Answer:
drug misuse
Explanation:
this is because the person is using those drugs but indiscriminately meaning without correct judgement or in this context without a prescription therefore without following guidelines and legal standards eg self medication
but it is not abuse because it is being used for its intended purpose just without any guidelines
THE LENGTH OF A PENDULUM IS (1.5±0.01)m AND THE ACCELERATION DUE TO GRAVITY IS TAKEN AS (9.8±0.1)ms-² calculate the time period of the pendulum with uncertainty in it
Answer:
2.4583 ± 0.0207 seconds
Explanation:
The time period of a pendulum is approximately given by the formula ...
T = 2π√(L/g)
The maximum period will be achieved when length is longest and gravity is smallest:
Tmax = 2π√(1.51/9.7) ≈ 2.47903 . . . seconds
The minimum period will be achieved for the opposite conditions: minimum length and maximum gravity:
Tmin = 2π√(1.49/9.9) ≈ 2.43756 . . . seconds
If we want to express the uncertainty using a symmetrical range, we need to find half their sum and half their difference.
T = (2.47903 +2.43756)/2 ± (2.47903 -2.43756)/2
T ≈ 2.4583 ± 0.0207 . . . seconds
__
We have about 2+ significant digits in the given parameters, so the time might be rounded to 2.46±0.02 seconds.
The distance from the Earth to the Sun equals 1 AU. Neptune is 30 AU from the Sun. How far is Neptune from the Earth? AU
Answer:
The answer is 29 AU
Hoped I helped
mark me as brainliest
Answer:
29
Explanation:
Hi please, I Have An attachment on Waves, Just two Objective Questions Whoever Answers Will be Marked Brainliest thank you.
Answer:
The first answer is W and Z, since they appear to be a period apart. Dont know the second question. I did what I could, hope someone can answer the second.
If the reading of a linear scale is 4 mm and no of division of the circular scale is 50, then what will be the diameter of the wire in mm? (Least count = 0.01) * 2 points 2.25 3.5 4.5 9.0
Answer:
Diameter of Wire = 4.5 mm
Explanation:
First, we need to find the fractional part of the reading. The fractional part o the reading can be given by the following formula:
Fractional Part = Circular Scale Reading x Least Count
where,
Circular Scale Reading = 50
Least Count = 0.01 mm
Therefore,
Fractional Part = (50)(0.01 mm)
Fractional Part = 0.5 mm
Now, the diameter of the wire can be given by using the following formula:
Diameter of Wire = Linear Scale Reading + Fractional Part
Diameter of Wire = 4 mm + 0.5 mm
Diameter of Wire = 4.5 mm
An electric lamp is marked 240v, 60w
It is left to operate for 1h. How much
heat is generated by the lamp
Answer:
H = 0.06 kWh
Explanation:
Given that,
Power of an electric lamp, P = 60 W
Voltage, V = 240 V
It is operated for 1 hour
We need to find the heat generated by the lamp. Heat generated is given by :
[tex]H=P\times t\\\\H=60\ W\times 1\ h\\\\H=60\ Wh\\\\H=0.06\ kWh[/tex]
So, 0.06 kWh of the heat is generated by the lamp.
Suppose an experiment is designed to test the durability of batteries in different conditions. All of the batteries tested are double-A (AA) Brand X. All sets of batteries are preconditioned in different environmental conditions for exactly 168 hours (1 week).
Set 1: 0°C (freezing point of water)
Set 2: 24°C (approximately room temperature)
Set 3: 37°C (approximately body temperature)
The batteries are then continuously used to power identical mechanical drummer toys. As long as the toy keeps drumming the battery is considered functional. The drumming time for each toy is measured as an indication of battery durability. In this experiment, which condition is not controlled?
A.) temperature
B.) brand of batteries
C.) test for durability
D.) type of battery (battery size)
Answer:
I assume its c. Since its talking about testing.
