Answer:
Explanation:
Of course because it's Newton's Law that if body A exerts force on body B, then body B will exert equal but opposite force on body A.
HAPPY LEARNING:)
The first charged object is exerting a force on the second charged object. The second charged object necessarily exerting a force on the first is correct.
What is force?A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
Newton's third law states that for every action (force) in nature there is an equal and opposite reaction, from that we can understand when force is exerted on first charged object is exerting a force on the second charged object. The second charged object necessarily exerting a force on the first.
The first charged object is exerting a force on the second charged object. The second charged object necessarily exerting a force on the first is correct.
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ2
What is needed to Run A Brushless DC motor
Two connection methods are used for brushless DC motors. One method is to connect the coils in a loop as we compared it with the rotor winding of DC motors in Fig. 2.27. This method is called a Δ (delta) connection.
CORRECT ME IF IM WRONG!!
#CARRYONLEARNING>>> JAZMINE
Phát biểu nào sau đây là SAI?
A. Cường độ điện trường là đại lượng
đặc trưng cho điện trường về phương
diện tác dụng lực.
B. Điện trường tĩnh là điện trường có
cường độ E không đổi tại mọi điểm.
C. Đơn vị đo cường độ điện trường là
vôn trên mét (V/m).
D. Trong môi trường đẳng hướng,
cường độ điện trường giảm lần so với
trong chân không
Answer:
B.
Explanation:
sana makatulong sayo
The coefficent of static friction between the floor of a truck and a box resting on it is 0.38. The truck is traveling at 87.9 km/hr. What is the least distance in which the truck can stop and ensure that the box does not slide?
Answer:
[tex]d=79.9m[/tex]
Explanation:
From the question we are told that:
coefficient of static friction [tex]\mu=0.38[/tex]
Velocity [tex]v=87.9=>24.41667m/s[/tex]
Generally the equation for Conservation of energy is mathematically given by
[tex]\mu*mgd = 0.5 m v^2[/tex]
[tex]d=\frac{0.5*24.42^2}{0.38*9.8}[/tex]
[tex]d=79.9m[/tex]
If we use 1 millimeter to represent 1 light-year, how large in diameter is the Milky Way Galaxy?
Answer:
if 1 light year was one millimeter then 105,700 light years = 105,700 mm, (or 105.7 meters in case you needed to simplify or something)
A car is travelling at a speed of 30m/s on a straight road. what would be the speed of the car in km
Answer:
[tex] = \frac{30 \times {10}^{ - 3} }{1} \\ = 0.03 \: km \: per \: second[/tex]
Answer:
108 km/hr or 0.03 km/s
Explanation:
conversion factor for m/s to km/hr is 5/18
conversion factor for m/s to km/s is 1/1000
please helpp!
convert 1N into dyne
In the given relation F=ma a stands for write there SI unit
Answer:
a. 1 Newton = 100000 Dyne
b. a represents acceleration.
Explanation:
Newton is the standard unit (S.I) of measurement of force. Converting 1 Newton to dyne we have;
1 Newton = 10⁵ Dyne
1 Newton = 100000 Dyne
Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.
Mathematically, it is given by the formula;
Force = mass * acceleration
[tex] F = ma[/tex]
Hence, we can deduce that a represents the acceleration of an object and it's measured in meters per seconds square.
What is the "best" explanation for why the universe is the way it is?
A) god created the universe
B) there is a multiverse and this one happens to be perfect for life.
C) this is the only universe and it happens to be perfect for life.
D) It is all in illusion and none of it exists.
E) none of the above, they are all just guesses.
I know the answer I just wanna see what you guys think.
i will give brainly if you get it right.
In which states of matter will a substance have a fixed volume?
