The following equation is an example of
decay.
181
185
79
Au →
4
2
He+

Answer:

a. to the west.

Explanation:

An electron in a magnetic field always experience a force that tends to change its direction of motion through the magnetic field. According to Lorentz left hand rule (which is the opposite of Lorentz right hand rule for a positive charge), the left hand is used to represent the motion of an electron in a magnetic field. Hold out the left hand with the fingers held out parallel to the palm, and the thumb held at right angle to the other fingers. If the thumb represents the motion of the electron though the field, and the other fingers represent the direction of the field, then the palm will push in the direction of the force on the particle.

In this case, if we point the thumb (which shows the direction we shot the electron) to the south (towards your body), with the palm (shows the direction of the force) facing up to the roof, then the fingers (the direction of the field) will point west.

Answer:

W = 122.3 J

Explanation:

First, we need to find out the force applied to the smaller piston. We know that the pressure applied to smaller piston must be equally transmitted to the larger piston. Therefore,

P₁ = P₂

F₁/A₁ = F₂/A₂

F₂ = F₁(A₂/A₁)

where,

F₁ = Force of Larger Piston = Weight of car = mg = (1500 kg)(9.8 m/s²)

F₁ = 14700 N

F₂ = Force applied to smaller piston = ?

A₁ = Area of larger piston = πd₁²/4

A₂ = Area of smaller piston = πd₂²/4

Therefore,

F₂ = (14700 N)[(πd₂²/4)/(πd₁²/4)]

F₂ = (14700 N)(d₂²/d₁²)

where,

d₁ = diameter of large piston = 50 cm

d₂ = diameter of small piston = 4 cm

Therefore,

F₂ = (14700 N)[(4 cm)²/(50 cm)²]

F₂ = 94.08 N

Now, for the work done on the car:

Work Done = W = F₂ d

where,

d = displacement of car = 1.3 m

Therefore,

W = (94.08 N)(1.3 m)

W = 122.3 J

Answer:

8 seconds

160 meters

Explanation:

Given in the y direction:

Δy = 0 m

v₀ = 40 m/s

a = -10 m/s²

Find: t

Δy = v₀ t + ½ at²

0 m = (40 m/s) t + ½ (-10 m/s²) t²

0 = 40t − 5t²

0 = 5t (8 − t)

t = 0 or 8

Given in the x direction:

v₀ = 20 m/s

a = 0 m/s²

t = 8 s

Find: Δx

Δx = v₀ t + ½ at²

Δx = (20 m/s) (8 s) + ½ (0 m/s²) (8 s)²

Δx = 160 m

Answer:

787528.7 J

Explanation:

Work done: This can be defined as the product of force and distance along the direction of force. The S.I unit of work is Joules (J).

From the question,

W = Tcos∅(d)............. Equation 1

Where W = work done, T = tension in the rope, ∅ = the angle of the rope to the horizontal, d = distance.

But,

d = v(t)..................... equation 2

Where v = velocity, t = time

Substitute equation 2 into equation 1

W = Tcos∅(vt)............. Equation 3

Given: T = 210 N, ∅ = 23°, v = 7 km/h = 1.94 m/s, t = 35 min = 2100 s

Substitute into equation 3

W = 210(cos23°)(1.94×2100)

W = 787528.7 J

Answer:

a) The magnitude of the friction force is 55.851 newtons, b) The speed of the crate when it reaches the bottom of the ramp is 2.526 meters per second.

Explanation:

a) This situation can be modelled by the Principle of Energy Conservation and the Work-Energy Theorem, where friction represents the only non-conservative force exerting on the crate in motion. Let consider the bottom of the straight ramp as the zero point. The energy equation for the crate is:

[tex]U_{g,1}+K_{1} = U_{g,2}+K_{2}+ W_{fr}[/tex]

Where:

[tex]U_{g,1}[/tex], [tex]U_{g,2}[/tex] - Initial and final gravitational potential energy, measured in joules.

[tex]K_{1}[/tex], [tex]K_{2}[/tex] - Initial and final translational kinetic energy, measured in joules.

[tex]W_{fr}[/tex] - Work losses due to friction, measured in joules.

By applying the defintions of translational kinetic and gravitational potential energies and work, this expression is now expanded:

[tex]m\cdot g \cdot y_{1} + \frac{1}{2}\cdot m\cdot v_{1}^{2} = m\cdot g \cdot y_{2} + \frac{1}{2}\cdot m\cdot v_{2}^{2} + \mu_{k}\cdot m \cdot g \cdot \cos \theta[/tex]

Where:

[tex]m[/tex] - Mass of the crate, measured in kilograms.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]y_{1}[/tex], [tex]y_{2}[/tex] - Initial and final height of the crate, measured in meters.

[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Initial and final speeds of the crate, measured in meters per second.

[tex]\mu_{k}[/tex] - Kinetic coefficient of friction, dimensionless.

[tex]\theta[/tex] - Ramp inclination, measured in sexagesimal degrees.

The equation is now simplified and the coefficient of friction is consequently cleared:

[tex]y_{1}-y_{2}+\frac{1}{2\cdot g}\cdot (v_{1}^{2}-v_{2}^{2}) = \mu_{k}\cdot \cos \theta[/tex]

[tex]\mu_{k} = \frac{1}{\cos \theta} \cdot \left[y_{1}-y_{2}+\frac{1}{2\cdot g}\cdot (v_{1}^{2}-v_{2}^{2}) \right][/tex]

The final height of the crate is:

[tex]y_{2} = (1.6\,m)\cdot \sin 30^{\circ}[/tex]

[tex]y_{2} = 0.8\,m[/tex]

If [tex]\theta = 30^{\circ}[/tex], [tex]y_{1} = 0\,m[/tex], [tex]y_{2} = 0.8\,m[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]v_{1} = 5\,\frac{m}{s}[/tex] and [tex]v_{2} = 0\,\frac{m}{s}[/tex], the coefficient of friction is:

[tex]\mu_{k} = \frac{1}{\cos 30^{\circ}}\cdot \left\{0\,m-0.8\,m+\frac{1}{2\cdot \left(9.807\,\frac{m}{s^{2}} \right)}\cdot \left[\left(5\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}\right] \right\}[/tex]

[tex]\mu_{k} \approx 0.548[/tex]

Then, the magnitude of the friction force is:

[tex]f =\mu_{k}\cdot m\cdot g \cdot \cos \theta[/tex]

If [tex]\mu_{k} \approx 0.548[/tex], [tex]m = 12\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]\theta = 30^{\circ}[/tex], the magnitude of the force of friction is:

[tex]f = (0.548)\cdot (12\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot \cos 30^{\circ}[/tex]

[tex]f = 55.851\,N[/tex]

The magnitude of the force of friction is 55.851 newtons.

b) The energy equation of the situation is:

[tex]m\cdot g \cdot y_{1} + \frac{1}{2}\cdot m\cdot v_{1}^{2} = m\cdot g \cdot y_{2} + \frac{1}{2}\cdot m\cdot v_{2}^{2} + \mu_{k}\cdot m \cdot g \cdot \cos \theta[/tex]

[tex]y_{1}+\frac{1}{2\cdot g}\cdot v_{1}^{2} =y_{2} + \frac{1}{2\cdot g}\cdot v_{2}^{2} + \mu_{k}\cdot \cos \theta[/tex]

Now, the final speed is cleared:

[tex]y_{1}-y_{2}+ \frac{1}{2\cdot g}\cdot v_{1}^{2} -\mu_{k}\cdot \cos \theta= \frac{1}{2\cdot g}\cdot v_{2}^{2}[/tex]

[tex]2\cdot g \cdot (y_{1}-y_{2}-\mu_{k}\cdot \cos \theta) + v_{1}^{2} = v_{2}^{2}[/tex]

[tex]v_{2} = \sqrt{2\cdot g \cdot (y_{1}-y_{2}-\mu_{k}\cdot \cos \theta)+v_{1}^{2}}[/tex]

