The back emf in a motor is 72 V when operating at 1800 rpm. What would be the back emf at 2500 rpm if the magnetic field is unchanged?

The magnitude of power needed to keep the car traveling at a constant speed of 80 km/h would be  7 × [tex]10^4[/tex] watts.

The initial speed of the car is 95 km/h = 26.39 m/s, and the final speed is 65 km/h = 18.06 m/s. The change in speed over the 7.0 s interval is:

Δv = vf - vi = 18.06 m/s - 26.39 m/s = -8.33 m/s

The acceleration of the car can be found using:

a = Δv/t = -8.33 m/s / 7.0 s = -1.19 m/s^2

This is the deceleration of the car when it's in neutral. The force of friction acting on the car is:

F = ma = (1400 kg)(1.19 m/s^2) = 1666 N

To keep the car traveling at a constant 80 km/h = 22.22 m/s, a force equal in magnitude but opposite in direction to the force of friction must be applied. The power required to maintain this speed is:

P = Fv = (1666 N)(22.22 m/s) = 37000 W ≈ 3.7 × [tex]10^4[/tex] W

Therefore, the power needed to keep the car traveling at a constant 80 km/h is approximately 7 × [tex]10^4[/tex] watts.

More on power can be found here: https://brainly.com/question/30817666

#SPJ1

The perimeter of the pool is approximately 206.85 feet if we use 3.14 as the approximation of the value of π.

In this case, the angle AOB is 360 degrees, so the arc length is:

arc length = (360/360) x 2π(25) = 50π feet

Finally, we can find the perimeter of the pool by adding up the lengths of the two semicircles and the arc AB:

perimeter = 2πr + 2r + arc length

perimeter = 2π(25) + 2(25) + 50π

perimeter = 50π + 50

Perimeter is a measurement of the distance around the edge of a two-dimensional shape, such as a square, rectangle, or circle. It is the sum of the lengths of all the sides that make up the shape. The perimeter is an important concept in geometry and is used to determine the amount of material needed to enclose or surround a shape, as well as to calculate the distance around a given route or path.

To find the perimeter of a shape, you simply add up the lengths of its sides. For example, if you have a square with sides that are each 5 units long, the perimeter would be 5 + 5 + 5 + 5 = 20 units. Similarly, if you have a circle with a radius of 10 units, the perimeter (also known as the circumference) would be 2πr or approximately 62.8 units.

To learn more about Perimeter visit here:

brainly.com/question/30252651

#SPJ4

Complete Question: -

If AO is 50 feet, find the perimeter of the pool. (O is the center of the sector AOB. OA and OB are the diameters of two semi-circles.)

The above-listed characteristics apply to moving water as an energy source. Thus, moving water can be used as an energy source.

The following are the characteristics of moving water as an energy source:

Water is an excellent resource for producing electricity since it is clean, renewable, and is available in many different forms. When water moves, it has the potential to generate energy, which can be harnessed in several ways to produce electricity. As a result, moving water is an excellent source of renewable energy, as it is available in many different forms and can be used in a variety of ways.The above-listed characteristics apply to moving water as an energy source. Thus, moving water can be used as an energy source.

for such more question on energy source

https://brainly.com/question/19887979

#SPJ11

False. E=hf, where h is Planck's constant, c is the speed of light, f is the frequency, and is the wavelength; and E=hc/, where E is directly proportional to frequency and inversely proportional to wavelength.

With respect to the wavelength of the radiation, photon energy is inversely proportional.

Two formulas can be used to determine a photon's energy: E = h f is a formula that can be used if the photon's frequency is known. This equation, sometimes known as Planck's equation, was created by Max Planck.

To know more about wavelength visit:-

https://brainly.com/question/11625774

#SPJ1

The charge on the capacitor at 7.6 s after the switch is closed is 54.87 µC.

The charge on the capacitor can be calculated using the formula,

Q = Q₀(1-e^(-t/RC))

where Q₀ is the initial charge on the capacitor,

t is the time elapsed,

R is the resistance and

C is the capacitance.

