Answer:
D. all of the elements of Group 18 in orange boxes
Assertion : When the added electron goes to smaller n=3 quantum level, the electron-
electron repulsion is much less.
Reason: The added electron occupies a smaller region of space .
It is due to low volume of electron that causes large distance between two electrons.
When the added electron goes to smaller quantum level, the repulsive force between two electrons is less because the electron which is added occupies small space due to less volume so there is a large distance between two electrons that leads to less force of repulsion.
If the electron has more volume so it occupies more space and there will more repulsive force between two electrons so that's why we can say that the smaller volume of electron is the reason of less repulsive force.
https://brainly.com/question/24387646
Density and Years: What do you know?Objectives: determine and compare density of pennies to assess composition. Procedure:1. Read the directions and create a data table accordingly.2. Place 15-20 pennies in order of consecutive dates. Find the mass of each penny and record.3. Find the volume of all 5 pennies by water displacement and record in your data table. Record the volume adding 5 more pennies at a time until you have measured them all (15-20).a. Find the average volume of 1 penny.4. Calculate the density of each penny and graph according to the year.5. If the density of copper is 8.96 g/cm3 what would the mass of a pure copper penny be?6. Draw a conclusion.7. How might this relate to a real world example?
Answer:I dunno
Explanation:it is the best thing I ever said in this app
ASAP. Five stars + brainless.
A procedure calls for 4 parts reagent A to 16 parts water.What is the dilution of reagent A in water?
a) 4/16
b) 1/5
c) 1/4
d) 4/12
my guess answer iss 1/4 if incorrect sorr
1/5 is the dilution of reagent A in water.
Explanation:
The dilution factor of the diluted solution is determined by dividing the final volume of the diluted solution by the volume of the undiluted solution.[tex]D.F.=\frac{V_f}{V_i}[/tex]
Where:
D.F = Dilution factor
[tex]V_f[/tex] = Final volume of the diluted solution
[tex]V_i[/tex]= Initial volume of the undiluted solution
And the dilution is represented as 1 : D.F.Given:
4 parts of the reagent and 16 parts of water are mixed together to form a diluted solution.
To find:
The dilution of reagent A in water
Solution:
Parts of reagent A =[tex]V_i = 4[/tex]
Parts of water = 16
Final volume of solution = [tex]V _f = 4 + 16 = 20[/tex]
The dilution factor of reagent A:
[tex]D.F=\frac{20}{4}=5[/tex]
The dilution of the reagent A = [tex]1:5=\frac{1}{5}[/tex]
1/5 is the dilution of reagent A in water
Learn more about Dilution here:
brainly.com/question/9920151?referrer=searchResults
brainly.com/question/15213606?referrer=searchResults
HELP IM TIMED!!!!!!!!!
Yellowstone National Park has an average of about 4500 bison living in it. The park covers 3472 square miles. What is the population density of bison living in Yellowstone? a. 1.3 bison/mi^2 b. 16 bison/mi^2 c. 77 bison/mi^2 d. 0.77 bison/mi^2
Answer:
A. 1.3 bison/mi^2
Explanation:
4500 bison divided by 3472 sq miles is 1.3 bison per mile squared.
English
M.
3.x - 9
2r-7
.X + 2
18
Answer:
it will come answer 21 write
will mark brainliest if correct
Which methods separate a mixture according to the size of the particles?
a
filtration and chromatography
b
distillation and chromatography
c
filtration and evaporation
d
distillation and evaporation
Answer:
filtration and chromatography
Explanation:
I hope this will help you :-)
Which of the following statements about alcohols is false?
A. Ethanol is soluble in water.
B. Ethanol has a higher boiling point than ethane.
C. Ethanol produces hydrogen when it burns.
D. None of these
Answer:
It's C. Ethanol produces hydrogen when it burns
When burned, ethanol produces water and CO2.
Help!! due tomorrow
.
Answer:
It's B. The molecules in the system have more kinetic energy than a solid.
ANSWER QUICK PLEASE!!!! 25 POINTS
Acrylonitrile and ethyl acetate have the same boiling point: 77.2ºC. In one to two sentences, explain what outcome you would expect if a mixture of these two substances were distilled.
