Answer:
The amount of heat required to boil away 1 kg of water is 10 times the amount of heat required to melt 1 kg of ice
Explanation:
let the latent heat of fusion of ice = L
then, the latent heat of vaporization of water = 10L
The heat of fusion of 1 kg of ice = 1 x L = L
The heat of vaporization 1 kg of water = 1 x 10L = 10L
Therefore, the amount of heat required to boil away 1 kg of water is 10 times the amount of heat required to melt 1 kg of ice
Calculate the rms speed of helium atoms near the surface of the Sun at a temperature of about 5100 K. Express your answer to two significant figures and include the appropriate units.
Answer:
[tex]V_{rms}=5.6*10^3m/s[/tex]
Explanation:
From the question we are told that:
Temperature [tex]T=5100K[/tex]
Generally the equation for RMS Speed is mathematically given by
[tex]V_{rms}=\sqrt{\frac{3kT}{m}}[/tex]
Where
[tex]K=Boltzman's constant[/tex]
[tex]K=1.38*10^{-23}[/tex]
And
[tex]M=molecular mass[/tex]
[tex]M=4*1.67*10^{-27}[/tex]
[tex]V_{rms}=\sqrt{\frac{3(1.38*10^{-23})5100}{4*1.67*10^{-27}}}[/tex]
[tex]V_{rms}=5.6*10^3m/s[/tex]
Give the missing ammeter reading a and b. suggest why more current flow through some bulbs than through others Grade 10 question and Answer
Answer:
becaude of electricity
plz answer the question
Answer:
Ray A = Incidence ray
Ray B = Reflected ray
Explanation:
From the law of reflection,
Normal: This is the line that makes an angle of 90° with the reflecting surface.
Ray A is the incidence ray: This is the ray that srikes the surface of a reflecting surface. The angle formed between the normal and the incidence ray is called the incidence angle
Ray B is the reflected ray: This is the ray leaves the surface of a reflecting surface. The angle formed between the reflected ray and the normal is called reflected angle
LC-circuit of the radio receiver consists of variable capacitor (Cmin= 1 pF, Cmax=10 pF) and inductor
with inductance 1 µH. Determine the wavelength range of this radio receiver.
Answer:
the radio can tune wavelengths between 1.88 and 5.97 m
Explanation:
The signal that can be received is the one that is in resonance as the impedance of the LC circuit.
X = X_c - X_L
X = 1 / wC - w L
at the point of resonance the two impedance are equal so their sum is zero
X_c = X_L
1 / wC = w L
w² = 1 / CL
w = [tex]\sqrt{\frac{1}{CL} }[/tex]
let's look for the extreme values
C = 1 10⁻¹² F
w = [tex]\sqrt{\frac{1}{ 1 \ 10^{-12} \ 1 \ 10^{-6}} }[/tex]
w = [tex]\sqrt{1 \ 10^{18}}[/tex]
w = 10⁹ rad / s
C = 10 10⁻¹² F
w = [tex]\sqrt{\frac{1}{10 \ 10^{-12} \ 1 \ 10^{-6}} }[/tex]Ra 1/10 10-12 1 10-6
w = [tex]\sqrt{0.1 \ 10^{18}}[/tex]Ra 0.1 1018
w = 0.316 10⁹ rad / s
Now the angular velocity and the frequency are related
w = 2π f
f = w / 2π
the light velocity is
c = λ f
λ = c / f
we substitute
λ = c 2π/w
we calculate the two values
C = 1 pF
λ₁ = 3 10⁸ 2π / 10⁹
λ₁= 18.849 10⁻¹ m
λ₁ = 1.88 m
C = 10 pF
λ₂ = 3 10⁸ 2π / 0.316 10⁹
λ₂ = 59.65 10⁻¹ m
λ₂ = 5.97 m
so the radio can tune wavelengths between 1.88 and 5.97 m
If you drive first at 40 km/h west and later at 60 km/h west, your average velocity is 50 km/h west.
and what else? is that all?
g Calculate the final speed of a solid cylinder that rolls down a 5.00-m-high incline. The cylinder starts from rest, has a mass of 0.750 kg, and has a radius of 4.00 cm.
Answer:
[tex]V=8.08m/s[/tex]
Explanation:
From the question we are told that:
Height[tex]h=5.00m[/tex]
Mass [tex]m=0.750kg[/tex]
Radius [tex]r=4.00cm=>0.04m[/tex]
Generally the equation for Total energy is mathematically given by
[tex]mgh=\frac{1}{2}mv^2+\frac{1}{2}Iw^2[/tex]
Therefore
[tex]V=\sqrt{\frac{4gh}{3}}[/tex]
[tex]V=\sqrt{\frac{4*9.8*5}{3}}[/tex]
[tex]V=8.08m/s[/tex]
Two children stretch a jump rope between them and send wave pulses back and forth on it. The rope is 3.3 m long, its mass is 0.52 kg, and the force exerted on it by the children is 47 N. (a) What is the linear mass density of the rope (in kg/m)
Answer:
The linear mass density of rope is 0.16 kg/m.