Explanation:
Answer:
The answer is test of durability
Explanation:
A butterfly is flying around and its velocity(v) as a function of time(t) is given in the graph below where rightwards is the positive velocity direction. What is the butterfly's displacement x from t=2 to 4s? Answer with two significant digits.
Answer: 19 meters.
Explanation:
We want to find the total displacement between t = 2s and t = 4s.
To do it, we can integrate our function, first write our velocity equation.
for t ≤ 3s, we have a linear equation, let's write it:
A linear relationship can be written as:
y = a*t + b
where a is the slope and b is the y-axis intercept.
For a line that passes through the points (x1, y1) and (x2, y2), the slope can be written as:
a = (y2 - y1)/(x2 - x1).
Now we can see that our line passes through the points (1, 0) and (0, -2)
then the slope is:
a = (0 -(-2)/(1 - 0) = 2/1 = 2
and knowing that when t = 0s, v(0s) = -2m/s, then our equation is:
v(t) = (2m/s^2)*t - 2m/s for t ≤ 3s
now, for t ≥3s the equation is constant, v(t) = 4m/s.
then we have
v(t) = (2m/s^2)*t - 2m/s -------if t ≤ 3s
v(t) = 4m/s ----- if t ≥ 3s
Now we integrate over time to get the position:
for t ≤ 3s we have:
p(t) = (1/2)*(2m/s^2)*t^2 - 2m/s*t + C
where C is a constant of integration, as we are calculating the displacement this constant actually does not matter, so we can use C = 0m
p(t) = (1m/s^2)*t^2 - 2m/s*t for t ≤ 3s
and p(3s) = (1m/s^2)*3s^2 - 2m/s*3s = 9m - 6m = 3m is the initial position of the other part of the function.
for t ≥ 3s we have:
p(t) = 4m/s*t + p(3s) = 4m/s*t + 3m
then the position equation is:
p(t) = (1m/s^2)*t^2 - 2m/s*t ---- t ≤ 3s
p(t) = 4m/s*t + 3m --- if t ≥ 3s
Now the displacement will be:
p(4s) - p(2s) where for each time, you need to use the correct function:
p(4s) = 4m/s*4s + 3m = 16m + 3m = 19m
p(2s) = (1m/s^2)*2s^2 - 2m/s*2s = 4m - 4m = 0m
p(4s) - p(2s) = 19m - 0m = 19m
The butterfly displacement x from t=2 to 4s is 19 meters.
What is displacement?The spacing between two specified points is represented by the one-dimensional quantity of displacement (symbolised as d or s), commonly known as length or distance.
The total displacement between t = 2s and t = 4s.
Integrate our function, the velocity equation.
for t ≤ 3s, we have a linear equation, let's write it:
A linear relationship can be written as:
y = a x t + b
where a is the slope and b is the y-axis intercept.
For a line that passes through the points (x1, y1) and (x2, y2), the slope can be written as:
a = (y2 - y1)/(x2 - x1).
The line passes through the points (1, 0) and (0, -2)
The slope is:
a = (0 -(-2)/(1 - 0) = 2/1 = 2
When t = 0s, v(0s) = -2m/s, then our equation is:
v(t) = (2m/s²) x t - 2m/s for t ≤ 3s
now, for t ≥3s the equation is constant, v(t) = 4m/s.
v(t) = (2m/s²) x t - 2m/s -------if t ≤ 3s
v(t) = 4m/s ----- if t ≥ 3s
Now we integrate over time to get the position:
for t ≤ 3s we have:
p(t) = (1/2) x (2m/s²) x t^2 - 2m/s x t + C
where C is a constant of integration, to calculate the displacement this constant actually does not matter,
p(t) = (1m/s²)*t^2 - 2m/s x t for t ≤ 3s
and p(3s) = (1m/s^2) x 3s² - 2m/s x 3s = 9m - 6m = 3m is the initial position of the other part of the function.
for t ≥ 3s we have:
p(t) = 4m/s x t + p(3s) = 4m/s x t + 3m
then the position equation is:
p(t) = (1m/s^2) x t² - 2m/s x t ---- t ≤ 3s
p(t) = 4m/s x t + 3m --- if t ≥ 3s
Now the displacement will be:
p(4s) - p(2s) where for each time, you need to use the correct function:
p(4s) = 4m/s x 4s + 3m = 16m + 3m = 19m
p(2s) = (1m/s²) x 2s²- 2m/s x 2s = 4m - 4m = 0m
p(4s) - p(2s) = 19m - 0m = 19m
Thus, the displacement is 19 m.
