technologies like bar code scanners, rfid tags and touch screens are used by businesses in which information processing step?

Information that enters your system could never be retrieved without a proper backup system in place.

Backup refers to creating copies of Information in case an original is lost or damaged. Backups can be used to restore data after a loss. Backup systems are one of the most important tools a company can have to protect its critical data.

The primary purpose of backup is to protect data that can be lost in the event of a catastrophic system failure or other data loss event. The secondary purpose is to recover data from an earlier time period if a backup is available. A backup system can provide significant cost savings to a business in terms of data loss prevention and recovery costs.

To know more about backup system:https://brainly.com/question/17355457

#SPJ11

An IPv6 address of ::1 is a loopback address.

IPv6 is the Internet Protocol version 6, a new version of IP that is based on IPv4. IPv6 addresses are 128 bits in length, and they are written in a hexadecimal form separated by colons.IPv6 addresses come in three forms: Unicast, Multicast, and Anycast.

A loopback address is a unique IP address that is utilized to check network software without having to use the network. As a result, no physical device is required to use it. A loopback address is also known as a virtual IP address.::1 is the loopback address in IPv6, which is similar to 127.0.0.1 in IPv4.

To know more about IPV6 Address of ::1; https://brainly.com/question/31103106

#SPJ11

The average turnaround time for all processes is 8.17.

Learn more about  CPU here: https://brainly.com/question/474553

#SPJ11

The bus transmits a memory address when primary storage is the sending or receiving device.

Bus in Computer Science- A bus is a collection of wires used to transmit data from one component to another on a motherboard or other electronic circuit board. In modern computer systems, buses have become a significant component.

The primary purpose of a bus is to enable the computer's different components to communicate with one another. Each bus in a computer has a fixed number of wires dedicated to transmitting data to specific parts of the computer. These buses' capacity and design are determined by the type of computer being built and the components being used. A computer may have a number of buses, each performing a specific function.

The transmission of memory addresses when primary storage is the sending or receiving device is made possible by a bus. To put it another way, the bus makes it possible for the computer's central processing unit (CPU) and random access memory (RAM) to communicate efficiently. When the CPU is looking for information, it sends a request to RAM, and the address of the data is transmitted over the bus. Then, once the requested data is found, it is sent back over the bus to the CPU, which can now use it to execute the instructions required for the computer to complete a given task.

To learn more about "primary storage", visit: https://brainly.com/question/31140161

#SPJ11

During the EVALUATE ADDRESS step of an LC-3 LDR instruction, the MAR register is changed. Therefore, the correct option is E. MAR.

The rest of the options are discussed below:

a. PC: The Program Counter (PC) register, which keeps track of the address of the current instruction, is not changed in the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

b. NONE: Since MAR is changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction, this answer is incorrect.

c. MDR: Memory Data Register (MDR) is not modified during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

d. DST register: The DST register is not modified during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

e. MAR: The Memory Address Register (MAR) is changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is correct.

f. IR: Instruction Register (IR) is not changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.

You can learn more about MAR register at: brainly.com/question/15892454

#SPJ11

If Mr. Lowe chooses to purchase a switch that only accommodates the organization's current need for two fiber-optic connections, he could have to replace the switch when the network is expanded.

Physical topology: This type of network topology describes how computer wires and other network devices are laid out.

A client/server protocol called Dynamic Host Configuration Protocol (DHCP) automatically assigns an Internet Protocol (IP) host with an IP address and other configuration data like the subnet mask.

To know more about network visit:-

https://brainly.com/question/14276789

#SPJ1

To apply security settings to the registry on a Windows server, the command that you should use is C: "regedit".

"Regedit" is a built-in Windows utility that allows you to view, edit, and modify the registry. The registry is a database that stores important settings and configurations for the Windows operating system and installed applications.

With regedit, you can apply security settings to the registry by modifying the permissions for registry keys and values. By setting permissions, you can control which users and groups can access and modify specific parts of the registry. This helps to protect the registry from unauthorized access or modification, which can cause system instability or security issues.

Thus, option C is the correct answer.

You can learn more about regedit at

https://brainly.com/question/14969685

#SPJ11

Textlinks are the name given to the specifically coded components in a website that allow you to navigate from one web page to another within the same website or to another. The idea that hashtag activism promotes a fictitious sense of involvement is criticized. An alternative to searching specific web pages is a metasearch engine.

To learn more about web page, refer to:

https://brainly.com/question/28431103

As an administrator for the Westsim domain, the Organizational Units (OUs) have been created for each company department. All user and computer accounts for each department have been moved into their respective department OUs.

An Organizational Unit (OU) is a container object within an Active Directory that can contain other objects, including other OUs. OUs are created to facilitate the administration of users, computers, and other directory objects. An OU can have policies and permissions applied to it that are distinct from those of other OUs. These containers organize objects within the AD, making it simpler to implement administrative assignments and deploy Group Policy Objects (GPOs). What is Active Directory (AD)?Active Directory (AD) is a directory service that is utilized in Windows environments to centrally manage authentication and authorization for users, computers, and other network resources. It works by combining information about user accounts, computer accounts, and other resources into a central database.

Learn more about Organizational Units (OUs): https://brainly.com/question/13440440

#SPJ11

The given statement "Derek wants to remove columns from Query he doesn't need. To do so, he can select the columns he wants to remove with Ctrl+Click. Then he can select Remove Columns > Remove Columns in the Query Editor ribbon" is True.

In Microsoft Office Access, the ribbon is the strip of tabs and icons that sits above the work area. It contains the fundamental commands for working with a database. The Ribbon is a context-sensitive tool that displays the commands that are relevant to the task being performed, such as table design or form creation.

The Query Editor Ribbon, located at the top of the Microsoft Power Query editor window, provides quick access to various commonly used commands. To remove columns from Query in Microsoft Power Query Editor, you can select the columns you want to remove with Ctrl+Click.

Then, in the Query Editor Ribbon, you can select Remove Columns > Remove Columns. The selected columns will be removed from the Query.

You can learn more about Query Editor at: brainly.com/question/30154538

#SPJ11

The data envelopment analysis would enable Fabmark Consulting to combine and analyze this information.

To learn more about data envelopment analysis, refer to:

https://brainly.com/question/29981485

The recursive version of the function decimal which takes in an integer n and returns a list of its digits, the decimal representation of n can be written as follows:
def decimal(n):
 if n == 0:
   return [0]
 elif n < 0:
   return ['-'] + decimal(-n)
 else:
   return decimal(n // 10) + [n % 10]

-This recursive function takes an integer n as an input and returns a list of its digits, the decimal representation of n.

-If n is equal to 0, the function returns a list containing 0 as the element.

-If n is less than 0, the function returns a list containing a negative sign followed by the result of a recursive call to the function for -n.

-Otherwise, the function returns a list that is a result of a recursive call to the function for n // 10 followed by the remainder of n % 10.

Learn more about recursive function here: https://brainly.com/question/489759

#SPJ11

When the green flag is clicked, Scratch Cat will say "Green!"

The sequence of blocks tells us that when the green flag is clicked, the Scratch Cat sprite will move 10 steps to the right, which puts it next to the green ball sprite. This will trigger the "Say Green!" block, so Scratch Cat will say "Green!" and not the "Say Red!" block. Scratch Cat is the main character and titular protagonist of Scratch: Story Mode and its remake. He is an orange anthropomorphic cat who resides in Scratch city and lives with his best friends Giga and Gobo, with the latter being his pet.

To know more about Scratch:https://brainly.com/question/14468563

#SPJ11

The appropriate spreadsheet function that calculates the present value of an ordinary annuity of $100 per year for 10 years at 10% per year is PV(0.10,10,-100,0,0). The correct answer is a.

where: rate = the interest rate per period

nper = the total number of payment periods in an annuity

pmt = the payment made in each period (in this case, $100 per year)

fv = the future value of the annuity (in this case, $0 since it is an ordinary annuity)

type = the type of annuity (in this case, $0 since it is an ordinary annuity)

Learn more about  spreadsheet  here: https://brainly.com/question/26919847

#SPJ11

Your passwords should be created using an algorithm that produces ones that combine letters, numbers, and symbols.

Experts advise using salt and a powerful, slow hashing algorithm like Argon2 or Bcrypt to secure passwords (or even better, with salt and pepper). (In essence, for this usage, avoid quicker algorithms.) to validate certificate and file signatures.

All passwords should contain a mix of capital and lowercase letters, digits, and special characters . Avoid using names of individuals, pets, or words from the dictionary. It's also recommended to stay away from utilising important dates (birthdays, anniversaries, etc.).

To know more about algorithm visit:-

https://brainly.com/question/24452703

#SPJ1

The wiring connectors that a technician should use when terminating the cable are RJ-45.

The RJ-45 is a type of connector commonly used in Ethernet networking applications. The connectors are also used for other purposes such as telecommunications, video, and audio transmissions. The RJ-45 connector is an eight-pin connector that is used for connecting twisted-pair cable.A connector is a device that is used to connect cables to other cables or devices. There are many different types of connectors that are used in the industry, each with its own specific function. Some connectors are used for power, some for data, and others for audio and video.

An RJ-45 connector is a type of connector that is used for Ethernet networking applications. It is an eight-pin connector that is used for connecting twisted-pair cable. The connector has a locking tab that prevents the cable from being pulled out accidentally. RJ-45 connectors are used for a variety of applications such as telecommunications, video, and audio transmissions.

Learn more about RJ-45: https://brainly.com/question/30457663

#SPJ11

To write a C++ program that prompts the user to enter a positive whole number and prints an upside-down isosceles triangle that has 2n+1 columns and n rows, with - on the n+1 column and o on the rest of the triangle, we can use the following code:

#include <iostream>

using namespace std;

int main()

{

   int n;

   // Ask user to enter a positive whole number

   cout << "Enter a positive number: ";

   cin >> n;

   // If the number is odd, print the upside-down isosceles triangle

   if (n % 2 != 0) {

       // Print nxn upside-down triangle before -

       for (int i = 0; i < n; i++) {

           for (int j = 0; j < n-i; j++) {

               cout << "o";

           }

           cout << endl;

       }

       // Print -

       cout << "-";

       // Print symmetric upside-down triangle after -

      for (int i = 0; i < n; i++) {

           for (int j = 0; j <= i; j++) {

               cout << "o";

           }

           cout << endl;

       }

   }

   return 0;

}

In this program, we first ask the user to enter a positive whole number and store it in the variable n. Then, we check if the number is odd. If the number is odd, we use two nested for loops to print the upside-down isosceles triangle: the first loop prints the upside-down triangle before -, while the second loop prints the symmetric upside-down triangle after -.

For example, if the user enters 5, the program will print the following triangle:

ooooo-

oooo-o

ooo-oo

oo-ooo

o-oooo

Learn more about programming: https://brainly.com/question/26134656

#SPJ11

Unlocking BitLocker without a password and recovery key can be challenging as BitLocker is designed to provide robust data protection. However, there are some methods you can try:

Check if the password is saved in the Microsoft account. If the password is saved, then you can use the Microsoft Account to unlock the drive.

Use a data recovery agent (DRA). If the BitLocker drive is part of an Active Directory domain, the domain administrator can use a DRA to unlock the drive.

Try using a BitLocker data recovery tool. Some third-party tools can unlock BitLocker-encrypted drives.

Try brute-forcing the password. This is not recommended as it is time-consuming and can damage the drive.

It's essential to remember that unlocking BitLocker without a password and recovery key is not a simple task, and there is always a risk of data loss or damage. Therefore, it's always recommended to keep a backup of the recovery key in a secure location.

To know more about recovery click here:

brainly.com/question/1528638

#SPJ4

"Rich feature hierarchies for accurate object detection and semantic segmentation" is a research paper published in 2014 by Ross Girshick, Jeff Donahue, Trevor Darrell, and Jitendra Malik.

The paper presents a deep learning architecture called the Region-based Convolutional Neural Network (R-CNN) for accurate object detection and semantic segmentation. R-CNN uses a combination of selective search, convolutional neural networks (CNN), and support vector machines (SVM) to identify objects in an image and classify them into different categories. The paper showed that R-CNN outperformed previous methods for object detection and semantic segmentation on several benchmark datasets, demonstrating the effectiveness of using rich feature hierarchies for these tasks.

To know more about semantic click here:

brainly.com/question/30261266

#SPJ4

The PROC SGPUT procedure is used to print out a dataset.

The PROC step that prints a dataset out is proc print. The PRINT procedure prints the content of a SAS dataset. It can generate a listing of the entire data set or specific observations and/or variables. In addition, it can apply formatting to numeric and character values. Printing a summary report, counting observations, and exporting the data set are some of the additional features that this procedure provides. In the SAS output window, PROC PRINT generates a report by default. Each variable in the input data set is printed in a column by default.

SAS writes variable names in the first row of the report, with each observation of the input data set in a new line. A period is shown for a missing value. The reporting of the PROC PRINT is very much customizable.  PROC PRINT features a vast array of optional arguments that allow the report to be customized to meet specific project requirements. Some of the optional features include selecting observations and variables, formatting variables, writing report titles and footnotes, and applying conditional statements.

To learn more about Proc from here:

https://brainly.com/question/30791635

#SPJ11

A "trojan" or "trojan horse" is a type of malware that masquerades as a helpful software or file but is actually dangerous.

A "trojan" or "trojan horse" is a type of malware that masquerades as a helpful software or file but is actually dangerous. A trojan is a form of malware that tries to deceive people into installing it by seeming to be a trustworthy programme or file. Once activated, the trojan can carry out a variety of destructive tasks, including stealing confidential data, corrupting files, and granting remote access to the attacker. Trojans can be challenging to find and delete, and they can be distributed by email attachments, malicious downloads, or other methods. Use of antivirus and anti-malware software is necessary to protect against trojans, as is vigilance while downloading or installing software.

Learn more about  malware here:

https://brainly.com/question/22185332

#SPJ4

If Iwina's media streaming device supports a transmission speed of up to 200 Mbps, I would recommend a wireless router that supports at least 802.11n wireless standard.

802.11n is a wireless networking standard that operates on both the 2.4 GHz and 5 GHz frequency bands. It offers higher speeds and greater range compared to earlier wireless standards, and is commonly used in home and small business networks.

Thus, if Iwina's media streaming device supports a transmission speed of up to 200 Mbps, I would recommend a wireless router that supports at least 802.11n wireless standard. This wireless standard supports a theoretical maximum speed of up to 600 Mbps, which should provide enough bandwidth to support Iwina's device. Alternatively, a router that supports the newer 802.11ac wireless standard could also be considered, as it offers even higher theoretical speeds.

Learn more about wireless router on:

https://brainly.com/question/30079964

#SPJ1

The sequence used by the attacker, in the Directory Traversal Attacks to access restricted directories outside of the web server root directory is ../.

Directory Traversal Attack is a vulnerability that happens when an attacker can break out of a web application's root directory and access sensitive files on a web server. A hacker can use directory traversal to view files, execute code, and access sensitive data. Directory traversal attacks can be launched using various methods, including web servers, FTP clients, and even SSH terminals.

Directory traversal is a type of web exploit that can be used to read sensitive data, execute code, or even gain administrative access to a web server. It's a method of exploiting web servers that occurs when an attacker sends unexpected input to the server, causing it to display the contents of a directory that isn't meant to be visible.

Learn more about  Directory Traversal Attack:https://brainly.com/question/28207101

#SPJ11

The syntax to define a generic class with multiple bounded parameters is `public class MyClass {...}`

Generics were first introduced in the Java SE 5 release as a way to handle type-safe objects. A generic class in Java is a class that can handle a collection of objects of different types. Generics provide a way to define type-specific classes, and Java supports it fully. It is an essential feature of Java programming that allows developers to write robust, reusable, and type-safe code.

To define a generic class with multiple bounded parameters, we can use the syntax shown below:

public class MyClass {...}`

In the above syntax, `Type1` and `Type2` are generic parameters that can take values of any type that extends the specified bound type, `Bound1` and `Bound2`, respectively.

The correct syntax to define a generic class with multiple bounded parameters is given below.

`public class MyClass {...}`

Therefore, option D is the correct answer.

To know more about "syntax", visit: https://brainly.com/question/31143468

#SPJ11

To prevent users in your domain from running a common game on their machines, you can use AppLocker to create a rule that blocks the game's executable file from running.

Since the application does not have a digital signature, you can create a path rule that specifies the location of the executable file. To ensure that the rule applies even if the file is moved or renamed, you should use a publisher condition with a hash rule.

A publisher condition with a hash rule checks the digital signature of an executable file to ensure that it has not been tampered with or modified. Since the game does not have a digital signature, the hash rule will generate a unique identifier based on the file's content, and this identifier will be used to enforce the rule. By combining the publisher condition with the hash rule, you can prevent the game from running even if the file is moved or renamed to a different location.

You can learn more about executable file at

https://brainly.com/question/13166283

#SPJ11

The best location to install an omnidirectional antenna that is connected to a wireless access point is in a spot that is relatively high up, away from obstructions such as large trees or buildings. It should be placed as close to the center of the wireless access point's coverage area as possible to maximize signal strength.

The higher the wireless access point, the more coverage it can provide. This would enable a stronger signal and a wider coverage area. Hence, the most optimal place for an omnidirectional antenna would be on the rooftop or as close to the ceiling as possible.

By installing the antenna higher, the signal of the wireless access point would be less obstructed by barriers such as walls, furniture, and other electronic devices. This would enable the signal to travel further and reach more devices.

Therefore, it is crucial to choose a location for the omnidirectional antenna that provides the best coverage possible. The best place for an omnidirectional antenna is in a central location that can reach all the devices that need to be connected.

Learn more about wireless access point here:

https://brainly.com/question/27334545

#SPJ11

The second essential element for diversion programs, as suggested by Steadman and Associates, is swift and certain sanctions. Swift sanctions refer to prompt and consistent consequences for violating rules, and certain sanctions refer to predictable outcomes for any violation.

According to Steadman and Associates, there are two essential elements necessary for diversion programs. One is an aggressive linkage to an array of community services and the other is a continuous relationship between the offender and the community services provided. An array of community services is crucial for diversion programs, but the aggressive linkage to these services is critical for their effectiveness.

Furthermore, the goal of diversion programs is to prevent people from getting further involved in the criminal justice system diversion programs redirect people from criminal justice involvement to social service participation in hopes of preventing future crime.

Steadman and Associates' belief that aggressive linkage to an array of community services is one of the two essential elements necessary for diversion programs is correct. A continuous relationship between the offender and the community services provided is the other essential element.

To learn more about the criminal justice system click here:

https://brainly.com/question/7207817

#SPJ11

Jiro is working on a research project. His topic is a programming language that was designed to teach programming and was very popular in the 1980s and 1990s. The most likely programming language that Jiro is researching is Pascal.

What is Pascal?

Pascal is a computer programming language that is named after Blaise Pascal, a French mathematician, physicist, and philosopher. It is an imperative, procedural programming language that was created in 1970 by Niklaus Wirth. Pascal was designed to encourage good programming practices using structured programming and data structuring. Pascal was initially designed to teach programming, and it quickly became a popular programming language because of its simplicity and ease of use.

Pascal was also widely used for scientific research, engineering, and business applications. Pascal was developed to improve on the shortcomings of the earlier programming languages like FORTRAN and COBOL. It was developed with a focus on simplicity and readability. Pascal features, including data structuring, data types, and syntax, allowed the creation of reusable and scalable software.

Why is Pascal important?

Pascal is important because it was one of the first programming languages that used procedural programming, which means that programs are divided into reusable and smaller subroutines. It is still used today, although it has been largely replaced by other programming languages, like C++. Pascal's impact can still be seen in modern programming languages, including Java, Python, and C++. Pascal has influenced many languages in a variety of ways. The significance of Pascal can be traced to its impact on the future of programming languages.

Learn more about Pascal here:

https://brainly.com/question/27918473

#SPJ11

A fort's drawbacks include limiting your range of motion and making it difficult to organize a sizable force inside the fort prior to a combat. Forts are useful stopovers for lodging troops traveling a long distance outside of conflict.

A fort is a fortified military structure designed to protect a specific location or area from external threats. Forts can vary in size and shape, and can be constructed using a variety of materials and techniques. Some forts are built to withstand attacks from land or sea, while others are designed to protect natural resources such as water sources or transportation routes. Historically, forts have been used by armies and other military forces as defensive positions during battles and wars. Today, many forts have been repurposed as historical landmarks, museums, or tourist attractions.

Learn more about routes here brainly.com/question/18850324

#SPJ4

The best solution for a computer support technician who is assigned to decide the best IEEE 802.11 WLAN solution for a small office installation is-

A. install an IEEE 802.11n/ac MIMO WLAN, disable ERP protection, and set the access point to channel 11.

IEEE- IEEE refers to the Institute of Electrical and Electronics Engineers, which is an organization that promotes technological innovations and excellence throughout the world. IEEE has set up numerous technological standards to enhance device performance and compatibility. IEEE 802.11 refers to a wireless networking standard, commonly known as Wi-Fi. WLAN stands for Wireless Local Area Network.

Problem in this case- Another business is utilizing an IEEE 802.11b WLAN operating on channels 1 and 6. The customer wants maximum throughput and does not need backward compatibility to IEEE 802.11b. Therefore, the channel numbers 1 and 6 are already occupied. This implies that channel 11 should be used instead.

ERP protection should be disabled to enhance the data transfer rate. The ERP protection may impact the transmission rates of an IEEE 802.11n WLAN, and the customer wants to achieve the maximum throughput. As a result, this option is selected. Hence, it can be concluded that the best solution for this installation is to install an IEEE 802.11n/ac MIMO WLAN, disable ERP protection, and set the access point to channel 11.

Therefore option A is the correct answer.

"IEEE", https://brainly.com/question/31143015

#SPJ11