The application of solid-state physics that is the study of the arrangement of atoms in a solid is
O metallurgy.
O quantum mechanics.
O crystallography
electromagnetism.

Answer:

a) S =  63.2 km/h

b) V =  63.2 km/h*(-0.316 , 0.949)

Explanation:

Let's define:

North as the positive y-axis

East as the positive x-axis.

Also, remember the relation:

Distance = Time*Speed

Let's assume that she starts at the position (0km, 0km)

Then she travels due North at 90km/h for two hours, then the displacement is

90km/h*2h = 180km to the north

Then the new position is:

(0km, 180km)

Then she travels West at 60km/h for one hour.

Then the distance traveled to the West (negative x-axis) is:

60km/h*1h = 60km to the west

Then the new position is:

(-60km, 180km).

a) The average speed is defined as the quotient between the displacement and the time.

We know that the total time traveled is 3 hours.

And the displacement is the difference between the final position and the initial position.

this is:

D = √( -60km - 0km)^2 + (180km - 0km)^2)=

D = √( (60km)^2 + (180km)^2) = 189.7 km

Then the average speed is:

S = (189.7 km)/(3 h) = 63.2 km/h

b) Now we want to find the average velocity, this will be equal to the average speed times a versor that points from the origin to the direction of the final position.

So, if the final position is (-60km, 180km)

We need to find a vector that represents the same angle, but that is on the unit circle.

Then, if the module of the final position is 189.7 km (as we found above), then the versor is just given by:

(-60km/ 189.7 km, 180km/ 189.7 km)

(-60/189.7 , 180/189.7)

We can just check that the module of the above versor is 1.

[tex]module = \sqrt{(\frac{-60}{189.7} )^2 + (\frac{180}{189.7} )^2} = \frac{1}{189.7}* \sqrt{(-60 )^2 + (180 )^2} = 1[/tex]

Then the average velocity is:

V = 63.2 km/h*(-60/189.7 , 180/189.7)

We can simplify our versor so the velocity equation is easier to read:

V = 63.2 km/h*(-0.316 , 0.949)

Answer:

0.32 m.

Explanation:

To solve this problem, we must recognise that:

1. At the maximum height, the velocity of the ball is zero.

2. When the velocity of the ball is 2.5 m/s above the ground, it is assumed that the potential energy and kinetic energy of the ball are the same.

With the above information in mind, we shall determine the height of the ball when it has a speed of 2.5 m/s. This can be obtained as follow:

Mass (m) = constant

Acceleration due to gravity (g) = 9.8 m/s²

Velocity (v) = 2.5 m/s

Height (h) =?

PE = KE

Recall:

PE = mgh

KE = ½mv²

Thus,

PE = KE

mgh = ½mv²

Cancel m from both side

gh = ½v²

9.8 × h = ½ × 2.5²

9.8 × h = ½ × 6.25

9.8 × h = 3.125

Divide both side by 9.8

h = 3.125 / 9.8

h = 0.32 m

Thus, the height of the ball when it has a speed of 2.5 m/s is 0.32 m.

According to Coulomb's law, rank the interactions between charged particles from highest potential energy to lowest potential energy.

Highest potential energy to lowest potential energy.

b. 1+ charge and 1+ charge seperated by 100 pm

a. 1+ charge and 1- charge seperated by 200 pm

c. 1+ charge and 1- charge seperated by 100 pm

d. 2+ charge and 1- charge seperated by 100 pm

[tex]\circ \: \: { \underline{ \boxed{ \sf{ \color{green}{Happy\:learning.}}}}}∘[/tex]

Answer:

a. None

b. Both

Explanation:

a. Which rider is traveling faster at the bottom?

Since both riders fall from the same height, h, their potential energy, U at the top equals their kinetic energy, K at the bottom.

U = mgh and K = 1/2mv²

Since U is he same for both water-slide riders, then K will be the same and thus their speed at the bottom will be the same. This is shown below.

K = U

1/2mv² = mgh

v² = 2gh

v =√(2gh) where v = speed of rider at the bottom, g = acceleration due to gravity and h = height of slide.