The two substances can never be separated by distillation because distillation depends on difference in boiling point.
Distillation is a separation method that depends on difference in boiling point between two substances.
Usually, the substance having a lower boiling point is collected first as the temperature is gradually raised. The substance having a higher boiling point then follows.
However, since the two substances have the same boiling point, they can not be separated by distillation because they will be converted to vapor simultaneously thereby making separation impossible.
Learn more: https://brainly.com/question/15946045
which elements are liquid in the periodic table?
What series does the following compound belong to?
Answer:
B
Carboxylic acid
Explanation:
I'm not entirely sure, but this should be it
!!DUE TODAY, NEED HELP ASAP!!
A student measured the masses of some aluminum and copper cylinders of different volumes. The data is displayed below:
Aluminum: Copper:
Volume (mL)
Mass (g)
Volume (mL)
Mass (g)
3.7
9.99
1.8
16.02
6
16.2
2.3
20.47
8.5
22.99
3.5
31.15
10.74
29
4.2
37.38
15
40.5
5.8
51.62
On graph paper graph the data above on ONE graph. Use the graph paper so the longer side is your y-axis.
Use up the majority of the graph paper. Do not make a small graph!
Use a ruler/straight edge so you graph is neat.
You will need to plot the points for each substance and create a double line graph. When connecting your points for each substance, continue the lines past the plotted points.
Be sure to include a key to identify the substances.
Make your X-axis volume(mL) and your Y-axis mass(g)
Look at the numbers for both substances when creating your scales. You will most likely have a different scale for mass and volume. What is the lowest number? What is the highest number? What does it make sense to go by?
Calculate the density of each metal.
Aluminum:_________________________ Copper:________________________
What happens to the mass of the copper at the volume increases from 6 to 8mL?
Which sample is more dense? How does the graph show you this?
Answer: The data are not arranged in a useful pattern. I arranged them as best I could and made a graph in Excel for demonstration.
Explanation: The data are plotted with mass on the x axis and volume on the y. Add a key to identify the top line as CU and the bottom as Al.
The density of Cu is 8.9 g/ml and 2.70 for Al.
The mass of copper increases by 17.8 grams going from 6 to 8 ml. (8.9 g/ml)*(2 ml) = 17.8 grams.
Copper is more dense. c The graph shows that for the same volumes, copper has the higher mass.
WILL MARK BRAINLEST IF CORRECT!
1) Burning toast physical or chemical
2) Cooking eggs: physical or chemical
3) Melting butter: physical or chemical
4) Removing the pulp (solid) from the orange juice using a juice strainer.: physical or chemical
5) Cutting the toast with a knife: physical or chemical
6) Digesting the food: physical or chemical
difference between atom and ion
plz plz answer
Answer:
Atoms are neutral; they contain the same
samenumber of protons as electrons. By
definition, an ion is an electrically charged
particle produced by either removing
produced by either removingelectrons from a neutral atom to give a
produced by either removingelectrons from a neutral atom to give apositive ion or adding electrons to a neutral atom to give a negative ion.
what evidence have you discovered to explain how the fossil record provides relative ages? use the words: mass extinction, superposition, fossils, and relative age
Answer:
Relative dating is based on the positions of fossils in rock layers. Lower layers were laid down earlier, so they are assumed to contain older fossils. This gives the fossil an approximate age in years. Absolute dating is often based on the amount of carbon-14 or other radioactive element that remains in a fossil up until extinction.
Relative dating is a method of dating where the geologic events are arranged and the rocks are left behind in a sequence. They function on the basis of the stratigraphy and don't provide us with actual numeric data.
It provides us with the relative ages such as mass extinction the fossils are superimposed. It is based on the position of fossils in the layers of the rocks.Learn more about the discoveries to explain how the fossil record.
brainly.com/question/22311467.
cuantos gramos de soluto y solvente tendra 127 gramos de solición cuya concentración es 14% m/m ayuda para resolverlo
banetshegtsjegsgeheb
What do we call planets that are not in our solar system
Someone plz help me !!
