The diesel fuel cooler is being discussed. Technician A says that high-pressure fuel systems generate a lot of heat. Technician B says that temperature affects the density of the diesel fuel. Which technician is correct

Answers

Answer 1

Answer:

Both the technicians are correct.

Explanation:

As the pressure increases the temperature will also increase in accordance with the Boyle's law hence greater amount of heat is formed.

[tex]Pressure\propto Temperature[/tex]

When the temperature increases the intermolecular spaces increase as the molecules of the fuel gain energy and their kinetic energy increases. This is limited to temperatures below dissociation/combustion temperature of diesel .


Related Questions

Fill in the blank by selecting the answer from the drop-down menu.

Creative Commons allows the creator of an artistic work to

Never show the work to anyone.
Share the work in the way she chooses.
Play the song on the street.
Replace copyright with freedom of speech.

Answers

Answer:

B. share the work in the way she chooses

Explanation:

Answer:

B. Share the work in the way she chooses.

Explanation: I just did it on edge 2023! Hope this helps.

Who will win the Copa America 2021 and Euros 2021?

Answers

Brazil will win copa America

Answer:

Brazil will win copa america

Explanation:

different between an architect and an engineer​

Answers

different between an architect and an engineer

Civil engineers work on the construction of the building. ... In short it can be said that while an Architect is a building designer, a Civil Engineer is a structural expert, who in

9. SAFELY BACKING UP YOUR VEHICLE INCLUDES ALL OF THE FOLLOWING
EXCEPT:
A. Looking over your right shoulder as you back up
O B. Checking behind your vehicle before you get in
C. Tapping your horn before you back up

Answers

C, that is the most logical answer

Which is one factor that scientists use to classify orders of soil?Which phrase best describes the biosphere?

Answers

Classify orders of soil, Climate, Plant type, & Soil Composition.

what is the si unit of potential difference​

Answers

Answer:

The answer is volt (V).

Explanation:

Volt is the SI unit of potential difference. The symbol of volt is V.

Represent each of the following units as a combination of primitive
dimensions where M=mass, L=length, T=time

PLS show work

Watt

Newton

Horsepower

Answers

Some important and basic points:

Unit of time is second (s).

Unit of mass is kilogram (kg).

Unit of distance/displacement is meter (m).

P.S. Displacement and distance are nearly same things, their unit is same.

Speed/velocity = distance/time

So, its unit is m/s.

Acceleration = (final velocity-initial velocity)/time.

So, its unit is m/s² or m.s^-2

We know from the formula that,

Force = mass × acceleration

=> F = ma

Putting units:

Newton = kg.m/s² or kg.m.s^-2 _____(1)

Putting dimensions:

Newton = M.L.T^-2

________________________

We know from the formula that,

Work = force × displacement

=> W = Fs

Putting units:

Joule = Newton.m

=> Joule = kg.m.s^-2.m [from (1)]

=> Joule = kg.m².s^-2 ______(2)

Putting dimensions:

Joule = M.L².T^-2

________________________

We know from the formula that,

Power = work/time

Putting units:

Watt = joule/s

=> Watt = kg.m².s^-2/s [from (2)]

=> Watt = kg.m².s^-3 ______(3)

Putting dimensions:

Watt = M.L².T^-3

________________________

We know from the formula that,

Horsepower = 746 watt

=> Horsepower = 746kg.m².s^-3 [from (3)]

Putting dimensions:

Horsepower = 746M.L².T^-3

Hope it helps!!

The dimension of Watt, Newton and horsepower are ML²T⁻³, MLT⁻² and ML²T⁻³ respectively

Units and dimension

Units are measure of a quantity. Dimensions are derived from the units. Gi

Force = mass × acceleration

For Newton:

Another representation for unit of Newton is  kg.m/s². Writing in terms of the dimension

Newton = MLT⁻²

For Watts;

The unit of Watt is also kg.m².s⁻²/s which is equivalent to  kg.m².s⁻³

In terms of dimension

Dimension of Watt = ML²T⁻³

For Horse power:

The unit of horse power is  kg.m².s⁻³

Dimension of horsepower = ML²T⁻³

Learn more on units and dimension here: https://brainly.com/question/28464

#SPJ2

Exam Guidelines
Exam Instructions
Question 8 of 15 :
Select the best answer for the question.
8. You've been contracted to install hardwood flooring on a basketball court. The court
measures 125' x 70'. How many square feet of flooring do you need to order for the job?
Allow 20% for waste.
k
O A. 10,500 sq. ft.
O B.234 sq. ft.
O C. 100,500 sq. ft.
O. D. 8,750 sq. ft.

