Answer:
i. Statements A and B
Explanation:
Sana nakatulong
40 POINTS!!! PLEASE HELPP!!!
Please select the word from the list that best fits the definition
One form of energy changes to one other form
(A.) single transformation
(B.) multiple transformation
Answer:
A
Explanation:
if it was B it would say from one to another to another
A rod that is 96.0 cm long is made of glass that has an index of refraction equal to 1.60. The rod has its ends ground to convex spherical surfaces that have radii equal to 8.00 cm and 19.1 cm. An object is in air on the long axis of the rod 19.9 cm from the end that has the 19.1-cm radius.
(a) Find the image distance due to refraction at the 19.1-cm radius surface.
(b) Find the position of the final image due to refraction at both surfaces.
(c) Is the final image real or virtual?
CORRECT ANSWER GETS BRAINLIEST
Answer:
Wax melts as it absorb heat from flame
Explanation:
To know which option is correct, it is important that we know what chemical changes and physical changes are all about.
Chemical change is a change in which the process is not easily reversed and it produces new substance.
Physical change is more like the opposite of chemical change. In this change, the process is easily reversed and no new substance is produced.
Considering the options given above,
1. Iron combines with oxygen to produce rust is a chemical change since a new substance (rust) is formed and we can not reverse the process to get back iron and oxygen.
2. Wax melts as it absorb heat from flame is a physical change since no new substance is formed and we obtained the wax by allowing it to solidified.
3. Pure sodium explodes when dropped in water is a chemical change because we can not reverse the process to get back the sodium.
4. Glucose molecules are produced in plant leaf is also a chemical change.
From the illustrations above, it is evident that: 'Wax melts as it absorb heat from flame' is not a chemical
Drink water at least every
weather.
minutes while exercising in hot
Answer:
Drink water at least every 5 to 20 minutes while exercising in hot weather.
Explanation:
Hope this helps brainliest please
scholastic science world
CHECK FOR UNDERSTANDING: VIDEO GAME TYCOONS
Which of the following is an example of an electromagnetic wave?
a radio wave
a water wave
the oscillation of a spring
sound waves
Which of the following is true of the deep
water layer of the ocean?
A. warmest and least dense of the ocean layers
B. experiences a rapid decrease in temperature
C. is warm in the summer and cold in the winter
D. cold all year round
PLEASE HELP! I'LL GIVE BRAINLEST
Answer:
1.62 m/s²
Explanation:
what do solar winds and the earths magnetic field create
Answer:
bc earth rotates
3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P
Explanation:
Answer:
The interaction between the solar wind and Earth's magnetic field, and the influence of the underlying atmosphere and ionosphere, creates various regions of fields, plasmas, and currents inside the magnetosphere such as the plasmasphere, the ring current, and radiation belts.
Explanation:
the density of gold is 19g/m³ what is the volume of 38g
let the volume be x
19 = 38/x
x=38/19
x=2
volume is 2 cm^3
A golf ball strikes a hard, smooth floor at an angle of 27.0 ° and, as the drawing shows, rebounds at the same angle. The mass of the ball is 0.0200 kg, and its speed is 33.0 m/s just before and after striking the floor. What is the magnitude of the impulse applied to the golf ball by the floor? (Hint: Note that only the vertical component of the ball's momentum changes during impact with the floor, and ignore the weight of the ball.)
Answer:
J = 3.564 N.s
Explanation:
From the given information:
angle θ = 27°
mass = 0.0200 kg
speed = 33.0 m/s
To determine the impulse applied using the equation:
J = m(2V cos θ)
J = 0.0200 (2 × cos (27.0))
J = 0.0200 (2 × 0.8910)
J = 0.03564
J = 3.564 N.s
Determine a formula for the maximum height h that a rocket will reach if launched vertically from the Earth's surface with speed v0(v < vesc). Express in terms of v0, rE, ME, and G.
