Answer:
I don't know what to do
Explanation:
bye
Answer:
a. Single DNA strand used to produce mRNA ⇒ Transcription
b. Requires tRNA ⇒ Translation
c. Ribosome ⇒ Translation
d. DNA polymerase ⇒ Replication
e. Both DNA strands are duplicate ⇒ Replication
f. Described as semi-conservative ⇒ Replication
g. Amino acids added to peptide chain ⇒ Translation
Explanation:
Replication: the double-strand DNA is separated into two strands. Each strand is used as a template by DNA polymerase to produce the other strand. The leading strand is read by DNA polymerase in a continuous form (3' - 5') and the lagging strand is read in a discontinuous form (5'-3'). In this way, both strands are duplicated. The process is semi-conservative because the DNA molecule produced conserves 1 original strand and the other strand is the new synthesized one. The corresponding options are: d, e, f.
Transcription: is a process in which the genetic code of DNA is copied into a molecule called messenger RNA (mRNA). The double-strand DNA is opened and one strand is read. The enzyme involved is RNA polymerase, which binds the DNA (in a sequence called promoter) and uses the nucleotide code of DNA as a template to produce a molecule of RNA (the mRNA). Therefore, the correct option for this process is a.
Translation: is the process in which the mRNA sequence (copied from a DNA molecule) is translated into an amino acid sequence to produce a protein. This process is carried out within the cell ribosome. The mRNA is read in groups of three nucleotides (a codon) that codifies amino acids. The translation between codon and amino acid is assisted by molecules called transference RNA (tRNA). As each codon is decoded, an amino acid is added and the new polypeptide sequence is synthesized. Therefore, the correct options are: b, c, g.
Which substance has the highest boiling point?
Select the correct answer below:
A) ethyl ether
B) ethyl alcohol
C) water
D) these all have the same boiling point
Answer:
D) these all have the same boiling point
Determine the effect each given mutation would have on the rate of glycolysis in muscle cells.
a. loss of binding site for fructose 1 ,6-bisphophate in pyruvate kinase.
b. loss of allosteric binding site for ATP in pyruvate kinase.
c. loss of allosteric binding site for AMP in phosphofructokinase.
d. loss of regulatory binding site for ATP in phosphofructokinase.
1. Increase
2. decrease
3. No effect
Answer:
a. Decrease
b. Increase
c. Increase
d. No effect
Explanation:
Glycolysis is present in muscle cells which converts glucose to pyruvate, water and NADH. It produces two molecules of ATP. Cellular respiration produces more molecules of ATP from pyruvate in mitochondria. Glycolysis increases in pyruvate kinase.
a. Loss of binding site for fructose 1,6-bisphosphate in pyruvate kinase: Decrease
b. Loss of allosteric binding site for ATP in pyruvate kinase: No effect
c. Loss of allosteric binding site for AMP in phosphofructokinase: Increase
d. Loss of regulatory binding site for ATP in phosphofructokinase: Increase
A. An important substrate in the glycolysis pathway is fructose 1,6-bisphosphate. It stimulates pyruvate kinase, an essential enzyme in glycolysis. The amount of pyruvate kinase that is activated will decrease if the fructose 1,6-bisphosphate binding site in pyruvate kinase is eliminated. As a result the rate of glycolysis in the muscle cells will probably decrease.
B. The allosteric ATP binding site of pyruvate kinase controls how active the enzyme is. However, pyruvate kinase is not significantly regulated by ATP in muscle cells. Therefore, it is unlikely that deletion of the ATP-binding allosteric site in pyruvate kinase would have no effect on the rate of glycolysis in muscle cells.
C. The rate-limiting enzyme in glycolysis, phosphofructokinase, is activated from all forms by AMP. It increases the rate of glycolysis by stimulating the activity of phosphofructokinase. If the allosteric binding site for AMP is eliminated, phosphofructokinase activation will be reduced. As a result, the rate of glycolysis in muscle cells will decrease.
D. Phosphofructokinase is inhibited allosterically by ATP. It regulates the rate of glycolysis by a feedback mechanism. High ATP concentrations cause phosphofructokinase to bind to its regulatory site, limiting its activity and delaying glycolysis. If the regulatory binding site for ATP is eliminated, the inhibitory action of ATP on phosphofructokinase would be lost. As a result, muscle cells will glycolysis at a faster rate.