Since the height is the same, so their speed at the bottom is the same. So, none of the riders travels faster than the other since they have the same speed at the bottom.

b. Which rider makes it to the bottom first? Ignore friction and assume both slides have the same path length.

Since the path length of the water slides are the same and friction is neglected, both water-slide rider get to the bottom at the same time since the distance moved is the same and they both start from rest.

So, both riders make it to the bottom at the same time.

The acceleration due to gravity acts vertically downwards, and the component of gravity acceleration is larger when the slope is steeper.

Reasons:

The acceleration of the riders are due to gravity

The component acceleration due to gravity acting on a slope is a = g·sin(θ)

As the steepness of the slope increase, the angle, θ, and sin(θ) increases, therefore, the acceleration increases.

Rider A is on a slide with gentle slope, such that if the slide is flat, rider A will be stationary.

Therefore;

a. The rider that is travelling faster at the bottom is rider B

b. Given that friction is ignored, and the path have the same length to the

bottom, the rider that makes to the bottom first is the rider that is moving

faster, which is rider B

Learn more here:

https://brainly.com/question/13218675

(a) When the spring is compressed 4.5 cm = 0.045 m, it exerts a restoring force on the block of magnitude

F = (1900 N/m) (0.045 m) = 85.5 N

so that at the moment the block is released, this force accelerates the block with magnitude a such that

85.5 N = (1.15 kg) a   ==>   a = (85.5 N) / (1.15 kg) ≈ 74.3 m/s²

The block reaches its maximum speed at the spring's equilbrium point, and this speed v is such that

v ² = 2 (74.3 m/s²) (0.045 m)   ==>   v = √(2 (74.3 m/s²) (0.045 m)) ≈ 2.59 m/s

(b) There is no friction between the block and plane, so the block maintains this speed as it slides over the edge. At that point, it's essentially in free fall, so if y is the height of the plane, then

(7 m/s)² - (2.59 m/s)² = 2gy   ==>   y = ((7 m/s)² - (2.59 m/s)²) / (2g) ≈ 2.16 m

Answer:

Explanation:

Given that:

Focal length for the objective lens = 20 mm, 4 mm, 1.4 mm

For objective lens of focal length f₁ = 20 mm

s₁' = 120 mm + 20 mm = 140 mm

∴

Magnification [tex]m_1 = \dfrac{s'_1}{f_1}[/tex]

[tex]m_1 = \dfrac{140}{20}[/tex]

[tex]m_1 = 7 \ m[/tex]

For objective lens of focal length f₁ = 4 mm

s₁' = 120 mm + 4 mm = 124 mm

[tex]m_1 = \dfrac{s'_1}{f_1}[/tex]

[tex]m_1 = \dfrac{124}{4}[/tex]

[tex]m_1 = 31 \ m[/tex]

For objective lens of focal length f₁ = 1.4 mm

s₁' = 120 mm + 1.4 mm = 121.4 mm

[tex]m_1 = \dfrac{s'_1}{f_1}[/tex]

[tex]m_1 = \dfrac{121.4}{1.4}[/tex]

[tex]m_1 = 86.71 \ m[/tex]

The magnification of the eyepiece is given as:

[tex]m_e = 5X \ and \ m_e = 15X[/tex]

Thus, the largest angular magnification when  [tex]m_1 \ and \ m_e \ are \ large \ is:[/tex]

[tex]M_{large}= (m_1)_{large} \times (m_e)_{large}[/tex]

= 86.71 × 15

= 1300.65

The smallest angular magnification derived when [tex]m_1 \ and \ m_e \ are \ small \ is:[/tex]

[tex]M_{small}= (m_1)_{small} \times (m_e)_{small}[/tex]

= 7 × 5

= 35

The largest magnification will be 1300.65 and the smallest magnification will be 35.

Magnification is defined as the ratio of the size of the image of an object to the actual size of the object.

Now for objective lens and eyepieces, it is defined as the ratio of the focal length of the objective lens to the focal length of the eyepiece.

It is given in the question:

Focal lengths for the objective lens is = 20 mm, 4 mm, 1.4 mm

now we will calculate the magnification for all three focal lengths of the objective lens.

Also, each objective forms an image 120 mm beyond its second focal point.

