1, y1) that it passes through. In this case, (x1, y1) = (-5, 3).
The equation of the vertical line passing through the point (-5, 3) is:
x = -5
This equation tells us that the line is vertical (since it doesn't have any y term) and that it goes through the point (-5, 3) (since it has x=-5).
So, the equation of a line perpendicular to y=3 that goes through the point (-5, 3) is x = -5.
Answer:
x= -5
Step-by-step explanation:
The perpendicular line is anything with x= __.
x= -5 however, will go through the point (-5, 3) and that is our answer.
Determine what number to multiply the first equation by to form opposite terms for the x-variable.
2
5
x + 6y = -10
–2x – 2y = 40
Multiplying the first equation by
will create opposite x terms
To create opposite x terms, we need to multiply the first equation by -5.
How to choose what term to multiply the first equation?
To choose what term to multiply the first equation, we need to consider the coefficients of the variable that we want to eliminate (in this case, the x variable) in both equations. Our goal is to create opposite terms for that variable in the two equations, so that when we add or subtract the equations, that variable will be eliminated.
Determining the number to multiply the first equation by to form opposite terms for the x-variable :
In this case, the coefficient of x in the first equation is 2/5, and the coefficient of x in the second equation is -2.
To create opposite terms for x, we need to find a constant that, when multiplied by the first equation, will result in a coefficient of x that is the negative of the coefficient of x in the second equation (i.e., -2).
To do this, we can divide the coefficient of x in the second equation by the coefficient of x in the first equation, and then multiply the entire first equation by the resulting constant.
In this case, we have:
[tex](-2)/(2/5) = -5[/tex]
Multiplying the first equation by -5 gives:
[tex]-5(2/5)x + (-5)6y = -5(-10)[/tex]
which simplifies to:
[tex]-2x - 30y = 50[/tex]
Now we have two equations with opposite x terms:
[tex]-2x - 4y = 40[/tex]
[tex]-2x - 30y = 50[/tex]
To know more about equations visit :
brainly.com/question/17149704
#SPJ1
The total resistance of a circuit is given by the formula RT = +
R1 = 4 + 6i ohms and R2 = 2 − 4i ohms. What is RT?
The total resistance of the circuit is 6 + 2i.
Resistance is a unit of measurement for the resistance to current flow in an electrical circuit. The Greek letter omega () represents the unit of measurement for resistance, which is ohms.
Georg Simon Ohm (1784–1854), a German physicist who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance known as an ohm.
The amount of opposition any object applies to the flow of electric current is known as resistance. A resistor is an electrical component utilised in the circuit to provide that particular level of resistance. R = V I is a formula used to calculate an object's resistance.
given :
R1 = (4 + 6i)
R2 = (2 - 4i)
total resistance of the circuit is
R = R1 + R2
= (4 + 6i) + (2 - 4i)
= 6 + 2i
To know more about resistance , click the below link
https://brainly.com/question/30799966
#SPJ4
The equation RT = + R1 = 4 + 6i ohms and R2 = 2 4i ohms, RT = 6 - 2i ohms, determines the circuit's total resistance.
R1 and R2 are added to determine RT: RT = R1 + R2.
The actual components added together give us 4 + 2 = 6.
When we add the fictitious parts, we obtain 6i - 4i = 2i.
RT is thus equal to 6 - 2i ohms.
To put it another way, the circuit's total resistance is a complex number containing a real component of 6 ohms and an imaginary component of -2 ohms. This shows the combined impact of the circuit's resistances R1 and R2. When a constant voltage differential of one volt (V) is supplied to two conductor points and a current of one ampere (A) results, the resistance between those points is measured in ohms. It is comparable to one volt for every ampere (V/A), to put it simply.
learn more about ohms here:
https://brainly.com/question/29750972
#SPJ4
find the length of the cord pt.3
According to the circle theorem, we can find the length of the cord, x = 4 units.
Define circle theorem?Geometrical assertions known as "circle theorems" set forward significant conclusions pertaining to circles. These theorems provide significant information regarding several aspects of a circle.
