Answer: Your question is missing below is the question
Question : What is the no-friction needed speed (in m/s ) for these turns?
answer:
20.1 m/s
Explanation:
2.5 mile track
number of turns = 4
length of each turn = 0.25 mile
banked at 9 12'
Determine the no-friction needed speed
First step : calculate the value of R
2πR / 4 = πR / 2
note : πR / 2 = 0.25 mile
∴ R = ( 0.25 * 2 ) / π
= 0.159 mile ≈ 256 m
Finally no-friction needed speed
tan θ = v^2 / gR
∴ v^2 = gR * tan θ
v = √9.81 * 256 * tan(9.2°) = 20.1 m/s
If the box of 500N is placed over the land of area of 2m²,what pressure is experted by the box on the land?
Answer:
250 Pa or N/m^2
Explanation:
Pressure(P)=F/A=500/2=250 Pa or N/m^2
A man stands still on a moving walkway that is going at a speed of 0.2 m/s to
the west. What is the velocity of the man according to a stationary observer?
A. 0.2 m/s north
B. 0.2 m/s west
C. 0.2 m/s South
D. 0.2 m/s east
When,a man stands still on a moving walkway that is going at a speed of 0.2 m/s to the west,then the velocity of the man according to a stationary observer would be 0.2 m/s west,Therefore, the correct answer would be option B.
What is Velocity?The total displacement covered by any object per unit of time is known as velocity. The velocity of an object is depend on the magnitude as well as the direction of the object.
the mathematical expression for velocity is given by
velocity = total displacement /time
The speed and velocity of the object are very different from each other because speed does not depend upon the direction of the moving object but velocity depends on the magnitude of speed as well as the direction of the moving object.
As per given in the problem a man stands still on a moving walkway that is going at a speed of 0.2 m/s to the west therefore from the perspective of a stationary observer the velocity of man would be 0.2 m/s towards West.
Hence the correct options for the problem would be option B.
Learn more about Velocity from here
brainly.com/question/18084516
#SPJ2
what is the relation between centre of gravity and stability
Explanation:
tilting it will raise the height of its center of gravity.
the gravitational force between two masses at distance of 2.5×10^6 metre is 250 Newton . what should be distance between them to reduce the gravitational force by half?
Answer:
distance between should be 1.25 × 10^6 m
Explanation:
Force is proportional to separation distance.
[tex]250 \: newtons = 2.5 \times {10}^{6} \: metres \\ ( \frac{1}{2} \times 250) \: newtons = d \\ \\ d = \frac{125 \times 2.5 \times {10}^{6} }{250} \\ d = 1.25 \times {10}^{6} \: metres[/tex]
Answer:
distance between should be 1.25×10^6.
Explanation:
force Is proportional to separation .
mrk above answer branilest .
define simple machine
Answer:
simple machine, any of several devices with few or no moving parts that are used to modify motion and the magnitude of a force in order to perform work. ... The simple machines are the inclined plane, lever, wedge, wheel and axle, pulley, and screw.
What is 98.907 rounded to 1 significant figure?
The answer to the digits rounded to one significant figure is 100.
Significant figures are the most important figures in a number of digits.
The closer a digit is to the beginning of a number, the more important or significant it is.
But, the rule for rounding up a set of numbers to the first significant or to one significant figure is that:
If the next number is 5 or more, we round up.If the next number is 4 or less, we do not round up.From the numbers 98.907, 9 is the most significant digit followed by 8.
8 is greater than 5 so we should round up by adding one to 9 making the number 100.
learn more here:
https://brainly.com/question/11566364
The unit of work in terms of Newton and metre is _______
Answer:
Joule
Explanation:
the unit of work is Joule determined by the letter J.
Answer:
JouleExplanation:
Joule is defined as the work done by a force of one newton causing a displacement of one meter. Sometimes, newton-metre (N-m) is also used for measuring work.
Define SI units. Also mention their importance. SI unit The
Answer:
SI unit is an internationally accepted system and have the same value all over the world .
I don't know the importance sotry
Answer:
SI unit is an internationally accepted system that have same value all over the world.
what is the role of the communicator in a dc generator?
A) it keeps the electric current flowing in one direction
B) it keeps the magnetic fields of the permanent magnet steady
C) it causes the magnetic fields of the permanent magnets to reverse
D) it causes the electric current to constantly reverse its direction
Answer:
C
Explanation:
Answer:
A)
Explanation:
it keeps the electric current flowing in one direction
Why is velocity proportial to pressure?
Answer:
Pressure and velocity are inversely proportional to each other because if pressure increase, the velocity decrease to keep the algebraic sum of potential energy, kinetic energy and pressure constant.