Given that [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]y_{1} = 0.8\,m[/tex], [tex]y_{2} = 0\,m[/tex], [tex]\mu_{k} \approx 0.548[/tex], [tex]\theta = 30^{\circ}[/tex] and [tex]v_{1} = 0\,\frac{m}{s}[/tex], the speed of the crate at the bottom of the ramp is:

[tex]v_{2}=\sqrt{2\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot [0.8\,m-0\,m-(0.548)\cdot \cos 30^{\circ}]+\left(0\,\frac{m}{s} \right)^{2}}[/tex]

[tex]v_{2}\approx 2.526\,\frac{m}{s}[/tex]

The speed of the crate when it reaches the bottom of the ramp is 2.526 meters per second.

Answer:

Matter's resistance to a change in motion is called INERTIA and is directly proportional to the mass of an object.

Explanation:

Answer:

In an electromagnetic wave in free space, the ratio of the magnitudes of electric and magnetic field vectors E and B is equal:  speed of light(c)

Explanation:

Generally the ratio of the E(electric field ) and  the B(magnetic field ) is  equal to the speed of the electromagnetic wave i.e the speed of  light (c) the value is

    [tex]c = 3.0 *10^{8} \ m/s[/tex]

Answer:

[tex] \boxed{\sf Kinetic \ energy \ (KE) = 85 \ J} [/tex]

Given:

Mass (m) = 6.8 kg

Speed (v) = 5.0 m/s

To Find:

Kinetic energy (KE)

Explanation:

Formula:

[tex] \boxed{ \bold{\sf KE = \frac{1}{2} m {v}^{2} }}[/tex]

Substituting values of m & v in the equation:

[tex] \sf \implies KE = \frac{1}{2} \times 6.8 \times {5}^{2} [/tex]

[tex] \sf \implies KE = \frac{1}{ \cancel{2}} \times \cancel{2} \times 3.4 \times 25 [/tex]

[tex] \sf \implies KE =3.4 \times 25 [/tex]

[tex] \sf \implies KE = 85 \: J[/tex]

The kinetic energy of the object reported to two significant figures is: 85 Joules.

Given the following data:

To find the kinetic energy of the object:

Kinetic energy refers to an energy that is possessed by a physical object or body due to its motion.

Mathematically, kinetic energy is calculated by using the formula;

[tex]K.E = \frac{1}{2} MV^2[/tex]

Where:

Substituting the parameters into the formula, we have;

[tex]K.E = \frac{1}{2}[/tex] × [tex]6.8[/tex] × [tex]5^2[/tex]

[tex]K.E = 3.4[/tex] × [tex]25[/tex]

Kinetic energy = 85 Joules.

Therefore, the kinetic energy of the object is 85 Joules.

Read more: https://brainly.com/question/23153766

Answer:

Explanation:

Carbohydrates are known as energy giving foods and they are contained in our diets no matter how small. Other components of foods are protein, fat and oil, vitamin, water etc. A calorie is a unit of energy. It tells us the amount of energy the weight of any food contains. Knowing the amount of calories of food we are taking in helps us to monitor our weight. Each component of food have their own calories depending on the weight of the food component.

For carbohydrate as a component of food, 1gram of carbohydrates contains 4 calories. With this conversion, we can therefore calculate the calories of carbohydrate we are taking in by taking the weight of the food we want to eat.

Hence, approximately 4 calories are in one gram of carbohydrates

One gram of carbohydrates contains approximately 4 calories.

The amount of energy in macronutrients, like carbohydrates, is measured in calories per gram. In terms of nutrition, a "calorie" is the amount of energy needed to warm up one gram of water by one degree Celsius.

Carbohydrates are one of the three main types of nutrients that our body needs, along with proteins and fats. They give the body fuel. When you eat carbohydrates, your body breaks them down into a type of sugar called glucose.  Cells in your body use this glucose for energy.

