Anti coagulant usend in blood sampling
Answer:
Ethylenediaminetetraacetic acid (EDTA), heparin, and citrate are the most commonly used anticoagulants (39–41). pls mark me branilest
An atom has 15 protons and 14 Neutrons. What is the atomic number of this atom?
Answer:
Silicon
Explanation:
Therefore the isotope with 14 protons and 15 neutrons is Silicon-29.
An atom has 15 protons and 14 Neutrons. The atomic number of this atom is 14 and the element is silicon.
What is the atomic number?The atomic number of an element is its total number of protons or the total number of electrons. The atomic number is written down the element. It can be calculated by knowing the numbers of protons and electrons.
The element here is silicon, whose number of protons, electrons, and neutrons are equal, which is 14. These are the charged particles that are present in the atoms of the element.
The number of band protons is equal to an element. The atomic number will be its number of protons. The isotope with 14 protons and 15 neutrons is Silicon-29.
Thus, the atomic number of the element is 14 if it has 15 protons and 14 Neutrons. The element is silicon.
To learn more about an atomic number, refer to the link:
https://brainly.com/question/8834373
#SPJ2
In the laboratory, open-toed shoes and shorts:
a. Are potentially dangerous and should not be worn.
b. Are OK if the weather is hot.
c. Are all right if you are wearing a lab coat
d. Are OK if they are in style.
Answer:
a. Are potentially dangerous and should not be worn.
13. Find the total number of atoms present in the following molecules. a. 5 H₂O b. Zn Cl₂
Answer:
A= 15 atoms B= 3
Explanation:
5 x 2 + 5 x 1
3 + 2 x 1
An unknown element is a mixture of isotopes ¹²⁹X and ¹³²X. The average atomic mass of X is 131.01 amu. What is the percent abundance of ¹³²X?
Answer: 67%
Explanation: The weighted averages of the two isotopes must add to 131.01. Let Y be the percentage of isotope 129. Then (1-Y) will be the percentage of isotope 132. The weighted average of each is:
129: 129Y
132: 132(1-Y)
Their sum is equal to 131.01
129Y + 132(1-Y) = 131.01
Y = 0.33, or 33%
(1-Y) = 0.67, or 67%
Check: 129*(0.33) = 42.57
132*(0.67) = 88.44
Sum = 131.01 It checks OK The 132 isotopes is 67% of the sample.
Considering the definition of atomic mass, isotopes and atomic mass of an element, the percent abundance of ¹³²X is 67%.
Definition of atomic massFirst of all, the atomic mass (A) is obtained by adding the number of protons and neutrons in a given nucleus of a chemical element.
Definition of isotopeThe same chemical element can be made up of different atoms, that is, their atomic numbers are the same, but the number of neutrons is different. These atoms are called isotopes of the element.
Definition of atomic massOn the other hand, the atomic mass of an element is the weighted average mass of its natural isotopes. In other words, the atomic masses of chemical elements are usually calculated as the weighted average of the masses of the different isotopes of each element, taking into account the relative abundance of each of them.
Percent abundance of ¹³²XIn this case, you know:
An isotope has an atomic mass of 132 amu and a percent natural abundance of y.An isotope has an atomic mass of 129 amu and a percent natural abundance of 1-y. The average atomic mass of X is 131.01 amuThen, the average mass of X can be calculated as:
132 amu×y + 129 amu×( 1-y)= 131.01 amu
Solving, you can find the percent abundance of ¹³²X:
132 amu×y + 129 amu×1 - 129 amu×y= 131.01 amu
132 amu×y + 129 amu - 129 amu×y= 131.01 amu
132 amu×y - 129 amu×y= 131.01 amu - 129 amu
3 amu×y= 2.01 amu
y= 2.01 amu÷ 3 amu
y= 0.67= 67%
Finally, the percent abundance of ¹³²X is 67%.
Learn more about average atomic mass:
brainly.com/question/4923781?referrer=searchResults
brainly.com/question/1826476?referrer=searchResults
brainly.com/question/15230683?referrer=searchResults
brainly.com/question/7955048?referrer=searchResults
Which one of the following is NOT the unit of wave number:
m-1
cm-1
mm-1
cm
Answer:
e
Explanation:
cm is not the unit of wave number out of the following.
What is a wave number?Definition: Total number of wave cycles present in a unit distance is termed a wave number.
