The osmotic pressure of a solution formed by dissolving 0.231 g of the protein in 150 mL of water at 298 K is found to be 2.054 torr.

Answer:

10

Explanation:

how many electron-containing d orbitals are there in an atom of tin? name the element in the 4th period whose atoms have the same number of highest-energy-level elctrons as tin

10, germanium

Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Therefore, the total number of orbitals containing electrons in an atom of tin are 10 orbitals.

Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.

The electronic configuration of tin is 1s² 2s² 2p⁶ 3s²3p⁶ 4s² 3d¹⁰ 4p⁶ 5s²4d¹⁰ 5p² or [Kr] 5s² 4d¹⁰ 5p². The total number of orbitals containing electrons in an atom of tin are 10 orbitals. tin an element that belongs to p block of periodic table.

Therefore, the total number of orbitals containing electrons in an atom of tin are 10 orbitals.

To know more about element, here:

https://brainly.com/question/8460633

#SPJ2

Answer:

The molecules move slower than the temp of 50°c and their average kinetic energy decreases.

Explanation:

kinetic energy cannot increase as temperature is reduced. molecules will still move with reduced motion.

Answer:

A) Q + XZ = X + QZ is a single displacement reaction.

B) Q + Z = QZ is a synthesis reaction

C) QT = Q + T is a decomposition reaction

D) QT + XZ = QZ + XT is double replacement reaction.

Explanation:

A) Q + XZ = X + QZ

This is a single displacement reaction because it is one in which one element is substituted for another one in a compound. In this case X is substituted for Q.

B) Q + Z = QZ

This is a synthesis reaction because Q and z combine to form a single product QZ.

C) QT = Q + T

This is a decomposition reaction because the compound QT breaks down to form 2 simpler substances Q and T.

D) QT + XZ = QZ + XT

Thus is a double replacement reaction because QT and XZ have exchanged cations to form new compounds QZ and XT

Answer:

The final temperature aluminium-water system is 24° C

Explanation:

Heat energy, H = mcθ

Where m is mass of substance, c is specific heat capacity, θ is temperature difference

Using the principle, Heat lost = Heat gained

Let the final temperature of the aluminium-water system be Tfinal

Heat lost by aluminium, H₁ = -m₁c₁(Tfinal - 40)

Heat gained by water, H₂ = m₂c₂(Tfinal -21)

Heat lost by aluminium, H = -[30 × 0.21 × (Tfinal - 40)]

H₁ = -6.3Tfinal + 252

Heat gained by water, H₂ = 50 × 1.0 × (Tfinal - 21)

H₂ = 5Tfinal - 21

Equating H₁ and H₂

-6.3Tfinal + 252 = 5 Tfinal - 21

5Tfinal + 6.3Ffinal = 252 + 21

11.3 Tfinal = 273

Tfinal = 273/11.3

Tfinal = 24° C

Therefore, the final temperature aluminium-water system is 24° C

Answer:

The molecules of oxygen should be placed as reactants in the equation.

Explanation:

1:      N₂ + O₂ → 2NO

2:     2NO + O₂ → 2NO₂

complete reaction:

N₂ + 2O₂ → 2NO₂

We can not place oxygen at the side of products neither we can cancel it because, products can only be obtained at the end of the reaction but according to the equations' oxygen is not the end product of the reaction. But the addition into the reaction (Eq. 2) to make the new product.

Also, we can not cancel it because to cancel out molecules of oxygen should be present at the both sides with same amount in the stoichiometric equation.

Hence, in a balanced chemical equation, oxygen should be written as a reactant by using the correct number of moles.

Answer:

Answer is A... Melting and freezing

Answer:

Coke

Explanation:

A solid fuel formed by heating coal in the absence of air is coke. Coke is black colored, tough porous substance. It is pure carbon.

Answer:

B. 2.14 x 10^-19 J

Explanation:

The energy of a wave of light can be obtained using the equation:

E = h*c/λ

Where E is the energy in joules,

λ is wavelength = 930nm = 930x10⁻⁹m

h = Planck's constant = 6.626x10⁻³⁴Js

c = Speed of light = 3.00x10⁸m/s

Replacing:

E = 6.626x10⁻³⁴Js*3.00x10⁸m/s/930x10⁻⁹m

E = 2.14x10⁻¹⁹J

Right option is:

Answer:

Explanation:

A reaction rate is the measure of the change in concentration of the disappearance of reactants or the change in concentration of the appearance of products per unit time

83.3% yield

Explanation:

First, we need to convert 240 g of [tex]Fe_{2}O_{3}[/tex] into moles:

[tex]240 \:g \:Fe_{2}O_{3} \:\times(\frac{1\:\text{mol}\:Fe_{2}O_{3}}{159.69\: \text {g}\:Fe_{2}O_{3}})[/tex]

[tex]=1.50 \:\text{mol}\:Fe_{2}O_{3}[/tex]

Next, find the theoretical Fe yield using molar ratios.

