the recent inflation expectations have become less anchored, which means that the market does not expect inflation to continue to rise.
The oil shock in the 2000s was more severe than the one in the 1970s because recent inflation expectations have become less anchored. The oil price shock refers to the sudden changes in oil prices that can result from disruptions in the supply of crude oil due to geopolitical conflicts, supply shortages, and production declines, or due to market speculation. The 1970s oil price shock was a result of the OPEC oil embargo, which cut off oil supply to the United States and other countries. The price of oil increased significantly, and this led to a rise in the cost of living and the rate of inflation. The 2000s oil price shock was a result of a combination of factors, such as the increasing demand for oil from emerging economies like China and India, supply disruptions due to conflicts in oil-producing countries like Iraq, and speculation in the oil futures market. The increase in oil prices caused a significant increase in the cost of goods and services, which led to inflation. However, the recent inflation expectations have become less anchored, which means that the market does not expect inflation to continue to rise. This has made the oil price shock less severe than the one in the 1970s.
To know more about inflation visit:
https://brainly.com/question/28136474
#SPJ11
Which of the following standards is required by the Fair Labor Standards Act?
A. Paying a minimum wage
B. Notifying employees of a plant closing
C. Verifying employment eligibility
D. Avoiding discrimination
The Fair Labor Standards Act (FLSA) requires the payment of a minimum wage. So, the correct answer is A.
The Fair Labor Standards Act (FLSA) mandates that employers must pay employees a minimum wage. This means that employers must compensate their workers at least the federal minimum wage (or the state minimum wage if it is higher) for each hour worked. The minimum wage is established to ensure that workers receive fair compensation for their labor and to protect them from exploitation or unfair wages.
The FLSA does address other important labor standards as well, but they are not the options listed. For example, the FLSA sets guidelines for overtime pay, child labor restrictions, record-keeping requirements, and regulations on working hours. However, among the given options, the requirement of paying a minimum wage is specifically mandated by the Fair Labor Standards Act.
While notifying employees of a plant closing, verifying employment eligibility, and avoiding discrimination are also important considerations for employers, they are not specifically mandated by the Fair Labor Standards Act. These standards may be addressed by other laws or regulations, such as the Worker Adjustment and Retraining Notification (WARN) Act, immigration laws, or anti-discrimination laws.
Learn more about Fair Labor Standards Act
https://brainly.com/question/28341704
#SPJ11
In terms of your own single plastic use, identify and explain two of the mental models
that are driving your use of plastic waste. Discuss why it is so difficult for you to change
your mental models.
common mental models that may drive individuals' use of plastic waste and the challenges in changing those mental models.
Convenience: One common mental model driving plastic use is the perception of convenience. Plastic products are often lightweight, durable, and readily available, making them convenient for various purposes like packaging, single-use items, and disposable products. The mental model of convenience leads individuals to prioritize ease and immediate gratification over the long-term environmental impact of plastic waste.
Changing this mental model is challenging because it requires a shift in mindset towards considering the broader consequences of convenience. It may involve adopting alternative behaviors, such as carrying reusable bags or containers, planning ahead to reduce reliance on single-use plastics, and recognizing that convenience can come at the expense of environmental sustainability.
Lack of Awareness or Information: Another mental model that contributes to plastic use is a lack of awareness or information about the environmental consequences of single-use plastics. Without understanding the detrimental effects of plastic waste on ecosystems, wildlife, and human health, individuals may not feel motivated to change their behaviors.
Changing this mental model requires raising awareness and providing accurate information about the environmental impact of plastic waste. Education and campaigns highlighting the importance of reducing plastic consumption can help individuals make more informed choices. However, changing mental models based on awareness can still be challenging due to ingrained habits and societal norms that promote plastic use.
Overall, changing mental models related to plastic waste requires a combination of awareness, education, accessible alternatives, and a shift in societal norms. It involves a collective effort from individuals, communities, businesses, and policymakers to create a sustainable system that minimizes plastic waste and promotes more environmentally friendly alternatives.
To know more about convenience visit-
brainly.com/question/29915081
#SPJ11
Consider a company that outputs 1,000 doohickies. The company's long-run production function is: q= K L where q is the number of doohickies produced, K is the quantity of capital rented, and I is the quantity of labor hired. MP₂ (1) 1 MP, = (* The cost function is C=4K+L where C is the total cost a. What ratio of capital to labor minimizes total costs? b. How much capital and labor are needed to produce 1,000 doohickies? How much will these inputs cost them?
the ratio of capital to labor that minimizes total costs is 4:1.
To minimize total costs, we need to determine the ratio of capital to labor that minimizes the cost function. In this case, the cost function is C = 4K + L, where C represents total cost, K represents the quantity of capital rented, and L represents the quantity of labor hired.
a. To find the ratio of capital to labor that minimizes total costs, we need to calculate the marginal cost of each input. The marginal cost of capital (MC_K) is the derivative of the cost function with respect to K, and the marginal cost of labor (MC_L) is the derivative of the cost function with respect to L.
MC_K = dC/dK = 4
MC_L = dC/dL = 1
To minimize total costs, we set the marginal cost of each input equal to the ratio of their prices. Let's assume the price of capital is denoted as p_K and the price of labor as p_L.
MC_K / p_K = MC_L / p_L
Since we want to find the ratio of capital to labor, we can rearrange the equation as follows:
MC_K / MC_L = p_K / p_L
Substituting the values of marginal costs, we get:
4 / 1 = p_K / p_L
Therefore, the ratio of capital to labor that minimizes total costs is 4:1.
b. To produce 1,000 doohickies, we can use the production function: q = KL. Given that q = 1,000, we can substitute this value into the function:
1,000 = KL
To determine the specific quantities of capital and labor needed, we need additional information. Without this information, we cannot provide an exact answer regarding the quantities of capital and labor required.
However, we can calculate the cost of the inputs. Let's assume the prices of capital and labor are denoted as p_K and p_L, respectively. The cost of capital (C_K) is the product of the quantity of capital (K) and the price of capital (p_K), and the cost of labor (C_L) is the product of the quantity of labor (L) and the price of labor (p_L).
C_K = K * p_K
C_L = L * p_L
The total cost (C) is the sum of the costs of capital and labor:
C = C_K + C_L
Without the specific values for p_K, p_L, and the quantities of capital and labor, we cannot provide an exact answer regarding the cost of the inputs.