Learn more about glycolysis, here:
https://brainly.com/question/26990754
#SPJ6
At a constant temperature, a sample of gas occupies 1.5 L at a pressure of 2.8 ATM. What will be the pressure of this sample, in atmospheres, if the new volume is 0.92 L?
Using boyles law
[tex]\boxed{\sf v\propto \dfrac{1}{p}}[/tex]
[tex]\\ \sf\longmapsto P_1V_1=P_2V_2[/tex]
[tex]\\ \sf\longmapsto P_2=\dfrac{P_1V_1}{V_2}[/tex]
[tex]\\ \sf\longmapsto P_2=\dfrac{2.8\times 1.5}{0.92}[/tex]
[tex]\\ \sf\longmapsto P_2=\dfrac{4.2}{0.92}[/tex]
[tex]\\ \sf\longmapsto P_2=4.56atm[/tex]
[tex]\\ \sf\longmapsto P_2\approx 4.6atm[/tex]
Answer:
[tex]\boxed {\boxed {\sf 4.6 \ atm}}[/tex]
Explanation:
We are asked to find the new pressure given a change in volume. We will use Boyle's Law, which states the volume of a gas is inversely proportional to the pressure. The formula for this law is:
[tex]P_1V_1= P_2V_2[/tex]
Initially, the gas occupies 1.5 liters at a pressure of 2.8 atmospheres.
[tex]1.5 \ L * 2.8 \ atm = P_2V_2[/tex]
The volume is changed to 0.92 liters, but the pressure is unknown.
[tex]1.5 \ L * 2.8 \ atm = P_2* 0.92 \ L[/tex]
We are solving for the final pressure, so we must isolate the variable P₂. It is being multiplied by 0.92 liters. The inverse operation of multiplication is division, so we divide both sides by 0.92 L.
[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L} = \frac{P_2* 0.92 \ L}{0.92 \ L}[/tex]
[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L}= P_2[/tex]
The units of liters cancel each other out.
[tex]\frac {1.5 * 2.8 \ atm}{0.92 }=P_2[/tex]
[tex]\frac {4.2}{0.92} \ atm= P_2[/tex]
[tex]4.565217391 \ atm = P_2[/tex]
The original measurements of pressure and volume have 2 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 6 in the hundredth place tells us to round the 5 up to a 6.
[tex]4.6 \ atm \approx P_2[/tex]
The pressure is approximately 4.6 atmospheres.
Determine the [OH−] of a solution that is 0.115 M in CO32−. For carbonic acid (H2CO3), Ka1=4.3×10−7 and Ka2=5.6×10−11.
Answer:
[OH⁻] = 4.3 x 10⁻¹¹M in OH⁻ ions.
Explanation:
Assuming the source of the carbonate ion is from a Group IA carbonate salt (e.g.; Na₂CO₃), then 0.115M Na₂CO₃(aq) => 2(0.115)M Na⁺(aq) + 0.115M CO₃²⁻(aq). The 0.115M CO₃²⁻ then reacts with water to give 0.115M carbonic acid; H₂CO₃(aq) in equilibrium with H⁺(aq) and HCO₃⁻(aq) as the 1st ionization step.
Analysis:
H₂CO₃(aq) ⇄ H⁺(aq) + HCO₃⁻(aq); Ka(1) = 4.3 x 10⁻⁷
C(i) 0.115M 0 0
ΔC -x +x +x
C(eq) 0.115M - x x x
≅ 0.115M
Ka(1) = [H⁺(aq)][HCO₃⁻(aq)]/[H₂CO₃(aq)] = [(x)(x)/(0.115)]M = [x²/0.115]M
= 4.3 x 10⁻⁷ => x = [H⁺(aq)]₁ = SqrRt(4.3 x 10⁻⁷ · 0.115)M = 2.32 x 10⁻⁴M in H⁺ ions.