Substituting the given values

Q₀ = 60 µC,

R = 10kΩ,

C = 2 µF, and

t = 7.6 s,

we get

[tex]Q = 60 µC(1-e^(-7.6/(10 \times 10³ \times 2\times 10^-6))[/tex]

   = 54.87 µC

Thus, the charge on the capacitor at 7.6 s after the switch is closed is 54.87 µC.

for such more question on  capacitor

https://brainly.com/question/13578522

#SPJ11

Answer:

True.

Explanation:

Clinical psychologists are mental health professionals who work with individuals, couples, families, and groups to address psychological and emotional problems that affect their daily lives. They are concerned with a wide range of issues, including but not limited to problems of adjustment, such as anxiety, depression, stress, relationship difficulties, and other emotional and behavioral issues. Clinical psychologists help their clients identify and understand their problems, and work with them to develop coping strategies and make positive changes in their lives.

Answer:

TRUE

Explanation:

Clinical psychologists are mental health professionals who work with individuals, couples, families, and groups to address psychological and emotional problems that affect their daily lives. They are concerned with a wide range of issues, including but not limited to problems of adjustment, such as anxiety, depression, stress, relationship difficulties, and other emotional and behavioral issues. Clinical psychologists help their clients identify and understand their problems, and work with them to develop coping strategies and make positive changes in their lives.

Everything but blue & orange would now be present in the spectrum of light observed.

Spectrum refers to a range of different wavelengths of electromagnetic radiation. Electromagnetic radiation is a form of energy that travels through space and includes different types such as radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. Each type of electromagnetic radiation has a different wavelength and frequency, and together they make up the electromagnetic spectrum.

The concept of spectrum is used in a variety of fields, including physics, astronomy, and telecommunications. The spectrum of electromagnetic radiation is essential for many technologies, such as radios and televisions, cell phones, and medical imaging devices, as they all rely on the transmission and reception of specific wavelengths of electromagnetic radiation.

To learn more about Spectrum visit here:

brainly.com/question/11837978

#SPJ4

Complete Question: -

Imagine that the blue light and orange light from the source were blocked. What color(s) would now be present in the spectrum of light observed?

An object's amplitude dramatically increases when the frequency of the applied forced vibrations matches the object's natural frequency. Resonance describes this behavior.

For more information on amplitude of vibration kindly visit to

https://brainly.com/question/1380029

#SPJ1

The number and wattage of lamps required to illuminate the workshop would be approximately 8 lamps and 70 watts respectively.

To estimate the number and wattage of lamps required to illuminate a workshop space of 60x1.5 meters, we can follow these steps:

Calculate the area of the workshop:

Determine the total lumens required:

Adjust for the coefficient of utilization and luminous efficiency:

Adjust for space-height ratio and candle power depreciation:

Determine the number of lamps required:

Determine the wattage of each lamp:

Therefore, approximately 8 lamps with a wattage of 70 watts each would be required to illuminate the workshop space.

More on wattage can be found here: https://brainly.com/question/14667843

#SPJ1

The blocks accelerate at the same charge for the reason that they're linked. The acceleration is a value between zero and g.

Acceleration is a physical concept that refers to the rate of change of an object's velocity with respect to time. When an object's velocity changes, either by speeding up or slowing down, it is said to be accelerating.

Acceleration plays an important role in many aspects of physics, from the motion of celestial bodies to the behavior of particles in a particle accelerator.  The magnitude of acceleration is the rate at which an object's velocity changes, and it is measured in units of meters per second squared (m/s^2) in the International System of Units (SI). There are several factors that can cause an object to accelerate, such as a force acting on it, a change in its direction of motion, or a combination of both.

To learn more about Acceleration visit here:

brainly.com/question/30660316

#SPJ4

The physical processes by which atoms rearrange during phase transformations in the solid state involve changes in the arrangement of the atoms in the lattice, which can be caused by changes in temperature, pressure, or both.

The physical processes by which atoms rearrange during phase transformations in the solid state involve changes in the arrangement of the atoms in the lattice.