Answers

Answer:

our answer is d because if you multiple 125 by 70 and subtracted from 20 you Will get D.8,750 sq. ft.

Answer:

A. 10,500 sq. ft.

Explanation:

125*70 is 8750 and 20% of 8750 is 1750 so you add it and get 10,500

rt this question on a NEW page Give ONE word/tem for each of the following descriptions by choosing a word/term from the list below. Write only the word/term next to the question numbers (1.1.1. to 1.1.5) in the ANSWER BOOK, e.g. 1.1.6 casement curiog: electroplating: . galvanising; powder coating; paint; turpentine; sanding sealer 1.1.1 Available in a water- or oil-based liquid 1.1.2 Allows concrete to achieve its optimal strength 1.1.3 Coating a metal by the process el electrolysis 1.1.4 Can be melted again because nc chemical process is involved 1.1.5 Adds strength to the original uncoated metal FIGURE 1.2 below shows equipment that is used on a construction site​

Answers

Answer:

oh I am sorry I can't understand your question.

How to programe a disk

Answers

Answer:

insert the disk in the laptop, wait of a minute or 2 and then a folder will open in my PC.

Determine the dimensions for R if R = m V / (d^2 Q) where m is a mass, V is a velocity, d is a diameter, and the dimensions of Q are M/(LT).


No dimensions


M / (L T^2)


M L / T^2


M


L / T

Answers

Answer:

No dimension

Explanation:

The given equation is [tex]R = \dfrac{m \cdot V}{d^2 \cdot Q}[/tex], where;

m = Mass

V = Velocity

d = A diameter

The dimension of mass quantity = M

The dimension of the velocity quantity = L/T

The dimension of the dimeter quantity = L

The given dimension of Q = M/(L·T)

Therefore, we get;

[tex]The \ dimension \ of \ R = \dfrac{M \times L/T}{L^2 \times (M/LT)} = \dfrac{M \times L/T}{L \times M/T} = 1[/tex]

Therefore, R has no dimensions

what is grain of timber​

Answers

Grain of timber is a clear grain direction, which appears differently depending on how the board is sawn. Technically 'wood grain' refers to the alignment, texture and appearance of wood fibres, whereas it's 'figure' describes the pattern created by the grain orientation.

The Hubble Space Telescope is an optical imaging telescope with extremely good angular resolution. Someone discovers an object that Hubble cannot see at all. How might they have found it?

Answers

Answer:

Through the use of Hubble Space Telescope that's why they might find it or enlarging the resolution of a telescope.

In the event you get pulled over for a traffic stop, describe the situation from the police officers perspective. Please give me the right answer.

Answers

Answer:

The police officer probably saw me violate a rule of the traffic law, thus why he pulled me over for a traffic stop. He definitely expects from me, that I will cooperate with him, and not give him any trouble. Furthermore, he would also be keeping a tight watch over me and my actions, and try to read my intentions.

The mathematical equation that explains the engineering relationship between inputs and outputs is called the ___________.

Answers

Answer:

Production function

Explanation:

A production function is a method of determining the difference between what goes into and what comes out of output. The formula Q = f(K, L, P, H) determines how much output you can receive from a given number of inputs. Labor (L), or individual worker input, is one of the production elements.

The low-pressure fuel system is being discussed. Technician A says that the system must provide an adequate volume of fuel to the high-pressure fuel injection system. Technician B says that the system must provide fuel at a minimum pressure to the high-pressure fuel injection system. Which technician is correct

Answers

Answer:

Hence Both technicians A and B are correct that is Technician A says that the system must provide an adequate volume of fuel to the high-pressure fuel injection system. Technician B says that the system must provide fuel at a minimum pressure to the high-pressure fuel injection system are true.

Explanation:

The low-pressure fuel system contains the fuel filters; A fuel level sending unit/tank pick-up; A transfer pump. So from considering both technicians statements both are applicable.

Explanation:

MARK ME AS A BRIANLIEST .........

In which subject, we should focus more to study ICT ?​

Answers

Answer:

for me maybe english, math and sience

Focus on developing your practical computer science skills. Studying the night before a deadline not work. Don’t expect to learn everything during courses. Don’t be a Lonewolf. Remember you still have a life.

Yall pls help me out
Determine the dimensions for T if T = M V^2 A / L^3 where M is a mass, V is a velocity, A is an area, and L is a length.