To learn more about displacement, refer to the link:
https://brainly.com/question/11934397
#SPJ2
Calculate the current passing through a conductor of resistance 4ohms. If a potential difference of 15V its ends______
Explanation:
current = velocity/resistance
I = V/R
15/4
current = 3.75A
hope this helps...
A net force of 0.7 N is applied on a body. What happens to the acceleration of the body in a second trial if half of the net force is applied?(1 point) The acceleration is double its original value. The acceleration is half of its original value. The acceleration is the square of its original value. The acceleration remains the same.
Answer:
The answer is The acceleration is double its original value.
Explanation:
It is because of the second trial of accelaration. Because of this, an object's acceleration doubles from its original value.Hope this helps....
Have a nice day!!!!
Answer:
The acceleration is half of its original value
Explanation:
A bat is flitting about in a cave, navigating via ultrasonic bleeps. Assume that the sound emission frequency of the bat is 38.9 kHz. During one fast swoop directly toward a flat wall surface, the bat is moving at 0.015 times the speed of sound in air. What frequency does the bat hear reflected off the wall?
Answer:
40085 Hz
Explanation:
We are given; Sound frequency emmision of bat;f = 38.9 kHz = 38900 Hz
Bat is moving at 0.015 times the speed of sound in air.
Speed of sound in air = 343 m/s
The formula for waves reflected off the wall is calculated from Doppler equation as:
f' = f(v + v_d)/(v - v_s)
Where;
f is the frequency = 38900 Hz
f' is the detected frequency,
v_d is the velocity of the detector = 0.015 × 343 = 5.145
v_s is the velocity of the source = 0.015 × 343 = 5.145 m/s
v is the velocity of the sound = 343 m/s
Thus;
f' = 38900(343 + 5.145)/(343 - 5.145)
f' ≈ 40085 Hz
A particular celestial body orbits at a particular speed. For every two orbits it makes, another celestial body orbits three times. This orbital resonance would correspond to which musical interval?
Answer:
Explanation:
frequency of first body f₁ = 2 / T where T is time taken by it for making two orbits
frequency of second body f₂ = 3 / T
ration of two frequency
f₁ / f₂ = 2 / 3
This ratio is called perfect fifth in musical interval .
Question 14 of 30
A bundle of roofing shingles slides off a roof and is falling to the ground. As it
falls, what kind of energy does it possess?
O A. Kinetic only
O B. Potential only
O C. Radiant
D. Kinetic and potential
Answer:
kinetic and potential
an object weights 0.250 kgf in air 0.150 in water and 0.125 in an oil.find out the density of the object and the oil
Answer:
1) The density of the object = 2500 kg/m³
2) The density of the oil = 1250 kg/m³
Explanation:
1) The information relating to the question are;
The mass of the object in air = 0.250 kgf
The mass of the object in water = 0.150 kgf
The mass of the object in the oil = 0.125 kgf
By Archimedes's principle, we have;
The upthrust on the object in water = Mass in air - mass in water = The weight of the water displaced
The upthrust on the object in water = 0.250 - 0.150 = 0.1 kgf
∴ The weight of the water displaced = 0.1 kgf
Given that the object is completely immersed in the water, we have;
The volume of the water displaced = The volume of the object
The volume of 0.1 kg of water water displaced = Mass of the water/(Density of water)
The volume of 0.1 kg of water = 0.1/1000 = 0.0001 m³
The density of the object = (Mass in air)/ volume = 0.250/0.0001 = 2500 kg/m³
The density of the object = 2500 kg/m³
2) Whereby the mass of the object in the oil = 0.125 kgf
The upthrust of the oil = The weight of the oil displaced
The upthrust of the oil on the object = Mass of the object in air - mass of the object in the oil
The upthrust of the oil on the object = 0.250 - 0.125 = 0.125 kgf
The weight of the oil displaced = The upthrust of the oil
Given that the volume of the oil displaced = The volume of the oil, we have;
The volume of the oil displaced = 0.0001 m³
The mass of the 0.0001 m³ = 0.125 kg
Therefore the density of the oil = 0.125/0.0001 = 1250 kg/m³.