This is typically done by changing the number of nearest neighbours of each atom or by introducing new lattice points in the solid structure. In some cases, atoms may even have to move from one position to another.

Common examples of phase transformations in the solid state include melting, recrystallization, and solidification.

Melting occurs when the thermal energy of the solid is increased and the atoms become mobile enough to break the bonds between them. This causes the solid to transition into a liquid phase.

Recrystallization occurs when the thermal energy of the solid is decreased, causing the atoms to return to their original positions and form a new, more ordered lattice.

Lastly, solidification is the reverse process of melting, where thermal energy is removed and the atoms return to their original positions in the lattice.

For similar question on physical processes

https://brainly.com/question/3140029

#SPJ11

The probability that an average of 22 shields will absorb more than 17.1 J/kg is approximately 0.3085.

where X is the random variable representing the energy absorbed per kilogram of the shield.

To calculate this probability, we need to know the distribution of X.

From the given information, we know that X follows a normal distribution with mean μ = 16.8 J/kg and standard deviation σ = 0.6 J/kg.

Thus, we can standardize X as follows:

Z = (X - μ)/σZ ~ N(0, 1)

P(X > 17.1) = P((X - μ)/σ > (17.1 - μ)/σ)

                = P(Z > (17.1 - 16.8)/0.6)

                = P(Z > 0.5)

Using a standard normal table, we can find the probability that Z > 0.5 to be 0.3085 (rounded to 4 decimal places).

Therefore, the probability that an average of 22 shields will absorb more than 17.1 J/kg is approximately 0.3085.

for such more question on probability

https://brainly.com/question/13604758

#SPJ11

"Mars may once have met the requirements for livability, such as having liquid ocean, but at the moment, it top orbit is too thin so it lacks the huge magnetic field needed to support life as we know it.

having great aptitude or power to attract. a magnetic personality; of or pertaining to the a magnet or even to magnetism; of, pertaining to, and characterized by earth's magnetism; magnetized or able to be magnetized.

Yet, some substances have a high magnetic field, meaning that the majority of its electrons spin opposite direction. The strongest magnets are made of these materials because of their great magnetic permeability. They include the elements nickel, cobalt, and iron. The most potent type of magnet is one made of neodymium iron boron (NdFeb).

To know more about magnetic visit:

https://brainly.com/question/2841288

#SPJ1

To determine the time Pete arrives at work, we can start by calculating the total time he spends on his commute and gym routine:

Time spent driving to the gym = 12.5 miles ÷ average speed

We don't know Pete's average speed, so we cannot calculate this.

Time spent in the gym = 45 minutes

Time spent driving from the gym to work = 9 miles ÷ average speed

Again, we don't know Pete's average speed, so we cannot calculate this.

Total time spent on commute and gym routine = time spent driving to gym + time spent in gym + time spent driving from gym to work

= Unknown + 45 minutes + Unknown

Next, we can convert the total time to hours and minutes:

Total time = (Unknown + 45 minutes + Unknown) ÷ 60

= (Unknown + Unknown) ÷ 60 + 45/60

= (2Unknown) ÷ 60 + 0.75

= (Unknown) ÷ 30 + 0.75

We know that Pete needs to arrive at work by 9.00am, so we can set up an equation:

Arrival time = 7.30am + Total time

9.00am = 7.30am + (Unknown/30) + 0.75

Solving for Unknown:

1.5 hours = Unknown/30

Unknown = 45 minutes

Therefore, Pete will arrive at work at 8.15am.

Learn more about time from

https://brainly.com/question/18252403

#SPJ1

we can't give a specific direction for the final momentum.

What is momentum?

Momentum is a physical quantity that describes the motion of an object. It is defined as the product of an object's mass and its velocity. Mathematically, momentum is expressed as:

Momentum (p) = mass (m) x velocity (v)

p = m x v

To solve this problem, we need to apply the law of conservation of momentum, which states that the total momentum of a system remains constant if no external forces act on it.