Read more about  carbohydrates here:

https://brainly.com/question/336775

#SPJ6

Answer:

A. 4.82 cm

B. 24.66 cm

Explanation:

The depth of water = 19.6 cm

Distance of fish  = 6.40 cm

Index of refraction of water = 1.33

(A). Now use the below formula to compute the apparent depth.

[tex]d_{app} = \frac{n_{air}}{n_{water}} \times d_{real} \\= \frac{1}{1.33} \times 6.40 \\= 4.82 cm.[/tex]

(B). the depth of the fish in the mirror.

[tex]d_{real} = 19.6 cm + (19.6 cm – 6.40 cm) = 32.8 cm[/tex]

Now find the depth of reflection of the fish in the bottom of the tank.

[tex]d_{app} = \frac{n_{air}}{n_{water}} \times d_{real} \\d_{app} = \frac{1}{1.33} \times 32.8 = 24.66\\[/tex]

Answer:infrared radiation

Explanation:

Infrared radiation and  microwave radiation  of the electromagnetic spectrum have longer wavelengths than visible light.

EM waves are another name for electromagnetic waves. When an electric field interacts with a magnetic field, electromagnetic waves are created. These electromagnetic waves make up electromagnetic radiations. It is also possible to say that electromagnetic waves are made up of magnetic and electric fields that are oscillating. The basic equations of electrodynamics, Maxwell's equations, have an answer in electromagnetic waves.

If we arrange   electromagnetic wave with decrease in wavelength, we get:

Radio waves > microwave >  Infrared >  Visible light > Ultraviolet > X-rays > Gamma radiation.

Hence,  Infrared  radiation and  microwave radiation  of the electromagnetic spectrum have longer wavelengths than visible light.

Learn more about electromagnetic wave here:

https://brainly.com/question/29774932

#SPJ5

Answer:

A. magnetic field

Explanation:

The magnetic field is produced around a wire when an electrical current is in the wire because of the magnetic effect of the electric current therefore the correct answer is option A .

A magnetic field could be understood as an area around a magnet, magnetic material, or an electric charge in which magnetic force is exerted.

As given in the problem statement we have to find out what is produced around a wire when an electrical current is in the wire.

The magnetic field is produced as a result when an electrical current is passed through the conducting wire .

Option A is the appropriate response because a wire's magnetic field is created when an electrical current flows through it due to the magnetic influence of the electric current .

Learn more about the magnetic fields here, refer to the link given below;

brainly.com/question/23096032

#SPJ6

Answer:   The volume of the block will be [tex]100cm^3[/tex]

Explanation:

Density is defined as the mass contained per unit volume.

[tex]Density=\frac{mass}{volume}[/tex]

Given : Mass of cube = 100 grams

Density of cube = [tex]1g/cm^3[/tex]

Putting in the values we get:

[tex]Volume=\frac{mass}{density}[/tex]

[tex]Volume=\frac{100g}{1g/cm^3}=100cm^3[/tex]

 Thus volume of the block will be [tex]100cm^3[/tex]

Answer:

0.367A = Current of both resistors

For resistor 1: 1.89W; For resistor 2: 11.3W

Explanation:

When the resistors are connected in series, the equivalent resistance is the sum of both resistors, that is:

R = 14.0Ω + 84.0Ω = 98.0Ω

Using Ohm's law, we can find the current of the circuit (Is the same for both resistors):

V = RI

V / R = I

36.0V / 98.0Ω = I

Power is defined as:

P = I²*R

For resistor 1:

P = 0.367A²*14.0Ω = 1.89W

For resistor 1:

P = 0.367A²*84.0Ω = 11.3W

Answer:

2960 N

Explanation:

Convert rev/min to rad/s:

150 rev/min × (2π rad/rev) × (1 min / 60 s) = 50π rad/s

Sum of forces in the centripetal direction:

∑F = ma

T = m v² / r

T = m ω² r

T = (0.2 kg) (50π rad/s)² (0.6 m)

T = 2960 N

Answer:

Both Ellen and Mary are correct.

Explanation:

Both are correct, it's just different ways of saying the same thing.