A circle's chord is a line segment that hits the circle twice on its edge, separating it into two equal pieces. The circle is divided into two equal pieces by the longest chord of the circle, which runs through its centre.
Here in the given circle,
As per the intersecting chords theorem,
AB × CB= BE × BD
⇒ 6 × 6 = 9× x
⇒ x = 36/9=4
Therefore, the length of the chord, x = 4 units.
To know more about circle theorem, visit:
https://brainly.com/question/19906313
#SPJ1
a box contains 75 red marbles, 37 white marbles, and 19 blue marbles if a marble is randomly selected from the box, what's the probability that it is not blue
The probability that it the marble taken out of the box is not blue is [tex]\frac{112}{131}[/tex].
What is the probability?Probability is a branch of math that studies the chance or likelihood of an event occurring.
There are [tex]75[/tex] red marbles, [tx]37[/tex] white marbles, and [tex]19[/tex] blue marbles.
If a marble is randomly selected from the box, we have to find the probability that it is not blue.
Then the total number of marbles = [tex]75 + 37 + 19 = 131.[/tex]
The probability that a marble is not blue:-
[tex]P[/tex](Not blue) = [tex]P[/tex](Red or White)
[tex]P[/tex](Red or White) = [tex]\frac{(75 + 37)}{131}[/tex]
[tex]P[/tex](Red or White) = [tex]\frac{112}{ 131}[/tex]
[tex]P[/tex](Not blue) = [tex]1 - P[/tex](Blue)
[tex]P[/tex](Not blue) = [tex]1 - \frac{19}{131}[/tex]
[tex]P[/tex](Not blue) = [tex]\frac{112}{ 131}[/tex]
Therefore, the probability that a marble selected from the box is not blue is [tex]\frac{112}{131}[/tex].
Learn more about Probability here:
https://brainly.com/question/30034780
#SPJ11
Given that the number 33,554,432 is equal to 2^25 , explain how you know that 33,554,432 is not a square number
First of all, perfect squares do not end in 2.
The exponent has to be an even number when 2 is the base. For example 2^8 = 64. 8 is an even number. So 64 is a square number.
By rounding to 1 significant figure , estimate the answer to the questions
216×876
The rounding of the number to 1 significant figure is-
216 × 876 = 180000
What is defined as the significant figure?The term significant figures describes the number of significant single digits (0 to several 9 inclusive) in a scientific notation coefficient.The number of significant figures inside an expression indicates the degree of certainty or precision with where an engineer or scientist states a number.All zeros to the right of the decimals but to the left of a non-zero number in a decimal number between 0 and 1 are not significant.0.00247, for example, only has three significant figures.216 × 876
This number can be written in form of rounding to 1 significant figure as;
200 × 900 = 180000
To know more about the significant figure, here
https://brainly.com/question/293578
I NEED YOUR HELP ASAP!!
To create a modified box plot for a data set, determine the outliers of the data set and the smallest and largest numbers in the data set that are not outliers. Next, determine the median of the first half of the data set, the median of the entire data set, and the median of the second half of the data set.
What are the values that are needed to create a modified box plot for this data set?
19, 15, 22, 35, 16, 22, 4, 22, 24, 16, 17, 21
Enter your answers in the blanks in order from least to greatest.
Smallest number in the data set that is not an outlier is 15, Median of the first half is 17, Median of the entire data set is 20.5. Median of the second half is 22. Largest number in the data set that is not an outlier is 35.
Give a short note on Median?
In statistics, the median is a measure of central tendency that represents the middle value in a dataset. To find the median, the data must first be sorted in ascending or descending order. If the dataset contains an odd number of values, the median is the middle value. If the dataset contains an even number of values, the median is the average of the two middle values.
The median is a useful measure of central tendency in datasets that are skewed or have outliers, as it is less sensitive to extreme values than the mean. It is also useful in datasets with non-numeric values, such as rankings or survey responses.