Explanation:
mass, m = 0.52 kg
force, F = 47 N
length, L = 3.3 m
(a) The linear mass density of the rope is defined as the mass of the rope per unit length.
Linear mass density = m/L = 0.52/3.3 = 0.16 kg/m
If the loading is 0.4, the coinsurance rate is 0.2, the number of units of medical care is 100, and the number of units of medical care is 1. What is the premium of this insurance?
Answer:
72 is the premimum of the insurance.
Explanation:
Below is the given values:
The loading = 0.4
Coinsurance rate = 0.2
Number of units = 100
Total number of units = 100 * 0.4 = 40
Remaining units = 60 * 0.2 = 12
Add the 60 and 12 values = 60 + 12 = 72
Thus, 72 is the premimum of the insurance.
Which of the following elements has the largest atomic radius?
Silicon
Aluminum
Sulfur
Phosphorous
Answer:
francium
Atomic radii vary in a predictable way across the periodic table. As can be seen in the figures below, the atomic radius increases from top to bottom in a group, and decreases from left to right across a period. Thus, helium is the smallest element, and francium is the largest.
what is the frequency of a wave related to
Answer:
Frequency is the number of complete oscillations or cycles or revolutions made in one second.
An investigator collects a sample of a radioactive isotope with an activity of 490,000 Bq.48 hours later, the activity is 110,000 Bq. Part A For the steps and strategies involved in solving a similar problem, you may view a Video Tutor Solution What is the half-life of the sample?
Answer:
The correct answer is "22.27 hours".
Explanation:
Given that:
Radioactive isotope activity,
= 490,000 Bq
Activity,
= 110,000 Bq
Time,
= 48 hours
As we know,
⇒ [tex]A = A_0 e^{- \lambda t}[/tex]
or,
⇒ [tex]\frac{A}{A_0}=e^{-\lambda t}[/tex]
By taking "ln", we get
⇒ [tex]ln \frac{A}{A_0}=- \lambda t[/tex]
By substituting the values, we get
⇒ [tex]-ln \frac{110000}{490000} = -48 \lambda[/tex]
⇒ [tex]-1.4939=-48 \lambda[/tex]
[tex]\lambda = 0.031122[/tex]
As,
⇒ [tex]\lambda = \frac{ln_2}{\frac{T}{2} }[/tex]
then,
⇒ [tex]\frac{ln_2}{T_ \frac{1}{2} } =0.031122[/tex]
⇒ [tex]T_\frac{1}{2}=\frac{ln_2}{0.031122}[/tex]
[tex]=22.27 \ hours[/tex]
A child throws a ball vertically upward to a friend on a balcony 28 m above him. The friend misses the ball on its upward flight but catches it as it is falling back to earth. If the friend catches the ball 3.0 s after it is thrown, at what time did it pass him on its upward flight
Answer:
[tex]t=1.9 sec[/tex]
Explanation:
From the question we are told that:
Height [tex]h=28m[/tex]
Time [tex]t=3s[/tex]
Generally the Newton's equation for Initial velocity upward is mathematically given by
[tex]s=ut+\frtac{1}{2}at^2[/tex]
[tex]28=3u-\frac{1}{2}*9.8*3^2[/tex]
[tex]u=24.03m/s[/tex]
Generally the velocity at elevation and depression occurs as ball arrives and passes through S=28
[tex]v=\sqrt{24.03-2*9.8*28}[/tex]
[tex]v=5.35m/s and -5.35m/s[/tex]
Generally the Newton's equation for time to reach initial velocity is mathematically given by
[tex]v=u+at[/tex]
[tex]5.35=24.03-9.8t[/tex]
[tex]t=\frac{28.03-5.35}{9.8}[/tex]
[tex]t=1.9 sec[/tex]
A car is stopped for a traffic signal. When the light turns green, the car accelerates, increasing its speed from zero to 9.41 m/s in 4.24 s. What is the magnitude of the linear impulse experienced by a 67.0 kg passenger in the car during this time
Answer:
the impulse experienced by the passenger is 630.47 kg
Explanation:
Given;
initial velocity of the car, u = 0
final velocity of the car, v = 9.41 m/s
time of motion of the car, t = 4.24 s
mass of the passenger in the car, m = 67 kg
The impulse experienced by the passenger is calculated as;
J = ΔP = mv - mu = m(v - u)
= 67(9.41 - 0)
= 67 x 9.41
= 630.47 kg
Therefore, the impulse experienced by the passenger is 630.47 kg
An object with mass m = 0.56 kg is attached to a string of length r = 0.72 m and is rotating with an angular velocity ω = 1.155 rad/s. What is the centripetal force acting in the object?
Answer:
The centripetal force is 0.54 N.
Explanation:
mass, m = 0.56 kg
radius, r = 0.72 m
angular speed, w = 1.155 rad/s
The centripetal force is given by
[tex]F = m r w^2\\\\F =0.56\times 0.72\times 1.155\times 1.155\\\\F = 0.54 N[/tex]
why material selection is important to design and manufacturing?
Answer:
. You want your product to be as strong and as long lasting as possible. There are also the safety implications to consider. You see, dangerous failures arising from poor material selection are still an all too common occurrence in many industries. yep that the answer have a Great day
Explanation:
(◕ᴗ◕✿)
A lens with a focal length of 15 cm is placed 45 cm in front of a lens with a focal length of 5.0 cm .
Required:
How far from the second lens is the final image of an object infinitely far from the first lens?
Answer:
the required distance is 6 cm
Explanation:
Given the data in the question;
f₁ = 15 cm
f₂ = 5.0 cm
d = 45 cm
Now, for first lens object distance s = ∝
1/f = 1/s + 1/s' ⇒ 1/5 = 1/∝ + 1/s'
Now, image distance of first lens s' = 15cm
object distance of second lens s₂ will be;
s₂ = 45 - 15 = 30 cm
so
1/f₂ = 1/s₂ + 1/s'₂
1/5 = 1/30 + 1/s'₂
1/s'₂ = 1/5 - 1/30
1/s'₂ = 1 / 6
s'₂ = 6 cm
Hence, the required distance is 6 cm
The distance of the final image from the first lens will be is 6 cm.
What is mirror equation?The mirror equation expresses the quantitative connection between object distance (do), image distance (di), and focal length (fl).
The given data in the problem is;
f₁ is the focal length of lens 1= 15 cm
f₂ s the focal length of lens 2= 5.0 cm
d is the distance between the lenses = 45 cm
From the mirror equation;
[tex]\frac{1}{f} = \frac{1}{s} +\frac{1}{s'} \\\\ \frac{1}{5} = \frac{1}{\alpha} +\frac{1}{s'} \\\\[/tex]
If f₁ is the focal length of lens 1 is 15 cm then;
[tex]s'=15 cm[/tex]
f₂ s the focal length of lens 2= 5.0 cm
s₂ = 45 - 15 = 30 cm
From the mirror equation;
[tex]\frac{1}{f_2} = \frac{1}{s_1} +\frac{1}{s_2'} \\\\ \frac{1}{5} = \frac{1}{30} +\frac{1}{s_2'} \\\\ \frac{1}{s_2'}= \frac{1}{5} -\frac{1}{30} \\\\ \frac{1}{s_2'}= \frac{1}{6} \\\\ \rm s_2'= 6 cm[/tex]
Hence the distance of the final image from the first lens will be is 6 cm.
To learn more about the mirror equation refer to the link;
https://brainly.com/question/3229491
When two bodies at different temperatures are placed in thermal contact with each other, heat flows from the body at higher temperature to the body at lower temperature until them both acquire the same temperature. Assuming that there is no loss of heat to the surroundings, the heatSingle choice.
(1 Point)
(a) gained by the hotter body will be equal to the heat lost by the colder body
(b) the heat gained by the hotter body will be less than the heat lost by the colder body
(c) the heat gained by the hotter body will be greater than the heat lost by the colder body
(d) the heat lost by the hotter body will be equal to the heat gained by the colder body.
Answer:
Part d is correct.
Pete is investigating the solubility of salt (NaCl) in water. He begins to add 50 grams of salt to 100 grams of
room temperature tap water in a beaker. After adding all of the salt and stirring for several minutes, Pete
notices a solid substance in the bottom of the beaker. Which statement best explains why there is a solid
substance in the bottom of the beaker?
A. The salt he is using is not soluble in water.
B. The salt is changing into a new substance that is not soluble in water,
C. The dissolving salt is causing impurities in the water to precipitate to the bottom
D. The water is saturated and the remaining salt precipitates to the bottom
Answer:
would the answer be c
Explanation: that what i think in my opian
Answer:
A
Explanation:
Hai điện tích điểm Q1 = 8 C, Q2 = –6
C đặt tại hai điểm A, B cách nhau 0,1
m trong không khí. Tính cường độ điện
trường do hai điện tích này gây ra tại
điểm M, biết MA = 0,2 m
Answer:
English please
Explanation:
I don't understand the question
what change occurs to the mass of an object when a unbalanced
Answer:
The mass decreases
Explanation:
Just smart
which of the following is a correct statement. a. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are constant. b. In dc steady state conditions, the voltages across the capacitors are zero and the currents through the capacitance are constant. The current through the inductors are constant and the voltage across the inductances are zero. c. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are zero and the voltage across the inductances are constant. d. WIn dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
Answer:
d. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
Explanation:
The current through a capacitor is given by i = CdV/dt where C = capacitance of capacitor and V = voltage across capacitor. At steady state dV/dt = 0 and V = constant. So, i = CdV/dt = C × 0 = 0.
So, in dc steady state, the voltage across a capacitor is constant and the current zero.
The voltage across an inductor is given by V = Ldi/dt where L = inductance of inductor and i = current through inductor. At steady state di/dt = 0 and V = constant. So, V = Ldi/dt = L × 0 = 0.
So, in dc steady state, the voltage across an inductor is zero and the current constant.
So, In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
The answer is d.
A helicopter is ascending vertically witha speed of 5.40 m/s. At a height of 105 m above the earth a package is dropped from the helicopter. How much time does is take for the package to reach the ground
Answer: 5.21 s
Explanation:
Given
Helicopter ascends vertically with [tex]u=5.4\ m/s[/tex]
Height of helicopter [tex]h=105\ m[/tex]
When the package leaves the helicopter, it will have the same vertical velocity
Using equation of motion
[tex]\Rightarrow h=ut+\dfrac{1}{2}at^2\\\\\Rightarrow 105=-5.4t+0.5\times 9.8t^2\\\Rightarrow 4.9t^2-5.4t-105=0\\\\\Rightarrow t=\dfrac{5.4\pm \sqrt{5.4^2+4\times 4.9\times 105}}{2\times 4.9}\\\\\Rightarrow t=\dfrac{5.4\pm 45.68}{9.8}\\\\\Rightarrow t=5.21\ s\quad \text{Neglect negative value}[/tex]
So, package will take 5.21 s to reach the ground
Two identical loudspeakers 2.0 m apart are emitting sound waves into a room where the speed of sound is 340 m/sec. John is standing 5.0m in front of one of the speakers, perpendicular to the line joining the speakers, and hears a maximum in the intensity of the sound. What is the lowest possible frequency of sound for which this is possible?
Answer: The lowest possible frequency of sound for which this is possible is 212.5 Hz.
Explanation:
It is known that formula for path difference is as follows.
[tex]\Delta L = (n + \frac{1}{2}) \times \frac{\lambda}{2}[/tex] ... (1)
where, n = 0, 1, 2, and so on
As John is standing perpendicular to the line joining the speakers. So, the value of [tex]L_{1}[/tex] is calculated as follows.
[tex]L_{1} = \sqrt{(2)^{2} + (5)^{2}}\\= 5.4 m[/tex]
Hence, path difference is as follows.
[tex]\Delta L = (5.4 - 5) m = 0.4 m[/tex]
For lowest frequency, the value of n = 0.
[tex]\Delta L = (0 + \frac{1}{2}) \times \frac{\lambda}{2} = \frac{\lambda}{4}[/tex]
[tex]\lambda = 4 \Delta L[/tex]
where,
[tex]\lambda[/tex] = wavelength
The relation between wavelength, speed and frequency is as follows.
[tex]\lambda = \frac{\nu}{f}\\4 \Delta L = \frac{\nu}{f}\\[/tex]
where,
[tex]\nu[/tex] = speed
f = frequency
Substitute the values into above formula as follows.
[tex]f = \frac{\nu}{4 \Delta L}\\f = \frac{340}{4 \times 0.4 m}\\= 212.5 Hz[/tex]
Thus, we can conclude that the lowest possible frequency of sound for which this is possible is 212.5 Hz.
Copy the diagram. add a voltmeter to show how you would measure the voltage of the cell
Answer: the answer is 23voltage
Explanation: because the voltage and time put together is 23
One way families influence healthy technology use is when siblings explain the use of media to each other. Which of these outfits would you expect if this guideline was followed?
Answer:
The answer would be C.
Explanation:
This is what I would expect when you show someone else how to do something then is also known as teaching.
Please Mark as Brainliest
Hope this Helps
Your car breaks down in the middle of nowhere. A tow truck weighing 4000 lbs. comes along and agrees to tow your car, which weighs 2000 lbs., to the nearest town. The driver of the truck attaches his cable to your car at an angle of 20 degrees to horizontal. He tells you that his cable has a strength of 500 lbs. He plans to take 10 secs to tow your car at a constant acceleration from rest in a straight line along a flat road until he reaches the maximum speed of 45 m.p.h. Can the driver carry out the plan
Answer:
F = 1010 Lb
the tension on the cable is greater than its resistance, which is why the plan is not viable
Explanation:
For this exercise we can use the kinematic relations to find the acceleration and with Newton's second law find the force to which the cable is subjected.
v = v₀ + a t
how the car comes out of rest v₀ = 0
a = v / t
let's reduce to the english system
v = 45 mph (5280 ft / 1 mile) (1h / 3600) = 66 ft / s
let's calculate
a = 66/10
a = 6.6 ft / s²
now let's write Newton's second law
X axis
Fₓ = ma
with trigonometry
cos 20 = Fₓ / F
Fₓ = F cos 20
we substitute
F cos 20 = m a
F = m a / cos20
W = mg
F = [tex]\frac{W}{g} \ \frac{a}{cos 20}[/tex]
let's calculate
F = [tex]\frac{2000}{32} \ \frac{6.6 }{cos20}[/tex](2000/32) 6.6 / cos 20
F = 1010 Lb
Under these conditions, the tension on the cable is greater than its resistance, which is why the plan is not viable.
help asap PLEASE I will give u max everything all that
steps if possible
Explanation:
2. [tex]R_T = R_1 + R_2 + R_3 = 625\:Ω + 330\:Ω + 1500\:Ω[/tex]
[tex]\:\:\:\:\:\:\:= 2455\:Ω = 2.455\:kΩ[/tex]
3. Resistors in series only need to be added together so
[tex]R_T = 8(140\:Ω) = 1120\:Ω = 1.12\:kΩ[/tex]
nariz (am
miria amy
0 = 0 +260 + (0)
U= 29 mb
6= ut +1 (04)
Car I was sitting at rest when it nous hit from
the rear by car 2 of identical mass. Both cant had
their heaks on and they stidled together Guy
in the original directioned of motion. If the stopping
force is notx (Combined weight of the cars), die
u=0 to find the approximate speed of car a just
before the collision took place on
Answer:
33 mph
Explanation:
My best guess
E=kq/r^2 chứng minh điện thế V=kq/r từ mối liên hệ giữa điện trường E và điện thế V
Answer:
hindi ko maintindihan teh
A girl and her bicycle have a total mass of 40.0 kg. At the top of the hill her speed is 5.0 m/s, and her speed doubles as she rides down the hill. The hill is 10.0 m high and 100 m long. How much kinetic energy and potential energy is lost to friction
Answer:
The kinetic energy and potential energy lost to friction is 2,420 J.
Explanation:
Given;
total mass, m = 40 kg
initial velocity of the girl, Vi = 5 m/s
hight of the hill, h = 10 m
length of the hill, L = 100 m
initial kinetic energy of the girl at the top hill:
[tex]K.E_{i} = \frac{1}{2} mv_i^2 = \frac{1}{2} \times 40 \times (5)^2\\\\K.E_{i} = 500 \ J[/tex]
initial potential energy of the girl at the top hill:
[tex]P.E_{i} = mgh_i = 40 \times 9.8 \times 10\\\\P.E_{i}= 3920 \ J[/tex]
Total energy at the top of the hill:
E = 500 J + 3920 J
E = 4,420 J
At the bottom of the hill:
final velocity = double of the initial velocity = 2 x 5 m/s = 10 m/s
hight of the hill = 0
final kinetic energy of the girl at the bottom of the hill:
[tex]K.E_{f} = \frac{1}{2} mv_f^2 \\\\K.E_f = \frac{1}{2} \times 40 \times (10)^2 = 200 0 \ J[/tex]
final potential energy of the girl at the bottom of the hill:
[tex]P.E_f = mgh_f = 40 \times 9.8 \times 0 = 0[/tex]
Based on the principle of conservation of energy;
the sum of the energy at the top hill = sum of the energy at the bottom hill
The energy at the bottom hill is less due to energy lost to friction.
[tex]E_{friction} \ + E_{bottom}= E_{top}\\\\E_{friction} = E_{top} - E_{bottom}\\\\E_{friction} = 4,420 \ J - 2,000 \ J\\\\E_{friction} = 2,420 \ J[/tex]
Therefore, the kinetic energy and potential energy lost to friction is 2,420 J.
