The graph shown below expresses a radical function that can be written in the form f(x)=a(x+k)^1/n + c. What does the graph tell you about the value of n in this function?

Answer:

6 years

Step-by-step explanation:

A parent increases a child’s monthly allowance by 20% each year. If the allowance is $8 per month now. This is an exponential function, An exponential function is given by:

[tex]y=ab^x[/tex]

Let x be the number of years and y be the allowance. The initial allowance is $8, this means at x = 0, y = 8

[tex]y=ab^x\\8=ab^0\\a=8[/tex]

Since it increases by 20% each year, i.e 100% + 20% = 1 + 0.2 = 1.2. This means that b = 1.2

Therefore:

[tex]y=ab^x\\y=8(1.2^x) \\[/tex]

To find the number of years will it take to reach $20 per month, we substitute y = 20 and find x

[tex]20=8(1.2)^x\\20/8=1.2^x\\1.2^x=2.5\\Taking \ natural\ log\ of \ both\ sides:\\ln(1.2^x)=ln2.5\\xln(1.2)=0.9163\\x=0.9163/ln(1.2)\\x=5.026[/tex]

x = 6 years to the nearest year

Answer:

5 years

Step-by-step explanation:444

Answer:

3 miles

Step-by-step explanation:

5 + m=8

Subtract 5 from each side

5-5 + m=8-5

m = 3

She needs to swim 3 more miles

Answer:

Yelena needs to swim 3 more miles

Step-by-step explanation:

You need to solve for the variable "m", which represents the miles. Based on the information, Yelena swam 5 miles and she needs to swim 8. Solve:

[tex]5+m=8[/tex]

To find the value of m, you need to isolate it on one side of the equation. To do this, you need to get the 8 and 5 on the same side of the equal operation. For this, you need to use reverse operations. This undoes the value from one side and does the same on the other, keeping the equation balanced. Since we have a "positive 5", we take the opposite, which would be a "negative 5". So subtract 5 from both sides of the equation:

[tex]5-5+m=8-5[/tex]

Simplify. The 5's cancel each other out, leaving 0. 8-5 is 3:

[tex]m=3[/tex]

The total miles left that Yelena needs to swim is 3 miles.

:Done

Answer:

c. It does not appear to be within statistical control because there is an upward trend.

Step-by-step explanation:

Statistical process control is a method for quality control which employs statistical method to monitor and control process. It ensures operation efficiency and ensuring required specification to reduce wastes in production lines. Here the process variation is out of control because the statistical control has an upward trend.

Answer:

150<60+30n

Step-by-step explanation:

150 is the maximum amount that she can spend on gas. (which is the total)

she already spend $60

each fill up (n) costs 30

Answer:

the answer is B)

Step-by-step explanation:

Answer:

Its 10x^2+12

Step-by-step explanation:

Answer:

-10X^2+12

Step-by-step explanation:

36×7

=252

Explaination :

First Multiply 6 and 7 we get 42 !

Write 2 and 4 will be added to the product of 3×7

We get 21 and add 4 here

So we get 252

Answer:

[tex]36 \times 7 = 252[/tex]

Step-by-step explanation:

Firstly multiply 6 with 7 you have to write 2 and take 4 carry and then multiply 7 with 3 u get 21 now add the number u carry in 21 u get ur answer. 252.

Hope it helps u mate

Answer:

  0.4 meters

Step-by-step explanation:

The volume is ...

  V = LHB

  12.8 m³ = (8(5B))(5B)(B) = 200B³ . . . fill in given values

  0.064 m³ = B³ . . . . . simplify

  ∛0.064 m = B = 0.4 m

The breadth of the wall is 0.4 meters.

Answer:

Step-by-step explanation:

Since m and k are the parallel lines and a transverse 'l' is intersecting these lines at two different points.

- Opposite angles at the point of intersection of parallel lines and the transverse will be the vertical angles.

∠1 ≅ ∠3, ∠2 ≅ ∠4, ∠5 ≅ ∠8 and ∠6 ≅ ∠7 [Vertical angles]

- Pair of angles between parallel lines 'k' and 'm' but on the opposite side of the transversal are the alternate interior angles.

∠4 ≅ ∠6 and ∠3 ≅ ∠5 [Alternate interior angles]

- Angles having the same relative positions at the point of intersection are the corresponding angles.

∠2 ≅ ∠6, ∠3 ≅ ∠8, ∠4 ≅ ∠7 and ∠1 ≅ ∠5 [Corresponding angles]

- Co interior angles are the angles between the parallel lines located on the same side of the transversal.

∠4 and ∠5, ∠3 and ∠6 [Co interior angles]

- Co exterior angles are the angles on the same side of the transverse but outside the parallel lines.