O A. Liquid and solid
O B. Solid and gas
O C. Plasma and gas
O D. Liquid and gas
Answer:
A. liquid and solid
Explanation:
Determine the minimum horizontal force P required to hold the crate from sliding down the plane. The crate has a mass of 50 kg and the coefficient of static friction between the crate and the plane is . ms
Answer: hello some data related to your question is missing attached below is the missing data and diagram related to the solution
answer:
P = 141.21 N
Explanation:
Given data:
Mass of crate = 50 kg
coefficient of static friction ( μ ) = 0.25
Calculate minimum horizontal force ( P ) that holds the crate from sliding
∑fx = 0
= P + Fcos θ - N*sinθ = 0
= P + 0.25N cos 30° - Nsin30° = 0
∴ P = 0.2835 N = 0
P - 0.2853 N = 0 ------- ( 1 )
∑fy = 0
- 50g + Ncosθ + Fsinθ
- 50*9.81 + Ncos30° + 0.25Nsin30°
∴ N = 494.942 N ----- ( 2 )
input 2 into 1
P - 0.2853 ( 494.942 ) = 0
P = 141.21 N
A 97.6-kg baseball player slides into second base. The coefficient of kinetic friction between the player and the ground is μk = 0.555.
(a) What is the magnitude of the frictional force?
(b) If the player comes to rest after 1.22 s, what is his initial speed?
Answer:
[tex]v=6.65m/sec[/tex]
Explanation:
From the Question we are told that:
Mass [tex]m=97.6[/tex]
Coefficient of kinetic friction [tex]\mu k=0.555[/tex]
Generally the equation for Frictional force is mathematically given by
[tex]F=\mu mg[/tex]
[tex]F=0.555*97.6*9.8[/tex]
[tex]F=531.388N[/tex]
Generally the Newton's equation for Acceleration due to Friction force is mathematically given by
[tex]a_f=-\mu g[/tex]
[tex]a_f=-0.555 *9.81[/tex]
[tex]a_f=-54455m/sec^2[/tex]
Therefore
[tex]v=u-at[/tex]
[tex]v=0+5.45*1.22[/tex]
[tex]v=6.65m/sec[/tex]
A scooter is accelerated from rest at the rate of 8m/s
. How long will it take to cover
a distance of 32m?
Explanation:
time=Distance/speed
t=32/8
t=4 seconds
Consider the heaviest box of 150 lb that you can push at constant speed across a level floor, where the coefficient of kinetic friction is 0.45, and estimate the maximum horizontal force that you can apply to the box. A box sits on a ramp that is inclined at an angle of 60.0° above the horizontal. The coefficient of kinetic friction between the box and the ramp is 0.45.
If you apply the same magnitude force, now parallel to the ramp, that you applied to the box on the floor, what is the heaviest box (in pounds) that you can push up the ramp at constant speed? (In both cases assume you can give enough extra push to get the box started moving.)
Maximum horizontal force that can be applied on the box is 300.32 N.
Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.
What is meant by kinetic friction ?Kinetic friction is defined as the opposing force exerted by the surface on an object in contact with it, when there is relative motion between the two surfaces.
Here,
Mass of the box, m = 150 lb = 68.1 kg
Coefficient of kinetic friction, μ = 0.45
Maximum horizontal force that can be applied on the box is the kinetic frictional force. Frictional force,
F(k) = μmg
F(k) = 0.45 x 68.1 x 9.8
F(k) = 300.32 N
Now, the box sits on a ramp inclined at 60°
Coefficient of kinetic friction, μ = 0.45
The net force here acting on the box placed in the ramp is due to the kinetic frictional force and the weight of the box.
So,
Frictional force, F(k)' = μmgcosθ
F(k)' = 0.45 x M x 9.8 x cos 60
F(k)' = 2.2M
Weight of the box acting horizontally,
W = Mgsinθ
W = M x 9.8 x sin60
W = 8.5M
Therefore, net force,
Fn = W - F(k)'
Fn = 8.5M - 2.2M
Fn = 6.3M
The total force acting on the box is
F = F(k) - Fn
ma = 300.32 - 6.3M
Since, the box is moving with constant speed, the acceleration, a = 0
Therefore,
300.32 - 6.3M = 0
6.3M = 300.32
M = 300.32/6.3
M = 47.7 kg = 105.16 pound
Hence,
Maximum horizontal force that can be applied on the box is 300.32 N.
Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.
To learn more about kinetic friction, click:
https://brainly.com/question/29100737
#SPJ2
A train is moving at a constant
speed of 55.0 m/s. After 5.00
seconds, how far has the train
gone?
cara
(Units = m)
Answer:
Distance = speed * time
55*5
275 meters.
The train would have covered a distance of 275 m
What is distance ?
We can define distance as to how much ground an object has covered despite its starting or ending point.
Distance = speed * time
given
speed= 55 m/s
time = 5 sec
Distance = 55 * 5 = 275 m
The train would have covered a distance of 275 m
learn more about distance
https://brainly.com/question/15172156?referrer=searchResults
#SPJ2
A student solving a physics problem to find the unknown has applied physics principles and obtained the expression: μkmgcosθ=mgsinθ−ma, where g=9.80meter/second2, a=3.60meter/second2, θ=27.0∘, and m is not given. Which of the following represents a simplified expression for μk?A student solving a physics problem to find the unknown has applied physics principles and obtained the expression: , where , , , and is not given. Which of the following represents a simplified expression for ?tanθ− agTo avoid making mistakes, the expression should not be simplified until the numerical values are substituted.gsinθ−agcosθThe single equation has two unknowns and cannot be solved with the information given.
Solution :
Given expression :
[tex]$\mu_k$[/tex]mgcosθ = mgsinθ − ma
Here, g = 9.8 [tex]m/s^2[/tex] , a = 3.60 [tex]m/s^2[/tex] , θ = 27°
Therefore,
[tex]$\mu_k mg \cos \theta = mg \sin \theta - ma$[/tex]
[tex]$\mu_k mg \cos \theta = m(g \sin \theta - a)$[/tex]
[tex]$\mu_k g \cos \theta = (g \sin \theta - a)$[/tex]
[tex]$\mu_k =\frac{(g \sin \theta-a)}{g \cos \theta}$[/tex]
Mow calculating the coefficient of kinetic friction as follows :
[tex]$\mu_k=\frac{g \sin \theta-a}{g \cos \theta}$[/tex]
[tex]$\mu_k=\frac{9.8 \times \sin 27^\circ-3.60}{9.8 \times \cos 27^\circ}$[/tex]
[tex]$\mu_k=0.097$[/tex]
The first and second coils have the same length, and the third and fourth coils have the same length. They differ only in the cross-sectional area. According to theory, what should be the ratio of the resistance of the second coil to the first coil and the fourth coil to the third
Answer:
The ratio of the resistances of second coil to the first coil is the ratio of square of radius of the first coil to the square of radius of second coil.
And
The ratio of the resistances of fourth coil to the third coil is the ratio of square of radius of the third coil to the square of radius of fourth coil.
Explanation:
The resistance of the coil is directly proportional to the length of the coil and inversely proportional to the area of coil and hence inversely proportional to the square of radius of the coil.
So, the ratio of the resistances of second coil to the first coil is the ratio of square of radius of the first coil to the square of radius of second coil.
And
The ratio of the resistances of fourth coil to the third coil is the ratio of square of radius of the third coil to the square of radius of fourth coil.
A projectile of mass m is fired horizontally with an initial speed of v0 from a height of h above a flat, desert surface. Neglecting air friction, at the instant before the projectile hits the ground, find the following in terms of m, v0, h, and g : Are any of the answers changed if the initial angle is changed?
Complete question is;
A projectile of mass m is fired horizontally with an initial speed of v0 from a height of h above a flat, desert surface. Neglecting air friction, at the instant before the projectile hits the ground, find the following in terms of m, v0, h and g:
(a) the work done by the force of gravity on the projectile,
(b) the change in kinetic energy of the projectile since it was fired, and
(c) the final kinetic energy of the projectile.