To create a modified box plot, we need the following values:
The smallest number in the data set that is not an outlier: 15
The median of the first half of the data set: 17
The median of the entire data set: 20.5
The median of the second half of the data set: 22
The largest number in the data set that is not an outlier: 35
So the values needed to create a modified box plot for this data set are: 15, 17, 20.5, 22, 35.
A triangle is equal in area to a rectangle which measures 10cm by 9cm. If the base of the triangle is 12cm long, find its altitude
Answer:
h = 15 cm
Step-by-step explanation:
Area of triangle equals the area of rectangle. As the dimensions of the rectangle is given, we can first find the area of the rectangle.
[tex]\boxed{\bf Area \ of \ the \ rectangle = length * width}[/tex]
= 10 * 9
= 90 cm²
Area of triangle = area of rectangle
= 90 cm²
base of the triangle = b = 12 cm
[tex]\boxed{\bf Area \ of \ triangle = \dfrac{1}{2}bh}[/tex] where h is the altitude and b is the base.
[tex]\bf \dfrac{1}{2} b* h = 90 \\\\\dfrac{1}{2}*12* h = 90[/tex]
[tex]\bf h = \dfrac{90*2}{12}\\\\\boxed{\bf h = 15 \ cm}[/tex]
The shedding frequency based on the analysis of Question 3 is to be determined through the use of a small-scale model to be tested in a water tunnel. For the specific bridge structure of interest D=20 cm and H=300 cm, and the wind speed V is 25 m/s. Assume the air is at MSL ISA conditions. For the model, assume that Dm =2 cm. (a) Determine the length of the model Hm needed for geometric scaling. (b) Determine the flow velocity Vm needed for Reynolds number scaling. (c) If the shedding frequency for the model is found to be 27 Hz, what is the corresponding frequency for the full-scale structural component of the bridge? Notes: Refer to the eBook for the properties of air. Assume the density of water
rhoH2O = 1000 kg/m3 and the dynamic viscosity of water μH2O =1×10^−3 kg/m/s
Answer:
Step-by-step explanation:
What property of real numbers does each statement demonstrate? (3 + 4) + 1 = 3 + (4 + 1)
Answer: Associative property
Step-by-step explanation:
The definition of the associative property is the answer is the same no matter how the terms are grouped. Hope this helped!
Enter the values needed to find the
length BC. (Simplify your answer.)
A (-5x, 4y)
B (-2x, -4y)
BC=√([?])² + (3y)²
C (7x, -1y)
Distance Formula
d = √√(x₂ − ×₁)² + (y₂ − y₁)²
The missing value to find the length of BC is 9x.
What is distance formula?The distance formula is a formula for calculating the separation in coordinates between two places. It is provided by and deduced from the Pythagorean theorem by:
distance = √((x₂ - x₁)² + (y₂ - y₁)²)
The distance formula is used to compute distances between objects or places in many disciplines, including geometry, physics, and engineering.
The distance formula is given as:
distance = √((x₂ - x₁)² + (y₂ - y₁)²)
Substituting the values of the coordinates of B and C we have:
distance = √((7x - (-2x))² + (-1y - (-4y))²)
distance = √((9x)² + (3y)²)
distance = √(81x² + 9y²)
distance = 3√(9x² + y²)
Hence, the missing value to find the length of BC is 9x.
Learn more about distance formula here:
https://brainly.com/question/28956738
#SPJ1
About 24% of flights departing from New York's John F. Kennedy International Airport were delayed in 2009. Assuming that the chance of a flight being delayed has stayed constant at 24%, we are interested in finding the probability of 10 out of the next 100 departing flights being delayed. Noting that if one flight is delayed, the next flight is more likely to be delayed, which of the following statements is correct? . (A) We can use the geometric distribution with n = 100, k = 10, and p = 0.24 to calculate this probability. (B) We can use the binomial distribution with n = 10, k = 100, and p = 0.24 to calculate this probability. (C) We cannot calculate this probability using the binomial distribution since whether or not one flight is delayed is not independent of another. (D) We can use the binomial distribution with n = 100, k = 10, and p = 0.24 to calculate this probability
The statement that is correct is (D) We can use the binomial distribution with n = 100, k = 10, and p = 0.24 to calculate this probability.