Initially, the energies are:
[tex]U_{i}=-\frac{G M_{\varepsilon} m}{r_{e}} \\ =K_{i}=\frac{1}{2} m v_{0}^{2}[/tex]
At final point, the energies are:
[tex]U_{f}=-\frac{G M_{\varepsilon} m}{r_{e}+h} \\ K_{f}=\frac{1}{2} m(0)^{2}=0[/tex]
Using conservation law of energy,
[tex]-\frac{G M_{e} m}{r_{e}}+\frac{1}{2} m v_{0}^{2} &=-\frac{G M_{e} m}{r_{\varepsilon}+h} \\ -\frac{G M_{e}}{r_{e}}+\frac{v_{0}^{2}}{2} &=-\frac{G M_{e}}{r_{e}+h} \\ \frac{-2 G M_{e}+r_{e} v_{0}^{2}}{2 r_{e}} &=-\frac{G M_{e}}{r_{e}+h} \\ \frac{r_{e}+h}{G M_{e}} &=\frac{2 r_{e}}{2 G M_{e}-r_{e} v_{0}^{2}}[/tex]
The equation is further simplified as:
[tex]r_{e}+h &=\left(\frac{2 r_{e}}{2 G M_{e}-r_{e} v_{0}^{2}}\right) G M_{e} \\ h &=\frac{2 r_{e} G M_{e}}{2 G M_{e}-r_{e} v_{0}^{2}}-r_{e} \\ &=\frac{2 r_{e} G M_{e}-2 r_{e} G M_{e}+r_{e}^{2} v_{0}^{2}}{2 G M_{e}-r_{e} v_{0}^{2}} \\ & h=\frac{r_{e}^{2} v_{0}^{2}}{2 G M_{e}-r_{e} v_{0}^{2}}[/tex]
Is this right or they wrong definitions which ones are the right ones someone !!!!!
Answer:
They are right.
Explanation:
Answer:
Mechanical Energy : KE + PE
Conversion : "When energy transfers from one form to another"
Potential Energy: the energy possessed by a body by virtue of its position relative to others , stresses within itself, electric charge , and other factors .'
Kinetic Energy: energy of an object in motion
Law of conservation of energy: KE+PE+friction=KE
Explanation:
First of all mechanical energy is kinetic energy plus potential energy (it is the energy of movement) So:
Mechanical Energy : KE + PE
Conversion is when energy converts or becomes a different form. So:
Conversion : "When energy transfers from one form to another"
Potential energy is stored energy, in Physics I or AP Physics I, it is often due to it being at a height, but batteries, foods, etc. are also example of it, so:
Potential Energy: the energy possessed by a body by virtue of its position relative to others , stresses within itself, electric charge , and other factors .'
Kinetic energy is for objects in motion so you got it right!
Kinetic Energy: energy of an object in motion
The law of conservation of energy means there is the same amount of energy before, as there is after, so when you see an equation with energy on both sides, it is usually this. Also, this is the last question left, so this has to be the answer.
Law of conservation of energy: KE+PE+friction=KE
Which is true regarding a child standing up for their own rights?
Answer:
hey mate......looks like the question is incomplete
A torque of 36.5 N · m is applied to an initially motionless wheel which rotates around a fixed axis. This torque is the result of a directed force combined with a friction force. As a result of the applied torque the angular speed of the wheel increases from 0 to 10.3 rad/s. After 6.10 s the directed force is removed, and the wheel comes to rest 60.6 s later.
(a) What is the wheel's moment of inertia (in kg m2)? kg m
(b) What is the magnitude of the torque caused by friction (in N m)? N m
(c) From the time the directed force is initially applied, how many revolutions does the wheel go through?
______ revolutions
Answer:
[tex]21.6\ \text{kg m}^2[/tex]
[tex]3.672\ \text{Nm}[/tex]
[tex]54.66\ \text{revolutions}[/tex]
Explanation:
[tex]\tau[/tex] = Torque = 36.5 Nm
[tex]\omega_i[/tex] = Initial angular velocity = 0
[tex]\omega_f[/tex] = Final angular velocity = 10.3 rad/s
t = Time = 6.1 s
I = Moment of inertia
From the kinematic equations of linear motion we have
[tex]\omega_f=\omega_i+\alpha_1 t\\\Rightarrow \alpha_1=\dfrac{\omega_f-\omega_i}{t}\\\Rightarrow \alpha_1=\dfrac{10.3-0}{6.1}\\\Rightarrow \alpha_1=1.69\ \text{rad/s}^2[/tex]
Torque is given by
[tex]\tau=I\alpha_1\\\Rightarrow I=\dfrac{\tau}{\alpha_1}\\\Rightarrow I=\dfrac{36.5}{1.69}\\\Rightarrow I=21.6\ \text{kg m}^2[/tex]
The wheel's moment of inertia is [tex]21.6\ \text{kg m}^2[/tex]
t = 60.6 s
[tex]\omega_i[/tex] = 10.3 rad/s
[tex]\omega_f[/tex] = 0
[tex]\alpha_2=\dfrac{0-10.3}{60.6}\\\Rightarrow \alpha_1=-0.17\ \text{rad/s}^2[/tex]
Frictional torque is given by
[tex]\tau_f=I\alpha_2\\\Rightarrow \tau_f=21.6\times -0.17\\\Rightarrow \tau=-3.672\ \text{Nm}[/tex]
The magnitude of the torque caused by friction is [tex]3.672\ \text{Nm}[/tex]
Speeding up
[tex]\theta_1=0\times t+\dfrac{1}{2}\times 1.69\times 6.1^2\\\Rightarrow \theta_1=31.44\ \text{rad}[/tex]
Slowing down
[tex]\theta_2=10.3\times 60.6+\dfrac{1}{2}\times (-0.17)\times 60.6^2\\\Rightarrow \theta_2=312.03\ \text{rad}[/tex]
Total number of revolutions
[tex]\theta=\theta_1+\theta_2\\\Rightarrow \theta=31.44+312.03=343.47\ \text{rad}[/tex]
[tex]\dfrac{343.47}{2\pi}=54.66\ \text{revolutions}[/tex]
The total number of revolutions the wheel goes through is [tex]54.66\ \text{revolutions}[/tex].