The initial total momentum of the system is:

p_initial = p_white + p_gray = 25 kg m/s - 30 kg m/s = -5 kg m/s

Since there are no external forces acting on the system, the total momentum of the system after the collision must also be -5 kg m/s. Therefore, the final momentum of the system is:

p_final = -5 kg m/s

The direction of the final momentum can be found by looking at the directions of the initial momenta. Since the white clay has positive momentum and the gray clay has negative momentum, we can say that the white clay is moving to the right and the gray clay is moving to the left before the collision.

During the collision, the two clays will exert forces on each other, causing them to change direction and possibly even break apart. Without more information about the collision, we can't say for sure what the direction of the final momentum will be. It could be to the left or to the right, or some combination of the two. Therefore, we can't give a specific direction for the final momentum.

To know more about Magnitude visit:-

https://brainly.com/question/24468862

#SPJ1

Clock a remains in place and clock b is carried around the earth (40,000 km). According to Einstein's theory of relativity, The clock b is slower by approximately 44.6 seconds.

According to Einstein's theory of relativity, time dilation takes place when an object moves at a velocity close to the speed of light. The closer the velocity is to the speed of light, the more time slows down. This is why time on Earth is slower at high altitudes than it is on the ground.

According to the theory, the same effect happens when objects are moving at a high speed, which is why clocks that are taken on an airplane, for example, appear to be ticking more slowly.

1. The following equation is used to determine the time dilation:

t = t0 / √(1 – v²/c²),

where t is the time elapsed, t0 is the time at rest, v is the velocity, and c is the speed of light. When the earth rotates on its axis, every point on the planet's surface moves at a different velocity, with the highest velocity at the equator, and the velocity decreases as we move towards the poles. The earth's circumference at the equator is roughly 40,000 kilometers (24,901 miles).
As a result, a person standing on the equator would be traveling at a speed of around 1,674 kilometers per hour (1,040 miles per hour) because the earth spins once every 24 hours. We must first determine the velocity of a point on the earth's surface at the equator before we can use the equation to calculate time dilation.

2. We use the formula

v = 2πr / T,

where v is velocity, r is the radius of the earth, and T is the time it takes the earth to complete one rotation. The formula is as follows:

v = 2πr / Tv

= 2 x 3.14 x 6,378 km / 24 hv

= 1,674 km/h

3. Substituting these values into the equation, we get:

t = t0 / √(1 – v²/c²)t = t0 / √(1 – (1,674 m/s)² / (299,792,458 m/s)²)t = t0 / √(1 – 2.8 x 10^-8)t = t0 / 0.9999999714

This means that the clock on the equator will tick slightly slower than it would at rest. The difference in time can be calculated by subtracting the two values:

t – t0 = t0 / 0.9999999714 – t0t – t0 = t0 (1 – 0.9999999714)t – t0 = 0.0000000286 t0

4. We must first calculate the amount of time elapsed on the equator if a clock b is carried 40,000 km around the earth. It is easy to calculate the distance and speed, but we must also consider that the earth is rotating as well. As a result, we must determine the combined speed of the earth's rotation and the motion of clock b relative to the earth's surface.

5. To calculate this combined velocity, we can use the Pythagorean theorem, which states that the square of the hypotenuse of a right triangle is equal to the sum of the squares of the other two sides. If we imagine the velocity of the earth's rotation as the base of the triangle and the velocity of clock b as the height of the triangle, we can use this theorem to calculate the combined velocity as follows:

combined velocity = √(1,674² + vclock²)

where v clock is the velocity of clock b. Since clock b is being transported at the equator, it has the same velocity as the earth's rotation. As a result, we can substitute 1,674 km/h for v clock:

combined velocity = √(1,674² + 1,674²)

combined velocity = √(2 x 1,674²)

combined velocity = 2,367 km/h

6. Substituting the combined velocity into the equation for time dilation, we obtain:

t – t0 = t0 (1 – √(1 – v²/c²))t – t0 = t0 (1 – √(1 – (2,367 km/h)² / (299,792,458 m/s)²))t – t0

= t0 (1 – √(1 – 1.579 x 10^-11))t – t0

= t0 (1 – 0.999999999920215)t – t0

= 0.000000000079785 t0

Converting this value to seconds, we get:

0.000000000079785 t0 = 79.785 ns

Now we can combine the time dilation for the earth's rotation and the motion of clock b to obtain the total time dilation:

t – t0 = 0.0000000286 t0 + 0.000000000079785 t0t – t0 = 0.000000028679785 t0

Substituting the value of t0 (one second) into the equation, we get:

t – 1 = 0.000000028679785 seconds

Therefore, clock b will be approximately 44.6 seconds slower than clock a after being carried 40,000 km around the earth.