The binomial distribution can be used to calculate the probability of a certain number of successes in a given number of trials, where each trial has a fixed probability of success.
The probability of a flight being delayed is 0.24, and the probability of a flight not being delayed is 0.76. Therefore, the probability of exactly 10 flights out of 100 being delayed can be calculated using the binomial distribution with n = 100, k = 10, and p = 0.24.
Learn more about binomial distribution here: https://brainly.com/question/30049535
#SPJ11
In the morning 134 books were checked out from the library.in the afternoon 254 books were checked out and 188 books were checked out in the evening.how many books were checked out in the library that day?
Answer:
576 books.
Step-by-step explanation:
134+254+188=576 books in total.
Answer:
576
Step-by-step explanation:
This is literally easy!
Checked books are 134 + 254 + 188 = 576
a general principle in the field of tests and measurements is that longer tests tend to be more reliable than shorter ones. in your opinion, is that principle illustrated by the reliability coefficients shown in the table?
This principle is validated by the data shown in the table.
Tests and measurements is an essential aspect of the education process as it enables educators to gauge the level of knowledge and skills their students have acquired. The principle that longer tests tend to be more reliable than shorter ones has some merit because it allows educators to assess a broader range of skills and knowledge, which increases the validity of their assessments.In my opinion, the principle that longer tests tend to be more reliable than shorter ones is illustrated in the reliability coefficients shown in the table. This is because the data shows that the reliability coefficients for longer tests are consistently higher than those for shorter tests. Additionally, the results for the 10-item test indicate a higher reliability coefficient compared to the 5-item test, which supports the notion that longer tests are more reliable than shorter ones.The table displays that the longer tests have higher reliability coefficients compared to the shorter tests. For example, in the 5-item test, the reliability coefficient is .45, while the 10-item test's reliability coefficient is .73. This shows that the 10-item test is more reliable than the 5-item test, as the higher reliability coefficient indicates that the assessment is consistent in measuring the skill or knowledge it is intended to measure. As a result, this principle is validated by the data shown in the table.
Learn more about principle
brainly.com/question/30388578
#SPJ11
Suppose f is a continuous function defined on a rectangle R=[a,b]X[c,d]. What is the geometric interpretation of the double integral over R of f(X,y) if f(X,y)>0
If f(x,y) > 0 and is a continuous function defined over a rectangle R=[a,b]x[c,d], then the double integral over R of f(x,y) can be interpreted as the volume of a solid that lies in the first octant and under the graph of the function f(x,y) over the region R.
The geometric interpretation of the double integral over R of f(x,y) if f(x,y) > 0, where f is a continuous function defined on a rectangle R = [a,b] × [c,d] is given as follows:
The double integral of f(x,y) over R, if f(x,y) > 0, gives the volume under the graph of the function f(x,y) over the region R in the first octant.
Consider a point P (x, y, z) on the graph of f(x, y) that is over the region R, and let us say that z = f(x,y). If f(x,y) > 0, then P is in the first octant (i.e. all its coordinates are positive).
As a result, the volume of the solid that lies under the graph of f(x,y) over the region R in the first octant can be found by integrating the function f(x,y) over the rectangle R in the xy-plane, which yields the double integral.
The following formula represents the double integral over R of f(x,y) if f(x,y) > 0:
∬Rf(x,y)dydx
The geometric interpretation of the double integral over R of f(x,y) if f(x,y) > 0 is given by the volume of the solid that lies under the graph of the function f(x,y) over the region R in the first octant.
To know more about the "continuous function": https://brainly.com/question/30089593
#SPJ11
Line A has a y-intercept of 3 and is perpendicular to the line given by
y = 5x + 2.
What is the equation of line A?
Give your answer in the form y = mx + c, where m and c are integers or
fractions in their simplest forms.