In general, it is assumed that all of the hydronium ion comes from the 1st ionization step as adding 10⁻¹¹ to 10⁻⁷ would be an insignificant change in H⁺ ion concentration. Therefore, using 2.32 x 10⁻⁴M in H⁺ ion concentration, the hydroxide ion concentration is then calculated from
[H⁺][OH⁻] = Kw => [OH⁻] = (1 x 10⁻¹⁴/2.32 x 10⁻⁴)M = 4.3 x 10⁻¹¹M in OH⁻ ions.
________________________________________________________
NOTE: The 2.32 x 10⁻⁴M value for [H⁺] is reasonable for carbonic acid solution with pH ≅ 3.5 - 4.0.
The concentration of hydroxide ion of given solution is 4.3 x 10⁻¹¹M.
How we calculate the [OH⁻]?We can calculate the concentration of hydroxide ions as follow:
[OH⁻][H⁺] = 10⁻¹⁴
Given chemical reaction with ICE table shown as below:
H₂CO₃(aq) ⇄ H⁺(aq) + HCO₃⁻(aq)
Initial: 0.115 0 0
Change: -x +x +x
Equilibrium: 0.115-x +x +x
Given that, Ka = 4.3 x 10⁻⁷
Equilibrium constant for this reaction is written as:
Ka = [H⁺][HCO₃⁻]/[H₂CO₃]
4.3 x 10⁻⁷ = x² / 0.115
x = 2.32 x 10⁻⁴M = [H⁺]
Now we calculate the concentration of hydroxide ion as:
[OH⁻][H⁺] = 10⁻¹⁴
[OH⁻] = 10⁻¹⁴ / 2.32 x 10⁻⁴ = 4.3 x 10⁻¹¹M
Hence, value of [OH⁻] is 4.3 x 10⁻¹¹M.
To know more about pH & pOH, visit the below ink:
https://brainly.com/question/24595796
g An aqueous solution of nitric acid is standardized by titration with a 0.137 M solution of calcium hydroxide. If 19.0 mL of base are required to neutralize 21.8 mL of the acid, what is the molarity of the nitric acid solution
Answer:
M of HNO₃ is 0.119M
Explanation:
A basic concept of titration is that in equivalence point:
mmoles of acid = mmoles of base
We have data from base and we only have data from volume of acid.
In a case our titration is a strong acid against a strong base.
We apply formula:
M of acid . Vol of acid = M of base . Vol of base
M of acid . 21.8 mL = 0.137M . 19 mL
M of acid = (0.137M . 19 mL) / 21.8 mL
M of acid = 0.119 M
When we neutralize all the titrant we reach the equivalence point.
At this point, pH = 7
2HNO₃ + Ca(OH)₂ → Ca(NO₃)₂ + 2H₂O
how many mols of nh4cl are present in 279.0ml of a 0.975 M nh4cl soution?
Answer:
how many mols of nh4cl are present in 279.0ml of a 0.975 M nh4cl soution?
What volume of carbon dioxide is required for inflating the Ziploc bag prototype ?
Answer:
The front passenger airbag has a volume of around 140 l and fully inflates in around 35 ms. The process is similar for side airbags (thorax airbags).
7.7 cm
9.8 cm
0.00
0.162 m
Answer:
Volume = 1222.5cm³
Explanation:
If the question is about the volume of the rectangle:
The volume of a rectangle is obtained by the multiplication of its 3 dimensions: Length, width, height.
In the problem, the length of the rectangle is 0.162m = 16.2cm
The width is 7.7cm
And the height is 9.8cm
The volume is:
Volume = 16.2cm*7.7cm*9.8cm
Volume = 1222.5cm³A filament for a light bulb needs to conduct electricity. Which of the elements listed below might be useful as a light bulb filament? Explain your thinking.
A. Tungsten, W
B. Sulfur, S
C. Bromine, Br
Answer:
A. tungsten
Explanation:
Tungsten is a material which high melting point ie. does not melt easily incase of high temperature
Answer:
option(A):Tungsten
Explanation:
tungsten has highest melting point.
Predict the reactants of this chemical reaction. That is, fill in the left side of the chemical equation. Be sure the equation you submit is balanced. (You can edit both sides of the equation to balance it, if you need to.)
Note: you are writing the molecular, and not the net ionic equation.