For more such questions on Einstein's theory of relativity , Visit:

https://brainly.com/question/3489672

#SPJ11

The average force exerted on the putty by the surface is 0 N this means that the putty experiences no net force and does not accelerate during the 0.30 s it takes to come to rest.

To answer this problem, we may apply the average force equation, which states that average force equals momentum change divided by the period during which the force occurs.

Initially, we must determine the putty's starting momentum. We may employ the momentum equation, which asserts that momentum equals mass times velocity. Because the putty is dropped from rest, its initial velocity is zero, as is its initial momentum.

The ultimate momentum of the putty must then be determined. The putty's final velocity is also zero since it comes to rest. As a result, the putty's ultimate momentum is similarly zero.

Finally, we can substitute the values we found into the equation for average force:

Average force = change in momentum/time interval

= 0 / 0.30

= 0 N

Learn more about the average force at

https://brainly.com/question/29781083

#SPJ4

The correct option is A, If the length of the crank was doubled, you could pull up the water with the same work, but less force.

The term "crank" can have various meanings depending on the context. In the context of machinery or engines, a crank is a mechanical device that converts rotational motion into linear motion or vice versa. It typically consists of a rod with a crankpin that connects to a piston or other reciprocating part.In a different context, the term "crank" can refer to a person who holds unconventional or extreme views and insists on expressing them in a forceful or annoying way.

Such a person may be described as a "crank" or "crankpot." The term can also refer to someone who is mentally unbalanced or eccentric. Furthermore, in the context of illegal drugs, "crank" is a slang term for methamphetamine, a highly addictive stimulant that can cause serious health problems and addiction. It is usually sold in crystalline form and can be smoked, snorted, or injected.

To learn more about Crank visit here:

brainly.com/question/15675129

#SPJ4

Complete Question: -

You are pulling water with a constant velocity from a well using a crank of lengthL . If the length of the crank was doubled, you could ...

A: pull up the water with the same work, but less force

B: pull up the pail with half the number of revolutions

C: exert double the torque while pulling up the pail with half the work

D: pull up the pail with half the work and half the force

E: pull up double the amount of water with the same work

F: exert four times the torque while pulling up the pail with the same work

Answer:

Explanation:

The centripetal acceleration of the race car is given by the formula:

a = v^2 / r

where v is the speed of the race car and r is the radius of the turn.

Substituting the given values, we get:

a = (27.5 m/s)^2 / 57.0 m = 13.3 m/s^2

So the centripetal acceleration of the race car is 13.3 m/s^2.

To find the coefficient of friction, we need to use the formula:

f = μN

where f is the force of friction, μ is the coefficient of friction, and N is the normal force.

The normal force is equal to the weight of the car, which we can calculate as:

N = mg

where m is the mass of the car and g is the acceleration due to gravity (9.81 m/s^2).

Assuming the mass of the car is 1500 kg, we get:

N = 1500 kg × 9.81 m/s^2 = 14,715 N

The force of friction is equal to the centripetal force required to keep the car moving in a circle:

f = ma = (1500 kg)(13.3 m/s^2) = 19,950 N

Substituting the values of N and f into the formula for friction, we get:

19,950 N = μ(14,715 N)

Solving for μ, we get:

μ = 1.35

So the coefficient of friction is 1.35.