When the acceleration is always opposite in direction to the displacement, then, the acceleration is directly proportional to the displacement of an object from its equilibrium position

Answer:

A) the moment of inertia of the system decreases and the angular speed increases.

Explanation:

The complete question is

A merry-go-round spins freely when Diego moves quickly to the center along a radius of the  merry-go-round. As he does this, It is true to say that

A) the moment of inertia of the system decreases and the angular speed increases.

B) the moment of inertia of the system decreases and the angular speed decreases.

C) the moment of inertia of the system decreases and the angular speed remains the same.

D) the moment of inertia of the system increases and the angular speed increases.

E) the moment of inertia of the system increases and the angular speed decreases

In angular momentum conservation, the initial angular momentum of the system is conserved, and is equal to the final angular momentum of the system. The equation of this angular momentum conservation is given as

[tex]I_{1} w_{1} = I_{2} w_{2}[/tex]    ....1

where [tex]I_{1}[/tex] and [tex]I_{2}[/tex] are the initial and final moment of inertia respectively.

and [tex]w_{1}[/tex] and [tex]w_{2}[/tex] are the initial and final angular speed respectively.

Also, we know that the moment of inertia of a rotating body is given as

[tex]I = mr^{2}[/tex]    ....2

where [tex]m[/tex] is the mass of the rotating body,

and [tex]r[/tex] is the radius of the rotating body from its center.

We can see from equation 2 that decreasing the radius of rotation of the body will decrease the moment of inertia of the body.

From equation 1, we see that in order for the angular momentum to be conserved, the decrease from [tex]I_{1}[/tex] to [tex]I_{2}[/tex] will cause the angular speed of the system to increase from [tex]w_{1}[/tex] to [tex]w_{2}[/tex] .

From this we can clearly see that reducing the radius of rotation will decrease the moment of inertia, and increase the angular speed.

Answer:

-50N

Explanation:

F=ma=m(Vf-Vi)/t

F=(10)(-10)/(2)=-50N

So the force acting on the block is -50N, where the negative sign simply tells us that the force is opposite to the direction of movement.

Answer:

metal conducts heat better than wood.

Explanation:

Metals are generally good conductors of heat, and they usually conduct heat at a relatively rapid rate. Inside the room with a uniform temperature, a metal when touched will rapidly conduct the heat from your hand, leaving your hand with a cooler feeling. Wood on the other hand is a poor heat conductor, so the heat is not conducted from your hand fast enough to cool it up to the point that your hand feels cool.

Answer:

a)  t = 2 10⁻² s ,  t = 2.4 10-1 s

Explanation:

In this exercise they indicate the delay in two signals

a) A signal travels on an electrical cable, between New York and London.

The wave formed in this wire for the signal. This wave travels at the speed of light, c = 3 108 m / s, so the delay is very small

                t = d / c

               t = 6000 10³/3 10⁸

               t = 2 10⁻² s

b) The signal points to a satellite in geostationary orbit

                   distance traveled = √ (2 36000 10³)² + 6000²

                  distance = 72 10⁶ m

the waiting time is

                t = d / c

                t = 72 10⁶/3 10⁸

               t = 2.4 10-1 s

    we can see that the signal sent by the satellites has more delay because its distance is much greater

Answer:

a)  Em = Pe = 4.9 10⁴ J,  b)   K = 2.05 10⁴ J , c)     K = 3.92  104 J ,

e)  W_ friction = Em = 4.9 10⁴ J  

Explanation:

The skier goes down the slope if we assume that there is no friction, the mechanical energy is conserved

         Em = PE + K

where the potential energy is

         PE = m g h

the kinetic energy is

         K = ½ m v²

Let's write the mechanical energy at various points

a) Point A. It is the highest point of the entire system and as the skier is leaving his speed is zero