The density of the oil = 1250 kg/m³.
You need to repair a broken fence in your yard. The hole in your fence is around 3 meters in length and for whatever reason, the store you go to has oddly specific width 20cm wood. Each plank of wood costs $16.20, how much will it cost to repair your fence?
The correct answer is $243
Explanation:
The hole in the fence is 3 meters, this means it is necessary to buy wood that covers this distance. Now, each meter is equal to 100 centimeters, this means 3 meters is equivalent to 300 centimeters ( 100 cm in each meter x 3). Besides this, it is known each plank covers 20cm and costs $16.20. In this context, the next step is to find how many planks are needed. The process is shown below:
300 cm (total width) ÷ 20 cm (width of 1 plank) = 15 planks
This means 15 planks are needed. Finally, fin the total cost
15 planks x $16.20 (cost of 1 plan) = $243
An object of mass 25kg is at rest. What is its momentum ?
Answer:
[tex]\boxed{0}[/tex]
Explanation:
Momentum is the measure of mass in motion.
[tex]\sf momentum = mass \times velocity[/tex]
An object at rest has a velocity of 0.
[tex]p=mv[/tex]
[tex]p = 25 \times 0[/tex]
[tex]p=0[/tex]
The momentum of an object at rest is always 0.
Eli and Andy want to find out which of the two is stronger. Eli pushes a table with a force of 120 newtons while Andy pushes the table from the opposite side with a force of 125 newtons. Ignoring the masses of Eli and Andy, what is the resultant acceleration of the table if its mass is 10.0 kilograms?
Answer:
a = 0.5 m/s²
Explanation:
the type of problem is called a Newtons second law of motion.
and the equation would be the sum of F = m * a where m = mass and a = acceleration
forces are 125N and the opposite direction is 120N
Eli pushes the table with a force of 120N towards Andy
and
Andy pushes the table with a force of 125N towards Eli
mass of table given as 10 kg.
using the equation
120N - 125N = 10kg * a
a = (120-125) / 10
a = -0.5 m/s² so the acceleration is in the direction of Andy's force towards Eli.
therefore a = 0.5 m/s²
Answer:
B.
0.50 meters/second2
Explanation:
The same motor is used in rockets with different masses. The rockets have different accelerations. According to Newton’s second law, how is acceleration expected to change as the rocket mass increases? As rocket mass increases, acceleration decreases. There are no changes in acceleration, as it would depend on the amount of force. As rocket mass increases, acceleration increases. Acceleration cannot be predicted based on changes in mass.
Answer:
As rocket mass increases, acceleration decreases.
Explanation:
From Newton's second law of motion;
F= ma
Where;
m= mass of the object
a= acceleration of the object
Hence we can write;
a= F/m
This implies that an increase in mass (m) will lead to a decrease in acceleration if the force on the object is held constant.
Hence, if the rockets have different masses, they will have different accelerations.
Hello!
---------
As rocket mass increases, acceleration decreases.
Hope this helps! The rest are available on Quizlet at "Unit 6: Lesson 4 Force, Mass and Acceleration". Thanks and good luck!
At summer camp, the swimming course runs the length (L) of a small lake. To determine the length of the course, the camp counselors measure the two "dry" legs of a right triangle. What is the length in meters of the swimming course in the figure below?
Answer:
47.17 m
Explanation:
From the diagram of the question attached, The length of the legs are 25 m and 40 m . This legs form a right angle triangle with the length of the swimming course (L).