(d) Are any of the answers changed if the initial angle is changed?
Answer:
A) W = mgh
B) ΔKE = mgh
C) K2 = mgh + ½mv_o²
D) No they wouldn't change
Explanation:
We are expressing in terms of m, v0, h, and g. They are;
m is mass
v0 is initial velocity
h is height of projectile fired
g is acceleration due to gravity
A) Now, the formula for workdone by force of gravity on projectile is;
W = F × h
Now, Force(F) can be expressed as mg since it is force of gravity.
Thus; W = mgh
Now, there is no mention of any angles of being fired because we are just told it was fired horizontally.
Therefore, even if the angle is changed, workdone will not change because the equation doesn't depend on the angle.
B) Change in kinetic energy is simply;
ΔKE = K2 - K1
Where K2 is final kinetic energy and K1 is initial kinetic energy.
However, from conservation of energy, we now that change in kinetic energy = change in potential energy.
Thus;
ΔKE = ΔPE
ΔPE = U2 - U1
U2 is final potential energy = mgh
U1 is initial potential energy = mg(0) = 0. 0 was used as h because at initial point no height had been covered.
Thus;
ΔKE = ΔPE = mgh
Again like a above, the change in kinetic energy will not change because the equation doesn't depend on the angle.
C) As seen in B above,
ΔKE = ΔPE
Thus;
½mv² - ½mv_o² = mgh
Where final kinetic energy, K2 = ½mv²
And initial kinetic energy = ½mv_o²
Thus;
K2 = mgh + ½mv_o²
Similar to a and B above, this will not change even if initial angle is changed
D) All of the answers wouldn't change because their equations don't depend on the angle.
The number 0.00325 × 10-8 cm can be expressed in millimeters as A) 3.25 × 10-11 mm. B) 3.25 × 10-10 mm. C) 3.25 × 10-12 mm. D) 3.25 × 10-9 mm.
Answer:
Option B. 3.25×10¯¹⁰ mm.
Explanation:
Measurement (cm) = 0.00325×10⁻⁸ cm
Measurement (mm) =?
The measurement in mm can be obtained as follow:
1 cm = 10 mm
Therefore,
0.00325×10⁻⁸ cm = 0.00325×10⁻⁸ cm × 10 mm / 1 cm
0.00325×10⁻⁸ cm = 3.25×10¯¹⁰ mm
Thus, 0.00325×10⁻⁸ cm is equivalent to 3.25×10¯¹⁰ mm.
The conversion from centimeter to millimeter of the number 0.00325*10^-8cm is 3.25*10^-10mm
The number given is in standard form and can be written as 3.25*10^-11 cm.
To convert this from centimeter to millimeter, we have to multiply this value by 10.
Conversion Units1 cm - 10mm100cm = 1m1000m = 1kmSo, let's 3.25*10^-11 by 10 and get our value in mm
[tex]3.25*10^-^1^1 * 10 = 3.25*10^-^1^0[/tex]
From the calculation above, we can see that option B is the right answer since it carries [tex]3.25*10^-^1^0mm[/tex]
Learn more about conversion of units here;
https://brainly.com/question/8426032
Planets closer to a star will have what type of average temperature
Answer:
Mercury - 800°F (430°C) during the day, -290°F (-180°C) at night. Venus - 880°F (471°C) Earth - 61°F (16°C) Mars - minus 20°F (-28°C)30-Jan-2018
Calculate the RMS voltage of the following waveforms with 10 V peak-to-peak:
a. Sine wave;
b. Square wave,
c. Triangle wave.
Calculate the period of a waveform with the frequency of:
a. 100 Hz,
b. 1 kHz,
c. 100 kHz.