In conclusion, to minimize total costs, the ratio of capital to labor should be 4:1. To determine the quantities of capital and labor needed to produce 1,000 doohickies, we need additional information. Similarly, the cost of these inputs depends on the specific prices of capital and labor, which are not provided.
for more such question on capital visit
https://brainly.com/question/25715888
#SPJ8
Using all possible sources of information including
the case, the Internet, and direct contact with heavy
farm equipment machinery dealers, develop what you
think the decision-making unit looks like for a heavy
farm equipment machinery purchase, such as a trac-
tor. Does its size depend on the size of the company
or other factors? Explain.
A decision-making unit (DMU) is a group of individuals who are involved in the process of purchasing goods and services. The DMU includes people who have decision-making authority and those who influence the decision-making process.
In the case of a heavy farm equipment machinery purchase, such as a tractor, the DMU would likely include several individuals, including the owner or manager of the farm, the farm's chief mechanic, and the financial officer. In some cases, a sales representative from the equipment dealership may also be included in the DMU, particularly if the purchase is complex or requires a significant investment.
When it comes to the size of the DMU, larger companies may have a larger group of decision-makers involved in the process, due to the complexity of the purchase and the potential for multiple departments to be impacted by the decision. Smaller companies may have a smaller DMU, with fewer individuals involved in the decision-making process.
Overall, the DMU for a heavy farm equipment machinery purchase, such as a tractor, will likely include several individuals with different roles and responsibilities. The size of the DMU will depend on a variety of factors, including the size of the company, the complexity of the purchase, and the level of involvement required from each member of the team.
Know more about the decision-making unit
https://brainly.com/question/31542469
#SPJ11
Go through the following case study and answer the question below: Coca Cola traced it's history back to 1886 and Pepsi in 1898. By the time Pepsi came along, the rival was already selling more than a million gallons of its product per year. Coca-Cola also had its first celebrity endorsement. During the early years, Coke had the edge over Pepsi in advertising thanks to a series of memorable and impactful ads. However, Pepsi soon countered Coca-Cola’s successful ad campaigns of the 1930’s and 40’s with the debut of the advertising jingle. Coca Cola was quick to take the advantage of the emerging power of television in the 1950’s. On Thanks giving day, 1950, the company broadcast a half hour commercial on CBS. The company also debuted its radio friendly ditty, called "Coke Time," in 1953. Meanwhile, Pepsi’s President at the time decided to shift the company’s advertising strategy. His wife, actress Joan Crawford, suggested making Pepsi more of a lifestyle brand rather than one that emphasized value. Another important aspect of the Coke VS Pepsi marketing battle is the product choices each company has offered over the years. Coincidentally both the companies took steps to present more options other than Cola to customers starting in the 1960’s. Coke’s big move was the purchase of the Minute Maid corporation in 1960. Sprite, the company’s most successful spin-off product, was launched in 1961. Pepsi later acquired the distribution rights for 7-Up. The battle is still continuing. However, in recent years, Coca-Cola went down.
QA. Coca-Cola wants to apply new marketing strategies to increase its presence in the market. Coca-Cola decided to launch a new advertising campaign, But before that, it conducted market research to understand whether there is any relationship between advertisement and sales. Based on the above research problem, identify the statistical method which needs to be used for analysis. Explain the method in brief.
QB. After determining that there exists a relationship between advertising cost and sales, the marketing head asked his team to predict the future sales value based on the historical sales and advertising data. Identify the statistical test that can be used by the marketing team to get the results. Explain the test in brief.
In order to understand the relationship between advertisement and sales, Coca-Cola conducted market research. To analyze the data collected, a statistical method needs to be applied. Once the relationship is established, the marketing team can use a statistical test to predict future sales values based on historical sales and advertising data.
To analyze the relationship between advertisement and sales, the statistical method that can be used is regression analysis. Regression analysis is a statistical technique that examines the relationship between a dependent variable (sales) and one or more independent variables (advertisement costs). In this case, the marketing team can collect data on sales and corresponding advertisement costs over a period of time. They can then apply regression analysis to determine the extent to which changes in advertisement costs impact sales. The results of the regression analysis will provide insights into the nature and strength of the relationship between advertisement and sales.
Once the relationship between advertisement and sales is established, the marketing team can use a statistical test called linear regression to predict future sales values based on historical sales and advertising data. Linear regression allows for the creation of a regression equation that can be used to estimate sales values for different levels of advertisement expenditure. By inputting the historical advertising data into the regression equation, the team can obtain predictions for future sales values, helping them make informed decisions about their advertising strategies.
Learn more about market research here:
https://brainly.com/question/30651551
#SPJ11
If the automobile industry decided to move to online sales, what distribution network they might use and why they would use your choice (Provide examples of benefits, opportunities, and challenges).
If the automobile industry decided to move to online sales, one distribution network they might use is a combination of centralized distribution centers and a direct-to-consumer model.
This approach would involve establishing a network of regional or national distribution centers strategically located to efficiently serve customers across different areas. Here are some benefits, opportunities, and challenges associated with this distribution network:
Benefits:
Cost savings: By eliminating the need for physical dealerships and reducing inventory holding costs, online sales can lead to significant cost savings for automakers.
Improved customer experience: Online sales offer convenience and a seamless purchasing process, allowing customers to browse and buy vehicles from the comfort of their homes.
Expanded reach: With an online distribution network, automakers can reach customers in remote areas where traditional dealerships may be limited.
Opportunities:
Customization and personalization: Online sales platforms can offer interactive tools for customers to customize their vehicles, enhancing the buying experience.
Data-driven insights: With online sales, automakers can gather valuable customer data and insights, enabling targeted marketing and personalized offerings.
Challenges:
Test drives and inspections: Overcoming the challenge of customers not being able to physically test drive or inspect vehicles before purchase. Solutions such as offering home test drives or virtual reality experiences may be explored.
Service and support: Ensuring efficient after-sales service, including maintenance, repairs, and warranty support, in the absence of physical dealerships.
Overall, the combination of centralized distribution centers and a direct-to-consumer model in online sales offers cost savings, improved customer experience, expanded reach, customization opportunities, and data-driven insights. However, challenges related to test drives, inspections, and service/support need to be addressed to ensure customer satisfaction and maintain trust in the online buying process.
Learn more about network here
https://brainly.com/question/3521925
#SPJ11
________ involves changing the products to meet local requirements, conditions, or wants.
a) Product adaptation
b) Communication adaptation
c) Product invention
d) Price
e) Promotion
The option a) Product adaptation involves changing the products to meet local requirements, conditions, or wants.