The driver of a car wishes to pass a truck that is traveling at a constant speed of 19.3 m/s . Initially, the car is also traveling at a speed 19.3m/s and its front bumper is a distance 25.0m behind the truck's rear bumper. The car begins accelerating at a constant acceleration 0.560m/s^2 , then pulls back into the truck's lane when the rear of the car is a distance 26.5m ahead of the front of the truck. The car is of length 4.50m and the truck is of length 20.7m .
Part A) How much time is required for the car to pass the truck?
Part B ) What distance does the car travel during this time?
Part C) What is the final speed of the car?
Answer:
A) t = 10.56 s, B) x = 235 m, C) v = 25.2 m / s
Explanation:
A) We can solve this problem using kinematics expressions.
The distance traveled by the truck is
x_c = v_c t
Distance traveled by the car.
The car must travel the distance that separates them from the truck x₀=25.0. Return to the lane at x₁ = 26.5 m. the length of the truck x₂=20.7m and the length of the car x₃ = 2 4.5 = 9 m, therefore the total length traveled by the car is
x_t = x₁ + x₂ + x₃
x_t = 26.5 + 20.7 +9 = 56.2 m
the distance traveled by the car when it returns to the lane is
x_c + x_t = x₀ + v₀ t + ½ a t²
when the car passes the car the distance traveled by the two vehicles is the same, we substitute
v_c t + x_t = x₀ + v₀ t + ½ a t²
½ a t² + t (v₀ -v_c) + (x₀ - x_t) = 0
we substitute the values
½ 0.560 t² + t (19.3 -19.3) + (25.0 - 56.2) =
0.28 t² -31.2 = 0
t = [tex]\sqrt{ \frac{31.2}{0.28} }[/tex]
t = 10.56 s
This is the time it takes for the car to pass the truck and back into the lane.
B) the distance traveled is
x = v₀ t + ½ a t²
x = 19.3 10.56 + ½ 0.560 10.56²
x = 235 m
C) the final velocity is
v = v₀ + a t
v = 19.3 + 0.560 10.56
v = 25.2 m / s
HELP 30 POINTS
The picture above shows a cross section of the Earth’s interior including both oceanic crust and continental crust. Along the seafloor, there are mid–ocean ridges where magma rises to the surface and creates new crust. There are also areas where crust is recycled as oceanic crust goes below continental crust. What type of boundary would occur at a mid-ocean ridge?
Mid-ocean ridges happen along divergent plate boundaries, where new ocean floor is created as the Earth’s tectonic plates spread apart. As the plates separate, molten rock rises to the seafloor, producing large volcanic eruptions of basalt.
How far could you walk backwards in one hour? Use your speed from the 10m test to calculate the answer. Show your work or you will not receive credit.
Answer: Sweetheart i'm not walking backward for an hour for your little assignment
Explanation: Do it yourself lazy! Have a great day!
A wheel has an angular speed of 32 rev/s when it experiences a constant angular acceleration of 65 rev/s2 which causes it to spin FASTER. During this time the wheel completes 92 rev. Determine how long the wheel was experiencing this angular acceleration and how fast the wheel was spinning at the end of this period. Assume that the wheel doesn't change the direction of its spin.
Answer:
ωf = 113.95 rev/s
t = 1.26 s
Explanation:
We can use the third equation of motion to find out the final spinning speed of the wheel:
[tex]2\alpha \theta = \omega_f^2 -\omega_i^2\\[/tex]
where,
α = angular acceleration = 65 rev/s²
θ = No. of revolutions completed = 92 rev
ωf = final angular speed = ?
ωi = initial angular speed = 32 rev/s
Therefore,
[tex](2)(65\ rev/s^2)(92\ rev) = \omega_f^2 - (32\ rev/s)^2\\\omega_f^2 = 11960\ rev^2/s^2 + 1024\ rev^2/s^2\\\omega_f = \sqrt{12984\ rev^2/s^2}[/tex]
ωf = 113.95 rev/s
Now, for the time we can use the first equation of motion:
[tex]\omega_f = \omega_i +\alpha t\\113.95\ rev/s - 32\ rev/s = (65\ rev/s^2)t\\t = \frac{81.95\ rev/s}{65\ rev/s^2}\\\\[/tex]
t = 1.26 s
PLEASE HELP! I'LL GIVE BRAINLEST
Answer:
In this conversation the Neil astronaut is right
We say that the mass comes to rest if, after a certain time, the position of the mass remains within an arbitrary small distance from the equilibrium position. Will the mass ever come to rest
Answer:
No, the mass will never come to rest
Explanation:
It is so because even at arbitrarily small distance it will experience some amount of force (irrespective of how small the value of force is).
This does not allow the mass to become stationary or in a equilibrium state as it is still subject to some amount of force.
Hence, the the mass will never come to rest
The steering wheel of a car has a radius of 0.19 m, and the steering wheel of a truck has a radius of 0.25 m. The same force is applied in the same direction to each steering wheel. What is the ratio of the torque produced by this force in the truck to the torque produced in the car
Answer:
[tex]\frac{T_t}{T_c} = 1.32[/tex]
Explanation:
The torque applied on an object can be calculated by the following formula:
[tex]T = Fr[/tex]
where,
T = Torque
F = Applied Force
r = radius of the wheel
For car wheel:
[tex]T_c = Fr_c\\[/tex]
For truck wheel:
[tex]T_t = Fr_t[/tex]
Dividing both:
[tex]\frac{T_t}{T_c} = \frac{Fr_t}{Fr_c}[/tex]
for the same force applied on both wheels:
[tex]\frac{T_t}{T_c} = \frac{r_t}{r_c} \\[/tex]
where,
rt = radius of the truck steering wheel = 0.25 m
rc = radius of the car steering wheel = 0.19 m
Therefore,
[tex]\frac{T_t}{T_c} = \frac{0.25\ m}{0.19\ m} \\[/tex]
[tex]\frac{T_t}{T_c} = 1.32[/tex]
What is characteristic of a good insulator?
A. Electrons are usually not moving at all.
B. Electrons are free to move around.
C. Electrons are semi-free to move around.
D. Electrons are tightly bound to the nuclei.
Answer:
D. Electrons are tightly bound to the nuclei.
Explanation:
In an insulator, the electrons of the outer most shell are bound with a very high electrostatic forces coming from the nucleus of each atom so electrons cannot flow around all atoms making up the material as in a conductor.
The characteristic of a good insulator is Electrons are tightly bound to the nuclei. (option d)
In a good insulator, electrons are tightly bound to the nuclei of their atoms. This means that they are not free to move around within the material, unlike conductors where electrons are relatively loosely bound and can move freely. Due to this strong binding, electrons in insulating materials cannot carry an electric charge or energy easily from one atom to another.
When an electric field is applied to an insulator, the electrons may experience a small displacement within their respective atoms, but they generally do not move from one atom to another or flow through the material like they would in a conductor. As a result, insulators prevent the flow of electric current and are used to isolate or protect conductive elements from accidental contact.
So, the correct answer is D. Electrons are tightly bound to the nuclei.
To know more about insulator here
https://brainly.com/question/2619275
#SPJ6
There is a bell at the top of a tower that is 45 m high. The bell weighs 190 kg. The bell has
energy. Calculate it
Answer: The bell has 8550 J energy.
given, There is a bell at the top of a tower that is 45 m high. The bell weighs 190 N
i.e., bell is located at the top of tower, h = 45m
weight of the bell, F = 190 N
workdone by the gravitational force = F.hcos180°
[ gravitational force (i.e., weight ) acting downward while body is located 45m above the ground. so, angle between force and h = 180° ]
workdone by the gravitational force = 190 × 45 × (-1)
= -8550 J
we know, potential energy = negative of workdone
= -(-8550 J) = 8550 J
Answer:
200,000J
Explanation:
KE= 0.5 x m x v^2
KE= 0.5x1000x20^2
KE= 0.5 x 1000 x 400
KE= 500 x 400
KE= 200,000
TIME REMAINING
15:56:15
A plant root is an example of
Type here to search
Answer:
h
Explanation:
What do radio waves and gamma rays have in common?