4 A student says that he has made a magnetic field with some iron filings. What would
you say to him?
Answer:
Yes but no
Explanation:
Here the kid cant say that he has created s magnetic field as iron fillings do not have magnetic properties
define one standard kg
Answer:
The mass of platinum iridium rod whose diameter and height are equal an kept at international bureau of weight and measurement in Paris of France is called as one standard kg.
What do is mean by environment friendly behaviour?
Why does the weight of a body differ on different celestial bodies of the universe?
A certain superconducting magnet in the form of a solenoid of length 0.28 m can generate a magnetic field of 7.0 T in its core when its coils carry a current of 80 A. The windings, made of a niobium-titanium alloy, must be cooled to 4.2 K. Find the number of turns in the solenoid.
Answer:
The number of turns in the solenoid is 19506.
Explanation:
Length of solenoid, L = 0.28 m
Magnetic field, B = 7 T
Current, I = 80 A
Let the number of turns is N.
The formula used to find the magnetic field is
[tex]B = \frac{\mu 0N I}{L}\\\\7 = \frac{4 \times 3.14\times 10^{-7}\times N\times 80}{0.28}\\\\N = 19506[/tex]
pls someone help me pls…. and pls explain to me how
Answer:
1.12 × 10⁴ m/s
Explanation:
The escape velocity of the object v = √(2GM/R) where G = gravitational constant = 6.67 × 10⁻¹¹ Nm²/kg², M = mass of the Earth = 6 × 10²⁴ kg and R = radius of the Earth = 6.4 × 10⁶ m
Since v = √(2GM/R)
Substituting the values of the variables into the equation, we have
v = √(2GM/R)
v = √(2 × 6.67 × 10⁻¹¹ Nm²/kg² × 6 × 10²⁴ kg/6.4 × 10⁶ m)
v = √(13.34 × 10⁻¹¹ Nm²/kg² × 6 × 10²⁴ kg/6.4 × 10⁶ m)
v = √(80.04 × 10⁻¹¹ × 10²⁴Nm²/kg/6.4 × 10⁶ m)
v = √(80.04 × 10¹³Nm²/kg ÷ 6.4 × 10⁶ m)
v = √(80.04 ÷ 6.4 × 10¹³ ÷ 10⁶Nm/kg)
v = √(12.50625 × 10⁷ Nm/kg)
v = √(125.0625 × 10⁶ Nm/kg)
v = 11.18 × 10³ m/s
v = 1.118 × 10 × 10³ m/s
v = 1.118 × 10⁴ m/s
v ≅ 1.12 × 10⁴ m/s
Two forces whose resultant is 100N are at right angle to eachother. if one of them makes an angle of 30° with the resultant, determine its magnitude
Let F₁ and F₂ denote the two forces, and R the resultant force.
F₁ and F₂ point perpendicularly to one another, so their dot product is
F₁ • F₂ = 0
We're given that one of these vectors, say F₁, makes an angle with R of 30°, so that
F₁ • R = ||F₁|| ||R|| cos(30°)
But we also have
F₁ • R = F₁ • (F₁ + F₂) = (F₁ • F₁) + (F₁ • F₂) = F₁ • F₁ = ||F₁||²
So, knowing that ||R|| = 100 N, we get that
(100 N) ||F₁|| cos(30°) = ||F₁||²
(100 N) cos(30°) = ||F₁||
||F₁|| ≈ 86.6 N
(And the same would be true for F₂.)
why is it important to have regular super vision of the weights and the measurements in the market?
Answer:
Obeying to weights & measurement regulations in both national and international metrology legislation, standards and test procedures is a requirement to participate in any market because it's aimed to safeguard the consumers and promote fair competition, which provides efficiency and saves unnecessary costs to U.S. businesses and stakeholders.
Explanation:
In the U.S., the National Institute of Standards and Technology (NIST) has an Office of Weights and Measures (OWM) that represents the country in the International Organization of Legal Metrology (OIML)
Which of the elements below have seven electrons in their outermost energy levels? A.) Cr, Mn, and Fe B.) Br, I, and Ci C.) O, S, and Se D.) He, Ne, and Ar
Answer:
B
Explanation:
the Halogen families have 7 valence electrons
Un auto se desplaza por una carretera recta a una velocidad de 85 km/h. Al cabo de 2 horas, ¿qué distancia habrá recorrido, en metros?