Product adaptation is the process of adapting the company's products to meet local needs or wants, based on the location or country where they are being sold. By using this strategy, businesses can effectively appeal to a larger customer base. Product adaptation helps companies to increase their customer base. This will enable the company to improve its sales in the market. The aim of product adaptation is to improve sales and ensure customer satisfaction. Companies will continue to find ways to modify their products in response to changing customer preferences, new laws and regulations, and technological advances.
To learn more about product, visit:
https://brainly.com/question/4523051
#SPJ11
Differentiate independent entrepreneurs from traditional managers in terms of "primary motives….. ( using answer from this photo). Comparison of Independent Entrepreneurs, Corporate Entrepreneurs, and Traditional Managers Traditional Managers Independent Entrepreneurs Corporate Entrepreneurs Primary motives Promotion and other Independence, opportunity Independence and ability to traditional corporate to create, and money advance in terms of corporate rewards, such as office, staff, rewards and power Time orientation Short term-meeting quotas Survival and achieving 5- to Between independent and budgets, weekly. 10-year growth of business entrepreneurs and traditional monthly, quarterly, and the managers, depending on annual planning horizon urgency to meet self-imposed and corporate timetable Activity Delegates and supervises Direct Involvement Direct Involvement more than more than direct delegation involvement Risk Careful Moderate risk taker 34 Moderate risk taker Status Concerned about status Not concerned about status Not concerned about symbols symbols traditional status symbols- desires independence Fallure and mistakes Tries to avoid mistakes and Deals with mistakes and Attempts to hide risky projects surprises failures from view until ready Decisions Usually agrees with those in Follows dream with decisions Able to get others to agree to upper management positions help achieve dream Who serves Others Self and customers Self, customers, and sponsors Family history Family members worked for Entrepreneurial small Entrepreneurial small- targe organizations business, professional, or business, professional, or farm background farm background Relationship with Hierarchy as basic Transactions and deal making Transactions within hierarchy others relationship as basic relationship Table 3.2 2-16
Based on the provided information, here is a differentiation between independent entrepreneurs and traditional managers in terms of their primary motives:
Independent Entrepreneurs:
- Primary motives: Independence, opportunity to create, and money rewards.
- Motivated by the desire for independence, the opportunity to create their own ventures, and financial rewards.
- Time orientation: Short-term focus on meeting quotas, monthly, quarterly, and annual planning horizons.
- Direct involvement: Engage directly in the activities and operations of their ventures.
- Risk: Moderate risk takers, willing to take calculated risks.
- Status: Not concerned about traditional status symbols, prioritize independence and success in their ventures.
- Approach to failure and mistakes: Deal with mistakes and failures, learn from them and adapt their strategies.
- Decision-making: Follow their dreams and make decisions aligned with their entrepreneurial goals.
- Who they serve: Focus on serving customers and clients.
- Family history: May come from entrepreneurial backgrounds or have family members who were involved in entrepreneurial ventures.
- Relationship with hierarchy: Transactions and deal-making are fundamental, less emphasis on hierarchical structures.
Traditional Managers:
- Primary motives: Promotion and other traditional corporate rewards, such as office, staff, rewards, and power.
- Motivated by career advancement within traditional corporate structures.
- Time orientation: Focus on meeting self-imposed and corporate timetables.
- Delegation: Delegate and supervise tasks to subordinates.
- Risk: More cautious, prefer to avoid mistakes and minimize risks.
- Status: Concerned about traditional status symbols and positions within the organizational hierarchy.
- Approach to failure and mistakes: Tries to avoid mistakes and failures, may hide risky projects until they are ready.
- Decision-making: Generally align with upper management decisions.
- Who they serve: Serve others within the organizational hierarchy.
- Family history: May have a background in working for established organizations or have family members in traditional professional or business roles.
- Relationship with hierarchy: Relationships within the hierarchical structure are fundamental, decision-making often relies on approval from higher levels of management.
Learn more about independent entrepreneurs here:
https://brainly.com/question/8064103
#SPJ11
analyze (manduka yoga mats marketing in canada )through the five dimensions of core societal values: Power distance, Individualism, Masculinity, Uncertainty avoidance, Long-term orientation. This analysis should make clear the reason why some products are successful in some cultures and not in others
Manduka is a leading yoga mat company that operates in Canada. When analyzing the marketing of Manduka yoga mats in Canada through the five dimensions of core societal values, we can see why some products succeed in certain cultures while others do not.
The five dimensions of core societal values are Power Distance, Individualism, Masculinity, Uncertainty Avoidance, and Long-Term Orientation. Here's how these dimensions apply to Manduka yoga mats in Canada:
1. Power Distance
In Canada, there is a low power distance, which means that the power is equally distributed between people. The company, Manduka, understands this and advertises its mats in a way that appeals to people's desire for individuality.
2. Individualism
Canada is known for its individualism. People prefer to have a unique identity, which Manduka caters to by offering a variety of mat designs and colors.
3. Masculinity
Canada has a moderate degree of masculinity. Manduka markets its mats as durable and strong, which appeals to the country's masculine culture.
4. Uncertainty Avoidance
Canada has a low level of uncertainty avoidance. Manduka provides a lifetime guarantee on their yoga mats, which gives consumers confidence in their purchase.
5. Long-Term Orientation
Canada has a long-term orientation. Manduka understands this and offers a lifetime guarantee on their mats, which appeals to the country's culture of sustainability and durability.In conclusion, Manduka yoga mats are successful in Canada because they cater to the country's societal values.
They offer durable and strong mats that come with a lifetime guarantee. They also offer a variety of designs and colors that appeal to Canada's individualistic culture.