(1) For an objective lens of focal length   [tex]f_1=20 \ mm[/tex]

[tex]s_1'=120\ mm +20 \ mm =140\ mm[/tex]

Magnification will be calculated as

[tex]m_1=\dfrac{s_1'}{f_1} =\dfrac{140}{20} =7[/tex]

(2) For an objective lens of focal length [tex]f_1= \ 4 \ mm[/tex]

s₁' = 120 mm + 4 mm = 124 mm

[tex]m_1=\dfrac{s_1'}{f_1} =\dfrac{124}{4} =31[/tex]

(3) For an objective lens of focal length [tex]f_1=1.4\ mm[/tex]

s₁' = 120 mm + 1.4 mm = 121.4 mm

[tex]m_1=\dfrac{s_1'}{f_1} =\dfrac{121.4}{1.4} =86.71[/tex]

Now the magnification of the eyepiece is given as:

[tex]m_e=5x\ \ \ & \ \ m_e=15x[/tex]

Thus, the largest angular magnification when  

[tex]m_1 = 86.17\ \ \ \ m_e=15x[/tex]

[tex]m_{large}= (m_1)_{large}\times (m_e)_{large}[/tex]

[tex]m_{large}=86.71\times 15=1300.65[/tex]

The smallest angular magnification derived when

[tex]m_1=7\ \ \ \ m_e=5[/tex]

[tex]m_{small}=(m_1)_{small}\times (m_e)_{small}[/tex]

[tex]m_{small}=7\times 5=35[/tex]

Thus the largest magnification will be 1300.65 and the smallest magnification will be 35.

To know more about magnification follow

https://brainly.com/question/1599771

Answer:

a scale is used to measure the mass of the body

Answer:

Fr = 1.91 * 9*10⁹*q²/L²

Explanation:

Let´s say that the corners of the square are  A B C and D

We are going to find out the force on the charge placed on B  ( the charge placed in the upper right corner.

As all the charges are positive (the same sign), then all the three forces on the charge in B are of rejection.

Force due to charge placed in A

module   Fₓ =  K* q² / L²   in the direction of x

Force due to charge placed in C

module  Fy = K* q²/L²   in the direction of y

Force due to  the charge placed in D

That force will have the direction of the diagonal of the square, and the distance between charges placed in D and A is the length of the diagonal.

d²  =  L²  +  L²  =  2*L²

d  =  √2 * L

The module of the force due to charge place in D

F₄₅ = K*q²/ 2*L²

To get the force we need to add first  Fₓ  and  Fy  

Fx + Fy  =  F₁

module of  F₁ = √ Fx² + Fy²    the direction will be the same as the diagonal of the square then:

F₁   =   √  ( K* q²/L² )²  +   ( K* q²/L² )²

F₁  =  √ 2  *  K*q²/L²

And now we add forces F₁   and F₄₅   to get the net force Fr on charge in point B.

The direction of Fr is the direction of the diagonal and is of rejection

the module is

Fr  =  F₁  *  F₄₅

Fr  =  √ 2  *  K*q²/L²  +   K*q²/ 2*L²

Fr  = ( √ 2 + 0,5 ) * K*q² /L²

K  =  9*10⁹  Nm²C²

Fr = 1.91 * 9*10⁹*q²/L²

We don´t know units of L and q

Answer:

a)  [tex]k=19.6N/m[/tex]

b)  [tex]V_m=0.81m/s[/tex]

c)  [tex]a_m=6.561m/s^2[/tex]

d)  [tex]K.E=0.096J[/tex]

e)  [tex]T=0.78sec[/tex] &[tex]F=1.29sec[/tex]

f)   [tex]mx'' + kx' =0[/tex]

Explanation:

From the question we are told that:

Stretch Length [tex]L=0.150m[/tex]

Mass [tex]m=0.30kg[/tex]

Total stretch length[tex]L_t=0.150+0.100=>0.25[/tex]

a)

Generally the equation for Force F on the spring is mathematically given by

[tex]F=-km\\\\k=F/m\\\\k=\frac{m*g}{x}\\\\k=\frac{0.30*9.8}{0.15}[/tex]

