The emission spectrum of hydrogen is shown below. What do the lines in the
spectrum show?

A. Light with wavelengths between 410 nm to 434 nm, 434 to 486 nm, and 486 to 656 nm corresponds with the three energy levels in
hydrogen
B. Only light with wavelengths of 410 nm, 434 nm, 486 nm, and 656 nm is not taken in during energy transitions.
C. Light with wavelengths of 410 nm, 434 nm, 486 nm, and 656 no corresponds with the four energy levels in hydrogen.
D. Light with wavelengths of 410 nm, 434 nm, 486 nm, and 656 nm is given off when electrons fall to lower energy levels.

Answer:A

Explanation:

Option D. They all have extremely long half-lives makes radioisotopes useful for dating objects.

Radioisotopes exist as radioactive isotopes of an element. They can also be described as atoms that include an unstable combination of neutrons and protons, or surplus energy in their nucleus.

A radionuclide exists as a nuclide that contains excess nuclear energy, causing it unstable. This excess energy can be utilized in one of three methods: emitted from the nucleus as gamma radiation; assigned to one of its electrons to terminate it as a conversion electron; or utilized to create and emit a unique particle from the nucleus.

Radioactive isotopes of radium, thorium, and uranium, for example, exist found naturally in rocks and soil. Uranium and thorium also happen in trace amounts in water. Radon, induced by the radioactive decay of radium, stands present in the air.

Hence, Option D. They all have extremely long half-lives makes radioisotopes useful for dating objects.

To learn more about radioisotopes refer to:

https://brainly.com/question/18640165

#SPJ2

Answer:

it would be option A

Explanation:

This is becuase if you look at the chart you can see tyhat the group of rats that got feed to vitamans did gain more wati then the ones on the normal diet.

Answer:

b because it is just 0.2 g and powdered sugar has more contact surface than granulated sugar or sugar cube

The solubility can be given as the amount of solute that can be dissolved in the 100 ml of the solution. The most rapidly dissolved sugar in water is 0.2 gram powdered sugar.

The contact surface can be given as the area of the compound that is in direct contact with the solution.

The solubility of the compound is found more in the solute with increased surface area.

The surface area of powdered sugar will be maximum, as more granules of the sugar will be in contact with the water than the cube or the granulated sugar.

Thus, the most rapid dissolution in water is found with 0.2 grams of powdered sugar. Thus, option B is correct.

Learn more about solubility, here:

https://brainly.com/question/13620168

Answer:

That is, a pH meter is useful in detecting or knowing the acidity (due to ions) or alkalinity (due to ions) of a solution. Thus, we can conclude that out of the given options it is true about a pH meter that it can be used in any acid-base titration

Answer: D. It can be used in any acid-base titration.

Explanation:

Answer:

The actual sequence of steps which describe the life cycle of a lake is given below:

C. Runoff fills a depression - sediments build up

- water rises continuously

Explanation:

This is because, the water which builds up as a result of the runoff water accumulating on the depression helps towards building up. When it must have accumulated greatly, it ends up forming a lake.

Answer:

D. Point into Leaf: water(H₂O), carbon dioxide (CO₂) sunlight, Point away from leaf: Sugars, oxygen (O₂)

Explanation:

Photosynthesis is the process used in the production of chemical energy in the form of energy containing organic compounds and oxygen from atmospheric carbon dioxide and liquid water enabled with the energy captured from light (mainly Sunlight) by the chlorophyll in green plants and other organisms

The basic chemical reaction involved in a photosynthesis reaction is presented as follows;

[tex]{}[/tex]                                    Sunlight

[tex]{}[/tex]                                          ↓

[tex]{}[/tex]       CO₂           +  H₂O (l)  →   C₆H₁₂O₆   +    O₂

Carbon dioxide [tex]{}[/tex]  Water        Glucose       Oxygen    

Hola aquí va la respuesta!

Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.

Hola aquí va la respuesta!

Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.

Answer:

2NH4^+(aq) + 2OH^-(aq) ----->2NH3(g) + 2H2O(l)

Explanation:

Molecular balanced reaction equation;

2NH4Cl (aq) + Mg(OH)2---->2NH3 (g) + 2H2O (l) + MgCl2 (aq)

Complete ionic reaction equation;

2NH4^+(aq) + 2Cl^-(aq) + Mg^2+(aq) + 2OH^-(aq) ----->2NH3(g) + 2H2O(l) + Mg^2+(aq) + 2Cl^-(aq)

Net Ionic reaction equation;

2NH4^+(aq) + 2OH^-(aq) ----->2NH3(g) + 2H2O(l)

Answer:

Por ejemplo, el petróleo o el carbón son ejemplos de recursos no renovables porque, aunque se forman mediante un proceso natural, este necesita demasiado tiempo. ... Esos combustibles fósiles provienen de materia orgánica, pero tardan cientos de miles de años en producirse.

REACTION TYPE:

Single displacement/Oxidation-reduction

(Hope this helped UwU)

Answer:

Synthesis reaction is the answer

Answer: The correct net ionic equation for the reaction is [tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]

Explanation:

Net ionic equation is defined as the equations in which spectator ions are not included.

Spectator ions are the ones that are present equally on the reactant and product sides. They do not participate in the reaction.  