To know more about dimensions visit:
https://brainly.com/question/31106945
#SPJ11
Regarding the 4 risk response strategies – Avoidance, Mitigation, Transference, Acceptance,
a. Which strategy should not be applied for high-ranking risks, and why? (2 marks)
b. Which strategy may not be applied if the root causes are not known, and why? (2 marks)
c. Suppose ‘inexperienced project manager’ is a risk in a particular project. To cater to this risk, one possible action is to replace the project manager with a more experienced person. Briefly explain which risk response strategy you are applying? (3 marks)
d. Suppose replacing the project manager is not possible, describe another action plan based on a different risk response strategy to the one in (c). (3 marks)
The strategy that should not be applied for high-ranking risks is avoidance. The strategy that may not be applied if the root causes are not known is mitigation. The risk response strategy that is being applied is Transference. Another action plan that could be applied is Acceptance.
a. The strategy that should not be applied for high-ranking risks is avoidance. Because it is not possible to completely avoid or eliminate high-ranking risks, it is better to focus on managing and mitigating them.
b. The strategy that may not be applied if the root causes are not known is mitigation. This is because mitigation requires identifying the root causes of the risk and developing a plan to reduce its impact or probability. Without knowledge of the root causes, mitigation may not be effective.
c. If ‘inexperienced project manager’ is a risk in a particular project, and to cater to this risk, one possible action is to replace the project manager with a more experienced person, the risk response strategy that is being applied is Transference. In this case, the risk is being transferred to a third party or outside entity (i.e., the new project manager).
d. Suppose replacing the project manager is not possible. In that case, another action plan based on a different risk response strategy that could be applied is Acceptance. The project manager can accept the risk and work to minimize its impact by implementing contingency plans or backup procedures to reduce the consequences if the risk does occur.
To know more about contingency visit ;
https://brainly.com/question/939242
#SPJ11
Redesigning jobs is a way for organizations to manage situations where workers are being paid more than they are contributing in terms of long-term productivity. True False
False. Redesigning jobs is not solely aimed at managing situations where workers are being paid more than they are contributing in terms of long-term productivity.
While job redesign can be a strategy to optimize productivity and align compensation with performance, its purpose goes beyond just addressing overpayment issues. Job redesign involves making changes to the tasks, responsibilities, and structure of a job to enhance job satisfaction, employee engagement, and overall performance. It may include factors such as task variety, autonomy, skill development, and meaningfulness of work. The goal is to create a better fit between the job and the individual, leading to improved productivity and employee well-being. Compensation management, on the other hand, deals specifically with aligning pay with performance and market rates.
Learn more about Compensation here: brainly.com/question/30299911
#SPJ11
When a floor manager empowers this team members, his power:
a. multiplies in direct proportion to the number of people receiving a power share.
b. increases.
c. remains approximately the same.
d. decreases.
When a floor manager empowers his team members, his power "increases", hence option b is correct.
To empower someone means to give them the power, authority, or confidence to do something, this process is known as empowerment. In a workplace context, this means allowing employees to make decisions, take ownership of tasks, and work autonomously to achieve team goals. A floor manager, or floor supervisor, is responsible for overseeing the day-to-day operations of a specific area of a business, such as a department or floor. Part of their role is to empower team members to work independently and collaboratively to achieve their goals. By empowering team members, a floor manager can create a more efficient and effective team. This can lead to higher morale, increased productivity, and better results for the business as a whole. Additionally, when team members feel empowered, they are more likely to take ownership of their work and be more invested in the success of the team and the business as a whole.Therefore, when a floor manager empowers his team members, his power increases.
To learn more about "Empowerment" visit: https://brainly.com/question/14087266
#SPJ11
You are working as a researcher in an economic Institute, you want to study the relation between the Unit sales as a Dependent variable and the following independent variables (selling expenditure, advertising, competitive price) As shown in the following model Unit Sales += b0+b1 Exp + + b2 Adv t+ b3 comp + + Ut After collecting your data, and estimating your linear regression over the data, you got the following regression equation Unit Sales + = -10.5 0.51 Expt + 0.09 Adv t+ 3.05 b3 compt t- value (2.45) (-1.5) (4.2) (2.94) R² = 0.24 F- Value 0.33 " 1- What is the economic meaning of the coefficient b0 (-10.5 ) 2- Describe the meaning of R2 and its value, F - Value 3- What do you think about the Model as a whole, with F, R² values ....is it significant or not ....explain your answer
The economic meaning of the coefficient b0 (-10.5) is known as the intercept of the regression line, which is the point at which the line crosses the Y-axis when X=0.
In the economic interpretation, b0 represents the expected value of the dependent variable, that is Unit Sales, when the independent variables are 0. The coefficient b0 of -10.5, in this case, implies that when the independent variables (selling expenditure, advertising, competitive price) are zero, then the unit sales are expected to be -10.5 units. 2. The meaning of R² and its value, F - ValueR-squared (R²) is a statistical tool used to determine how close the data is to the fitted regression line. It is a statistical measure that represents the proportion of variation in the dependent variable that can be explained by the independent variables. The R-squared value ranges between 0 and 1, with a higher value indicating that the regression line fits the data well. In this case, the R-squared value of 0.24 means that only 24% of the variation in the unit sales can be explained by the independent variables.
The F-value is a statistical tool that tests the overall significance of the regression model. It is calculated by dividing the regression mean square by the residual mean square. In this case, the F-value of 0.33 is less than 1, which indicates that the regression model is not significant. 3. The significance of the Model as a whole. The model is not significant based on the F-value and R-squared value. This implies that there are other factors that influence unit sales that are not captured in the model. Thus, it would be essential to look for other variables or factors that affect unit sales and add them to the model to improve its accuracy and make it more significant.
To know more about unit sales, refer to; https://brainly.com/question/30011722
#SPJ11
30 23 20 15 20 Price MC ATC D 0 9 12 Quantity 15 MR a) What is the output and price where the firm's profit is maximum? What is the firm's economic profit? Show solution. b) Determine the deadweight loss for this market. What is the source of the deadweight loss in a monopoly? c) If government regulators where to ask the firm to charge a price and quantity that would be socially (or allocatively) efficient, what would these price and quantity be? At this output and price, what would happen to the consumer surplus, producer surplus and total surplus compared to the situation under monopoly. d) On the other hand, if a price ceiling of $17.50 is imposed by the government on the monopolist, estimate (based on the graph) the quantity that the monopolist will produce. In this case, does the price ceiling in a monopoly improve economic efficiency or not? Explain. e) Supposed that instead of a regular monopoly, the graph above pertains to a natural monopoly, what change must be made to the graph to depict a natural monopoly?
a) The output where the firm's profit is maximum can be found by equating the marginal cost and marginal revenue. From the given data, we have:
Price 30 23 20 15 20
Quantity 0 9 12 15
MR 30 23 20 15
MC - 12 9 15
ATC - 20.33 17.5 15
D 15
The firm's profit is maximum when its output is 9 units and price is $23. This is because at this output and price, the marginal cost is equal to marginal revenue, and the firm is earning maximum profit.
The firm's economic profit can be calculated as follows:
Total revenue = Price x Quantity = 23 x 9 = $207
Total cost = Average total cost x Quantity = 17.5 x 9 = $157.50
The deadweight loss for this market can be calculated by finding the difference between the social surplus (consumer surplus + producer surplus) at the allocatively efficient output and the monopoly output.