NaClO3(aq) + H2O(l)
Answer:
HClO₃(aq) + NaOH(aq) ⇒ NaClO₃(aq) + H₂O(l)
Explanation:
We have the products of a reaction and we have to predict the reactants. Since the products are salt and water, this must be a neutralization reaction. In a neutralization reaction, an acid reacts with a base. To form NaClO₃, the acid must be HClO₃(aq) and the base NaOH(aq). The balanced chemical equation is:
HClO₃(aq) + NaOH(aq) ⇒ NaClO₃(aq) + H₂O(l)
Predict the missing component in the nuclear equation.
238 92U → 234 90Th + X
A. 4 2He
B. 0 -1e
C. 0 0v
Answer:
A
Explanation:
helium (alpha particle)
Which phenomenon explained below is an example of deposition?
Select the correct answer below:
A) Hail is formed from water droplets lifted by air currents to an altitude where they turn into pellets of ice.
B) Frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.
C) In the winter, the top few inches of a pond turn to ice.
D) The visible cloud arising from a boiling tea kettle is not actually steam, but droplets of liquid water that form as the
steam cools in the air.
Answer:
b
Explanation:
deposition is when water turns from gas to solid. b is the only one that fits
Deposition is frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.
What is deposition?Deposition is a process that involves collection of large mass or when mean distance between molecules are reduced. It can also be explained as gathering of substances together to form a larger mass.
Therefore, the phenomenon explained in the given example about deposition is frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.
Learn more about deposition here: https://brainly.com/question/6110024
A skydiver slows down from 65 m/s to 5 m/s by opening the parachute. If this
takes 0.75 seconds, what is the skydiver's acceleration?
A. 45 m/s2 up
B. 80 m/s2 up
C. 45 m/s2 down
D. 80 m/s2 down
Answer:
D. -80m/s^2
Explanation:
V = u + at
5 = 65 + a (0.75)
0.75a = -60
a = -60/0.75
a = -80m/s^2
Therefore, is decelerating at 80m/s^2
Answer:
[tex]\boxed {\boxed {\sf D. \ 80 \ m/s^2 \ down}}[/tex]
Explanation:
We are asked to find the acceleration of a skydiver. Acceleration is the change in velocity over the change in time, so the formula for calculating acceleration is:
[tex]a= \frac{v_f-v_i}{t}[/tex]
The skydiver was initially traveling 65 meters per second, then he slowed down to a final velocity of 5 meters per second. He slowed down in 0.75 seconds.
[tex]\bullet \ v_f = 5 \ m/s \\\bullet \ v_i= 65 \ m/s \\\bullet \ t= 0.75 \ s[/tex]
Substitute the values into the formula.
[tex]a= \frac{ 5 \ m/s - 65 \ m/s}{0.75 \ s}[/tex]
Solve the numerator.
[tex]a= \frac{-60 \ m/s}{0.75 \ s}[/tex]
Divide.
[tex]a= -80 \ m/s^2[/tex]
The acceleration of the skydiver is -80 meters per second squared or 80 meters per second squared down. The skydiver is slowing down or decelerating, so the acceleration is negative or down.
Cho biết độ tan của NH4Cl trong nước ở 20oC và 70oC lần lượt là 37,2 g/100 gam nước và 60,2 gam/100 g nước. Hòa tan 166,8 gam NH4Cl vào 400 gam nước ở 70oC thu được dung dịch X. Sau đó, hạ nhiệt độ dung dịch X xuống 20oC. Tính khối lượng (gam) NH4Cl kết tinh lại trong X?
Answer: Hợp chất CTHH 0 °C 10 °C 20 °C 30 °C 40 °C 50 °C 70 °C
Actini(III) hydroxide Ac(OH)3 0,0022
Amonia NH3 1176 900 702 565 428 333 188
Amoni azua NH4N3 16 25,3 37,1
View 42 more rows
hehe
PLEASE HELP ASAP
A total of 132.33g C3H8 is burned in 384.00 g O2. Use the following questions to determine the amounts of products formed.
• How many grams of CO2 and H2O will be produced? (2 points)
b. If the furnace is not properly adjusted, the products of combustion can include other gases, such as CO and unburned hydrocarbons. If only 269.34 g of CO2 were formed in the above reaction, what would the percent yield be? (2 points)
Not following hazardous material safety policies and procedures can result in which of
the following? (Select all that apply.)
a. Serious illnesses
b. Injury
c. Death
d. HIPAA violation
Answer:
A, B, C and D
Explanation:
It can result for all of the choices mentioned.