[tex]k=19.6N/m[/tex]

b)Generally the equation for Max Velocity of Mass on the spring is mathematically given by

[tex]V_m=A\omega[/tex]

Where

A=Amplitude

[tex]A=0.100m[/tex]

And

[tex]\omega=angulat Velocity\\\\\omega=\sqrt{\frac{k}{m}}\\\\\omega=\sqrt{\frac{19.6}{0.3}}\\\\\omega=8.1rad/s[/tex]

Therefore

[tex]V_m=A\omega\\\\V_m=8.1*0.1[/tex]

[tex]V_m=0.81m/s[/tex]

c)

Generally the equation for Max Acceleration of Mass on the spring is mathematically given by

[tex]a_m=\omega^2A[/tex]

[tex]a_m=8.1^2*0.1[/tex]

[tex]a_m=6.561m/s^2[/tex]

d)

Generally the equation for Total mechanical energy of Mass on the spring is mathematically given by

[tex]K.E=\frac{1}{2}mv^2[/tex]

[tex]K.E=\frac{1}{2}*0.3*0.8^2[/tex]

[tex]K.E=0.096J[/tex]

e)

Generally the equation for  the period T is mathematically given by

[tex]\omega=\frac{2\pi}{T}[/tex]

[tex]T=\frac{2*3.142}{8.1}[/tex]

[tex]T=0.78sec[/tex]

Generally the equation for  the Frequency is mathematically given by

[tex]F=\frac{1}{T}[/tex]

[tex]F=1.29sec[/tex]

f)

Generally the Equation of time-dependent vertical position of the mass is mathematically given by

[tex]mx'' + kx' =0[/tex]

Where

'= signify order of differentiation

v1f = -0.16 ms

Explanation:

Use the conservation law of linear momentum:

m1v1i + m2v2i = m1v1f + m2v2f

where

v1i = v2i = 0

m1 = 160 kg

m2 = 0.50 kg

v2f = 50m/s

v1f = ?

So we have

0 = (160 kg)v1f + (0.5 kg)(50 m/s)

v1f = -(25 kg-m/s)/(160 kg)

= -0.16 m/s

Note: the negative sign means that its direction is opposite that of the arrow.

Answer:

We can also prove the conservation of mechanical energy of a freely falling body by the work-energy theorem, which states that change in kinetic energy of a body is equal to work done on it. i.e. W=ΔK. And ΔE=ΔK+ΔU. Hence the mechanical energy of the body is conserved

Explanation:

Answer:

9 volts

Explanation:

[tex]v = i \times r \\ v = 2 .5 \times 3.6 \\ v = 9[/tex]

Answer:

Maria Corazon Sumulong Cojuangco Aquino, popularly known as Cory Aquino, was a Filipino politician who served as the 11th President of the Philippines, the first woman to hold that office.

Answer:

Former President of the Philippines

Explanation:

Answer:

Answer:

1hjkeiidjjishhhhbsvvvabzbzbshshshsjsjsjsjsjs

Answer:

a) the most probable speed of the molecules is 409.2 m/s

b) required temperature of xenon is 1322 K

Explanation:

Given the data in the question;

a)

Maximum probable speed of hydrogen molecule (H₂)

[tex]V_{H_2[/tex] = √( 2RT / [tex]M_{H_2[/tex] )

where R = 8.314 m³.Pa.K⁻¹.mol⁻¹ and given that T = 20.3 K

molar mass of H₂; [tex]M_{H_2[/tex] = 2.01588 g/mol

we substitute

[tex]V_{H_2[/tex] = √( (2 × 8.314 × 20.3 ) / 2.01588 × 10⁻³  )

[tex]V_{H_2[/tex] = √( 337.5484 / 2.01588 × 10⁻³  )

[tex]V_{H_2[/tex] = 409.2 m/s

Therefore, the most probable speed of the molecules is 409.2 m/s

b)

Temperature of xenon  = ?

Temperature of hydrogen = 20.3 K

we know that;

T = (Vxe² × Mxe) / 2R

molar mass of xenon; Mxe = 131.292 g/mol

so we substitute

T = ( (409.2)² × 131.292 × 10⁻³) / 2( 8.314  )

T = 21984.14167 / 16.628

T = 1322 K

Therefore, required temperature of xenon is 1322 K

Answer:

time of fall is 1.75 s and the velocity with which it strikes the water is 17.15 m/s.