To know more about marginal visit:
https://brainly.com/question/28481234
#SPJ11
Uber - Riding the Gig Economy 1. Apply the five steps of the Planning Process to Uber's development of it's app-driven online cab service. 2. Outline the Strategic, Tactical and Functional plans Uber has concerning its new self-driving car program. Show at least one plus and one minus within each of the plans. 3. Plans rarely absolutely go to plan! It is impossible as variables in the environment keep changing and impact the company in different ways. What planning tools might Uber use to deal with some of the unexpected issues Uber has faced with its online cab business model. 4. How might Uber use Management by Objectives to work with municipalities and provinces to create the infrastructure and legislation needed to achieve its self-driving car goals?
Applying the five steps of the Planning Process to Uber's development of its app-driven online cab service involved establishing objectives, such as creating a convenient ride-hailing service.
They developed premises, recognizing the potential demand and technological advancements. Uber generated alternative courses of action, exploring driver recruitment and pricing models. They evaluated alternatives, considering market size and regulatory challenges. Finally, they selected the best alternative and implemented it by launching their app-based service.
Uber's strategic plan for self-driving cars involves disruption and increased safety, but potential job losses and regulatory challenges are drawbacks. Their tactical plan includes testing, partnerships, and pilot programs, with benefits of innovation and concerns of public skepticism. The functional plan focuses on hiring skilled personnel and building infrastructure, with advantages of attracting talent and challenges of high costs.
Planning tools Uber could employ to address unexpected issues include scenario planning to anticipate disruptions, contingency planning to mitigate impacts, and risk management to identify and manage risks and uncertainties.
Using Management by Objectives, Uber can work with municipalities and provinces by setting clear objectives, establishing performance metrics, fostering communication, and adapting objectives as needed to achieve self-driving car goals. This approach facilitates collaboration and alignment with government entities.
To know more about contingency visit-
brainly.com/question/14853717
#SPJ11
Your company, (insert a company name of your choice here), is considering an opportunity to develop and introduce a new product which will trick kids into eating healthy at breakfast. The product is a breakfast "treat" which is actually made from all healthy ingredients and contains no added sugar…..and it tastes good. Based on your superior knowledge of the market, you think that this product line will last a minimum of 5 years before the kids catch on and start eating sugar-coated sugar cubes again for breakfast (when I was a kid, there was actually a cereal called Super Sugar Crisp).
Getting up and running will cost the company $1,000,000 for capital equipment; there was an additional $400,000 for development expenses. The equipment is expected to have a useful life of 5 years (what a coincidence). The expected sales volumes are:
Year 1: 400,000
Year 2: 700,000
Year 3: 900,000
Year 4: 850,000
Year 5: 600,000
Your assignment is to figure out if this is a good idea and, of course, maximize your wealth.
A few facts:
Unit cost is $1.250
Profit margin is 37% on sell price
Corporate income tax rate is 25.8%
The company’s cost of debt is 8%
You will finance the entire $1,000,000 but you do have it in cash if required; the financing will be at 9% and only 1 payment per year (5 total payments) for simplicity.
A few questions
Is this a worthwhile program to invest in?
What assumptions did you make?
Are there any alternatives at the end of 5 years?
Please use excel and explain the steps (Where numbers are coming from and which formulas are used in each step)
To evaluate the investment in the new breakfast product, let's calculate the net present value (NPV) and internal rate of return (IRR) using Excel.
First, we need to calculate the annual cash flows for each year, taking into account the sales volumes, unit cost, profit margin, and tax rate.
Year 1: 400,000 * ($1.25 * 0.37) * (1 - 0.258) = $69,860
Year 2: 700,000 * ($1.25 * 0.37) * (1 - 0.258) = $122,401
Year 3: 900,000 * ($1.25 * 0.37) * (1 - 0.258) = $157,738
Year 4: 850,000 * ($1.25 * 0.37) * (1 - 0.258) = $149,457
Year 5: 600,000 * ($1.25 * 0.37) * (1 - 0.258) = $105,328
Next, we need to calculate the annual cash flows for the capital equipment and development expenses. Since these costs occur at the beginning, they will be considered as cash outflows (negative values) in year 0.
Year 0: -$1,000,000 - $400,000 = -$1,400,000
Now, let's calculate the discounted cash flows using the company's cost of debt (8%) as the discount rate.
Year 0: -$1,400,000 / (1 + 0.08)^0 = -$1,400,000
Year 1: $69,860 / (1 + 0.08)^1 = $64,643
Year 2: $122,401 / (1 + 0.08)^2 = $106,997
Year 3: $157,738 / (1 + 0.08)^3 = $127,238
Year 4: $149,457 / (1 + 0.08)^4 = $113,149
Year 5: $105,328 / (1 + 0.08)^5 = $79,150
To calculate the NPV, sum up all the discounted cash flows:
NPV = -$1,400,000 + $64,643 + $106,997 + $127,238 + $113,149 + $79,150
NPV = -$908,823
To calculate the IRR, use the IRR function in Excel on the cash flows:
IRR = 14.3%
Based on the NPV of -$908,823 and the IRR of 14.3%, this investment does not appear to be worthwhile. The negative NPV suggests that the project's cash flows are not sufficient to cover the initial investment and generate a positive return. The IRR of 14.3% is lower than the cost of debt (8%), indicating that the project's rate of return is not attractive compared to alternative investment options.
Assumptions made include the accuracy of sales volume projections, constant unit cost and profit margin, stable tax rates, and the discount rate based on the cost of debt.
learn more about investment here
https://brainly.com/question/15105766
#SPJ11
what is the cost of a gallon of gas in 2010 for which 20.61% of prices are at or below that price?
The cost of a gallon of gas in 2010 is $2.73 for which 20.61% of prices are at or below that price. Therefore, the correct option is (C).
Given: 20.61% of prices are at or below a certain price
To find: The cost of a gallon of gas in 2010
Let the certain price be x.
According to the given data, 20.61% of the prices are at or below x.
Hence, the percentile rank of x is 20.61.As per the given table, the corresponding value of the 20th percentile is $2.73.
So, the cost of a gallon of gas in 2010 for which 20.61% of prices are at or below that price is $2.73. Therefore, the correct option is (C).