Wave number is always a reciprocal of the unit of distance.Wave number is denoted by the letter 'k'.The formula for wave number is 2π/λ where λ is the wavelength. Since wave number is always reciprocal, cm is not the unit for a wave number. The higher the wave number, the higher the frequency and energy.To learn more about wave number, refer to:
https://brainly.com/question/8304265
#SPJ2
Which term best describes the important pieces of information that scientists gather and record during an experiment?
conclusions
data
research
supplies
Answer:
conclusions i think i am not confirmed
Answer:
b-data
Explanation:
right on the unit test review on edge
brainliest???
7. What is ultraviolet radiation?
Answer:
Ultraviolet radiation is a form of electromagnetic radiation that comes from the sun.
What is the Molality of a solution prepared by dissolving 84.7 g of KMnO4 (potassium permanganate, an oxidizing agent) in 165 g of water?
a) 0.513 m
b) 11.3 m
c) 0.308 m
d) 3.25 m
e) 0.958 m
why is mitochondria called the power house of a cell ?
Answer:
Hey mate....
Explanation:
This is ur answer....
Mitochondria are tiny organelles inside cells that are involved in releasing energy from food. This process is known as cellular respiration. It is for this reason that mitochondria are often referred to as the powerhouses of the cell.
Hope it helps!
Brainliest pls!
Follow me! :)
Give reasons ,Argon is an inert gas.
Answer:
The outermost (valence) shell of argon has eight electrons, making it exceedingly stable and, thus, chemically inert. Argon atoms do not combine with one another; nor have they been observed to combine chemically with atoms of any other element.So argon is an inert gas
Answer:
because argon have 8 electrons in there outmost shell
which is enough to make it stable
Classify these compounds as acid, base, salt, or other. Drag the appropriate items to their respective bins.
HCOOH, CH3OH, NaOH, HNO3, NaBr, NH3, CO2, KCl
HCOOH is an acid, KCL is a Salt, NaOH is a base.
Acids Bases and SaltsAn acid is defined as a substance which when dissolved in water produces hydronium ion (H3O+), neutralizes bases, tastes sour and turns blue litmus red.
Acids incldes:
HCOOH-weak acidHNO3-Strong acidA Base is a substance which in its aqueous solution produces hydroxyl ions (OH–), neutralizes acids , tastes bitter and turns red litmus blue
Bases incldes:
NaOHNH3A Salt is an ionic compound produced from the neutralization reaction of acids and bases. it is neutral substance and has no effect on litmus.
NaBrKCLThe folloing can be classifed as other or in aqueous solution as :
CO2-acidic oxide, Bronsted lewis acid CH3OH -Bronsted-Lowry acidLearn more on acids base and salts here:https://brainly.com/question/2927542
What is true of an element that is oxidized?
It increased in electronegativity.
It decreased in electronegativity.
It gained electrons.
It lost electrons.
Answer:
When an element is oxidized, it loses electrons
Answer:
The last option is the correct answer.
Explanation:
When an element is oxidized, it loses electrons. But when an element is reduced, it gains electrons. This is the basis of redox reactions.
However, an oxidizing agent oxidizes something else, and gets reduced, therefore gaining electrons. Meanwhile, a reducing agent reduces something else, and gets oxidized in the process, losing its own electrons.
3.
Carlos is trying to figure out the best place to put his router in order to get the best
signal. Which is not an independent variable?
A. Distance from the router
B. Signal strength at the computer
OUTPU
C. The number of walls between the router and computer
STATIO
D. The number of devices on the router
Answer:
right answer is option no c
topic: Nomenclature and Formula Writing.
reward: up to 200 POINTS!
how?
...
Answer: Writing Formulas for Ionic Compounds Using Nomenclature Another important concept to master is the ability to write a chemical formula using the compound's systematic name.
Explanation:
13. Find the total number of atoms present in the following molecules. a. 5 H₂O b. Zn Cl₂
Please
Answer:
5H²O= 23
ZnCl²=135
have a great day
A hose delivers water to a swimming pool that measures 9.0 m long by 3.5 m wide by 1.75 m deep. It requires 97 h to fill the pool. At what rate in liters per minute will the hose fill the pool?
Answer:2
Explanation:
1-How does the Law of Conservation of Energy explain why ice cubes melt in water?
2-What are the two differences between mass and weight?
3-Why does an object’s weight change on the moon but its mass stays the same?
4-Explain how two objects that have the same mass can have different densities.
5-How can you tell if a mixture is homogeneous (solution) or heterogeneous (not a solution)?
6-Identify each of the following examples below as either a homogeneous mixture (solution) or a heterogeneous mixture.