Answer:

Solve for force:

Ff = UFn

Ff = 0.75(Fn)

Ff = 0.75(1515 + 1225 * g)

Ff = 20550N

Solve for acceleration:

F= ma

20550N = (1515 + 1225) a

a = 7.5m/s^2

solve for time:

a = d / t^2  --->  7.5m/s^2 = 18.5/ t^2  ----> t = 0.85s

solve for velocity final

Impulse = F * t = 20550N * 0.85s

mv^2 = Impulse = 17467.5

(1515 + 1125)v^2 = 17467.5

vf = 2.5m/s

Plug in stuff:

1515 * v1 + 1125 * (-18.3m/s) = (1515 + 1125) * 2.5m/s

v1 = 9.23

Note: I converted 41mph(v2) to 18.3m/s, which is negative because "westward" is in the negative direction.

Explanation: Inelastic collision

Extra: I'm guessing because the two cars slide, the only force acting on them is the force of friction(so it's our net force), hence the Fnet = ma.

Answer:

Explanation:

When the elevator is accelerating downwards, the apparent weight of the person is reduced, and when the elevator is accelerating upwards, the apparent weight is increased.

First, we need to determine the actual weight of the person. We can do this by using the formula:

Weight = mass x gravity

where mass is the mass of the person and gravity is the acceleration due to gravity, which is approximately 9.81 m/s^2.

Weight = (598.900 N) / (9.81 m/s^2) = 61.048 kg

Now, when the elevator is not moving, the person is only experiencing the force due to gravity, which is:

Weight = mass x gravity = (61.048 kg) x (9.81 m/s^2) = 598.78 N

Therefore, the scale would read approximately 598.78 Newtons when the elevator is not moving.

The angular speed of the Frisbee is 21.33 rad/s.

What is Angular speed ?

Angular speed is a measure of how fast an object is rotating or moving around a central point or axis. It is a scalar quantity, which is defined as the rate of change of the object's angular displacement over time, expressed in units of radians per second (rad/s).

Angular speed is calculated using the formula:

Angular speed (ω) = Δθ / Δt

The linear speed of the outer edge of the Frisbee is given by:

v = 3.2 m/s

The diameter of the Frisbee is given by:

d = 30 cm = 0.3 m

The radius of the Frisbee is half the diameter:

r = d/2 = 0.15 m

The linear speed of a point on the edge of a rotating object is related to the angular speed by the formula:

v = ωr

where ω is the angular speed in radians per second.

Substituting the given values, we can solve for ω:

ω = v/r

ω = 3.2 m/s / 0.15 m

ω = 21.33 rad/s (rounded to two decimal places)

Therefore, the angular speed of the Frisbee is 21.33 rad/s.

To know more about diameter visit:-

https://brainly.com/question/23220731

#SPJ1

The mass of the ball at a height of 3m above the ground with a potential energy of 120J can be calculated using the equation:

Mass = Potential Energy/Gravity * Height

Mass = 120J/(9.81m/s² * 3m)

Mass = 4.1 kg

Answer:

4 kg

Explanation:

Using,

Energy/ Work done = Force x Distance (Height)

E = F • s

But recall, that F = mg

Therefore,

E = m • g • s

Making mass (m), the subject of the formula

m = E / (g • s)

m = 120 / (10 • 3)

m = 120 / 30

m = 4 kg

But if g = 9.8 ms-¹

Then,

m = 120 / (9.8 • 3)

m = 120 / 29.4

m = 4.08 kg

Please mark brainliest.

Thanks

The average power developed by a diesel engine of a 400-Mg train increases the train's speed uniformly from rest to 10 m/s in 100 s along a horizontal track = 200 kW.

The first kinematic equation is v=v0+at , where v is the final velocity, v0 is the initial velocity, a is the constant acceleration, and t is the time

According to given information:

v = 10, v0= 0 , t= 100s, m=400

v=v0+at

10= 0+a(100)  

a= 0.1 m/s²

∑ F =ma  <==>  F= 400(10 ³ )(0.1) = 40(10 ³)N

Pavg = F. Vavg = 40(10 ³)(10/2) = 200 kW

It represents the typical quantity of work completed or energy converted per unit of time. When the context clearly indicates it, the average power is frequently referred to as "power".