           Em = Pe

           Em = m g h

let's calculate

           Em = 50 9.8 100

           Em = 4.9 10⁴ J

b) Point B. This point is 60 m

          Em = Pe + K

          K = Em - Pe

          K = 4.9 10⁴ - m g h_B

          K = 4.9   10⁴ - 5 9.8 60

          K = 4.9 10⁴ - 2.85 10⁴

          K = 2.05 10⁴ J

c) point c. This point is 20 m

          Em = Pe + K

          K = Em -Pe = 4.9 10⁴ J - m g h_c

          K = 4.9 10⁴ - 50 9.8 20  = 4.9 10⁴ -  9800

          K = 3.92  104 J

d) point d. It is at a height of 60 m

           Em = Pe + K

           K = Em -Pe

           K = 4.9 10⁴ - m g h

           K = 4.9 10⁴ - 50 9.8 60 =4.9 104 - 2.94 10⁻⁴

           K = 4.897 104 J

e) point E. In this part they indicate that the body is stopped, therefore in this flat part it must be friction so that a device work is carried out that makes the understanding transform into heat by friction and the system stops

            W_ friction = Em = 4.9 10⁴ J

Answer:

[tex]\Delta \theta = 3116.11\,rad[/tex] and [tex]\Delta \theta = 495.944\,rev[/tex]

Explanation:

The tub rotates at constant speed and the kinematic formula to describe the change in angular displacement ([tex]\Delta \theta[/tex]), measured in radians, is:

[tex]\Delta \theta = \omega \cdot \Delta t[/tex]

Where:

[tex]\omega[/tex] - Steady angular speed, measured in radians per second.

[tex]\Delta t[/tex] - Time, measured in seconds.

If [tex]\omega = 31.7\,\frac{rad}{s}[/tex] and [tex]\Delta t = 98.3\,s[/tex], then:

[tex]\Delta \theta = \left(31.7\,\frac{rad}{s} \right)\cdot (98.3\,s)[/tex]

[tex]\Delta \theta = 3116.11\,rad[/tex]

The change in angular displacement, measured in revolutions, is given by the following expression:

[tex]\Delta \theta = (3116.11\,rad)\cdot \left(\frac{1}{2\pi} \frac{rev}{rad} \right)[/tex]

[tex]\Delta \theta = 495.944\,rev[/tex]

Answer:

A. 110Hz,220Hz, 330 Hz

Explanation:

for organ open at open both ends;

the length of the organ for the fundamental frequency, L = A---->N + N----->A

A---->N  = λ /4 and N----->A = λ /4

L = λ /4 + λ /4 = λ /2

[tex]L = \frac{\lambda}{2} \\\\\lambda = 2L[/tex]

λ  = 2 x 1.5m = 3.0 m

Wave equation is given by;

V = Fλ

Where;

V is the speed of sound

F is the frequency of the wave

F = V/ λ

F₀ = V / 2L

Where;

F₀  is the fundamental frequency

F₀ = 330 / 2(1.5)

F₀ = 330 / 3

F₀ = 110 Hz

the length of the organ for the first overtone, L = A---->N + N----->A + A----->N +  N----->A

L = 4λ /4

L = λ

λ = 1.5 m

F₁ = 330 / 1.5

F₁ = 220 Hz

Thus, F₁ = 2F₀

For open organ at one end

the length of the organ for the fundamental frequency, L = N------A

L = λ /4

λ = 4L

F₀ = V/4L

F₀ = 330 / (4 x 0.75)

F₀ = 110 Hz

the length of the organ for the first overtone, L = N-----N + N-----A

L = λ/2 + λ / 4

L = 3λ /4

F₁ = 3F₀

F₁ = 3 x 110

F₁ = 330 Hz

Thus the fundamental frequency for both organs is 110 Hz,

The first overtone for the organ open at both ends is 220 Hz

The first overtone for the organ open at one end is 330 Hz

The correct option is "A. 110Hz,220Hz, 330 Hz"

The correct option is option (A)

the frequencies produced by the pipes are (A) 110Hz,220Hz, 330 Hz

(I) For an organ pipe open at open both ends the frequency of different modes is given by:

F =  nv/2L

where

F is the frequency

L is the length of the organ pipe

v is the speed of the wave

and, n is the mode of frequency

the fundamental frequency corresponds to n = 1, given by:

F₀ = v/2L

F₀ = 330 / 2(1.5)

F₀ = 330 / 3

F₀ = 110 Hz

The first overtone corresponds to n = 2, the second overtone corresponds to n = 3, and so on...