They are both electromagnetic waves.
They are both low frequency waves.
They can only travel in a vacuum.
They both are part of the visible light spectrum.
Answer:
Both Magnetic
Explanation:
What happens when a neutral atom gains an electrons?
Answer:
The neutral atom becomes an anion.
Explanation:
When a neutral atom gains an electron (e−), the number of protons (p+) in the nucleus remains the same, resulting in the atom becoming an anion (an ion with a net negative charge).
Medical devices implanted inside the body are often powered using transcutaneous energy transfer (TET), a type of wireless charging using a pair of closely spaced coils. And emf is generated around a coil inside the body by varying the current through a nearby coil outside the body, producing a changing magnetic flux. Calculate the average induced emf, of each 10-turn coil has a radius of 1.50 cm and the current in the external coil varies from its maximum value of 10.0 A to zero in 6.25 x10-6s.
Answer:
[tex]0.475\ \text{V}[/tex]
Explanation:
n = Number of turns = 10
r = Radius = 1.5 cm
I = Current = 10 A
t = Time = [tex]6.25\times 10^{-6}\ \text{s}[/tex]
[tex]\mu_0[/tex] = Vacuum permeability = [tex]4\pi\times 10^{-7}\ \text{H/m}[/tex]
Magnetic field is given by
[tex]B=\dfrac{\mu_0I}{2r}\\\Rightarrow B=\dfrac{4\pi 10^{-7}\times 10}{2\times 1.5\times 10^{-2}}\\\Rightarrow B=0.00042\ \text{T}[/tex]
EMF is given by
[tex]\varepsilon=\dfrac{nBA}{t}\\\Rightarrow \varepsilon=\dfrac{10\times 0.00042\times \pi (1.5\times 10^{-2})^2}{6.25\times 10^{-6}}\\\Rightarrow \varepsilon=0.475\ \text{V}[/tex]
The average induced emf is [tex]0.475\ \text{V}[/tex].
A very long straight current-carrying wire produces a magnetic field of 20 mT at a distance d from the wire. To measure a field of 5 mT due to this wire, you would have to go to a distance from the wire of A very long straight current-carrying wire produces a magnetic field of 20 mT at a distance d from the wire. To measure a field of 5 mT due to this wire, you would have to go to a distance from the wire of:_____.
a. 4d.
b. 16d.
c. 2d.
d. 8d.
Answer:
A. 4d
Explanation:
Let's begin with the formula for the magnetic field produced by a long wire.
[tex]B = \frac{\mu_0I}{2\pi d}[/tex]
So [tex]d=\frac{\mu_0 I}{2\pi B }[/tex]
at point d_{1} is
[tex]d_{1}=\frac{\mu_{0} i}{2 \pi B_{1}} \\ \frac{d_{1}}{d}=\frac{\frac{\mu_{0} i}{2 \pi B_{1}}}{\frac{\mu_{0} i}{2 \pi B}} \\ d_{2}=d\left(\frac{B}{B}\right) \\ =d\left(\frac{20 \mathrm{mT}}{5 \mathrm{mT}}\right) \\ =4 d[/tex]
Hence, option (A) is correct answer
Which is true?
a) A changing magnetic field produces a constant perpendicular magnetic field.
b) A changing magnetic field produces a changing perpendicular magnetic field.
c) A changing magnetic field produces a constant parallel magnetic field.
d) A changing magnetic field produces a changing parallel magnetic field.
e) A changing magnetic field produces an electric field.
Answer:
e) A changing magnetic field produces an electric field.
Explanation:
Ok, we start with a magnetic field and let's study how it affects the motion of a single electron. As the magnetic field changes, it will cause an electromotive force, that moves the electron, and because now we have a moving electron, now we will have an electric field. (Such that the direction of the electromotive force opposes the direction in which the magnetic field changes). This also can be deduced if we look at the third Maxwell's equation:
dE/dx = -dB/dt
This says that the spatial change in an electric field depends on how the magnetic field changes as time pass.
Then the correct option is e) A changing magnetic field produces an electric field.