The instantaneous power overrides the average power as time interval t gets closer to zero.

For more information on average power kindly visit to

https://brainly.com/question/17008088

#SPJ1

Draw the complete cycle of the wave by repeating the pattern of the peak, the equilibrium position, and the trough, with a distance of λ between each consecutive peak or trough. The number of cycles per second, or the frequency, should be 5.0 hertz.

What is Wave?

A wave is a disturbance that propagates through space and time, often transferring energy from one location to another without the physical transfer of matter. Waves can take many different forms, including sound waves, electromagnetic waves, and mechanical waves.

Draw a horizontal axis representing time, labeled in seconds or milliseconds.

Draw a vertical axis representing displacement or amplitude, labeled in centimeters or meters.

Choose a starting point for the wave, which represents the equilibrium position of the medium.

Draw the peak of the wave, which represents the maximum displacement of the medium from its equilibrium position. This should be 4.0 centimeters above the equilibrium position.

Draw the trough of the wave, which represents the minimum displacement of the medium from its equilibrium position. This should be 4.0 centimeters below the equilibrium position.

Determine the wavelength of the wave, which is the distance between two consecutive peaks or troughs. This can be calculated using the formula λ = v/f, where λ is the wavelength, v is the velocity of the wave, and f is the frequency. For a transverse wave on a string, the velocity is given by v = √(T/μ), where T is the tension in the string and μ is the linear mass density of the string.

Learn more about Wave from the given link

https://brainly.com/question/25699025

#SPJ1

When students brush balloons against their wool sweaters or hair, electrons are moved from the wool or hair to the balloon. As a result, the balloon has a net negative charge, whereas the garment or hair, having shed negative charges, has a net positive charge.

The term "net" refers to the sum after both positive and negative costs have been deducted. So, if something has 321 positive charges and 319 negative charges, the overall charge is 321 - 319 = +2. The overall charge is 37 - 42 = -5 if it includes 37 positive charges and 42 negative charges.

Electrons are negatively charged, whereas protons are favourably charged. Atoms have an identical amount of electrons and protons and have a net charge of zero. This makes atoms always neutral.

Learn more about net charge

https://brainly.com/question/30196320

#SPJ1

The absolute pressure on the bottom of a swimming pool 28.0 m by 8.5 m whose uniform depth is 1.8 m is 287 kPa

the absolute pressure on the bottom of the pool is 17.6 kPa.

Pressure is defined as the amount of force per unit area applied to an object's surface. Pressure may also be defined as a scalar amount of stress exerted on a surface that is perpendicular to the direction of the force. Pressure is frequently represented by the symbol p, which stands for pressure.

Given,

Length of the pool, l = 28 m

Width of the pool, w = 8.5 m

Depth of the pool, h = 1.8 m

The density of water,

p = 1000 kg/m³

g = 9.81 m/s²

Absolute pressure formula:

p = ρgh

Absolute pressure p is given by,

p = ρgh

p = 1000 kg/m³ × 9.81 m/s² × 1.8 mp

  = 17604 Pa

Then, Converting the answer to kPa,

1 Pa = 1 × 10⁻³ kPa⇒ 17604 Pa = 17.6 kPa

Therefore, the absolute pressure on the bottom of the pool is 17.6 kPa rounded to two significant figures.

for such more question on  pressure

https://brainly.com/question/28012687

#SPJ11

Given the fact that the linear velocity of the ball is tangential to the circle then it is shown by vector B

When a ball flies out of a circular path, the direction of its tangential velocity is tangent to the point at which it leaves the circular path.

To visualize this, imagine a ball tied to a string and whirled around in a circle. As the ball is released, it will move away from the center of the circle in a straight line. At the moment it leaves the circular path, its velocity vector will be tangent to the circle, pointing in the direction of its motion.

If the ball is flying out of the circle in a clockwise direction, then its tangential velocity vector will point to the right. If it is flying out of the circle in a counterclockwise direction, then its tangential velocity vector will point to the left.

Learn more about tangential velocity:https://brainly.com/question/28738284

#SPJ1