Pythagoras theorem states that for a right angle triangle with hypotenuse a and legs b and c, then:
a² = b² + c²
In the triangle, the length of the swimming course (L) is the hypotenuse and the two legs are 25 m and 40 m. Using Pythagoras:
L² = 25² + 40²
L² = 625 + 1600
L² = 2225
L = √2225
L = 47.17 m
Help please answer the two questions
Explanation:
this is it. hope u understand
Describe the motion of water waves.
Answer:
Water waves are an example of waves that involve a combination of both longitudinal and transverse motions. As a wave travels through the waver, the particles travel in clockwise circles. The radius of the circles decreases as the depth into the water increases.
what are some factors that affect the frequency of sound
Answer:
1. direction of propagation of sound
2.medium through which sound trsnsmitted
A student is planning an investigation on the properties of different types of matter. What would be the best method to find the volume of an irregularly shaped object, such as a rock?
Explanation:
Volume is the amount of space an object takes up, while mass is the amount of matter in an object. ... To find the volume of an irregular sized object, one would use the displacement method for measuring volume and place the object in water and measure the amount of water that is displaced.
Answer:
To measure the volume of an irregularly shaped object, pour some water in a measuring cylinder. Then suspend the irregularly shaped object with a thread. After that , move the object gradually downwards and immerse it in water. The volume of the irregularly shaped object is the difference between the volume of the liquid before and after. After measuring the difference, we come to know about the volume of the irregularly shaped object.
A car accelerates at a rate of 3 m/s^2. If its original speed is 8 m/s, how many seconds will it take the car to reach a final speed of 25 m/s?
Answer:
[tex]\Large \boxed{\mathrm{5.67 \ seconds }}[/tex]
Explanation:
[tex]\displaystyle \mathrm{acceleration \ = \ \frac{final \ velocity - initial \ velocity }{elapsed \ time}}[/tex]
[tex]\displaystyle A \ = \ \frac{V_f - V_i }{t}[/tex]
[tex]\displaystyle 3 \ = \ \frac{25 - 8 }{t}[/tex]
[tex]\displaystyle 3 \ = \ \frac{17 }{t}[/tex]
[tex]\displaystyle t \ = \ \frac{17 }{3} \approx 5.67[/tex]
as fast as you can find the answer
Answer:
Explanation:
a) From the diagram, the load will be expressed in newton. The load will be the weight of the box on the inclined plane.
Load = mass * acceleration due to gravity.
Given the mass of the object = 100kg
acceleration due to gravity = 9.8m/s²
Load (in Newton) = 100*9.8
Load (in Newton) = 980N
b) The formula for calculating the velocity ratio of an inclined plane is expressed as VR = 1/sinθ where θ is the angle of inclination.
Given θ = 30°,
VR = 1/sin30°
VR = 1/0.5
VR = 1/(1/2)
VR = 1* 2/1
VR = 2
The velocity ratio is 2.
c) Length of the inclined plane can be calculated using the SOH, CAH, TOA trigonometry identity.
According to SOH, sinθ = opposite/hypotenuse
sin30° = 1/2 = opp/hyp
This shows that the opposite side of the triangle is 1 and the hypotenuse is 2. The length if the inclined is the length of the longest side i.e the hypotenuse. Hence the length of the inclined plane is 2m
d) Mechanical Advantage is the ratio of the load to the effort applied on an object.
Given the Load = 980N and the effort applied to the load on the incline plane = 400N
MA = Load/Effort
MA = 980/400
MA = 2.45
e) Efficiency = MA/VR * 100
Efficiency = 2.45/2 * 100
Efficiency = 122.5%
(b) A cylinder of cross-sectional area 0.65m2 and
height 0.32m has a mass of 2. Ikg. If there is a
cavity inside, find the volume of the cavity.
(Density of cylinder = 11.053 kg/m^3)
Answer:
The volume of the cavity is 0.013m^3
Explanation:
To find the volume of the cavity, the major parameter missing is the diameter of the cavity itself. we can obtain this using the following steps:
Step one:
Obtain the volume of the cylinder by dividing the mass of the cylinder by the density.