Science
Or
Bias?
Describe the color change that would be observed in water in left hand beaker
Answer:
is there supposed to be a photo with this?
Explanation:
. Arrange the following in order of increasing radius:
a) Mg2+, Na+, Al3+
b) Na+, Al3+ , Mg2+
c) Mg2+ , Al3+ , Na+
d) Al3+ , Mg2+, Na+
guys pls help i will venmo you money
Answer:
Al3+<Mg2+<Na+
Explanation:
this is because of nuclear charge (no. of protons)
atomic radius is inversely proportional to nuclear charge.
Chewing food to break it down into smaller particles represents a physical change, but the charging of starch into sugars by enzymes in the digestive system represents a chemical change.Chemical or physical change?
Answer:
Chemical changeExplanation:
The charging of starch into sugars by enzymes in the digestive system shows a chemical change.[tex]\tt{ \green{P} \orange{s} \red{y} \blue{x} \pink{c} \purple{h} \green{i} e}[/tex]
what is sublimation
Explanation:
Sublimation is the conversion of a substance from the solid to the gaseous state without its becoming liquid. ... Freeze-drying of food to preserve it involves sublimation of water from the food in a frozen state under high vacuum. See also vaporization; phase diagram.
May someone help me with the answer to this question I’ve been stuck on it
Explanation:
No, that would be incorrect
Answer:
There arre two main parts of the atom, the nucleus and the orbital rings. The three subatomic particles are contained in each of these, the proton and neutron together in the nucleus and the electrons orbiting in the rings.
11:48 Tue 24 Aug
47%
3. Graphite, aform of carbon, conducts electricity because it has:
(1 Point)
Answer:
carbon because it is the main answer of these
hi <3
graphite is able to conduct electricity because it has delocalised electrons.
explanation:
carbon can bond 4 times, but in graphite it is only bonding to three other carbons, leaving one electron free to carry charge
hope this helps <33
Vapor pressure of any liquid _______. A. increases with increases in temperature B. increases with decreases in temperature C. is not affected by changes in temperature D. increases with increases in volume of the liquid E. None of the Above
Answer:
increase with increases in temperature
Explanation:
please mark me brainleast
Two skaters stand on ice. one weights 250 N, and the other weights 500 N. They push against each other and move in opposite directions. Describe the momentum of each skater after they push away from each other.
Answer:
Because law of momentum, makes it equal
Element Z has 2 natural isotopes. One isotope has a mass of 15.0 amu and a relative abundance of 30%. The other isotope has a mass of 16.0 amu. What is the second isotope's relative abundance?
Answer:
70%
Explanation:
Just substract 100 % - 30%
In your conversion from Milli- to Centi- units, would you move the decimal point to the left or the right?
Answer:
one unit to the left
Explanation:
cm are 10 times mm, so to convert you have to divide by ten
Examples
100 mm = 10,0 cm
0.50 mm = 0.05 cm
How to convert 104 Km to M
Answer:
m=104000
Explanation:
by 1km=1000m
104km=?
Now
104km=104×1000m
=104000m
Therefore,m=104000 ans
104 kilometers is equal to 104,000 meters.
A conversion factor is a ratio that shows how two different units of measurement relate to each other. You can convert a value from one unit to another by multiplying or dividing the original value by a conversion factor.
For example,
Since there are 1000 meters in a kilometer, we need to multiply the distance in kilometers by 1000 to convert it into meters.
So, to convert 104 kilometers to meters:
104 Km * 1000 = 104,000 meters
Therefore, 104 kilometers is equal to 104,000 meters.
Learn more about conversion factor, here:
https://brainly.com/question/30567263
#SPJ6
Come up with 2 examples of derived units from everyday life.
Answer:
answer
Explanation:
Area : Square Meters,
Volume : Cubic Meters,
Density : Kilograms per Meter Cube,
Velocity : Meters per Second Squared,
Force : Newtons (Mass multiplied by Acceleration or Mass multiplied by Displacement divided by Time squared)…..