Answer:
a) [tex]T=0.01s[/tex]
b) [tex]T=0.001s[/tex]
c) [tex]T=0.00001s[/tex]
Explanation:
From the question we are told that:
Given Frequencies
a. 100 Hz,
b. 1 kHz,
c. 100 kHz.
Generally the equation for Waveform Period is mathematically given by
[tex]T=\frac{1}{f}[/tex]
Therefore
a)
For
[tex]T=100 Hz[/tex]
[tex]T=\frac{1}{100}[/tex]
[tex]T=0.01s[/tex]
b)
For
[tex]F=1kHz[/tex]
[tex]T=\frac{1}{1000}[/tex]
[tex]T=0.001s[/tex]
c)
For
[tex]F=100kHz[/tex]
[tex]T=\frac{1}{100*100}[/tex]
[tex]T=0.00001s[/tex]
Charlotte throws a paper airplane into the air, and it lands on the ground. Which best explains why this is an example of projectile motion? The paper airplane’s motion is due to horizontal inertia and the vertical pull of gravity. A force other than gravity is acting on the paper airplane. The paper airplane’s motion can be described using only one dimension. A push and a pull are the primary forces acting on the paper airplane.
highschool physics, not college physics
Answer:
Answer:
A). The paper airplane’s motion is due to horizontal inertia and the vertical pull of gravity.
Explanation:
Edge.
Answer:
The motion of the paper airplane is best explained by horizontal inertia and vertical pull of gravity.
Explanation:
What is horizontal inertia and vertical pull of gravity?Inertia is the property by which the body wants to remain in its position unless any external for is applied. Here horizontal inertia is inertia of motion which is acting horizontally .
While vertical pull is due to the earth .
In a paper airplane , four forces act .these forces provide it flight.These forces are horizontal inertia , vertical pull downwards , lift by air and drag.Hence horizontal inertia and vertical pull best explain the projectile motion of paper airplane.
Also read it;
https://brainly.com/question/11049671
#SPJ2
Two identical ambulances with loud sirens are driving directly towards you at a speed of 40 mph. One ambulance is 2 blocks away and the other is 10 blocks away. Which of the following is true? [Note that pitch = frequency.]a) The siren from the closer ambulance sounds higher pitched to you.b) The siren from the farther ambulance sounds higher pitched to you.c) The pitch of the two sirens sounds the same to you.d) The siren from the farther ambulance sounds higher pitched, until the closer ambulance passes you.
Answer:
c) The pitch of the two sirens sounds the same to you
Explanation:
The pitch does not depend on the distance of the object from the observer.
As per the given data
pitch = frequency
Frequency = [tex]f_{0}[/tex] [tex]\frac{V +- V_{0}}{V +- V_{s}}[/tex]
[tex]f^{'}[/tex] = [tex]f_{0}[/tex] [tex]\frac{V }{V - V_{s}}[/tex]
Hence, the pitch of the two sirens remains the same for the observer.
Answer:
c) The pitch of the two sirens sounds the same to you
Explanation:
How fast much an 816kg Volkswagen travel to have the same momentum as (a) a 2650kg Cadillac going 16.0 km/h? (b) a 9080-kg truck also going 16.0 km/hr?
Answer:
Explanation:
From the given information:
the car's momentum = momentum of the truck
∴
(a) 816 kg × v = 2650 kg × 16.0 km/h
v = (2650 kg × 16.0 km/h) / 816 kg
v = 51.96 km/hr
(b) 816 kg × v = 9080 kg × 16.0 km/h
v = (9080 kg × 16.0 km/h) / 816 kg
v = 178.04 km/hr
The human ear can respond to an extremely large range of intensities - the quietest sound the ear can hear is smaller than 10-20 times the threshold which causes damage after brief exposure. If you could measure distances over the same range with a single instrument, and the smallest distance you could measure was 1 mm, what would the largest be, in kilometers?