F₁ =2v/2L

F₁ = 330 / 1.5

F₁ = 220 Hz

Thus, F₁ = 2F₀

The difference between successive overtones is F₀

(II) For an organ pipe open at one end the frequency of different modes is given by:

F =  nv/4L

where

F is the frequency

L is the length of the organ pipe

v is the speed of the wave

and, n is the mode of frequency

the fundamental frequency corresponds to n = 1, given by:

F₀ = V/4L

F₀ = 330 / (4 x 0.75)

F₀ = 110 Hz

For an organ pipe open at one end, only those overtones are present which correspond to odd n, that is n = 3,5,...so:

F₁ = 3F₀

F₁ = 3 x 110

F₁ = 330 Hz

Learn more about overtones:

https://brainly.com/question/1515875?referrer=searchResults

Answer:

(B) a whole number of wavelengths.

Explanation:

Two beams of coherent light start out at the same point in phase and travel different paths to arrive at point P. If the maximum destructive interference is to occur at point P, the two beams must travel paths that differ by a whole number of wavelengths.

When the resultant effect of the combination of two identical waves result in their annihilation or complete cancellation of the effect of each other, destructive interference takes place. Hence to have two wave sources producing waves that have the same frequency wavelength and amplitude and which are always in phase with each other or have a constant phase difference are said to be Coherent source

Answer: Speed = [tex]3.10^{-31}[/tex] m/s

Explanation: Like in classical physics, when external net force is zero, relativistic momentum is conserved, i.e.:

[tex]p_{f} = p_{i}[/tex]

Relativistic momentum is calculated as:

p = [tex]\frac{mu}{\sqrt{1-\frac{u^{2}}{c^{2}} } }[/tex]

where:

m is rest mass

u is velocity relative to an observer

c is light speed, which is constant (c=[tex]3.10^{8}[/tex]m/s)

Initial momentum is zero, then:

[tex]p_{f}[/tex] = 0

[tex]p_{1}-p_{2}[/tex] = 0

[tex]p_{1} = p_{2}[/tex]

To find speed of the heavier fragment:

[tex]\frac{mu_{1}}{\sqrt{1-\frac{u^{2}_{1}}{c^{2}} } }=\frac{mu_{2}}{\sqrt{1-\frac{u^{2}_{2}}{c^{2}} } }[/tex]

[tex]\frac{1.86.10^{-27}u_{1}}{\sqrt{1-\frac{u^{2}_{1}}{(3.10^{8})^{2}} } }=\frac{3.10^{-28}.0.844.3.10^{8}}{\sqrt{1-\frac{(0.844c)^{2}}{c^{2}} } }[/tex]

[tex]\frac{1.86.10^{-27}u_{1}}{\sqrt{1-\frac{u^{2}_{1}}{(3.10^{8})^{2}} } }=1.42.10^{-19}[/tex]

[tex]1.86.10^{-27}u_{1} = 1.42.10^{-19}.{\sqrt{1-\frac{u^{2}_{1}}{(3.10^{8})^{2}} } }[/tex]

[tex](1.86.10^{-27}u_{1})^{2} = (1.42.10^{-19}.{\sqrt{1-\frac{u^{2}_{1}}{(3.10^{8})^{2}} } })^{2}[/tex]

[tex]3.46.10^{-54}.u_{1}^{2} = 2.02.10^{-38}.(1-\frac{u_{1}^{2}}{9.10^{16}} )[/tex]

[tex]3.46.10^{-54}.u_{1}^{2} = 2.02.10^{-38} -[2.02.10^{-38}(\frac{u_{1}^{2}}{9.10^{16}} )][/tex]

[tex]3.46.10^{-54}.u_{1}^{2} = 2.02.10^{-38} -2.24.10^{-23}.u^{2}_{1}[/tex]