L / T


No dimensions


M L / T^2


M


M / (L T^2)

Answers

Answer:

M·L/T²

Explanation:

The given equation for T is presented as follows;

[tex]T = \dfrac{M \cdot V^2 \cdot A}{L^3}[/tex]

Where;

m = Mass with dimension M

V = Velocity, having the dimensions L/T

A = Area, having the dimensions L²

l = Length, having the dimensions, L

Therefore;

[tex]The \ dimensions \ of \ T = \dfrac{M \times (L/T)^2 \cdot L^2}{L^3} = \dfrac{M \times L^4/T^2 }{L^3} = M \cdot L/T^2[/tex]

Pls help me, I really need to understand this
Determine the dimensions for W if W = P L^3 / (M V^2) where P is a pressure, L is a length, M is a mass, and V is a velocity.


No dimensions


M


M / (L T^2)


L / T


M L / T^2

Answers

Answer:

ML/T^2

this is the correct answer

Explain The Basic Difference Between Bs2 And Bs3 Engine.​

Answers

Answer:

The main difference between the bs2 and bs3 engine is to present in the catalytic converter. And in bs2 engines the catalytic converter is does not used for the formation of hc and co. In bs3 engine there is no harmful emissions in the hc and co

Which of the following statements is correct?

Adhesive bonding allows several individual parts to be connected with nuts and bolts.

Rivets are temporary fasteners that bind two plates of metal together.

Both soldering and brazing are structurally stronger than welding.

Hardware assembly is primarily used when there is a need of being able to take individual parts out of an assembly throughout the life cycle of the product.​

Answers

Answer:

b. rivets are tempory fasteners that bind two plate of metals together

explain what will happen if the series circuit is closed?

Answers

Answer:

When the circuit switch is off, no electricity will flow and then the circuit is called an open circuit. Electricity will not flow in open circuit.

Explanation:

A closed circuit has a complete path for current to flow. ... This can happen when two bare wires in a circuit touch each other. The part of the circuit bypassed by the short circuit ceases to function, and a large amount of current could start to flow. This can generate a lot of heat in the wires and cause a fire.

The air compressor governor controls the cut-in and cut-out of the compressor. What are the cut-in and cut-out, typically

Answers

Answer:

Air Compressor Governor

Explanation:

The governor regulates how much air is pumped into the air pumping stations by the air compressor. The governor prevents the compressors from blowing air whenever the air pressure exceeds the "cut-out" level (about 125 pounds per square inch or "psi").

The transition from 85 to 100 psi will take no more than 45 seconds. During the build-up, keep an eye on the air pressure gauge to guarantee appropriate air system performance.

George is replacing a burned out resistor in a circuit board. The board has a 10, a 20, and a 40 on resistor, all in parallel. When George has sided in the new component in the circuit is fixed, he checks his multimeter. What reading does he get?

Answers

Answer:

5.71 ohms

Explanation:

put it in the calculator

Pls help me Extra points
Represent each of the following units as a combination of primitive
dimensions where M=mass, L=length, T=time

Kilometer

Quart

Pascal

Watt

Newton

Horsepower

Answers

Kilometer = 1000m

Quart = 0.000946m³

Force = mass × acceleration

=> F = ma

Putting units:

Newton = kg.m/s² or kg.m.s^-2 _____(1)

Pressure = force/area

Putting units:

Pascal = Newton/m²

=> Pascal = kg.m.s^-2.m² [from (1)]

=> Pascal = kg.m^-1.s^-2

Work = force × displacement

=> W = Fs

Putting units:

Joule = Newton.m

=> Joule = kg.m.s^-2.m [from (1)]

=> Joule = kg.m².s^-2 ______(2)

Power = work/time

Putting units:

Watt = joule/s

=> Watt = kg.m².s^-2/s [from (2)]

=> Watt = kg.m².s^-3 ______(3)

Horsepower = 746 watt

=> Horsepower = 746kg.m².s^-3 [from (3)]

Hope it helps!!

Herramientas para la instalación de un picaporte

Answers

Answer:

Un picaporte es una palanca en ángulo para abrir y cerrar una puerta a mano. Por lo general, el picaporte se empuja hacia abajo para abrir la puerta. El mecanismo de la cerradura de la puerta hace que el pestillo de la cerradura se salga de la placa de la cerradura mediante la rotación del pasador. No es necesario accionar el pestillo para cerrar la puerta, ya que el pestillo encaja automáticamente en su lugar.

La conexión entre las manijas de las puertas, que generalmente están unidas a ambos lados de la hoja de la puerta, se realiza mediante un pasador cuadrado. El mandril también establece la conexión con el mecanismo de la cerradura: su escuadra es guiada a través de la escuadra interior del seguidor de la manija de la cerradura, para que gire junto con ella.

Por lo tanto, las herramientas que tienen un rol en la instalación de un picaporte son, principalmente, una agujereadora para ingresar las fijaciones, destornillador y tornillos, martillo y clavos.

what is 222 divided by 11.2

Answers

Answer:

The answer of this question is 19.89142857

Answer:

The number 222 is called the numerator or dividend, and the number 11 is called the denominator or divisor.