∠2 and ∠8, ∠1 and ∠7 [Co exterior angles]

Answer:

x≥4

Step-by-step explanation:

The required solution for the inequality 5 - 2x ≤ -3 is x ≥ 4 or x ∈ [4, ∞).

Inequality shows relation between two expression which are not equal to each others.

The given inequality is,

5 - 2x ≤ -3.

Solve the inequality,

Add 3 to both the sides,

5 - 2x + 3 ≤ -3 + 3

8 - 2x ≤ 0

-2x  ≤ -8

Multiply -1 both the sides,

2x ≥ 8

x ≥ 4

The solution for the inequality is x ≥ 4 or x ∈ [4, ∞).

To know more about Inequality on:

https://brainly.com/question/20383699

#SPJ2

Answer:c

Step-by-step explanation:

Answer: The answer is C.

Hope this helps you!

Answer:

We conclude that the population mean is equal to 490.

Step-by-step explanation:

We are given that a random sample of 15 observations is selected from a normal population. The sample mean was 495 and the sample standard deviation 9.

Let [tex]\mu[/tex] = population mean.

So, Null Hypothesis, [tex]H_0[/tex] : [tex]\mu[/tex] = 490      {means that the population mean is equal to 490}

Alternate Hypothesis, [tex]H_A[/tex] : [tex]\mu\neq[/tex] 490     {means that the population mean is different from 490}

The test statistics that will be used here is One-sample t-test statistics because we don't know about population standard deviation;

                               T.S.  =  [tex]\frac{\bar X-\mu}{\frac{s}{\sqrt{n} } }[/tex]  ~ [tex]t_1_4[/tex]

where, [tex]\bar X[/tex] = sample mean = 495

            s = sample standard deviation = 9

             n = sample of observations = 15

So, the test statistics =   [tex]\frac{495-490}{\frac{9}{\sqrt{15} } }[/tex]  ~ [tex]t_1_4[/tex]

                                     =  2.152

The value of t-test statistics is 2.152.

Now, at a 0.01 level of significance, the t table gives a critical value of -2.977 and 2.977 at 14 degrees of freedom for the two-tailed test.

Since the value of our test statistics lies within the range of critical values of t, so we have insufficient evidence to reject our null hypothesis as the test statistics will not fall in the rejection region.

Therefore, we conclude that the population mean is equal to 490.

Add up the P(x) values that correspond to x = 2 through x = 4

0.07+0.22+0.22

So we have a 51% chance of getting an x value such that 1 < x < 5

By using the probability distribution table, the value of P(1<x<5) is 0.51

Probability is the branch of mathematics concerning numerical descriptions of how likely an event is to occur, or how likely it is that a proposition is true

A probability distribution is the mathematical function that gives the probabilities of occurrence of different possible outcomes for an experiment. It is a mathematical description of a random phenomenon in terms of its sample space and the probabilities of events

Given,

We have to find the value of P(1<x<5)

P(1<x<5) = P(2)+P(3)+P(4)

P(2)=0.07

P(3)=0.22

P(4)=0.22

P(1<x<5) = 0.07+0.22+0.22 =0.51

Hence, the value of P(1<x<4)= 0.51

Learn more about Probability and Probability distribution here

https://brainly.com/question/14210034

#SPJ2

Answer:

Option A (repeated measures design) is the correct option.

Step-by-step explanation:

The other three options are not related to the given instance. So that alternative A would be the correct choice.

Question Completion:

WACC = 10.0%

Opportunity cost = $100,000

Net equipment cost (depreciable basis) = $65,000

Straight-line deprec. rate for equipment = 33.333%  

Sales revenues, each year = $123,000

Operating costs (excl. deprec.), each year = $25,000

Tax rate = 35%

Answer:

Century Roofing

Project's NPV is: ($6,578)

Step-by-step explanation:

a) Data and Calculations:

WACC = 10.0%

Opportunity cost = $100,000

Net equipment cost (depreciable basis) = $65,000

Straight-line deprec. rate for equipment = 33.333%  

Sales revenues, each year = $123,000

Operating costs (excl. deprec.), each year = $25,000

Tax rate = 35%

Cash outflow in year 0 = $165,000 (Opportunity and new equipment costs)

Annual Cash inflow = $123,000 - $25,000 - $34,300 = $63,700

PV of annuity for 3 years at 10% = $158,422 ($63,700 x 2.487)

NPV = Cash inflow minus Cash outflow

= $158,422 - $165,000

= ($6,578)

Negative NPV

b) Since Century Roofing could have realized $100,000 from the sale of the building if it decides not to open the new warehouse, this opportunity cost is factored into the calculation of the Net Present Value.  It becomes a present cash outflow.  Century Roofing's opportunity cost is defined as the loss of $100,000 being the future return from the best alternative project when it chooses to build the new warehouse instead of selling off the building.