Explanation:

Height, h =  15 m

Newton's second law

Force = mass x acceleration

The unit of gravitational force is Newton and the value is m x g.

where, m is the mas and g is the acceleration due to gravity.  

Let the time of fall is t.

Use second equation of motion

[tex]s= u t +0.5 at^2\\\\15 = 0 +0.5\times 9.8\times t^{2}\\\\t = 1.75 s[/tex]

Let the final speed is v.

Use third equation of motion

[tex]v^2 = u^2 + 2 a s\\\\v^2 = 0 + 2 \times 9.8\times 15\\\\v =17.15 m/s[/tex]

570k or 1050k

270k+290k= 570k

270k•290k = 1050k

Answer:

the person  is sitting 1.5 m from the left end of the board

Explanation:

Given the data in the question;

Wb = 125 N

Wm = 500 N

T₂ = 250 N

Now, we know that;

T₁ + T₂ = Wb + Wm

T₁ + 250 = 125 + 500

T₁ = 125 + 500 - 250

T₁ = 375 N

so tension of the left chain is 375 N.

Now, taking torque about the left end

500 × d + 125 × 2 = 250 × 4

500d + 250 = 1000

500d = 1000 - 250

500d = 750

d = 750 / 500

d = 1.5 m

Therefore, the person  is sitting 1.5 m from the left end of the board.

Answer:

The second one says cant open file............

Explanation:

The logarithmic damping decrement of a mathematical pendulum is DeltaT=0.5. How will the amplitude of oscillations decrease during one full oscillation of the pendulum

Answer:

Explanation:

There are two main ways to de-starch leaves of a plant - the 'Light Exclusion' Method and the 'Carbon Dioxide Deprivation' Method. The 'Light Exclusion' method is a simpler procedure and is used often. Leaves can be destarched by depriving them of light for an extended period of time, usually 24-48 hours.

Answer:

2.8 MW

Explanation:

There are 7 wind turbines in the wind farm as shown in the diagram. Thus, the energy output by one turbine is 1/7 if the total energy output. So, 19.6/7=2.8MW

Answer: hello your question is poorly written attached below is the complete question

answer :

TA = 1.6*10^-24 * 60 * 2,  TB = 1.6*10^-24 * ( 60 + 30 ) * 2  -- ( option 1 )

Explanation:

a = 2m/s^2

Ta = m₁ a = 60 * 1.6 * 10^-24 * 2 ц

Tb - Ta = m₂ a

∴ Tb = m₂ a  + Ta

       = ( 30 * 1.6 * 10^-24 * 2 ) +  ( 60 * 1.6 * 10^-24 * 2 )

= ( 30 + 60 ) * 1.6 * 10^-24 * 2 ц

I don't know

because I don't know

Answer:

3 years

Explanation:

Find the circumference of each orbit in AU.

2xπx1=6.283185307

2xπx3=18.84955592

Divide them.

18.84955592/6.283185307=3

3 years

Binary code is the answer

Answer:

binary code is the answer of blank

If a person wants to calculate the length of time it takes for a ball to fall from a height of 20m, the correct equation that they should use is:

D. Δt= √2Δd/a

The free fall formula should be used to obtain the length of time that it takes for a ball to fall from a given height. This formula also factors the height or distance from which the fall occurred and this is denoted by the letter d. The small letter 'a' is denotative of acceleration due to gravity and this is a constant pegged at -9.98 m/s².

So, the change in height is obtained and multiplied by two. This is further divided by the acceleration and the square root of the derived answer translates to the time taken for the ball to fall from the height of 20m. Of all the options listed, option D represents the correct equation.

Learn more about free fall here:

https://brainly.com/question/12167131

#SPJ1

Answer:

c. physiological reactions; convey emotional states to other members of the species

Explanation:

Darwin believed that emotional expressions began as physiological reactions that came to have evolutionary value because they convey emotional states to other members of the species. These reactions are used by many different types of species to convey various things.