The quotient of 222 and 11, the ratio of 222 and 11, as well as the fraction of 222 and 11 all mean (almost) the same:

222 divided by 11, often written as 222/11.

Read on to find the result of 222 divided by 11 in decimal notation, along with its properties.

Explanation:

PLS HELP
Determine the dimensions for T if T = M V^2 A / L^3 where M is a mass, V is a velocity, A is an area, and L is a length.



L / T



No dimensions



M L / T^2



M



M / (L T^2)

Answers

Answer:

T=kg·m^2/s^2

Explanation:

T = kg (m^2/s^2) m^3 /m^3

Here I wrote down the unit for every dimension.

T=kg m^2 / s^2

m^3 is divided between m^3, this is equal to 1.

Result: T=kg·m^2/s^2

PD: I'm not sure if this is what you ask for. I hope it helps

Unit conversions
2225 Pa = ___________ BTU

pls answer this thank you

Answers

Answer:

2225 Pa = 2.10 BTU

Explanation:

The relationship between the Pascal and british thermal unit (BTU) is as follows :

1 pascal = 0.00094781707774915 BTU

If we want to convert 2225 Pa to BTU, we will use the above conversions.

So,

2225 Pa = 2225 ×0.00094781707774915

= 2.10 BTU

So, 2225 Pa is equal to 2.10 BTU.

True or false: Units and dimensions are interchangeable words that describe the same concept.

True

False

Answers

Answer:

The answer to this is false

Explanation:

It is FALSE that units and dimensions are interchangeable words that describe the same concept.

What are units and dimension?

Units is defined as a measure of quantity while dimension specify the measure of a line or curve.

Both terms cannot be used interchangeably even though the dimensions of a quantity is derived from its units.

Learn more o unit ad dimension here: https://brainly.com/question/28464

#SPJ2

Other Questions
Which forms of energy determine temperature: translational kinetic energy, rotational kinetic energy, vibrational kinetic energy, or all of these how does your career path affect your retirement In 25 words or fewer, is this solution reasonable? Why or why not? Who was the most influential political candidate proposing communist idealism in America during the progressive era? find the area of the rectangle whose dimensions are 9cm and 8cm. Which ocean borders Africa eastern coasts?A.Atlantic OceanB.Indian Ocean C.Pacific OceanD.Arctic Ocean Elk, a C corporation, has $370,000 operating income and $290,000 operating expenses during the current year. In addition, Elk has a $10,000 long-term capital gain and a $17,000 short-term capital loss. Elk's taxable income is: let's write the whole numbers from 90 to 100 . Select the appropriate number to form the following sets . Then , write the type of sets .A={ even number}B={ odd number}C={ X:X is a prime numbers}D={ y:y is a composite number}E={z:z is a square number}F={ cube number}G={ multiples of 7}H={ X:X is divisible by 11} Michael wants to buy some new exercise equipment for his home gym for 372,000 financial at an annual interest rate of 12% using the add on method. If michael wants to pay off the loan in 2 years. What will be his monthly payment? which line has an undefined slope?? What was one major similarity between the Marshall Plan and the MolotovPlan?A. Both excluded Germany and Japan because of their roles instarting World War II.B. Both were designed to drain economic resources from Europefollowing World War II.C. Both represented unifying actions taken by the newly formedUnited Nations.D. Both were launched because of the rivalry between the UnitedStates and the Soviet Union. find the positive square root of 7.3441 115Find the value of x.A) 4rad5B) 8rad5C) 6D) 16 Darin Company uses a perpetual inventory system. On October 1, Darin Company sold inventory in the amount of $6,500 to Dee Company, terms 2/10, n/30. The items cost Darin $4,200. On October 4, Dee returns some of the inventory. This inventory had a selling price of $500 and a cost of $200. On October 8, Dee Company paid Darin Company the amount due on that date. Use the information above to answer the following question. What journal entry will be prepared by Darin Company on October 8 to record the receipt of payment from Dee What is an approach for service firms trying to accelerate the creation of their own expert performers She is so stubborn, that no one can influence her. Change this sentence by using too and to. 2. Many microscopic organisms are clear, making them almost impossible to see under a microscope.What can be done to a sample to make it easier to see? A small radio transmitter broadcasts in a 69 mile radius. If you drive along a straight line from a city 93 miles north of the transmitter to a second city 78 miles east of the transmitter, during how much of the drive will you pick up a signal from the transmitter? true or false In Peru, a man and a woman meeting for the first time would probably greet each other with an "air kiss." Stationary waves areA) transverse wavesB) longitudinal wavesC) mechanical waves