[tex]3.46.10^{-54}.u_{1}^{2}+2.24.10^{-23}.u^{2}_{1} = 2.02.10^{-38}[/tex]

[tex]2.24.10^{-23}.u^{2}_{1} = 2.02.10^{-38}[/tex]

[tex]u^{2}_{1} = \frac{2.02.10^{-38}}{2.24.10^{-23}}[/tex]

[tex]u_{1} = \sqrt{9.02.10^{-62}}[/tex]

[tex]u_{1} = 3.10^{-31}[/tex]

The speed of the heavier fragment is [tex]u_{1} = 3.10^{-31}[/tex]m/s.

Answer:

A. We have that radius r = 4.00m intensity I = 8.00 W/m^

total power = power/ Area ( 4πr2)= 8.00 w/m^2( 4π ( 4.00 m)2=1607.68 W

b) I = total power/ 4πr2= 8.00 W/m2 ( 4.00 m/ 9.5 m)2= 1.418 W/m2

c) E = total power x time= 1607 . 68 W x 1s= 1607.68 J

Answer:

The electric field is [tex]E = 5.25 V/m[/tex]

Explanation:

From the question we are told that

    The peak magnitude of the magnetic field is  [tex]B = 17.5 nT = 17.5 *10^{-9}\ T[/tex]

Generally the peak magnitude of the electric field is mathematically represented as

         [tex]E = c * B[/tex]

Where c is the speed of light with value [tex]c = 3.0 *10^{8} \ m/s[/tex]

So

       [tex]E = 3.0 *10^{8} * 17.5 *10^{-9}[/tex]

       [tex]E = 5.25 V/m[/tex]

The peak magnitude of the electric field will be "5.25 V/m".

According to the question,

Magnetic field's peak magnitude, B = 17.5 nT or,

                                                           = 17.5 × 10⁻⁹ T

Speed of light, c = 3.0 × 10⁸ m/s

We know the relation,

→ E = c × B

By substituting the values, we get

      = 3.0 × 10⁸ × 17.5 × 10⁻⁹

      = 5.25 V/m

Thus the above approach is appropriate.

Find out more information about magnetic field here:

https://brainly.com/question/26257705

Answer:

2 m/s

Explanation:

The electromagnetic flow-metre work on the principle of electromagnetic induction. The induced voltage is given as

[tex]E = Blv[/tex]

where [tex]E[/tex] is the induced voltage = 2.88 mV = 2.88 x 10^-3 V

[tex]l[/tex] is the distance between the electrodes in this field which is equivalent to the diameter of the tube = 1.2 cm = 1.2 x 10^-2 m

[tex]v[/tex] is the velocity of the fluid through the field = ?

[tex]B[/tex] is the magnetic field = 0.120 T

substituting, we have

2.88 x 10^-3 = 0.120 x 1.2 x 10^-2 x [tex]v[/tex]

2.88 x 10^-3 = 1.44 x 10^-3 x [tex]v[/tex]

[tex]v[/tex] = 2.88/1.44 = 2 m/s

Answer:

. The loop is pushed to the right, away from the magnetic field

Explanation

This decrease in magnetic strength causes an opposing force that pushes the loop away from the field

Answer:

V = (k*Q)/R

Explanation:

Total potential difference accelerates the electron to being very far away from Q is;

V = (k*Q)/R

Where,

V is the Potential Difference in Joules per Coulomb

k is the constant

Q is the charge in Coulomb

R is Electron distance in cm or m

Example

An electron starts from rest 66.1 cm from a fixed point charge with Q = -0.120 μC. What total potential difference accelerates the electron from being very far away from Q

For k = 9.0*10^9 N*m^2/C^2

V = (k*Q)/R

V = (9.0*10^9 * -0.120*10^-6)/0.661

V = -1633.9 Volt.

The answer will change to positive because V = (k*Q)/R is negative at the outset and Zero far away.

The electron (with a negative charge) has a positive energy in the beginning and that gets converted into a positive kinetic energy "far away".