Answer:

a = 9

Step-by-step explanation:

3a - 27 = 0

3a = 27

a = 27/3

a = 9

3*9  -  27 = 0

27 - 27 = 0

Answer:

a = 9

Step-by-step explanation:

3a-27=0

Add 27 to each side

3a = 27

Divide by 3

3a/3 = 27/3

a = 9

Answer:

[tex]\large \boxed{31/63}[/tex]

Step-by-step explanation:

5/7 - 2/9

Make denominators equal by LCM.

(5 × 9)/(7 × 9) - (2 × 7)/(9 × 7)

45/63 - 14/63

Subtract fractions since denominators are equal.

(45 - 14)/63

31/63

Answer:

[tex]\frac{31}{63}[/tex]

Step-by-step explanation:

Therefore, the answer is [tex]\frac{31}{63}[/tex].

Answer:

APR does not tell you how long your rate is locked for. A 15-year loan may have a lower interest rate, but could have a higher APR, since the loan fees are amortized over a shorter period of time. It is not wise to compare a 30-year loan with a 15-year loan using their respective APRs.

Step-by-step explanation:

Answer:

The velocity is  [tex]v = 886.96 \ m/s[/tex]

Step-by-step explanation:

From the question we are told that

    The period of each revolution is  [tex]T = 1\ day = 24 \ hours[/tex]

    The angle  is [tex]\theta = 30^o[/tex]

     The radius is  [tex]r = 3387.5 \ miles[/tex]

Generally the linear speed is  mathematically represented as

        [tex]v = w * r[/tex]

Where  [tex]w[/tex] is the angular speed which is mathematically represented as

       [tex]w = \frac{2 \pi }{T}[/tex]

substituting values

       [tex]w = \frac{2 *3.142 }{24}[/tex]

        [tex]w = 0.2618 \ rad/s[/tex]

Thus  

         [tex]v = 0.261833 * 3387.5[/tex]

        [tex]v = 886.96 \ m/s[/tex]

Answer:

Step-by-step explanation:

∠a is alternate interior angle to ∠ECD

∠b is alternate interior angle to ∠BCD

so:

If AB || CD then:

m∠a = m∠ECD = 25° + 42° = 67°

m∠b = 42°

Answer:

The percentage is [tex]P(350 < X 650 ) = 86.6\%[/tex]

Step-by-step explanation:

From the question we are told that

   The population mean is  [tex]\mu = 500[/tex]

     The standard deviation is  [tex]\sigma = 100[/tex]

The  percent of people who write this exam obtain scores between 350 and 650    

    [tex]P(350 < X 650 ) = P(\frac{ 350 - 500}{ 100} <\frac{ X - \mu }{ \sigma } < \frac{650 - 500}{ 100} )[/tex]

Generally  

               [tex]\frac{X - \mu }{\sigma } = Z (The \ standardized \ value \ of \ X )[/tex]

   [tex]P(350 < X 650 ) = P(\frac{ 350 - 500}{ 100} <Z < \frac{650 - 500}{ 100} )[/tex]

   [tex]P(350 < X 650 ) = P(-1.5<Z < 1.5 )[/tex]

   [tex]P(350 < X 650 ) = P(Z < 1.5) - P(Z < -1.5)[/tex]

From the z-table  [tex]P(Z < -1.5 ) = 0.066807[/tex]

   and [tex]P(Z < 1.5 ) = 0.93319[/tex]

=>    [tex]P(350 < X 650 ) = 0.93319 - 0.066807[/tex]

=>  [tex]P(350 < X 650 ) = 0.866[/tex]

Therefore the percentage is  [tex]P(350 < X 650 ) = 86.6\%[/tex]

Answer:

(a) The probability that X is at most 30 is 0.9726.

(b) The probability that X is less than 30 is 0.9554.

(c) The probability that X is between 15 and 25 (inclusive) is 0.7406.

Step-by-step explanation:

We are given that 11% of all steel shafts produced by a certain process are nonconforming but can be reworked. A random sample of 200 shafts is taken.

Let X = the number among these that are nonconforming and can be reworked

The above situation can be represented through binomial distribution such that X ~ Binom(n = 200, p = 0.11).

Here the probability of success is 11% that this much % of all steel shafts produced by a certain process are nonconforming but can be reworked.

Now, here to calculate the probability we will use normal approximation because the sample size if very large(i.e. greater than 30).

So, the new mean of X, [tex]\mu[/tex] = [tex]n \times p[/tex] = [tex]200 \times 0.11[/tex] = 22

and the new standard deviation of X, [tex]\sigma[/tex] = [tex]\sqrt{n \times p \times (1-p)}[/tex]

                                                                  = [tex]\sqrt{200 \times 0.11 \times (1-0.11)}[/tex]

                                                                  = 4.42

So, X ~ Normal([tex]\mu =22, \sigma^{2} = 4.42^{2}[/tex])

(a) The probability that X is at most 30 is given by = P(X < 30.5)  {using continuity correction}

        P(X < 30.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] < [tex]\frac{30.5-22}{4.42}[/tex] ) = P(Z < 1.92) = 0.9726

The above probability is calculated by looking at the value of x = 1.92 in the z table which has an area of 0.9726.

(b) The probability that X is less than 30 is given by = P(X [tex]\leq[/tex] 29.5)    {using continuity correction}

        P(X [tex]\leq[/tex] 29.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] [tex]\leq[/tex] [tex]\frac{29.5-22}{4.42}[/tex] ) = P(Z [tex]\leq[/tex] 1.70) = 0.9554

The above probability is calculated by looking at the value of x = 1.70 in the z table which has an area of 0.9554.

(c) The probability that X is between 15 and 25 (inclusive) is given by = P(15 [tex]\leq[/tex] X [tex]\leq[/tex] 25) = P(X < 25.5) - P(X [tex]\leq[/tex] 14.5)   {using continuity correction}

       P(X < 25.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] < [tex]\frac{25.5-22}{4.42}[/tex] ) = P(Z < 0.79) = 0.7852

       P(X [tex]\leq[/tex] 14.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] [tex]\leq[/tex] [tex]\frac{14.5-22}{4.42}[/tex] ) = P(Z [tex]\leq[/tex] -1.70) = 1 - P(Z < 1.70)

                                                          = 1 - 0.9554 = 0.0446

The above probability is calculated by looking at the value of x = 0.79 and x = 1.70 in the z table which has an area of 0.7852 and 0.9554.

Therefore, P(15 [tex]\leq[/tex] X [tex]\leq[/tex] 25) = 0.7852 - 0.0446 = 0.7406.

Step-by-step explanation:

thats shape is a delta

:)

Answer:

arrow head

Step-by-step explanation:

Answer:

a) f(6)=(6)^2+4(6)+1=65

b)f (x+9)=(x+9)^2+4 (x+9)+1=(x^2+18x+81)+(4x+36)+1=x^2+22x+117

f (-x)=(-x)^2-4x+1

Answer:

The population that gives the maximum sustainable yield is 45000 swordfishes.

The maximum sustainable yield is 202500 swordfishes.

Step-by-step explanation:

Let be [tex]f(p) = -0.01\cdot p^{2}+9\cdot p[/tex], the maximum sustainable yield can be found by using first and second derivatives of the given function: (First and Second Derivative Tests)

First Derivative Test

[tex]f'(p) = -0.02\cdot p +9[/tex]

Let equalize the resulting expression to zero and solve afterwards:

[tex]-0.02\cdot p + 9 = 0[/tex]

[tex]p = 450[/tex]

Second Derivative Test

[tex]f''(p) = -0.02[/tex]

This means that result on previous part leads to an absolute maximum.

The population that gives the maximum sustainable yield is 45000 swordfishes.

The maximum sustainable yield is:

[tex]f(450) = -0.01\cdot (450)^{2}+9\cdot (450)[/tex]

[tex]f(450) =2025[/tex]

The maximum sustainable yield is 202500 swordfishes.

Explanation:

We have 4 options for the first choice and 3 options for the next. So there are 4*3 = 12 different combos possible. The tree diagram below shows 12 different paths to pick from. For instance, the right-most path has us pick the number 4 and the color yellow.

Answer:

92 inches squared

Step-by-step explanation:

T/P = 8 * 3

L/R = 3 * 2

F/B = 8 * 2

Solving for surface area!

2(24) + 2(6) + 2(16) = 92

Answer:

The work done by the force is 42.4 Joules

Step-by-step explanation:

The force F = 7 pounds

angle to the horizontal that the force acts ∅ = 30°

The object is moved a distance d = 7 feet

The coordinate  (0 comma 0 )to (7 comma 0 ), indicates that the movement started from the origin, and is along the x-axis.

The work done by this force = F cos ∅ x d

==> 7 cos 30° x 7

==> 7 x 0.866 x 7 = 42.4 Joules

Answer:

The true true level of significance of this test is more than 0.01.

Step-by-step explanation:

No standard deviation and we are told that the investigator still used z rather than the more appropriate t - distribution.

This method of using the z-distribution when standard deviation is unknown will definitely result in a smaller critical value and this in turn simply means that the p-value will be smaller than what it should really be.

Thus, it means the critical value is getting closer to the mean value than the way it should be.

Therefore, means that for a given significance of 0.01 and using the z-distribution under this no standard deviation situation, the true true level of significance of this test is more than 0.01.