Answer:
the largest distance we can measure is 10¹⁴ km
Explanation:
Given the data in the question;
Threshold hearing = 10⁻²⁰
smallest distance measured = 1 mm
Largest distance measured will be;
⇒ ( threshold hearing )⁻¹ × smallest distance
= ( 1 / 10⁻²⁰ ) × 1 mm
= 10²⁰ × 1mm
= 10²⁰ mm
we know that; 1000 mm = 10⁶ km
Largest distance = ( 10²⁰ / 10⁶ ) km
= 10¹⁴ km
Therefore, the largest distance we can measure is 10¹⁴ km
a 50kg skater on level ice, has built up her speed to 30km/h. how far will she coast before sliding friction dissipates her energy?
Answer:
belpw
Explanation:
The distance prior to the sliding friction dispersing her energy would be:
- The distance will remain unaffected by the sliding friction i.e. 354m
As we know, When Sliding friction dissolves her energy, leading her Kinetic Energy to turn 0 on coming to the state of rest. So,
[tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex] (∵ Work in -ve denotes it is done opposite to friction)
Given that,
m(mass) [tex]= 50 kg[/tex]
v(velocity) [tex]= 30 km/hr[/tex] or [tex]8.33 m/s[/tex]
The coefficient of Kinetic Friction [tex]= 0.01[/tex]
g(gravitational force) [tex]= 9.8 m/s^2[/tex]
Initial Velocity(u) [tex]= 30[/tex] × [tex]1000/3600 m/s[/tex]
[tex]= 8.33 m/s[/tex]
Now by employing the provided values,
[tex]F =[/tex] μ[tex]mg[/tex]
[tex]= (0.01) (50) (9.8)[/tex]
[tex]= 4.9[/tex]
∵ [tex]F = 4.9 N[/tex]
By using the above expression, we will find the distance;
[tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex]
⇒ [tex]1/2 (50) (0)^2 - 1/2 (50) (8.33)^2 = -4.9(S)[/tex]
⇒ [tex]1734.7225 = 4.9S[/tex]
⇒ [tex]S = 1734.7225/4.9[/tex]
∵ [tex]S = 354 m[/tex]
Because [tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex] [tex]= -[/tex] μmgS
⇒ [tex]S = (u^2 - v^2)[/tex]/2μ[tex]g[/tex]
Thus, the distance will remain unaffected by the sliding friction i.e. 354m
Learn more about "Friction" here:
brainly.com/question/2122951
a soap bubble was slowly enlarged from radius 4cm to 6cm and amount of work necessary for enlargement is 1.5 *10 calculate the surface tension of soap bubble joules
Answer:
The surface tension is 190.2 N/m.
Explanation:
Initial radius, r = 4 cm
final radius, r' = 6 cm
Work doen, W = 15 J
Let the surface tension is T.
The work done is given by
W = Surface Tension x change in surface area
[tex]15 = T \times 4\pi^2(r'^2 - r^2)\\\\15 = T \times 4 \times 3.14\times 3.14 (0.06^2- 0.04^2)\\\\15 = T\times 0.0788\\\\T = 190.2 N/m[/tex]
Use a variation model to solve for the unknown value. Use as the constant of variation. The stopping distance of a car is directly proportional to the square of the speed of the car. (a) If a car travelling has a stopping distance of , find the stopping distance of a car that is travelling . (b) If it takes for a car to stop, how fast was it travelling before the brakes were applied
Complete question is;
Use a variation model to solve for the unknown value.
The stopping distance of a car is directly proportional to the square of the speed of the car.
a. If a car traveling 50 mph has a stopping distance of 170 ft, find the stopping distance of a car that is traveling 70 mph.
b. If it takes 244.8 ft for a car to stop, how fast was it traveling before the brakes were applied?
Answer:
A) d = 333.2 ft
B) 60 mph
Explanation:
Let the stopping distance be d
Let the speed of the car be v
We are told that the stopping distance is directly proportional to the square of the speed of the car. Thus;
d ∝ v²
Therefore, d = kv²
Where k is constant of variation.