[tex]1.50 \: \text {mol} \: Fe_{2}O_{3}\: \times (\frac{2\: \text{mol} \: Fe}{1 \:\text{mol} \: Fe_{2}O_{3}})[/tex]

[tex] = 3.00 \: \text{mol} \: Fe[/tex]

Then convert this back into grams:

[tex]3.00 \: \text{mol} \:Fe \times (\frac{55.845 \: \text{g} \: Fe}{1 \: \text{mol} \: Fe}) = 168 \: \text{g} \: Fe[/tex]

Note that actual yield is only 140 g Fe so percentage yield is

[tex]\dfrac{140\:\text{g}\:Fe}{168\:\text{g}\:Fe} \times 100[/tex]%= 83.3%

83.3%

The answer is 83.3%

(i) Liang - liang stoma lebih banyak di bahagian bawah daun berbanding di bahagian atas permukaan daun.

(ii) Struktur X berfungsi mangawal pembukaan dan penutupan liang stoma

Answer:

A simple answer: Carnivores don't eat plants only flesh. So they would not need soil. But it would be hard for Carnivores to get energy because they get energy indirectly from the animals (herbivores) that they eat. How do they get the energy from a herbivore you might ask. Herbivores eat only plants and that gives the herbivore the plant's energy; but if the herbivore gets eaten, it is indirectly transferred into the Carnivore. Hope this helped!!

Carnivore = only feeds on flesh

Herbivore = eats only plants

Omnivore = eats plants and animals/flesh

Answer: The volume of the solution is 28.75 mL

Explanation:

Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)

Given values:

Molarity of copper nitrate = 0.560 M

Given mass of copper nitrate = 3.02 g

Molar mass of copper nitrate = 187.56 g/mol

Putting values in equation 1, we get:

[tex]0.560=\frac{3.02\times 1000}{187.56\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{3.02\times 1000}{187.56\times 0.560}=28.75mL[/tex]

Hence, the volume of the solution is 28.75 mL

Answer:

Risky behavior or risk-taking behavior is defined according to Trimpop (1994) as “any consciously, or non-consciously controlled behavior with a perceived uncertainty about its outcome, and/or about its possible benefits, or costs for the physical, economic or psycho-social well-being of oneself or others.” In addition to this broad definition, there are other definitions of risky behavior depending on the field of research. While in the economic view, risk is defined in terms of the variability of possible monetary outcomes, in the clinical literature, the risk is generally defined as exposure to possible loss or harm (Schonberg, Fox, & Poldrack, 2011). Turner et al. (2004) described risk-taking behavior further as either a socially unacceptable volitional behavior with a potentially negative outcome in which precautions are not taken, such as speeding, drinking and driving, drugs abuse, unprotected sex and so on.

Answer:

ΔS⁰ = -181.1J/molK

Explanation:

ΔS⁰ of a reaction is defined as the sum of the entropies of the reactants times its reaction coefficient minus the sum of the entropies of the products times its reaction coefficient. For the reaction in the problem:

ΔS⁰ = 2*S{NaCl(s)} - (2*S{Na(s)}+S{Cl2(g)})

ΔS⁰ = 2*72.1J/molK - (2*51.1J/molK + 223.1J/molK)

Answer:

D) the critical point

Explanation:

Point A is the critical point in phase diagram. This is the highest temperature and pressure at which a pure material can exist in vapor/liquid equilibrium. Pretty cool!

Answer:

Step 9

Explanation:

The reason i selected step 9, is if you take a look at the picture hes setting up a funnel,With filter paper and if you take a look at number ''9'' questions it says set up a funnel, filter paper and filter flask which is shown in the picture on top that's how i got my answer

Answer: increasing the number of collisions between reactants

Explanation:

A reaction is possible due to collisions between the reactants to create products. If we increase the concentration of reactants then that means that we are increasing the molecules of the reactants which would give them more chances to collide and make products.

For instance, using a non-chemistry example, if there are few cars in a large city, the accidents there will be less because the cars will have such space that they wouldn't collide with each other. If the number of cars in the city is increased however, there is now less space and more chances for cars to collide.

Answer:

???what metal????????????