Answer:
Step-by-step explanation:
The given line is y = 5x + 2. We know that any line perpendicular to this line will have a slope that is negative reciprocal of 5. The negative reciprocal of 5 is -1/5.
Line A is perpendicular to y = 5x + 2, so it has a slope of -1/5. We also know that the y-intercept of line A is 3. Therefore, the equation of line A can be written as:
y = (-1/5)x + 3
or in the form y = mx + c, where m = -1/5 and c = 3.
how can i slove this??
Answer:
[tex]5x {}^{3} - x + 5x + 2[/tex]
Step-by-step explanation:
Greetings!!!
So to find the sum of (f+g)(x) just simply add these two functions
f(x)+g(x)3x²+5x-2+(5x³-4x²+4)Add like terms together
5x³-x²+5x+2If you have any questions tag it on comments
Hope it helps!!!
Write a quadratic function in standard form to represent the data in the table.
Ordered pairs arranged in a table. From left to right the pairs are: 2, 3, and 4, 1, and 6, 3, and 8, 9, and 10, 19.
y = x2 − x +
Can someone help me with this math problem pls! #Percents
Answer: $3.64
Step-by-step explanation:
At the store, you buy four toys for $1.5, which means you pay $1.5 * 4, or $6.
Then, you calculate the sales tax, which is 6%, which means you multiply $6 by (100% + 6%), or $6*(1.06) which is $6.36.
Finally, if you hand the cashier $10, and you spent $6.36, your change is $10 - $6.36, which is $3.64.
1) Adam wants to buy a home priced at $215,000. The bank requires him to make a 5% down payment and
he will finance the rest for 30 years at 4.5% interest. He has to also pay the closing costs below. Find the
a) the down payment b) the amount of the mortgage c) the closing costs d) the amount financed with
closing costs e) the monthly payment f) the total amount repaid g) the amount paid to interest.
Application Fee
Borrower's Credit check
Points
Appraisal Fee
Title Search
Title Insurance
Attorney Fee
Documentation stamp
Processing fee
$ 25
65
1.5% of Mortgage
350
215
450
400
0.30% of Mortgage
1.25% of Mortgage
National Collegiate Athletic Association (NCAA) statistics show
that for every 75,000 high school seniors playing basketball, about 2250 play
college basketball as first-year students. Write the ratio of the number of first-
year students playing college basketball to the number of high school seniors
playing basketball.
Answer: 100:3
Step-by-step explanation:
Answer:
the ratio of first-year college basketball players to high school seniors playing basketball is 3:100.
Step-by-step explanation:
The problem states that for every 75,000 high school seniors playing basketball, about 2,250 play college basketball as first-year students. To write the ratio of first-year college basketball players to high school seniors playing basketball, we need to compare the two quantities.
The ratio is a way of expressing the relationship between two numbers as a fraction or a pair of numbers separated by a colon (:). In this case, we want to express the ratio of the number of first-year college basketball players to the number of high school seniors playing basketball.
To write the ratio, we start by putting the number of first-year college basketball players (2,250) in the numerator of a fraction. We put the number of high school seniors playing basketball (75,000) in the denominator of the same fraction.
So the ratio can be expressed as:
2,250/75,000
To simplify this fraction, we can divide both the numerator and denominator by a common factor. In this case, both 2,250 and 75,000 are divisible by 750. Dividing both numbers by 750 gives:
2,250/75,000 = 3/100
Simplify.
Remove all perfect squares from inside the square root. Assume x is positive.
20x8 =
The simplified form of the given expression as required to be determined in the task content is; 2x⁴√5.
What is the simplified form of the given expression?It follows from the task content that the Simon form of the given expression √20x⁸ is required to be determined from the task content.
On this note, since the given expression is; √20x⁸.
We have that; = √ (4 × 5 × x⁸)
Therefore, since 4 and x⁸ are perfect squares; it follows that we have;
= 2x⁴ √5.
Ultimately, the simplified form of the given expression as required to be determined is; 2x⁴ √5.