A) Speed is 50 mph and stopping distance of 170 ft.
v = 50 mph
d = 170 ft = 0.032197 miles
Thus,from d = kv², we have;
0.032197 = k(50²)
0.032197 = 2500k
k = 0.032197/2500
k = 0.0000128788
If the car is now travelling at 70 mph, then;
d = 0.0000128788 × 70²
d = 0.06310612 miles
Converting to ft gives;
d = 333.2 ft
B) stopping distance is now 244.8 ft
Converting to miles = 0.046363636 miles
Thus from d = kv², we have;
0.046363636 = 0.0000128788(v²)
v² = 0.046363636/0.0000128788
v² = 3599.99658
v = √3599.99658
v ≈ 60 mph
4. Water stands 12.0 m deep in a storage tank whose top is open to the atmosphere at
1.00 atm. The density of water is given as 1000 kg/m² and some pressure conversion
are 1 Pa = 1 N/m² while 1 atm = 101 325 Pa.
a) What is the absolute pressure at the bottom of the tank?
b) What is the gauge pressure at the bottom of the tank?
[4]
[4]
Answer:
[tex]P=217600Pa[/tex]
Explanation:
From the question we are told that:
Density [tex]\rho=1000kg/m^3[/tex]
Depth of Water [tex]d=12.0m[/tex]
Generally the equation for Pressure is mathematically given by
[tex]P=\rho gh[/tex]
[tex]P=1000*9.8*12[/tex]
[tex]P=117600N/m^2[/tex]
Therefore
Absolute Pressure=P+P'
Where
P=Pressure under water
P'=Atmospheric Pressure
Therefore
[tex]P_A=P+P'[/tex]
[tex]P_A=117,600+10^5[/tex]
[tex]P=217600Pa[/tex]
Explain how the Laws of planetary motion and Newton’s laws allow the hotel to keep moving in space.
Answer:
Explanation:
i am sorry i needed points
A 17-kg sled is being pulled along the horizontal snow-covered ground by a horizontal force of 33 N. Starting from rest, the sled attains a speed of 1.6 m/s in 9.8 m. Find the coefficient of kinetic friction between the runners of the sled and the snow.
Answer:
[tex]\mu=0.185[/tex]
Explanation:
From the question we are told that:
Mass [tex]m=17kg[/tex]
Force [tex]F=33N[/tex]
Velocity [tex]v=1.6m/s[/tex]
Distance [tex]d= 9.8m[/tex]
Generally the equation for Work done is mathematically given by
[tex]W=\triangle K.E+\triangle P.E[/tex]
Where
[tex]\triangle K.E=(F-F_f)*2[/tex]
[tex]F_f=F+\frac{\triangle K.E}{d}[/tex]
[tex]F_f=33+\frac{0.5*17*1.6^2}{9.8}[/tex]
[tex]F_f=30.8N[/tex]
Since
[tex]f = \mu*m*g[/tex]
[tex]\mu= 30.8/(m*g)[/tex]
[tex]\mu= 30.8/(17*9.81)[/tex]
[tex]\mu=0.185[/tex]
a motor car reaches a velocity of 15m/s in 6s from rest on a perfect test track . what is the average acceleration
Answer:
[tex]{ \tt{initial \: velocity, \: u = 0}} \: (at \: rest) \\ { \tt{final \: velocity, \: v = 15 { {ms}^{ - 1} }}} \\ { \tt{time, \: t = 6s}} \\ { \bf{from \: first \: newtons \: equation \: of \: motion : }} \\ { \bf{v = u + at}} \\ { \tt{15 = 0 + (a \times 6)}} \\ { \tt{6a = 15}} \\ { \tt{acceleration, \: a = 2.5 \: {ms}^{ - 2} }}[/tex]