The balanced molecular equation is:

[tex]Ca(OH)_2(aq)+H_2SO_4(aq)\rightarrow CaSO_4(aq)+2H_2O(l)[/tex]

The complete ionic equation follows:

[tex]Ca^{2+}(aq)+2OH^-(aq)+2H^+(aq)+SO_4^{2-}(aq)\rightarrow 2Ca^{2+}(aq)+SO_4^{2-}(aq)+H_2O(l)[/tex]

As calcium and sulfate ions are present on both sides of the reaction. Thus, they are considered spectator ions.

The net ionic equation follows:

[tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]

Hence, the correct net ionic equation for the reaction is [tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]

Answer:

B. no reaction     

Explanation:

Answer:

Vaporization

Since the question does not specify what molecule is being acted upon by the increment in temperature, I'll assume it's water.

When first taken out of the fridge, water is in the form of ice, and it has not been affected by a change in temperature yet, so it's at the origin.

(origin = ice)

As you raise the temperature, however, the ice starts to melt, and melting occur during phase 2. You have to keep the temperature constant for the process to properly occur.

(phase 2 = melting)

After it finishes melting, the ice is now in it's liquid state, which is water. The temperature continues to rise in order to proceed to the next phase.

(2nd slope = water)

Lastly, Water is being vaporized during phase 4. Notice, the temperature is kept constant in order to allow the process to properly occur.

(phase 4 = vaporization)

Answer:

La reacción de etano, CH₃CH₃ y cloro, Cl₂ en presencia de luz solar se conoce como reacción de halogenación.

Los radicales de cloro se forman cuando el cloro se expone a la luz solar a continuación;

Cl₂ → 2Cl *

Se forma un radical etano cuando el etano, C₂H₆ reacciona con un radical libre de cloro, Cl *, como sigue;

C₂H₆ + Cl → C₂H₅ * + HCl

Se forma un producto halogenado cuando un radical libre de etano reacciona con una molécula de cloro como sigue;

C₂H₅ * + Cl₂ → C₂H₅Cl + Cl *

Un producto halogenado puede reaccionar además con un radical libre para producir como sigue;

C₂H₅Cl + Cl * → C₂H₅Cl₂

Explanation:

Number of subatomic particles=35+36+35=106

Explanation:

Atomic number=35

Mass number=71

No. of proton p=35

No. of neutron n=71−35=36

No. of electron e=35

Answer:

C Fluorine

Explanation:

Answer:

As organisms release energy during cellular respiration, carbon dioxide is produced from the carbon in energy storage molecules. ... Carbon dioxide in the biodome decreased because decomposers decreased which means there was a decrease in cellular respiration overall.

btw :

stay safe! :3

Answer:

They grow slowly over time, they are made up of multiple organisms.

Explanation:

One polyp is one individual. A Coral is made up of several polyps. Each polyp is less than 1 centimeters but a coral is made of many polyp so the coral itself cant be 1 centimeters across.

Answer:

Just add a plenty of dots in the first one and very few dots in the second one

An area with high population density will have many dots while areas will low population density will have few dots when using dots to illustrate population density.

Population density is the ratio of the total number of organisms found in a given area to the total of the area of that place or habitat.

An area with high population density indicates that more organised ate found per unit area than an area with low population density.

Therefore, using dots to illustrate population density, an area with high population density will have plenty dots while areas will low population density will have few dots scattered over.

Learn more about population density at: https://brainly.com/question/13902749

Answer: The value of [tex]\Delta H[/tex] is -163 kJZ

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

We are given:

Given mass of water = 72.0 g

Molar mass of water = 18 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of water}=\frac{72.0g}{18g/mol}\\\\\text{Moles of water}=4mol[/tex]

Calculating the heat released for the condensation process:

[tex]\Delta H=n\times \Delta H_{(vap)}[/tex] ......(2)

where,

[tex]\Delta H[/tex] = amount of heat released

n = number of moles of water = 4 moles

[tex]\Delta H_{(vap)}[/tex] = specific heat of vaporization = -40.7 kJ/mol

Negative sign represents the amount of heat released.

Putting values in equation 2:

[tex]\Delta H=4mol\times (-40.7kJ/mol)=-163kJ[/tex]

Hence, the value of [tex]\Delta H[/tex] is -163 kJ

Answer:

B. Prepare solutions of different acid concentrations, measure 50 milliliters of each into different beakers, and place metal samples of different types but of the same mass into the beakers.

Explanation:

Since Michael is studying the factors that affect corrosion of metals, and wants to test the effect that different concentrations of an acid will have on the corrosion of a metal, using different acid concentrations of the same volume on different metal samples of the same size would give a much better than all the other options because, a standard volume of acid is used and also a standard mass of metal is used. So, the effect can be measured quantitatively since we have the same quantity of sample.

So, option B is the answer

Answer:

Please find the answer to the question below

Explanation:

In chemistry, the following mathematical formula is used to calculate the number of moles contained by a substance:

mole = mass of substance (g)/molar mass of substance (g/mol)

Molar mass of salicylic acid (C7H6O3) = 12(7) + 1(6) + 16(3)

= 84 + 6 + 48

= 138g/mol

Mass = 5.50grams

mole = 5.5/138

mole = 0.039

Approximately, the number of moles of 5.5grams of salicylic acid is 0.04moles. This is in accordance with the mole value (0.04) given in this question.