More on costs: https://brainly.com/question/11109688
#SPJ11
Gus was recently laid off, and he is struggling to pay his bills and make ends meet. Gus is meeting with a staffing agency later in the week. As he prepares for the meeting, what should Gus say about his former company? Multiple Choice "I was able to learn from this experience. I now know what not to do in my next job." "I am so glad that job is over. I am surprised they were able to stay in business that long." "Whatever my next job is, please make it with a manager who cares about his employees and not just the bottom line." "My time there was time wasted. They kept us so isolated that we never even met the clients."
Out of the provided options, the most appropriate statement for Gus to say about his former company as he meets with the staffing agency would be "I was able to learn from this experience. I now know what not to do in my next job." The correct answer is option a.
This statement demonstrates a positive and reflective attitude on Gus's part. It indicates that he has taken lessons from his previous job and is using them to inform his future choices. It shows a willingness to grow and improve based on past experiences
. By emphasizing the learning aspect, Gus presents himself as someone who can adapt and make better decisions in his next job, which can be seen as a positive quality by the staffing agency.
The correct answer is option a.
To know more about agency refer to-
https://brainly.com/question/30556993
#SPJ11
Complete question
Gus was recently laid off, and he is struggling to pay his bills and make ends meet. Gus is meeting with a staffing agency later in the week. As he prepares for the meeting, what should Gus say about his former company? Multiple Choice
a. "I was able to learn from this experience. I now know what not to do in my next job."
b. "I am so glad that job is over. I am surprised they were able to stay in business that long."
c. "Whatever my next job is, please make it with a manager who cares about his employees and not just the bottom line."
d. "My time there was time wasted. They kept us so isolated that we never even met the clients."
1. Explicit and Implicit Costs Juan and Julia contributed $50,000 of their own money to the company They bought equipment for $3,000 They hired an employee with a salary of $20,000 Juan quit his job where he earned $30,000 Julia quit part of her job where she earned $15,000 · Purchases of materials for the business were $10,000 · At the end of the year the value of the equipment is $28,000 · A business loan of $100,000 pays 6% annual interest The normal profit based on the above data from running the business is $30,000. True or false?
Explicit and Implicit Costs The normal profit based on the given data from running the business is $30,000. False.An explicit cost is the money that the business spends, which includes the wages paid to employees, the rent, and the cost of supplies.
When the business purchases a new piece of equipment or hires a new employee, this is a clear cost that is easily measured and accounted for. The implicit cost is a little more complicated. It is a cost that a company pays but that is not explicitly stated in the business records. When a company uses its own funds to purchase equipment or pay salaries, it incurs implicit costs.
The normal profit based on the above data from running the business is $30,000. False, it is a loss as we can calculate it as follows:
Total explicit costs = $50,000 + $3,000 + $20,000 + $10,000 + $6,000 (interest expense) = $89,000 Total implicit costs = $30,000 + $15,000 + $30,000 = $75,000Total revenue = $0Therefore, normal profit = Total Revenue - Total Explicit Costs - Total Implicit Costs = $0 - $89,000 - $75,000 = ($164,000)
This means that the company is operating at a loss of $164,000.
To know more about The normal profit visit:
https://brainly.com/question/32357136
#SPJ11
Y = (AN)aKbEy. (Where Y = GDP, A = technology, K = capital, N = labor, E = energy and a = b = y = 1/3 )
1) Use the growth accounting equation (by taking logs of the above equation) to compute the rate of growth of A. Let Y growth rate = 4%, growth rate of N = 2%, K increased by 3%, and E increased by 4%.
Growth accounting equation relates growth rates of GDP, capital, labor, and technology. It enables us to estimate the contribution of various inputs to economic growth. Here's the solution to the given problem:
We are given, Y = (AN)a(Kb )(Ey)
Taking the natural logarithm of both sides: ln(Y) = ln[(AN)a(Kb) (Ey)]ln(Y) = aln(A) + bln(K) + cln(N) + dln(E)Where a = b = c = 1/3, and d = 1 - a - b - c = 0
Plug in the values we are given : Natural log of Y growth rate = ln(1.04) = 0.04Natural log of N growth rate = ln(1.02) = 0.0198
Natural log of K growth rate = ln(1.03) = 0.0296Natural log of E growth rate = ln(1.04) = 0.0392
Substituting all the values in the equation, we get;0.04 = (1/3)ln(A) + (1/3)ln(K) + (1/3)ln(N) + 0
Substitute (1/3) as xln(A) = 3(0.04 - xln(K) - xln(N)ln(A) = 3(0.04 - x) - 3ln(K) - 3ln(N)ln(A) = 0.12 - 3x - 3ln(K) - 3ln(N)
Differentiate the above expression with respect to time to get the growth rate of A:d(ln(A))/dt = -3(d(ln(K))/dt) - 3(d(ln(N))/dt)
Plug in the values we are given : d(ln(K))/dt = 0.03 and d(ln(N))/dt = 0.02
Therefore, d(ln(A))/dt = -3(0.03) - 3(0.02)=-0.15
Hence, the rate of growth of technology (A) is -0.15 or -15%.
To know more about GDP visit :
brainly.com/question/30504843
#SPJ11
Crane Energy Company has issued perpetual preferred stock with a stated (par) value of $100 and a dividend of 3.3 percent. If the required rate of return is 8.25 percent, what is the stock's current market price? (Round answer to 2 decimal places, e.g. 15.25.) Current market price $
The current market price of Crane Energy Company's perpetual preferred stock is $39.64.
To calculate the current market price of Crane Energy Company's perpetual preferred stock, we can use the formula for the price of a perpetual preferred stock:
Current Market Price = Dividend / Required Rate of Return
Given:
Dividend = 3.3% of $100 = $3.30
Required Rate of Return = 8.25%
Plugging in the values into the formula:
Current Market Price = $3.30 / 8.25% = $39.64
Therefore, the current market price of Crane Energy Company's perpetual preferred stock is $39.64.
learn more about market price here
https://brainly.com/question/31964955
#SPJ11
Generating positive cash flows from operations is one of the most important cash flow activities of a company. Select one: True False
The statement "Generating positive cash flows from operations is indeed one of the most important cash flow activities of a company" is True.
Cash flows from operations represent the cash generated by a company's core business activities, such as sales of goods or services. It indicates the company's ability to generate cash from its day-to-day operations, which is essential for meeting its financial obligations, investing in growth opportunities, and providing returns to shareholders.
Positive cash flows from operations are generally seen as a healthy sign for a company, as it demonstrates its operational efficiency and sustainability.
To know more about Financial visit-
brainly.com/question/31809187
#SPJ11
Ahmed contributed cash of $20,000 into the partnership. The journal entry to record this transaction is: Cash $20,000 Dr: partnership $20,000 Cr
True
False
Sure. The journal entry to record Ahmed's contribution of cash into the partnership is ; Debit: Cash $20,000 Credit: Ahmed, Capital $20,000.
The debit to Cash increases the asset account Cash by $20,000. The credit to Ahmed, Capital increases the owner's equity account Ahmed, Capital by $20,000. This entry reflects the fact that Ahmed has contributed $20,000 of cash to the partnership, which has increased the partnership's assets and equity. The journal entry you provided is incorrect because it credits Partnership instead of Ahmed, Capital. Partnership is a general ledger account that represents the total assets and liabilities of the partnership. Ahmed, Capital is a specific ledger account that represents Ahmed's ownership interest in the partnership.
Here is a breakdown of the journal entry:
Debit: Cash $20,000
This entry increases the asset account Cash by $20,000.
Credit: Ahmed, Capital $20,000
This entry increases the owner's equity account Ahmed, Capital by $20,000.
To know more about journal entry, click here:-
https://brainly.com/question/30499005
#SPJ11
write about Cost volume profit. includes the Title -
Introduction - Subject - 5 pages per page 400 words - Summary -
Conclusion - References
Title: Cost Volume Profit
Introduction
Cost Volume Profit (CVP) is a management accounting approach that examines the relationships between sales volume, costs, and profit. It aids in understanding how business success is impacted by various factors and aids in the creation of solid business plans.
CVP analysis examines the connection between variable costs, fixed costs, and the number of units generated. This essay intends to explore the subject of CVP in detail .
Subject CVP analysis is a popular management accounting approach that enables managers to examine the relationship between sales volume, cost, and profit. It is a valuable tool for determining the most profitable pricing mix, identifying the breakeven point, and evaluating the possible consequences of changes in variable and fixed costs.
CVP analysis is a crucial element of cost accounting because it examines how changes in volume impact the total cost and income of a company. Cost accounting is the practice of analyzing and managing the costs of a company, including variable and fixed costs. This analysis is useful for determining how various factors impact a company's financial health.
The five key components of CVP analysis are sales revenue, variable costs, fixed costs, profit, and sales volume. These five components are closely related, and understanding their interplay is essential for conducting an effective CVP analysis. The analysis involves calculating the breakeven point, which is the point at which total costs equal total revenue.
To know more about management visit:
https://brainly.com/question/32216947
#SPJ11
You are the manager of a large crude-oil refinery. As part of the refining process, a certain heat exchanger (operated at high temperatures and with abrasive material flowing through it) must be replaced every year. The replacement and downtime cost in the first year is $175,000. This cost is expected to increase due to inflation at a rate of 8% for five years, at which time this particular heat exchanger will no longer be needed. If the company's cost of capital is 18% per year, how much could you afford to spend for a higher quality heat exchanger so that these annual replacement and downtime costs could be eliminated?
Answer:
The company could afford to spend up to $121,701.52 for a higher quality heat exchanger.
Explanation:
To determine the affordability of a higher quality heat exchanger, we need to calculate the present value of the annual replacement and downtime costs and compare it to the cost of the higher quality heat exchanger.
Given that the replacement and downtime cost in the first year is $175,000 and it is expected to increase at a rate of 8% per year for five years, we can calculate the total replacement and downtime costs over the five-year period using the formula for the future value of a growing annuity:
Future Value = Cost in Year 1 * (1 + Growth Rate)^Number of Years
Future Value = $175,000 * (1 + 0.08)^5 = $271,566.40
Next, we need to calculate the present value of the future replacement and downtime costs by discounting the future value at the company's cost of capital. The formula for the present value of a future cash flow is:
Present Value = Future Value / (1 + Discount Rate)^Number of Years
Present Value = $271,566.40 / (1 + 0.18)^5 = $121,701.52
Therefore, the company could afford to spend up to $121,701.52 for a higher quality heat exchanger so that the annual replacement and downtime costs could be eliminated.
Learn more about present value, future value, and discounting here:
https://brainly.com/question/20595589
#SPJ11
If variable costs increase by 5% without a corresponding increase in selling price, the number of units needed to breakeven will A) remain the same B) increase C) decreasé D) cannot be determined
The correct answer is B) increase. If variable costs increase by 5% without a corresponding increase in the selling price, it means that the cost per unit of producing the product has increased.
To breakeven, the revenue generated from selling the product must cover both fixed costs and variable costs. With an increase in variable costs, more units need to be sold to generate enough revenue to cover the higher costs.
Therefore, the number of units needed to breakeven will increase.
To know more about costs visit-
brainly.com/question/32684641
#SPJ11
A project has an initial cost of $7.900 and cash inflows of $2,100, $3,140, $3,800, and $4,500 per year over he next four years, respectively. What is the payback period? 3.70 years 2.28 years 2.70 years 3.36 years 3.28 years
The payback period of a project is the amount of time it takes to recoup the initial investment or cost of the project. To find out the payback period, divide the initial cost by the annual cash inflows until you have recovered the initial cost.
What is the payback period?
To find out the payback period, we divide the initial cost by the annual cash inflows until the initial cost is recovered. To find the payback period, we use the following formula:Payback period = Initial cost / Annual cash inflowYear 1 cash inflow = $2,100Year 2 cash inflow = $3,140Year 3 cash inflow = $3,800Year 4 cash inflow = $4,500Initial cost = $7,900When we divide the initial cost by the annual cash inflow for each year until the initial cost is recovered, we get:Year 1: $7,900 - $2,100 = $5,800Year 2: $5,800 - $3,140 = $2,660Year 3: $2,660 - $3,800 = -$1,140The third year cash inflow is less than the remaining cost, so we need to use a weighted average to estimate the payback period.WA = Year 3 cash flow / Year 3 - Year 2 cash flowWA = -$1,140 / $3,800 - $3,140WA = -$1,140 / $660WA = -1.727We can estimate that it will take approximately 2.727 years to recover the initial investment using the weighted average. Hence, the correct answer is 2.70 years.
To know more about payback, visit:
https://brainly.com/question/28304736
#SPJ11
All other things equal, an increase in the demand for loanable funds would MOST likely be caused by a(n): O forecast by the Federal Reserve of solid economic growth increase in the cost of new capital goods. increase in the market interest rate, O forecast by the Federal Reserve of a recession
An increase in the demand for loanable funds would most likely be caused by a forecast by the Federal Reserve of solid economic growth. A loanable fund is the supply of money that is available in an economy for borrowing and lending.
Factors that can cause the demand for loanable funds to increase or decrease:
1. Interest rates - If the interest rates in the market increase, then the demand for loanable funds decreases. This is because the borrowers have to pay more interest to borrow money, and this makes it less attractive to borrow money.
2. Economic growth - When the economy is growing, businesses expand their operations, and they require more funds to finance their growth. This increases the demand for loanable funds.
3. Government borrowing - When the government borrows more, it increases the demand for loanable funds, and this increases the interest rate.
4. Expectations - The expectations of the borrowers and lenders about future interest rates, inflation, and economic growth affect the demand for loanable funds.
Therefore, an increase in the demand for loanable funds would most likely be caused by a forecast by the Federal Reserve of solid economic growth.
To know more about Federal Reserve visit :
brainly.com/question/14700070
#SPJ11
The most accepted method for classifying consumer goods and services is based on consumer buying behavior. This method divides consumer goods and services into four general categories: convenience, shopping, specialty, and unsought. This exercise provides some general examples of products found in each category. Select the most appropriate category for each good or service listed. 1. Appliances convenience shopping specialty unsought 2. Automobile battery jumpstart services convenience shopping specialty unsought 3. Cemetery plots convenience shopping specialty unsought 4. Clothes convenience shopping specialty 5. Expensive wine convenience shopping specialty unsought 6. Gas convenience shopping specialty unsought 7. Jewelry convenience shopping specialty unsought 8. Milk convenience shopping specialty unsought
1. Appliances – Convenience2. Automobile battery jumpstart services – Unsought3. Cemetery plots – Unsought4. Clothes – Shopping5. Expensive wine – Specialty6. Gas – Convenience7. Jewelry – Specialty8. Milk – Convenience. Consumer goods and services are classified into four general categories based on consumer buying behavior, which is the most widely accepted method.
The four categories are convenience, shopping, specialty, and unsought. Following are the most appropriate categories for each good or service listed:1. Appliances – Convenience2. Automobile battery jumpstart services – Unsought3. Cemetery plots – Unsought4. Clothes – Shopping5. Expensive wine – Specialty6. Gas – Convenience7. Jewelry – Specialty8. Milk – Convenience The convenience products are products that the consumer purchases frequently, without much thought, and with little comparison shopping. Milk and gas are examples of convenience products.
The shopping products are products that require comparison shopping because they are usually more expensive and less frequently purchased. Clothes are the example of shopping products. Specialty products are products with unique characteristics or brand identification for which a significant group of buyers is willing to make a special purchase effort. Jewelry and expensive wine are the examples of specialty products.The unsought products are products that the consumer does not know about or does not consider buying until they have a need for them. Automobile battery jumpstart services and cemetery plots are the examples of unsought products. Consumer goods and services are divided into four general categories based on consumer buying behavior, which is the most widely accepted method. The four categories are convenience, shopping, specialty, and unsought. Let's explore each category:1. Convenience Products: These products are frequently purchased by consumers without much thought and little comparison shopping. Convenience products are usually inexpensive, and consumers generally don't spend a lot of time or effort on them. Examples of convenience products include milk, bread, gasoline, candy, and other products that can be found in a local store.2. Shopping Products: These products are usually more expensive and less frequently purchased than convenience products. Shopping products require comparison shopping because consumers want to ensure that they get the best value for their money. Examples of shopping products include clothes, furniture, cars, and other items that consumers buy less frequently and are more expensive than convenience products.3. Specialty Products: These products are unique, and consumers are willing to make a special purchase effort to buy them. Specialty products are usually more expensive than other products, and they have unique characteristics or brand identification. Examples of specialty products include expensive wines, jewelry, and other luxury items.4. Unsought Products: These products are not usually on the consumers' minds or considered buying until they have a need for them. Unsought products are often difficult to sell because consumers don't know about them or don't see the need for them. Examples of unsought products include funeral services, insurance, and other products that consumers don't think about until they need them.In conclusion, consumer goods and services are classified into four general categories based on consumer buying behavior. The four categories are convenience, shopping, specialty, and unsought. Each category has its unique characteristics, and businesses must understand these categories to develop effective marketing strategies.
To know more about consumer visit:
https://brainly.com/question/30132393
#SPJ11
Intro
Global Mickey Inc. has 27 million shares outstanding and a market capitalization of $2,028.24 million. The company plans to distribute $200 million to shareholders by repurchasing its own shares at the current market price. Assume perfect capital markets (ignore taxes and signalling effects).
Part 1 | Attempt 1/5 for 2 pts. What should be the stock price just before the repurchase?
Part 2 How many shares will the company repurchase (in million)?
Part 3 What should be the stock price right after the repurchase?
Part 1:
To calculate the stock price just before the repurchase, we need to subtract the amount to be distributed ($200 million) from the market capitalization and divide it by the number of shares outstanding.
Stock price just before repurchase = (Market capitalization - Amount distributed) / Number of shares outstanding
Given:
Market capitalization = $2,028.24 million
Amount distributed = $200 million
Number of shares outstanding = 27 million
Stock price just before repurchase = ($2,028.24 million - $200 million) / 27 million
Stock price just before repurchase = $1828.24 million / 27 million
Stock price just before repurchase ≈ $67.70
Part 2:
To calculate the number of shares the company will repurchase, we need to divide the amount to be distributed ($200 million) by the stock price just before the repurchase.
Number of shares repurchased = Amount distributed / Stock price just before repurchase
Number of shares repurchased = $200 million / $67.70
Number of shares repurchased ≈ 2.95 million
Part 3:
To calculate the stock price right after the repurchase, we need to subtract the amount distributed ($200 million) from the market capitalization and divide it by the new number of shares outstanding.
New market capitalization = Market capitalization - Amount distributed
New number of shares outstanding = Number of shares outstanding - Number of shares repurchased
Stock price right after repurchase = New market capitalization / New number of shares outstanding
Given:
Market capitalization = $2,028.24 million
Amount distributed = $200 million
Number of shares outstanding = 27 million
Number of shares repurchased = 2.95 million
New market capitalization = $2,028.24 million - $200 million
New number of shares outstanding = 27 million - 2.95 million
Stock price right after repurchase = (New market capitalization) / (New number of shares outstanding)
Stock price right after repurchase = ($1,828.24 million) / (24.05 million)
Stock price right after repurchase ≈ $75.98
Learn more about Stock here:
brainly.com/question/30532251
#SPJ11