Volume of the cylinder = 2.1 / 11.053 =0.19[tex]m^{3}[/tex]
Step two:
From the volume of the cylinder, we can get the radius of the cylinder.
[tex]radius = \sqrt{\frac{V}{\pi \times h}} = \sqrt{\frac{0.19}{\pi \times 0.32}} =0.44m[/tex]
Step three:
From the cross-sectional area, we can obtain the radius of the cavity.
Let the radius of the cavity be = r, while the radius of the cylinder be = R
CSA of cavity =
[tex]\pi({R^2}-r^2) = CSA\\0.65 = \pi (0.32^2-r^2)\\r= 0.115m[/tex]
Step Four:
calculate the volume of the cavity using volume =[tex]\pi r^2 \times h[/tex]
Recall that the cavity has the same height as the original cylinder
[tex]volume = \pi \times 0.115^2\times 0.32= 0.013m^3[/tex]
element X has two isotopes: X-27 and x-29. x-27 has an atomic mass of 26.975 and a relative abundance of 82.33%, and X-29 has an atomic mass of 29.018 and a relative abundance of 17.67%. calculate the atomic mass of element X. show your work
Answer:
27.34 (no unit)
Explanation:
26.975*82.33%+29.018*17.67%
=27.34
in how many ways can five basketball players be placed in three postitions?
Answer:
Well if they playing a game like that
A wire of length 5mm and Diameter 2m extends by 0.25 when a force of 50N was use. calculate the
a. Stress of the wire.
b. Strain of the wire
Answer and Explanation:
Data provided in the question
Force = 50N
Length = 5mm
diameter = 2.0m = [tex]2\times 10^{-3}[/tex]
Extended by = 0.25mm = [tex]0.25\times 10^{-3}[/tex]
Based on the above information, the calculation is as follows
a. The Stress of the wire is
[tex]= \frac{force\ applied}{area\ of \ circle}[/tex]
here area of circle = perpendicular to the are i.e cross-sectional i.e
= [tex]\frac{\pi d^{2}}{4}[/tex]
= [tex]\frac{\pi(2\times 10^{-3})^2}{4}[/tex]
Now place these above values to the above formula
[tex]= \frac{4\times 50}{\pi\times 4 \times 10^{-6}} \\\\ = \frac{50}{\pi}[/tex]
= 15.92 MPa
As 1Pa = 1 by N m^2
So,
MPa = 10^6 N m^2
b. Now the strain of the wire is
[tex]= \frac{Change\ in\ length}{initial\ length} \\\\ = \frac{0.25\times 10^{-3}}{5}[/tex]
= [tex]5 \times 10^{-5}[/tex]
A 50.5-turn circular coil of radius 4.75 cm can be oriented in any direction in a uniform magnetic field having a magnitude of 0.455 T. If the coil carries a current of 22.5 mA, find the magnitude of the maximum possible torque exerted on the coil.
Answer:
The maximum torque, τ = 3.67 × 10⁻³ Nm
Explanation:
The torque τ = NiABsinθ where N = number of turns of circular coil = 50.5, i = current in circular coil = 22.5 mA = 0.0225 A, A = area of circular coil = πr² where r = radius of circular coil = 4.75 cm = 0.0475 m, B = magnetic field strength = 0.455 T and θ = 90° for maximum torque.
So, τ = NiABsinθ
τ = Niπr²Bsinθ
τ = 50.5 × 0.0225 A × π × (0.0475 m)² × 0.455 T × sin90°
τ = 0.003665 Nm
τ = 3.665 × 10⁻³ Nm
τ ≅ 3.67 × 10⁻³ Nm
So the maximum torque, τ = 3.67 × 10⁻³ Nm
you walk 6 block east, 2 blocks north, 3 blocks west and then 2 blocks north. the total distance you travel is blocks
Answer:
The answerI travel 13 blocks