Answer:

here are the answers babe. Feel free to ask for more

Answer: The volume of the solution is 85.7 mL

Explanation:

Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)

We are given:

Molarity of solution = 0.600 M

Given mass of [tex]BaSO_4[/tex] = 12.00 g

We know, molar mass of [tex]BaSO_4=[(1\times 137.33)+(1\times 32.07)+(4\times 16)]=233.4g/mol[/tex]

Putting values in equation 1, we get:

[tex]0.600=\frac{12.00\times 1000}{233.4\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{12.00\times 1000}{233.4\times 0.600}=85.68mL=85.7mL[/tex]

The rule of significant number that is applied for the problems having multiplication and division:

The least number of significant figures in any number of the problem determines the number of significant figures in the answer.

Here, the least number of significant figures is 3 that is determined by the number, 0.600. Thus, the answer must have these many significant figures only.

Hence, the volume of the solution is 85.7 mL

Answer:

gravity

Explanation:

Gravity is an example of the force of attraction between two objects that have mass.

Answer:

d. the solution is a acid

Answer:D The solution is an acid

Explanation:The lower the pH of a substance the stronger the acidic level.

Answer:

6.3moles

Explanation:

The balanced equation of the reaction described above between aqueous magnesium chloride and sodium metal is as follows:

MgCl2(aq) + 2Na(s) → 2NaCl(aq) + Mg(s)

From the above equation, 2 moles of sodium metal (Na) produces 1 mole of Magnesium metal (Mg)

Hence, 12.6 mol of Na will produce (12.6/2) mol of Mg.

12.6/2 = 6.3moles of Mg metal.

Answer:

C. Beta

Explanation:

Answer:

Rare earth elements are lanthanum, cerium, praseodymium, neodymium, promethium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium, scandium, yttrium - that appear in low concentrations in the ground.

Explanation:

The rare earth elements (REE) are a set of seventeen metallic elements. These include the fifteen lanthanides on the periodic table plus scandium and yttrium. Rare earth elements are an essential part of many high-tech devices.

Answer:

PCl5 <-> PCl3 + Cl2

PCl5 decomposes into PCl3 and Cl2 according to the equation above. A pure sample of Pcl5 is placed in a rigid, evacuated 1.00 L container. The initial pressure of the PCl5 is 1.00 atm. The temperature is held constant until the PCl5 reaches equilibrium with its decomposition products. The figures below show the initial and equilibrium conditions of the system.

As the reaction progresses toward equilibrium, the rate of the forward reaction

A) increases until it becomes the same as the reverse reaction rate at equilibrium

B) stays constant before and after equilibrium is reached

C) decreases to become a constant nonzero rate at equilibrium

D) decreases to become zero at equilibrium

Explanation:

At equilibrium, both forward and backward reactions take place with constant speed.

The reaction will never cease.

Due to this reason chemical equilibrium is called dynamic in nature.

At equilibrium:

the rate of forward reaction = rate of backward reaction

As the reaction progresses toward equilibrium, the rate of the forward reaction decreases to become a constant nonzero rate at equilibrium.

Answer is option C).

When a system is in a state of chemical equilibrium, neither the reactant concentration nor the product concentration changes over time, nor does the system exhibit any further changes in its attributes. Here the correct option is C.

The system reaches a condition of chemical equilibrium when the rate of the forward reaction equals the rate of the reverse reaction. The system is considered to be in a state of dynamic equilibrium when the concentrations of the reactants and products do not change further as a result of the equal rates of the forward and reverse processes.

Equilibrium is impacted by a number of variables, including temperature, pressure, and the system's concentration. Here at equilibrium the rate of the forward reaction decreases to become a constant nonzero rate at equilibrium.

Thus the correct option is C.

To know more about chemical equilibrium, visit;

https://brainly.com/question/4289021

#SPJ6

Answer:

See explanation

Explanation:

Let us recall that the basic rule in writing balanced chemical reaction equations is that the number of atoms of each element on the right hand side of the reaction equation is the same of the number of atoms of the same element on the left hand side of the reaction equation.

The reaction of red hot iron and steam is written as follows;

3Fe + 4H2O → Fe3O4 + 4H2.

The decomposition reaction of ammonium dichromate is written as;

(NH4)2Cr2O7 → N2 + Cr2O3 + 4H2O

Reaction of aluminium, sodium hydroxide and water is as follows,

2Al + 2NaOH + 2H2O ----> 2NaAlO2 + 3H2

Reaction of potassium bicarbonate with sulphuric acid;

2KHCO3 + H2SO4 -------> K2SO4 + 2H2O + 2CO2

Reaction of zinc and sodium hydroxide is as follows;

Zn + 2NaOH→Na2ZnO2 + H2

Answer:

protons because they have the most positive charge