7-What are 3 methods you can use to separate a mixture? Give an example of each.
8-What is the difference between an atom and a molecule?
9-Is a compound a mixture or a pure substance?
10-How are elements arranged on the Periodic Table? by increasing
atomic number.
Answer: 1.The water molecules in the liquid phase have more energy than the molecules in the solid phase. The reason that the ice melts is that some of the energy in the water is transferred to the ice – this provides the heat necessary for the transition from the solid to liquid phase
A student performs an experiment to determine the molar mass of magnesium oxide. The student repeats the experiment five times and collects the following data: 40.220gmol, 40.654gmol, 40.314gmol, 40.165gmol, and 40.554gmol. What is the relative standard deviation (RSD) for this set of data?
The relative standard deviation for the set of data obtained by the student is 0.470%
The formula for calculating the relative standard deviation is given below as:
Relative standard deviation (RSD) = (S * 100)/x
where S stands for the standard deviation and x is the mean of the data set.
The following are the steps to calculate to determine the relative standard deviation using the given formula:
Step 1: Calculate the mean of the numbers in the data set.
mean, x = sum of numbers / number of numbers
(40.220 + 40.654 + 40.314 + 40.165 + 40.554)/5
mean = 40.381 g/mol
Step 2: Subtract the mean from each number in the data to determine the deviation for each number and then square the deviations.
(40.220 - 40.381)² = 0.0259
(40.654 - 40.381)² = 0.0745
(40.314 - 40.381)² = 0.00449
(40.165 - 40.381)² = 0.0466
(40.554 -40.381)² = 0.0299
Step 3: Sum the squared deviations.
0.0259 + 0.0745 + 0.00449 + 0.0466 + 0.0299 = 0.181
Step 4: Determine the variance by dividing the sum of the squared deviations by the total number of values.
Variance = 0.181/5 = 0.0362
Step 6: Determine the standard deviation of the data by taking square root of the variance.
Standard deviation, S = √0.0362 = 0.190
Step 7: Determine the relative standard deviation by inserting the values in the formula, (RSD) = (S * 100)/x
RSD = (0.190 * 100)/40.381
RSD = 0.470%
Learn more at: https://brainly.com/question/475676
The distance of 24 km equals:
O 2.4x104 m
O 2.4x10-1 m
O 2.4x103 m
2.4x10-2 m
2.4x102 m
Answer:
2.4* 10⁴ m
Explanation:
1km = 1000m = 10³m
(1*24)km = 10³ * 24 m
=> 24km = 2.4 * 10⁴m
Please help ASAP!!!!!!!!
Answer:
the correct answer is option B batteries use chemicals to store energy
We have that the statement that remains true about batteries is
"Batteries use chemical to store energy "
Option B
-All battery are able to be recharged that is not correct as some batteries are non rechargeable
-A battery is a device composed of petrochemical cells, that rel sole upon the energy from chemical reactions to give off charge
-A battery is a device that is use to store energy. Therefore Batteries to not conserve energy
Hence the statement that remains true about batteries is
"Batteries use chemical to store energy "
Option B
For more information on this visit
https://brainly.com/question/16397310?referrer=searchResults
Select the arrangement that orders the compounds by increasing boiling point based on predominant intermolecular force. Please choose the correct answer from the following choices, and then select the submit answer button. Answer choices N2 < CO2 < NH3 < HF
The arrangement that orders the compounds by increasing boiling point based on predominant intermolecular force is; N2 < CO2 < NH3 < HF
The molecules that compose a substance are held together by intermolecular forces. The physical properties of a substance such as boiling points depends on the nature of intermolecular forces between substances. The greater the magnitude of intermolecular interaction between bonding atoms the higher the boiling point.
Nitrogen and CO2 molecules are only held together by weak dispersion forces. However, CO2 has a higher boiling point than N2 because CO2 has a higher molecular mass than N2.
Nitrogen is less electronegative than fluorine hence the magnitude intermolecular interaction via hydrogen bonding in HF is greater than that in NH3 consequently, the boiling point of HF is higher than that of NH3.
Learn more; https://brainly.com/question/9007693
A cylinder fitted with a movable piston and filled with a gas has a volume of 188.5mL at 26.7 °C when the applied pressure is 755.2 torr. The temperature of the oil bath surrounding the cylinder was increased to 165.2 °C, and the load on the piston was changed. Careful measurement now gave a value of 210.5mL for the volume. What was the final pressure in the system, in torr? Select one:
O a. 715.5 tor O b. 576.9 torr Oc. 988 6 torr O d. 1233 torr 462.6 tor
Answer:
C
Explanation:
To find the new pressure, we will use this formula: P₁V₁/T₁ = P₂V₂/T₂
P₁ = Original pressure (755.2)
V₁ = Original volume (188.5)
T₁ = Original temperature in kelvins (26.7 + 273.15 = 299.85)
P₂ = Final Volume (?)
V₂ = Final volume (210.5)
T₂ = Final temperature in kelvins (165.2 + 273.15 = 438.35)
Here is our equation
(755.2)(188.5)/(299.85) = (210.5)P₂/(438.35)
Hopefully, you have a calculator handy because this equation will end up looking like this:
474.75471 = (0.48021)P₂
Divide both sides by the coefficient
474.75471/0.48021 = (0.48021)P₂/0.48021
P₂ = 988.64
2. State a common metric unit and symbol obtained from each of the following instruments.
(a) metric ruler
(b) balance
(c) graduated cylinder
(d) thermometer
Answer:
cm
Explanation:
for short measurements
An unknown compound has the following chemical formula: where stands for a whole number. Measurements also show that a certain sample of the unknown compound contains of magnesium and of chlorine. Write the complete chemical formula for the unknown compound.
Answer: This is only a guess: The "following chemical formula: " doesn't appear on my screen. But since you mentioned Mg and Cl, I would guess MgCl2
Explanation: Mr loses 2 electrons while each Cl gains one each: Two chlorines for every 1 magnesium.
20,000 $ give a way but answer this first
Plz
12.Write the basis of naming of the following elements. 1.Neptunium,2.Mendelevium,
Answer:juhygjdkeExplanation:
Mendelevium is named for Dmitri Mendeleev who produced one of the first periodic tables.
Abelson first found neptunium in 1940 after uranium had been bombarded by neutrons from the cyclotron at Berkeley, California. ... The element was named after the planet Neptune, which is the first planet beyond Uranus.
Answer in explanation
Explanation:
neptunium was named after the discovery of the planet neptune in september 23 1846
mendelevium was named as dimitri mendeleev
How does a hypothesis differ from a scientific theory? (1 point)
O Hypotheses can change with new evidence, but theories remain constant.
O Theories always lead to the development of new scientific ideas.
o Hypotheses are testable, while theories only exist conditionally.
o Theories are well established with lots of evidence to support their claims.
Answer:
the answer is actually D. (theories are well established with lots of evidence to support their claims)
Explanation:
i just took the quiz
A hypothesis is a presented reason for a phenomenon based on limited proof and evidence. A scientific theory is an elucidation of an element that has been constantly experimented with and confirmed per scientific approach.
Theories are well established with lots of proof to back their assertions.
What is the difference between the theory and hypothesis?Scientific theories are established based on the evidence and repetitive experimental procedures to prove and establish them correctly.Theories can change over time as new supporting evidence are found or new procedures are established to amend the old theory.A scientific theory recapitulates a hypothesis that has been reinforced with repeated experiments and observations.A hypothesis should be an instinctive justification or the potential correlation that lies between several phenomena and depends on the scientific theory.Therefore, option D is correct.
Learn more about theory and hypothesis here:
https://brainly.com/question/14691306
Why is it important to use chemicals of high quality (purity) and exact(correct) concentrations in experiments?
Answer:
To produce good or targeted result
It is important to use chemicals of high quality and correct concentrations in experiment so that we can obtain the predictable result in an experiment
Purity of substances/chemicals is very important when performing experiments in the laboratories, because it plays an important role in the determination of the chemical properties of substances which will have a direct effect on the result obtained from the experiment. likewise using the correct concentration of reagents
During experiments to obtain the best/predictable result in an experiment it is of best practice to make use of chemicals of high quality and also at the exact(needed) concentrations, that way the predictable result of the experiment will be obtained.
Learn more : https://brainly.com/question/8684258
We are driving to Orlando. The sign says
that it is 145 kilometers to Orlando.
How many meters is it to Orlando?
A: 0.145
B: 145,000
C: 14.5
D: 14,500
Answer:
b
Explanation:
there is 1000m in 1 km so the ans is literally just 145x1000 m which is 145000m
Answer:
B! 145,000
Explanation:
your welcome love!
what is a characteristic of matter that allows it to change to something new? THE CORRECT ANSWER GETS BRAINLIEST!!!!
Answer:
a chemical property
Explanation:
