The answer is 50 i.e. C

Answer:

you have patience the distance.

Explanation:

the train leaves at 6.30.

Explanation:

formula: Vi = Vf - (at)

Vi: intial velocity

Vf: final velocity

a: acceleration

t: time

fill in formula with the numbers you are given

Vi= 41.6m - ((9.81 m/s^2)(1.89s))

parenthesis first according to pemdas

Vi= 41.6m - 18.54m/s

Answer: 23.06m/s

disclaimer: I havent done physics in awhile so I have no idea if this is right. just an attempt to help steer you in the right direction hopefully. good luck

Friction is a force that opposes the relative motion of two surfaces in contact. It exists when the surfaces of two bodies are in contact.The answers to the given questions are:

1. See attachment to this answer

2. a = 3.63 m/[tex]s^{2}[/tex]

3. μ = 0.36

Friction is an oppositional force between the surfaces of two bodies in contact, and tries to limit the motion of one body over the other. It is dependent on the nature of the surfaces in contact.

From the given question;

1. The free body diagram for this question is herewith attached to this answer.

Given that: [tex]F_{1}[/tex] = 50 N, [tex]F_{2}[/tex] = 15 N, [tex]F_{3}[/tex] = 6 N, and m = 8 kg.

2. The acceleration of the body can be determined by:

F = ma

where F is the total force acting on the body, m is the mass of the body and a is its acceleration.

So that;

a = [tex]\frac{F}{m}[/tex]

The total force on the body is;

F = [tex]F_{1}[/tex] - ([tex]F_{2}[/tex] + [tex]F_{3}[/tex])

  = 50 - (15 + 6)

  = 50 - 21

F = 29 N

Then;

a = [tex]\frac{29}{8}[/tex]

  = 3.625

a = 3.63 m/[tex]s^{2}[/tex]

The acceleration of the body is 3.63 m/[tex]s^{2}[/tex].

3. The coefficient of limiting friction (μ) between the surfaces is:

μ = [tex]\frac{Force}{Reaction}[/tex]

Force = 29 N

Reaction = mg

               = 8 x 10

               = 80 N

μ = [tex]\frac{29}{80}[/tex]

   = 0.3625

μ = 0.36

Visit: https://brainly.com/question/18493311

Answer:

Friction is a force that opposes the relative motion of two surfaces in contact. It exists when the surfaces of two bodies are in contact.The answers to the given questions are:

1. See attachment to this answer

2. a = 3.63 m/

3. μ = 0.36

Explanation:

[tex]\mu = 0.306[/tex]

Explanation:

Assume that the direction down the incline is the +x-direction. We can apply Newton's 2nd law along the x-axis as

[tex]x:\:\:\:\:\:mg\sin17° - f_s = ma[/tex]

[tex]\Rightarrow mg\sin17° - \mu N = 0[/tex]

where m is the mass of the bear and g is the acceleration due to gravity and acceleration a is zero since the bear is moving with a constant velocity. Along the y-axis, we can write Newton's 2nd law as

[tex]y:\:\:\:\:\:N - mg\cos17° = 0 \Rightarrow N = mg\cos17°[/tex]

Combining these two equations together, we get

[tex]mg\sin17° = \mu(mg\cos17°)[/tex]

Solving for [tex]\mu, [/tex]

[tex]\mu = \dfrac{\sin17°}{\cos17°} = \tan17° = 0.306[/tex]

The first law is used to visualize this. The ball is at a consistent velocity, unless acted on by another force, when the ball goes upwards and there's no force acting on it, it keeps going upwards, but there is gravity. When the ball is going up, you do not interact with it, thus only gravity is the only force, making the ball go downwards.

To examine this, apply the first law. When the ball is moving upward and there is no force acting on it, it continues to move higher but there is gravity. The ball is at a constant velocity unless pushed upon by another force.

According to Newton's law of gravity, every particle of matter in the universe is attracted to every other particle with a force that varies directly as the product of their masses and inversely as their distance from one another.

Anything that can alter an object's motion is a force. When you toss a ball, you apply force in a direction that determines the direction in which it will move. The ball travels farther the harder you toss it because it is under greater stress.

The ball continues to go upward even though there is no force pushing against it because of gravity. Unless another force pushes on it, the ball is moving at a steady speed.

Thus, this way, when ball thrown vertically into the air shows Newton's first law.

For more details regarding Newton's laws of motion, visit:

https://brainly.com/question/29775827

#SPJ2

Answer:

Friction

Explanation:

The force that opposes motional is friction. Without friction, objects in motion would stay in motion.

Answer:

I think the answer is friction

Explanation:

tell me if I'm right or wrong

We have that for the Question, it can be said that

From the question we are told

From,

[tex]tan\theta = \frac{h}{2}[/tex]

differentiate with respect to h

[tex]sec^2\theta * \frac{do}{dz} = \frac{1}{2} * \frac{dh}{dz}\\\\\frac{dh}{dz} = 2 sec^\theta * \frac{d\theta}{dz}\\\\\theta = \frac{\pi}{6} and \frac{d\theta}{dz} = 0.1rad/min\\\\\frac{dh}{dz} = 2sec^2 (\frac{\pi}{6}) * (0.1)\\\\= 0.266miles/min[/tex]

For more information on this visit

https://brainly.com/question/23379286

The distance mirror M2 must be moved so that one wavelength has produced one more new maxima than the other wavelength is;

L = 57.88 mm

We are given;

Wavelength 1; λ₁ = 589 nm = 589 × 10⁻⁹ m

Wavelength 2; λ₂ = 589.6 nm = 589.6 × 10⁻⁹ m

We are told that L₁ = L₂. Thus, we will adopt L.

Formula for the number of bright fringe shift is;

m = 2L/λ

Thus;

For Wavelength 1;

m₁ = 2L/(589 × 10⁻⁹)

For wavelength 2;

m₂ = 2L/(589.6)

Now, we are told that one wavelength must have produced one more new maxima than the other wavelength. Thus;

m₁ - m₂ = 2

Plugging in the values of m₁ and m₂ gives;

(2L/589) - (2L/589.6) = 2

divide through by 2 to get;

L[(1/589) - (1/589.6)] = 1

L(1.728 × 10⁻⁶) = 1

L = 1/(1.728 × 10⁻⁶)

L = 578790.67 nm

L = 57.88 mm

Read more at; https://brainly.com/question/17161594

Answer:

Explanation:

Let's just have our reference frame travel along with the original un broken mass. This way the original velocity is not relevant.

Each half will have a mass of 770/2 = 385 kg

Each half will have the same magnitude of velocity (conservation of momentum) which will be 2.6 x 10³/2 = 1.30 x 10³ m/s

Now add back the reference frame velocity to get velocity relative to earth.

Section one will have velocity 6.90 x 10³ + 1.30 x 10³ = 8.2 x 10³ m/s

Section two will have velocity 6.90 x 10³ - 1.30 x 10³ = 5.6 x 10³ m/s

In the moving reference frame, each half will have kinetic energy which could only come from the explosion

KE = ½(385)(1.3 x 10³)² = 325,325,000 J

2(325,325,000) = 650,650,000 J released in the explosion.

Rounding to the three significant figures of the problem numerals

E = 6.50 x 10⁸ J or 650 MJ released

QUESTION 1: What conclusion can you make on whether any of the liquids are the same. Explain based on the information in the table.

         Sample 2 & 4 are the same, but in different amounts. We can tell this because, looking at the table, the boiling points and the densitities are the same. The mass and volume may be different, but this is because they are in different amounts as said earlier.

QUESTION 2: Describe what is good and what might be improved about Carl's models in explaining how the three states of water are different in the arrangement of their water molecules.

         Carl's models have a good start. They state how ice is a solid, water is a liquid, and vapor is a gas. It also states how ice has more structure than water and how water has more structure than vapor.

         Some things that could be improved upon is how ice (a solid) will keep it's shape, a liquid (water) will change shape to fit the "bottom" of the container, and how vapor (a gas) will change shape to fill the whole conatiner and will need a lid. His models somewhat show this, but he could add onto it to make it improved.

         I hope this helps, have a nice day! :D

Answer:

The new gravitational pull would be three times as strong as the first which would be 0.000000003 or 3 × 10^-9N.

Explanation:

Hope this helps. . . <3

Answer:

Friction acts in the opposite direction of the velocity. As static friction acts in the opposite direction to the acceleration. (opposite way)

Explanation:

Answer:

is 6

Explanation:

h

Answer:

Since impedance = omega * L we can use the equation for resistance:

20 + 12 + 10 in parallel with 7 we have

J1 = 42 * 7 / 49 = 6 H for the combination on the right

4 H + 6 H + 8 H = 18 H for the entire combination

Answer:

  4.410 mJ

Explanation:

The capacitance is ...

  C = Q/V

  C = (80 μC)/(16 V) = 5 μF . . . . . variable C = capacitance; unit C = coulombs

Then the energy stored at 42 V is ...

  E = 1/2CV² = (1/2)(5 μF)(42 V)² = 4.410 mJ

The 5 μF capacitor stores about 4.41 millijoules at 42 V.