Answer:
Distancia, D = 170,000 metros
Explanation:
Dados los siguientes datos;
Velocidad = 85 km/h Tiempo = 2 horasPara encontrar la distancia recorrida, en metros;
Matemáticamente, la distancia recorrida por un objeto se calcula mediante la fórmula;
Distancia = velocidad * tiempo
Sustituyendo los valores en la fórmula, tenemos;
Distancia = 85 * 2
Distancia = 170 kilómetros
A continuación, convertiríamos el valor en kilómetros a metros;
Conversión:
1 kilómetros = 1000 metros
170 kilómetros = D metros
Multiplicación cruzada, tenemos;
D = 170 * 1000
D = 170,000 metros
Por lo tanto, habría viajado 170,000 metros después de 2 horas.
if a person buys 10 kg apples in himalayan region and sells in terai region will he get profit or loss. why?
Answer:
he will be in profit
Explanation:
Himalayan region are high above the sea level so the gravity will be less there compared to the Terai region
Terai lies way below he Himalayan region so the pull of gravity will be more compared to Himalayan region
that's why he will be in profit but not loss
which physical property of the gas molecules gives the measurement of temperature
The temperature of a gas molecule is measured by the average translational kinetic energy
Answer:
The temperature of a gas is a measure of the average translational kinetic energy of the molecules. In a hot gas, the molecules move faster than in a cold gas; the mass remains the same, but the kinetic energy, and hence the temperature, is greater because of the increased velocity of the molecules
Explanation:
This is also from Go0gle because my explanation would've been an essay long .
but in shorter version if the gas molecules move fast it's hot an if it moves slow its cold hope this helps .
Which one of the following explains how light energy helps us see all kinds of objects around us?
a flashlight shining light on a book
Light is absorbed by the objects and does not reach our eyes.
The objects emit light that enters our eyes.
Light reflects off the objects and enters our eyes.
Light travels in a straight line until it enters our eyes.
Answer:
light reflects off the objects and enter our eyes
why is the fuse used in a circuit called safety fuse?
Answer:
The maximum current which can flow through a fuse without melting it, is called its rating. ... If current higher than 8 A flows through the fuse, it would melt and circuit gets broken. ... Hence, fuse acts as a safety device
Answer:
The guy above me is right
Explanation:
Convert 400 mm to m using the method of dimensional analysis
Answer:
To convert 400 mm to m you can apply the formula [m] = [mm] / 1000; use 400 for mm. Thus, the conversion 400 mm m is the result of dividing 400 by 1000. 0.4
PLEASE MARK AS BRAINLIEST ANSWER
derive an expression for resistivity of conductor of length l and area of cross section A
Answer
Resistivity R = K * L / A where resistivity is constant for material, L the length of the material and A the area of the material
K = R * A / L where R is the resistance of the material
Logam P dan Q sejenis. Logam P yang memiliki panjang 1 meter dipanaskan hingga mengalami kenaikan suhu 12ºC, akibatnya logam bertambah panjang 0,2 cm. Logam Q juga dipanaskan hingga mengalami kenaikan suhu 10°C dan panjangnya bertambah 0,1 cm. Tentukanlah panjang mula-mula logam Q!
Answer:
I don't know ???
sorry
Which statement best describes the arrangement of electrons in an atom of fluorine (F)?
(1 point) giving brainliest for sure
There are two electrons in the first energy level and seven electrons in the second energy level.
There are two electrons in the first energy level and five electrons in the second energy level.
There are five electrons in the first energy level and two electrons in the second energy level.
There are seven electrons in the first energy level and two electrons in the second energy level.
Flourine is an element which has 9 electrons. The first energy level can only hold upto 2 electrons so therefore two electrons of the fluorine element will be in the first orbital.
In the second orbital there will be seven electrons. The configuration will be as 1s2, 2s2 , 2p5 .
The first orbital has capacity of two electrons and then the remaining two electrons will be in higher second energy level.
The further 5 electrons will be in lower second energy level which is denoted by p.
Learn more at https://brainly.com/question/24373325
Answer:
#1. 5
#2.They have valence electrons in the same energy level.
#3. Helium atoms have 2 valence electrons, while atoms of the other elements in the group all have 8 valence electrons.
#4. cesium (Cs)
#5. There are two electrons in the first energy level and seven electrons in the second energy level.
Explanation:
Ag,Au and Cu are called coinage metals why plzzzz hurry its urgent plzzz
Answer:
This is because these metals are used for minting (making) coins.
Answer:
It is bcz it is used for making coins
Those of you who have recently finished high school physics-did you struggle? If you did, where did you most struggle in? Was it the tests? Or a specific topic?
Thank you!
Answer:
I'm over halfway through it so don't have a complete answer but i think you just need to keep ontop of everything and write down all the key equations on flashcards or something and aim to learn them at the beginning of each topic. i found the longer questions hard so recommend practising those
Explanation:
