the mass of a mixture containing both rice and navy beans was found to be 143.85 g. the rice grains were separated from the navy beans by putting the mixture through a large strainer (the small rice grains fell through the holes, the larger navy beans did not). the mass of the rice that separated out was 4.65 g. use the results of the above experiment to estimate the number of rice grains and navy beans in the mixture.

The primary application of Benedict's test is to detect the presence of simple carbohydrates in an unidentified analyte.

Answer:

!

Benedict test is commonly done to detect

A chemical substance, pharmaceutical, and dietary supplement all refer to potassium iodide. A metal halide made of potassium and iodide with expectorant and thyroid-protecting effects is known as potassium iodide.

The potassium cation (K+) and the iodide anion form an ionic connection in the metal-halide salt known as potassium iodide (I–). It appears as cubical crystals, powder, or white granules and ranges in colour from colourless to white. It tastes quite salty and unpleasant. Iodine and potassium hydroxide are mixed to create this chemical.

Compounds contain elements in predetermined ratios.

Each compound has a certain set of characteristics.

Only chemical breakdown can separate compounds.

Compound particles only come in one type.

They are all the same, or homogenous.

To learn more about potassium please click on below link

https://brainly.com/question/13321031

#SPJ4

First we understand about main physical properties of minerals which helps in identification of common minerals.

Habit: Used to classify minerals into categories such as Cubic, Rectangular, Bladed, Prismatic, Longer, etc. depending on their shape.

Hardness: The hardness is used to identify a type of mineral based on their hardness on the Moh's scale of hardness (ranges from 0-10). In order to do this, an unknown type of mineral is scratched with a substance or mineral with a known hardness level and then referenced with the Moh's scale of hardness in order to identify the mineral.

Tenacity: Tenacity is used to identify minerals by measuring how resistant they are to being bent, crushed, or broken.

Density: The density of a mineral is determined by comparing the mass of the mineral to the volume of the mineral.

Color: The color that the particular mineral displays is used to identify it.

Luster: This a reflection property of a mineral towards light incident on it's surface as after reflection how it appears by reflection of light

Learn more about minerals:

brainly.com/question/18078524

#SPJ4

The correct answer to the given question about kinetic and potential energy is option d)  0 J to 4 J

The energy an object has as a result of motion is referred to as kinetic energy. The amount of effort needed to move a mass-based body from rest to the given velocity is how it is defined. Unless its speed changes, the body retains the kinetic energy it gained during acceleration. The same amount of labor is used up when the body slows down from its current speed to a state of rest. Any term in the Lagrangian of a system that has a derivative with respect to time is formally referred to as kinetic energy. The English unit of kinetic energy is the foot-pound, but the joule is the standard unit.

Question

Ali rolled a ball down a hill. This graph shows the kinetic and potential energy of the moving ball.

A line graph The graph is titled Mechanical Energy and shows an inverse relationship between Potential energy and Kinetic Energy. The Y axis is Potential energy (J). The X axis is Kinetic energy (J). The point of the graph are as such: (0, 5); (1, 4); (2, 3); (3, 2); (4, 1); (5, 0)

According to the graph, what is the mechanical energy of the ball?

A. 0 J

B. 5 J

C. 20 J to 25 J

D. 0 J to 4 J

To learn more about kinetic energy click here

brainly.com/question/26472013

#SPJ4

The complete balanced half-cell reaction is as follows:

Mg(s)+PdSO4(aq)---->MgSO4(aq)+Pd(s)

S1 solution= MgSO4 (magnesium sulfate) and S2 solution= PdSO4 (Palladium (II) sulfate)

A chemical reaction that takes place between an oxidizing substance and a reducing substance. The oxidizing substance loses electrons in the reaction, and the reducing substance gains electrons. Oxidation numbers, which are assigned to atoms in molecules by assuming that all bonds to the atoms are ionic. An increase in oxidation number during a reaction corresponds to oxidation, while a decreases corresponds to reduction.

Cathode: Pd^2+(aq)+2e- ---> Pd(s)

At cathode, reduction (gain of e- ) occurs.

At anode: Mg(s) ----> Mg^2+(aq)+2e-

Anode, oxidation (loss of e-) occurs

E1= Mg; (as left side of cell is anode)

E2= Pd; (as right side of cell is cathode)

S1 solution= MgSO4 (magnesium sulfate)

S2 solution= PdSO4 (Palladium (II) sulfate)

To learn more oxidation number check the link below:

https://brainly.com/question/27239694

#SPJ4

Certain types of cancer treatment involve chemicals that disrupt the formation of microfilaments. such chemicals most likely interfere with the Formation of the mitotic spindle.

Chemotherapeutic drugs target cells in various stages of the cell cycle. Understanding how these drugs work helps doctors predict which drugs work well together. Physicians can also plan the frequency of administration of each drug based on cell-phase timing.

Drugs that inhibit mitosis appear to act through a common mechanism of suppressing microtubule dynamics and killing tumor cells. Paclitaxel and vinca alkaloids are the first class of antimitotic agents discovered to inhibit cancer cell growth. Microtubules residing in the cytoplasm begin to depolymerize more rapidly as cells pass through prophase.

Learn more about Cancer treatment here:- https://brainly.com/question/12826495

#SPJ4

C

A covalent bond occurs when atoms share one or more pairs of electrons to form a stable molecule. The difference in electronegativity between two atoms plays a role in determining the type of bond formed between them. In general, covalent bonds are formed between atoms with similar electronegativities.

A covalent bond can form between two atoms if the electronegativity difference between them is less than 1.7. However, the size of the atoms is not the determining factor in covalent bond formation. Instead, the atomic electron distribution and electron affinity are very important.

In general, covalent bonding is a key process in chemistry that allows atoms to form stable bonds with each other. It is a key factor in determining the properties of various chemical compounds such as gases, liquids and solids.

Read more about this on brainly.com/question/23733409

#SPJ4

Make note of the fact that the gas with the lowest molar mass, helium, has the greatest molecular speeds, while the gas with the highest molar mass, xenon, has the lowest.

The average speed and kinetic energy of the gas molecules increase as the temperature rises. If the volume is maintained constant, the faster gas molecules collide with the container walls more frequently and more violently, increasing the pressure. In a gas, the speed of the molecules is inversely related to the molar mass of the gas and inversely proportional to temperature. In other words, as the temperature of a gas sample rises, the molecules become faster, and as a result, the root mean square of the molecular speed rises.

Learn more about molecular here-

https://brainly.com/question/4505951

#SPJ4

A. The units remaining after the conversion is mi

B. The units remaining after the conversion is atoms

A. How do I determine the units remaining?

From the question given above, the following expression was obtained:

To know the unit that will remain, we shall simplify the expression. Details below:

in × (ft/in) × (mi/ ft)

Cancel out in

ft × (mi/ ft)

Cancel out ft

mi

Thus, the unit remaining is mi

B. How do I determine the units remaining?

From the question given above, the following expression was obtained:

To know the unit that will remain, we shall simplify the expression. Details below:

g × (mol/g) × (atoms/ mol)

Cancel out g

mol × (atoms/ mol)

Cancel out mol

atoms

Thus, the unit remaining is atoms

Learn more about units conversion:

https://brainly.com/question/19420601

#SPJ1

Answer:

Explanation:

TERTIARY ALCOHOL:

The alcohols where the carbon to which the hydroxide group is linked is 3 ' C carbon, as it has 3 alkyl groups attached to it.

TERTIARY COMPOUND:

A carbon attached to 3 other carbons is tertiary compound.

In this question we are asked to fill up the blank in the following statement:

The reaction between cesium metal and chlorine gas is a ___ reaction. on the other hand, the reaction between ammonia and vinegar is a____ reaction and the one between sodium iodide and lead(ii) perchlorate is a ____ reaction.

So, the statement becomes:

The reaction between cesium metal and chlorine gas is a Redox reaction reaction.

On the other hand, the reaction between ammonia and vinegar is a Acid Base Reaction, and

The one between sodium iodide and lead(ii) perchlorate is a  Precipitation Reaction..

To know more Chemical Reaction:

brainly.com/question/29039149

#SPJ4

The structure of the Copper(1) hypochlorite is ClCuO.

We know that the chemical formula has to do with the way that we are able to show the compound or indeed any other chemical specie on paper. In this case we have the compound that has been shown as Copper(1) hypochlorite.

It should be known that in the IUPAC nomenclature, the name of the compound must be such that we can be able to write the structure of the compound from the name of the compound. This is applied in writing the structure of any compound.

Learn more about structure of a compound:https://brainly.com/question/29165067

#SPJ1

Answer: True. The primary distinction between chemical reactions and nuclear reactions is that chemical reactions involve the flow of electrons, while nuclear reactions involve changes to protons and neutrons. In chemical reactions, atoms form new bonds with other atoms by gaining, losing, or sharing electrons. In nuclear reactions, the protons and neutrons in the nucleus of an atom are rearranged to form new elements. These two types of reactions are fundamentally different and involve different types of particles and energy.

Explanation:

The products of a rxn in order:

1. Balance the skeleton equation and add state symbols (when applicable) to create a complete balanced equation

2. Write all reactants in ion notation.

3. Bond all the ions, reactants and products, to produce a skeleton equation

4. According to the pattern the reactants predict, move the ions only to the correct arrangement as products.

1. Balance the skeleton equation and add state symbols (when applicable) to create a complete balanced equation.

2. Write all reactants in ion notation.

3. Bond all the ions, reactants and products, to produce a skeleton equation.

4. According to the pattern the reactants predict, move the ions only to the correct arrangement as products.

For example, if the reactants are NH4+ and OH- and the predicted products are NH3 and H2O, the skeleton equation would be NH4+ + OH- --> NH3 + H2O.

The process of moving the ions to the correct positions would then be: NH4+ + OH- --> NH4OH --> NH3 + H2O.

5. Once the ions are in the correct positions, double check that the equation is balanced by counting the number of atoms on both sides of the equation (i.e. the number of nitrogen atoms must be the same on both sides, the number of hydrogen atoms must be the same on both sides, and the number of oxygen atoms must be the same on both sides).

6. Move the ions only to the correct arrangement as products: Move the ions to the correct positions to form the products of the reaction. Make sure that the number of atoms on each side of the equation are equal and the state.

7. If the equation is balanced, you have successfully predicted.

To learn more about Balance the skeleton equation:

https://brainly.com/question/19909826

#SPJ4

Preorder Traversal and Postorder Traversal of the tree with root vertex are given below:

Preorder Traversal

Let T be a rooted tree with root r that is ordered. If T only contains r, r is T's preorder traversal. Otherwise, suppose that T. T...., T., are the subtrees at r from left to right in T The pre- order traversal begins by visiting r. It continues by traversing T; in preorder, then T₂ in preorder, and so on, until 7, is traversed in preorder.

Postorder Traversal

Let 7' be an ordered rooted tree with root r. It consists only of r, then is the postorder traversal of T. Otherwise, suppose that T. T....T, are the subtrees at from left to right. The postorder traversal begins by traversing 7; in postorder, then T in postorder,.... then T. in postorder, and ends by visiting r.

To learn more about Postorder Traversal click here

brainly.com/question/28335324

#SPJ4

If you are going to bake potatoes, and your potatoes are soft and dehydrated, they can be soaked in hypotonic solution in a more firm before baking.

Before baking potatoes that are soft and dehydrated, it is important to give them a good soaking to make them firmer.

For this, a hypotonic solution such as salt water is preferred. Start by filling a large bowl with cold water and adding some salt. The salt will help to draw out moisture from the potatoes, making them firmer and more suitable for baking. Submerge the potatoes in the water and let them soak for at least 30 minutes.

Drain the water and pat the potatoes dry with a paper towel. This will remove any excess moisture and help them to crisp up when baking. You can then season the potatoes as desired and bake them as normal. The soaking process helps to rehydrate the potatoes, making them firmer and more suitable for baking.

The salt also helps to draw out moisture, so that when the potatoes are baked, they will be crisp on the outside and fluffy on the inside. The soaking process is an important step in preparing potatoes for baking, as it helps to make them firmer and more suitable for baking.

To know more about osmosis, click below:

https://brainly.com/question/2811191

#SPJ4

Powerful molecular forces Intermolecular forces that are weak Answer bank High surface tension, high viscosity, high vapor pressure, and high boiling point.

A liquid's resistance to flowing is determined by its viscosity. Viscosity is a measure of how strongly intermolecular forces are present in a liquid. All four parameters—boiling point, melting temperature, surface tension, and viscosity—decline significantly. The substance's vapor pressure rises as a result of the molecules' easy escape due to weak forces. In a closed container, vapor pressure develops when liquid molecules have enough kinetic energy to break free from the intermolecular interactions and transform into a gas. The magnitude of intermolecular forces has an inverse relationship with vapor pressure.

Learn more about viscosity here-

https://brainly.com/question/4513132

#SPJ4

NH3 i.e. ammonia compounds has a number of electron rich regions that is different from the other compounds.

Hydrides that are electron-rich have more electrons than are required for bonding. The majority of the additional electrons are found on the central atom's single pair of electrons. These kinds of compounds are typically produced by the combination of groups of 15, 16, and 17 elements. Think about NH3, PH3, etc. specific electron. Electron-specific hydrogen molecules have enough valence electrons to form covalent bonds. Those hydrides that possess precisely the proper number of electrons for a covalent connection are known as electron precise hydrides. These kinds of compounds are typically made with group 14 components. The compounds typically have a tetrahedral shape. CH4, SiH4, as an example, etc. Electron-deficient compounds are those that don't have enough electrons to completely fill the octet of the central atom. For each pair of bonded atoms to form a conventional electron-pair bond, these compounds are deficient in electrons. Electron-deficient compounds can be found in polymorphic forms to make up for their lack of electrons. Compounds with less than 8 electrons in their valence shells, such as B2H6, AlH3, etc., are considered to be electron-deficient.

To know more about electron rich please refer: https://brainly.com/question/20388963

#SPJ4

Response: N2 + 2O2 = 2NO2.

An entire or partial burning of items occurs during a combustion event when oxygen is present.

The appropriate combustion reaction in this instance is N2(g) + 2O2(g) 2NO2 (g)

The reaction demonstrates how nitrogen gas burns in the air to create nitrogen (IV) oxide.

Precipitation reactions, decomposition reactions, synthesis processes, single and double replacement reactions, among others, are different types of chemical reactions.

Study up on Synthesis reactions.

Visit brainly.com/question/16987748

#SPJ1

Instead, the ability of strong acids to liberate hydrogen atoms (H+) into a particular solution determines their classification.

A solution with a pH greater than 7.0 is referred to as a base. Any solution where the percentage of Hydroxide ions is higher than the percentage of H+ ions is said to be basic. While certain bases immediately take H+, others produce OH- ions instead, which then react with hydrogen to create water. Acid: A solution with too many H+ ions. The Latin name for it is acidus, meaning means "sharp" or "sour." Base: An overabundance of OH- ions in a solution. Alkali is another word for base. Aqueous: A primarily water-based solution. Acids enrich solutions with Hydrogen Ions (H+). Hydrogen ions (H+) & chloride ions are produced when hydrochloric (HCl) splits (Cl-).

Learn more about hydrogen

https://brainly.com/question/1426421

#SPJ4

Identify each statement as True or False a) True b) True c) True d) False  Not just pure water, but all aqueous solutions are subject to the equilibrium constant Kw.

In pure water, the concentrations of the hydronium and hydroxide ions are identical, making the solution neutral. Based on how much they ionise in water, acids and bases are categorised as strong or weak. - Salt and water are typically produced when acids and bases react. When the amount of hydrogen ions and hydroxide ions are equilibrium in moles, neutralisation takes place. The weak acid neutralises the base when it is introduced to the mixture.

To learn more about solution, click here.

https://brainly.com/question/1616939

#SPJ4

Answer:

it's not possible for a solid material to transfer heat through convection.

Explanation:

This would require more movement within the material, than a solid is capable of.

This brings us to liquids and gases.

The speed of light constant ( c ) is 3.00 × 108 ( m / s ). Therefore, option A is correct.

Speed is what it means. the speed at which an object's location changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined. Since speed simply has a direction and no magnitude, it is a scalar quantity.

"As a force, that is the speed of light in a vacuum. If you wonder why c, the Latin term celeritas, which means speed, is the solution."

This establishes the exact value of the speed of light in a vacuum at 299,792,458 m/s. This gives a very succinct response to the question, It does not, however, settle the issue. The SI is based on a lot of real-world factors.

Thus, option A is correct.

To learn more about the speed, follow the link;

https://brainly.com/question/7359669

#SPJ1

The mass of the solid mixture can be determined from the molality and depression in freezing point of the solution. The mass obtained for the solution is 46.4 g.

Freezing point of a solution decreases from that of pure solvent when  a non-volatile solute is added into it. The depression in freezing point ΔT is proportional to the molality of the solution.

ΔT = Kf m

Where Kf is the molal depression constant. Kf for water is 1.86 K /(mol Kg)

Given that ΔT = 5.23 °C

m = ΔT / Kf

   = 5.23  °C / 1.86 K /(mol Kg)

   = 2.811 m

Molality = no.of moles of the solid mixture/ mass of solvent in Kg.

no. of moles = molality × solvent mass

= 2.811 m × 0.05 Kg = 0.140 moles

Given the weight of the solid mixture = 6.50g

Hence, its composition by mass = 6.50/ 0.140 moles = 46.4 g.

Therefore, the composition by mass of the solid mixture is 46.4 g.

To find more on molality, refer here:

https://brainly.com/question/26921570

#SPJ1

60.8/200 or 0.3 mole or 1.80×10^23 atoms are contained.

Atom is a particle of the matter that uniquely defined as a chemical elements.An atom is consist of a central nucleolus that is surrounded  by or more negetivly changes of electrons.

One mole of element contains 6.203×10 ^ 23 atoms

And one mole measures the molar mass of compund

Here Pt molar mass is 195 g

So 97.6/195 is 0.5 mole nearly or 3.115×10^23 atoms

Then gold Au molar mass is 197 g nearly

So 50.5/197 is 0.25 mole and 1.50×10^23 atoms

Then mercury Hg molar mass is 200 nearly and here

60.8/200 or 0.3 mole or 1.80×10^23 atoms

To know more about atom click-

https://brainly.com/question/6258301

#SPJ1

Buffers which lack biological activity and are unlikely to interfere with any biochemical reactions include Both Tris and HEPES.

A buffer is a substance that can withstand a pH shift when acidic or basic substances are added. Small additions of acid or base can be neutralized by it, keeping the pH of the solution largely constant.

One of the greatest all-purpose buffers for biological research has been referred to as HEPES. The molecule is zwitterionic at biological pH and functions as a buffer best between pH 6.8 and pH 8.2. Tissue culturing is only one of the many uses for which HEPES has been utilized.

The term "tris" refers to the chemical tris-hydroxymethyl aminomethane, whose formula is (HOCH2)3CNH2. Tris is frequently used in biochemistry, particularly for nucleic acid solutions, as a component of buffer solutions, such as in TAE and TBE buffer.

For more questions on Buffers

https://brainly.com/question/27371101

#SPJ4

The complete question should be:

Buffers which lack biological activity and are unlikely to interfere with ANY biochemical reactions include:

Tris.

Hepes.

Phosphate.

Both Tris and HEPES.

Acids

There are various definitions for an acid. The simplest description of an acid is a chemical molecule with one or more hydrogen atoms that, when dissolved in water, gives forth hydronium ions (H3O+).

Because acids are molecular, they do not assume the expanded three-dimensional structures of ionic substances like NaCl and remain single molecules in their pure form. However, when these molecules are dissolved in water, a positively charged anion and a hydronium ion are produced as a result of the chemical connection between the hydrogen atom and the remainder of the molecule breaking. An equation involving chemicals can represent this:

HCl+H2O→H3O++Cl−

In an inorganic acid's formula, the H of the acid is written first. After the acid dissolves, the anion is all that is left of the acid (apart from the H). Although a significant class of chemicals, organic acids are not covered in this article.

Acid Names

Since all acids contain hydrogen, an acid's name is determined by the anion that it is associated with. These anions come in monatomic and polyatomic forms.

Binary acid names (in aqueous form)

An acid that contains hydrogen and another element is referred to as a binary acid. The majority of binary acids have a halogen in them. The prefix hydro- is used to start an acid name, which is then followed by the base name of the anion and the suffix -ic.

Oxyacids name

An oxyacid is an acid made up of three elements: hydrogen, oxygen, and another one. Typically, the third element is a nonmetal.

a) Oxyanions with the -ite end.

The anion's root is followed by the suffix -ous to form the name of the acid. No prefix is present.

b)Oxyanions that end in -ate.

The anion's root and the suffix -ic are used to identify the acid. No prefix is present.

In conclusion

Acids are molecular substances that discharge hydrogen ions.

The two elements hydrogen and the other make up a binary acid.

Hydrogen, oxygen, and another element are all present in oxyacids.

The anion that is bound to the hydrogen provides the basis for the acid's name.

To know more about acid nomenclature

https://brainly.com/question/25148363