Answer:

A theory not only explains known facts; it also allows scientists to make predictions of what they should observe if a theory is true. Scientific theories are testable. New evidence should be compatible with a theory. If it isn't, the theory is refined or rejected.

Explanation:

Please mark as brainliest! Thanks!

Answer: In ridge push, the mantle wells upward because of the convection and elevates the edges of spreading oceanic plates. Because these plates are higher at the spreading center, they are forced downhill due to gravity and eventually flatten out to the ocean floor.

the answer I need points for my math test

Answer:

A vacuole is in both, plant and animal cells. It's main purpose is to isolate waste products, or in other words making sure that harmful materials won't damage the cell.

Answer:

In animal cells, they help sequester waste. In plants, they help maintain water balance.

Answer:

yes its okay i think so it is the correct answer

The wavelength of the light is 550 nm

For a double slit interference pattern with slit spacing, d we have

dsinθ = mλ where d = slit spacing = 0.22 mm = 0.22 × 10⁻³ m, m = number of maximum fringe = 2(from the picture) and λ = wavelength of light.

Thus sinθ = mλ/d

Also, tanθ = L/D where L = distance between central maximum and fringe = 2.0 cm/2 = 1.0 cm = 1 × 10⁻² m and D = distance between slit and screen = 2.0 m

Since θ is small, sinθ ≅ tanθ

So, mλ/d = L/D

Making λ subject of the formula, we have

λ = dL/mD

Substituting the values of the variables into the equation, we have

λ = dL/mD

λ = 0.22 × 10⁻³ m × 1 × 10⁻² m/(2 × 2.0 m)

λ = 0.22 × 10⁻⁵ m²/4.0 m

λ = 0.055 × 10⁻⁵ m

λ = 0.55 × 10⁻⁶ m

λ = 550 × 10⁻⁹ m

λ = 550 nm

So, the wavelength of the light is 550 nm

Learn more about double slit interference here:

https://brainly.com/question/4449144

Answer: Varies

Explanation: It became more relied upon, technology is responsible for this.

Answer:

All?

Explanation:

As wavelengths get shorter, energy increases, and frequency increases. As wavelenghts get longer, energy decreases, and frequency decreases. We can see the visible spectrum where the side UV has the shortest and strongest waves, but the IR side has the longest and weakest wavelengths.

Answer:

speed

Explanation:

its the speed

because the formula for deriving speed is distance/time

the unit for distance is metre

the unit for time is seconds

so speed is metre/seconds

so speed us m/s.

Answer:

Hi there

The water acquires a vertical velocity component during the fall equal to

Vy = sqrt(2gH) = 25.5 m/s. Its velocity at the bottom is 25.8 m/s, so the horizontal component at the bottom must be sqrt[(25.8)^2 - (25.5)^2] = 3.9 m/s

That must be the horizontal component at the top also, since it does not change during the fall. It is the velocity magnitude there.

Brainliest pls

Answer:

The average atomic mass of an element is the sum of masses of it's isotopes

Each are multiplied by it's natural abundance

Explanation:

The average atomic mass of an element is the sum of masses of it's isotopes

Each are multiplied by it's natural abundance

Answer:

RNA polymerase reads a template strand of DNA 5' to 3'

Explanation:

RNA polymerase is the enzyme accountable for the transcription of the DNA. It shows one coast of the DNA and transcribed within the RNA. It combines the nucleotide to the 3' conclusion of the expanding series of the RNA. It commences the method by connecting to the promoter area of the gene. The enzyme increases nucleotide, not ribonucleotide.

Therefore, A. RNA polymerase reads a template strand of DNA 5' to 3' is false.

Answer:

RNA polymerase reads a template strand of DNA 5' to 3'.

Explanation:

RNA synthesis is less processive during elongation than during initiation. Synthesis begins with the polymerase binding two rNTP molecules. The polymerase frequently releases the nascent transcript before it reaches 8-10 nucleotides in length.

Answer:

I think you just have to input the horizontal velocity component.

Explanation:

Assuming no air resistance

The horizontal velocity is constant at

vx = 17.5cos71 = 5.6974... = 5.70 i m/s

The vertical velocity varies with gravity

vy = 17.5sin71 + -9.81(22) = -199.273... = -199 j m/s

v = 5.70i - 199j m/s

arguably one should round to only two significant digits

Answer:

it would remain the same speed

Explanation: the rock isnt going down a hill or anything so therefore if gravity isnt pulling it down a slope then it would remain the same pace

Answer: William Thomson, better known as Lord Kelvin