Answer: The melting point would be lower and the boiling point would be higher
Explanation: From Beryllium to Barium the melting point and the boiling point were constantly decreasing. after that, Radium's boiling point starts to increase in temperature. So I would assume that if there was an element in group 2 with a higher atomic number than Radium it's melting point would continue decreasing while the boiling point increased.
When, we discovered a Group 2 element having an atomic number larger than radium (Ra). Then, we expect that the melting and boiling points of Group 2 elements generally decrease as you move down the group. This is because the outermost electrons are farther from the nucleus due to the increased number of electron shells.
Group 2 elements are alkaline earth metals, and they exhibit certain trends in their physical properties as you move down the group in the periodic table. Radium (Ra) is the last naturally occurring element in Group 2. If we discover a hypothetical Group 2 element with an atomic number larger than radium, it would likely be an artificially synthesized element, and its properties would be subject to speculation.
As we move down Group 2, the atomic number increases, and the elements have more electron shells. This leads to several trends:
Melting and Boiling Points:
The melting and boiling points of Group 2 elements generally decrease as you move down the group. This is because the outermost electrons are farther from the nucleus due to the increased number of electron shells. As a result, the metallic bonds that hold the atoms together weaken, making it easier to break the lattice structure and transition from solid to liquid or gas.
If the hypothetical Group 2 element has an atomic number larger than radium, it would likely have more electron shells and thus a lower melting and boiling point compared to radium. This trend follows the pattern observed in other Group 2 elements.
Density:
Group 2 elements also tend to become less dense as you move down the group. This is because the increase in electron shells leads to larger atomic sizes, and the increased atomic volume decreases the packing efficiency in the solid state.
A Group 2 element with an atomic number larger than radium would likely have a lower density than radium, following the trend observed in the rest of the group.
Reactivity:
Group 2 elements become more reactive as you move down the group. This is because the outermost electrons are farther from the nucleus and are more easily lost, leading to more vigorous chemical reactions, especially with water and oxygen.
The hypothetical Group 2 element might exhibit increased reactivity compared to radium and other elements in the group.
To know more about radium here
https://brainly.com/question/33709400
#SPJ3
I need help with this
Answer:
129 units cubed
Explanation:
There are ten spaces between 120 and 130, so we can infer that each line represents a change in volume of 1 unit. The volume of the substance in the graduated cylinder looks like it's 1 under 130, so its volume is 129 units.
Hopefully this was helpful! :)
What is acid rainnnnnn
Answer:
ACID RAIN
Explanation:
duh
A chemist measured the temperature of a liquid to be 26 ∘C, then she heated the liquid to 83 ∘C. By how many Kelvins did the temperature change.
Answer: 57.C
Explanation: simple subtraction
how is a standard hydrogen atom different from a hydrogen ion?
Answer:
a hydrogen ion will have more or fewer electrons than a standard hydrogen atom.
Explanation:
ions are atoms that have lost or gained elections. this applies to ions in general.
65,000(0.08 x 200x 0.004) / (800x300)
Perform the following operations giving the proper number as a benefit get figures in the answer.
Help
Answer:
Use calculator but first group them one by one and open the bracket by solving them accordingly
The number we get by this operation is 0.016. This number can be taken based on the rules for significant figures.
What is significant figures?The number of significant figures is the number of digits that are known with certainty plus the last one having some uncertainty. All non zero values are significant and zero preceding first non zero digit is not significant .
For example in 65000, there are only two significant figures. Similarly in 0.08 only one significant digit is present. Now when we multiply two decimal numbers, the result can only have as many decimal places as there are in the value with fewest decimal places.
First, multiply the numbers inside the bracket. As per the above rule, the result should contain only two decimal places.
(0.08 ×200×0.004) = 0.06
Multiply by 65000 - 0.06×65000 = 3900
Now divide it by the multiplication product (800× 300), 240000 we get as follows:
3900÷240000 = 0.016
Hence the result of this operation is 0.016.
To learn more about significant figures, refer the link below:
https://brainly.com/question/17396594
#SPJ2
the properties of a substance that can be observed without altering its identify physical property. true false ?
Answer:
True
Explanation:
A physical property is a characteristic of a substance that can be observed or measured without changing the identity of the substance. Physical properties include color, density, hardness, and melting and boiling points.
a student is given a mixture of sand and salt. describe a method the student could use to separate the mixture.
There is a golden role of solubility, polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. Therefore, Salt and sand can be separated by dissolving the salt in water, filtering the mixture, and then evaporating the water to recover the salt.
What is solution?Solutions are a homogeneous mixture of two or more substances. A solution is a homogeneous mixture of solvent and solute molecules. Solvent is a substance that is in large amount in solution.
Solute is the substance which is in small amount in a solution. Salt and sand can be separated by dissolving the salt in water, filtering the mixture, and then evaporating the water to recover the salt.
Therefore, Salt and sand can be separated by dissolving the salt in water, filtering the mixture, and then evaporating the water to recover the salt.
To know more about solution, here:
https://brainly.com/question/13812915
#SPJ2
PLEASEEE ANSWER PLEASEEE PLEASE I’ll mark brainliest
Answer:
Lithium has 1 valence electron, Sulfur has 6
A is oxidized, B is reduced
A is reducing agent, B is oxidizing agent
Explanation:
when an atom loses electrons, it is oxidized
when an atom gains electrons, it is reduced (almost think of when you add a negative number to a positive number, the positive number gets smaller or is reduced)
The temperature of a gas is increased. Which statement best explains the effect that this has on the motion of gas
particles?
Answer:
The average kinetic energy increases, and the particles collide more frequently.
Explanation:
SnO is a different compound than SnO2. What is the difference regarding the cation?
Answer:
Sn has a different charge in each of the compounds.
+2, +4 charges, respectively.
Explanation:
SnO has subscripts of 1, which means it takes only one of each element to make the compound.
We know that oxygen's charge is -2 from the periodic table.
In order for the compound to be neutrally charged,
Sn + O = 0
Sn - 2 = 0.
So, Sn has a +2 charge.
Likewise with the second compound, we know O has a -2 charge.
Sn + 2*(-2) = 0
Sn - 4 = 0
Sn = +4
+2 and +4 are different charges on the Sn cation.
assuming that no heat is lost to the surroundings, what is the final temperature of the mixture?
What fraction of the original atoms of the radioactive sample will remain after the given number of half-lives has passed?
Answer:
1/8
Explanation:
[tex] \frac{1}{ {2}^{3} } = \frac{1}{8} [/tex]
Mark brainliest please
covalent bond of N and S
Answer:
Covalent bond between identical atoms
Covalent bonds occur between identical atoms or between different atoms whose difference in electronegativity is insufficient to allow transfer of electrons to form ions. ... The two hydrogen atoms are attracted to the same pair of electrons in the covalent bond.
What is the total number of neutrons in an atom of O-18? a) 18 b) 16 c) 10 d) 8
Answer:
There are 10 neutrons
Explanation:
Because the atomic number is 8 and the isotope number is 18 (which is the collective protons and neutrons), we can do
18-8=10
Answer:
10
Explanation:
8 proton because it is oxygen
10 neutron because 18-8
what is the wavelength of radio waves that have a frequency of 3.20 x 1010 hz?
Answer:9.38 x 10^−3 m
Explanation:
Answer: 9.38 x 10^−3 m
Explanation:
what are the statement of ethanol
Answer:
Density 0.78945 g/cm3 (at 20 °C)
Melting point −114.14 ± 0.03 °C (−173.45 ± 0.05 °F; 159.01 ± 0.03 K)
Boiling point 78.23 ± 0.09 °C (172.81 ± 0.16 °F; 351.38 ± 0.09 K)
Solubility in water Miscible
Explanation:
mark brainliest
mmmmmmmmmmmmmtyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
Answer:
Yes.
Explanation:
Answer:
=0=0==00=0=0=
Explanation:
can i have Brainliest i need 1 more
whats valency of nitrogen in N2O3, N2O5 and NO
Answer:
Valency of nitrogen in the given compounds:
N₂O₃ = +3
N₂O₅ = +5
NO = +2
-TheUnknownScientist 72
Why is knowledge of the activity series crucial in choosing which metal to build things with?
Answer:
activity series is a list of substances ranked in order of relative reactivity.
For example, magnesium metal can displace hydrogen ions from solution. So magnesium is more reactive than hydrogen:
Mg(s) + 2H⁺(aq) → H₂(g) + Mg²⁺(aq)
Zinc metal can also displace hydrogen ions from solution:
Zn(s) + 2H⁺(aq) → H₂(g) + Zn²⁺(aq)
so zinc is also more active than hydrogen.
But magnesium metal can displace zinc ions from solution:
Mg(s) + Zn²⁺(aq) → Zn(s) + Mg²⁺(aq)
so magnesium is more active than zinc.
The activity series including these elements would be Mg > Zn > H.
Chemists have built up a complete activity series in a similar way.
The most active metals are at the top of the table; the least active are at the bottom.
Any metal that is higher in the series will displace a metal that is below it in a
The knowledge of the activity series in choosing which metal to build things with because; it provides a basis for determining which metal ion is able to displace the other upon chemical interaction.
The choice of building material is a very important design consideration.
This is so because careful consideration must be taken while deciding which metal to build things with as the reactivity of metals vary.This variation is carefully quantified by the position of metals on the activity series.
Read more;
https://brainly.com/question/17597543
could you help answer these two question
Answer:
number 29 is D
Explanation: When the moon orbits the earth some of the light reflects off the moon, making it visible on the Earth.
I dont know how to answer 28 fully, is there a picture?
A student draws a model of one of the sun's layers. The student draws arrows to represent hot gas moving away from the center of the sun and other arrows to represent cool gas moving toward the center of the sun. Which layer does the model show?
Radiation Zone
Convection Zone
Chromosphere
Inner Core
Answer:
The convection zone :)
Explain why the invention of the microscope led to the discovery of cells.
Answer:
Because people can now see microscopic items
Explanation:
People can now see the cells because they are so small we cant see them with the enhanced microscope we can see everything that's micro
A GIRL WAIKS 10M NORTH,15M EAST AND THEN FINALLY 20MSOUTH FIND HER DISPLACEMENT
Answer:
see this
Explanation:
What is the most common injury caused by working with machines unsafely?
Answer:
The most common injury caused by working with machinery are cuts and burns.
Explanation:
Cuts and burns are the most common injury caused by working with machines unsafely.
What is injury?Any physiological harm to living tissue brought on by acute physical stress is referred to as an injury. An injury can be brought on by a blunt trauma, a piercing trauma, burning, exposure to chemicals, asphyxiation, or overexertion, and it can also happen accidentally. Any area of the body can become injured, and each injury has a unique set of symptoms.
Major injuries are normally treated by a medical practitioner, and the type of treatment depends considerably on the injury. The most frequent reason for accidental human injury or injury-related death is traffic crashes. Chronic conditions are different from injuries. Cuts and burns are the most common injury caused by working with machines unsafely.
Therefore, Cuts and burns are the most common injury caused by working with machines unsafely.
To know more about injury, here:
https://brainly.com/question/445007
#SPJ2
Ethanoic acid is a weak acid because
Is a carboxylic acid
Does not irritate the skin
Is not completely ionized in water
Produces one hydrogen ion per molecule
Answer:
is not completely ionized in water
The ethanoic acid (acetic acid) is considered as a weak acid because it does not releases all of its hydrogen in water, rather it dissociates partially and establishes an equilibrium with its conjugate base.
Where is a alcohol thermometer used?
Explanation:
Ethanol-filled thermometers are used in preference to mercury for meteorological measurements of minimum temperatures and can be used down to −70 °C (−94 °F). The physical limitation of the ability of a thermometer to measure low temperature is the freezing point of the liquid used.
rays with short wavelengths that are the least penetrating, produce chemical effects, and kill germs are
Answer:ultraviolet rays
Explanation:
What makes inertia important in that activity?
What is an activation energy
Answer:
Defination of Activation energy :- In chemistry and physics, activation energy is the minimum amount of energy that must be provided for compounds to result in a chemical reaction. The activation energy of a reaction is measured in joules per mole, kilojoules per mole or kilocalories per mole. Meaning of Activation energy :- The minimum quantity of energy which the reacting species must possess in order to undergo a specified reaction.Explanation:
Hope this helps you dear ✌️Carry on learning !!Where does the energy of a hurricane come from? (1 point)
O the Sun
O strong winds
O Earth's spin
O Earth's moon
Answer:
strong winds come from the energy of a hurricane
The energy of a hurricane come from strong wind. The Taino Native American term hurricane, which translates to "bad spirit of the wind," is where the word hurricane originates.
What is hurricane ?A tropical storm that has sustained winds of 74 mph or greater is referred regarded as a hurricane. A storm's eye typically measures 20 to 30 miles in width and can reach distances of 400 miles. Storms can be dangerous because of their torrential downpours, strong gusts, and storm surges.
When warm, humid air begins to rise over water, hurricanes emerge. Cooler air replaces the rising air. Large clouds and thunderstorms continue to grow as a result of this process. Thanks to the earth's Coriolis Effect, these thunderstorms are still expanding and starting to rotate.
Thus, option B is correct.
To learn more about hurricane refer the link below;
https://brainly.com/question/13661501
#SPJ2