Complete question; The correct expression is; √20x⁸.
Read more on perfect squares;
https://brainly.com/question/27307830
#SPJ1
Jason and Scott plan on biking to the center of town to get ice cream at the convenience store. Since Scott
had to put air in his tires, Jason was able to get 1 mile ahead of Scott before Scott left the house. Both
bikers rode at a speed of 15 miles per hour.
Write an equation in y = mx + b form that represents Jason's trip. Jason =
a.
Write an equation in y = mx + b form that represents Scott's trip.
Will Jason and Scott meet before they both reach the store? Explain.
If you were to graph both lines on the same coordinate plane, predict what your graph would look
like.
Answer:
a. Jason's equation in y = mx + b form is y = 15x + 1.
b. Scott's equation in y = mx + b form is y = 15x.
Since both are moving at the same speed, they will meet at the point where their distances from the starting point are the same. Let d be the distance from Scott's starting point to the store. Then, the distance from Jason's starting point to the store is d + 1. Using the formula distance = rate × time, we can set up an equation:
15t = d
15t - 1 = d + 1
Solving for t in both equations, we get t = d/15 and t = (d+2)/15, respectively. Equating these expressions for t, we get d/15 = (d+2)/15, which simplifies to d = -2. This means that they will not meet before reaching the store, as Jason is already 1 mile ahead of Scott and will stay ahead throughout the trip.
If we were to graph both lines on the same coordinate plane, we would have two parallel lines with a slope of 15, where Jason's line would intersect the y-axis at 1.
Please help me answer!
As a result, the percentage of adults who selected math is different from the percentage of kids who did.
what is percentage ?As a number out of 100, a percentage is a method to express a proportion or a fraction. It is symbolized by the number %. If there are 25 boys in a class of 100 pupils, for instance, then there are 25% of boys in the class. It is a helpful method to compare quantities and to express changes in values over time.
given
120 80
Total 200
Women Overall Party A Party B
70 60
Overall 130
Therefore, there are 130 ladies in the group.
b) The chart indicates that 70 women plan to support Party A.
Thus, the percentage of adults who selected English was 40% of 48, which is equal to 0.4 times 48 and 19.2 when rounded to the closest whole number.
b) Reeshma is not accurate. The percentage of adults who selected math is 35%, while for children it is 40%, according to the pie chart.
To know more about percentage visit:
https://brainly.com/question/28269290
#SPJ1
The complete question is:- complete the two-way table, which shows the voting intentions of a group of men and women. a How many women are in the group?
Men
Party A Party B 120
Total 200
Women 130
Total 380
b How many women intend to vote for Party A?
2 A group of 48 adults are asked what their favourite subject was at school. They can choose from
maths, English and science.
A group of 32 school children are asked the
same question.
Name the shape that will result from connecting the points (-4, 1) , (-4, -4) , (0, 3) , and (0, 6) .
A: Square
B: Rectangle
C: Trapezoid
D: Parallelogram
The shape that results from connecting the points (-4, 1), (-4, -4), (0, 3), and (0, 6) is a trapezoid.
What is a trapezoid?A trapezoid is a geometric form that has four sides, two of which are parallel and two of which are nonparallel (or skew lines). A trapezoid is also known as a trapezium (UK) or a trapeze (US).
The trapezoid's parallel sides are known as the bases, and the two nonparallel sides are known as the legs or lateral sides. The trapezoid is also sometimes referred to as the irregular quadrilateral.
How to identify a trapezoid?A quadrilateral is a shape that has four sides, four vertices, and four angles. The following are the characteristics of a trapezoid:
It has four sidesIt has two parallel sides and two nonparallel sidesIt has two opposite sides that are parallel to one another and two other sides that are not parallelIt has two acute angles and two obtuse anglesIt has diagonals that intersect at a midpointThe formula for the area of a trapezoid is as follows:
Area of a trapezoid = [ (base 1 + base 2) / 2 ] x height
To know more about the "trapezoid": https://brainly.com/question/1463152
#SPJ11