Not following safety and procedure for handling hazardous material results in illness, death, injury, and HIPAA violation. Thus, all options are correct.
The hazardous material safety policy and measures are the standards set by HIPAA for the safety and precautionary measures that have been followed for reducing personal risk.
The hazardous materials have been chemicals, gases, flammables, and explosives. The inappropriate handling and not following the standard procedure results in illness, injury, death, and HIPAA violation. Thus, all the options are correct.
For more information about the hazardous material, refer to the link:
https://brainly.com/question/3520802
ANSWER THESE QUESTIONS PLEASE
No spam!! :/
Answer:
By definition, a pure substance or a homogeneous mixture consists of a single phase. A heterogeneous mixture consists of two or more phases. When oil and water are combined, they do not mix evenly, but instead form two separate layers.
Explanation:
Sorry only knew the answer to the first question
Answer:
To make a saturated solution, 36 gm of sodium chloride is dissolved in 100 gm of water at 293 K. Find its concentration at this temperature.
Mass per cent is a way of expressing a concentration or describing the component in a particular mixture. The solution composition can be expressed in mass percentage that depicts the mass of solute present in a given mass of solution.
The quantity of solute is expressed in mass or by moles. For a solution, the mass per cent is described as the grams of solute per grams of solution, multiplied by 100 to get the percentage.
Concentration
Mass of sodium chloride (Solute) = 36gm
Mass of water (solvent) = 100 gm
Mass of solution = 36+100
∴ Mass of solution = 136 gm
Concentration = (Mass of Solute / Mass of Solution) * 100
Concentration = (36/136) × 100
Concentration = 26.47%
Temperature
If temperature increases, solubility increases and if temperature decreases, solubility decreases.
It is possible to distinguish the particles of solute from those of solvent in a suspension, since particle size is bigger in suspensions, hence it is easier to distinguish the particles of solute.
Explanation:
g aqueous barium hydroxide (ba(oh)2) and nitric acid (hno3) participate in a complete neutralization reaction. in the molecular equation, what are the products
Answer:
Where the products are H2O and Ba(NO3)2
Explanation:
A base, as, barium hydroxide (Ba(OH)2) reacts with an acid (HNO3), producing water (H2O), and the related salt (Ba(NO3)2) in a reaction called neutralization reaction.
The balanced reaction is:
Ba(OH)2 + 2 HNO3 → 2 H2O + Ba(NO3)2
Where the products are H2O and Ba(NO3)2
The decrease in the water table due to overuse of water.
Answer: Groundwater and surface water are connected. When groundwater is overused, the lakes, streams, and rivers connected to groundwater can also have their supply diminished. Land subsidence occurs when there is a loss of support below ground. This is most often caused by human activities, mainly from the overuse of groundwater, when the soil collapses, compacts, and drops.
Hope it Helps. :)
Determine whether each of the examples represents a colligative property or a non-colligative property. boiling point elevation Choose... color Choose... freezing point depression Choose... vapor pressure lowering Choose... density Choose...
Answer:
boiling point elevation - colligative property
color - non-colligative property
freezing point depression - colligative property
vapor pressure lowering - colligative property
density - non-colligative property
Explanation:
A colligative property is a property that depends on the number of particles present in the system.
Freezing point depression, boiling point elevation and vapour pressure lowering are all colligative properties of solutions.
Colour and density do not depend on the number of particles present hence they are not colligative properties.
The boiling point elevation, freezing point depression, and vapor pressure lowering are colligative properties. And color and density are non-colligative properties.
Explanation:
The colligative properties are the properties depending upon the number of particles of solute not on the nature of the solute.Example of colligative properties:Vapor pressure loweringElevation boiling pointDepression in freezing pointOsmotic pressureThe non-colligative properties are the properties depending upon the nature of solute and solvent.Example of non-colligative properties :ViscositySurface tensionDensitySolubilitySo, from this, we can conclude that boiling point elevation, freezing point depression, and vapor pressure lowering are colligative properties. And color and density are non-colligative properties.
Learn more about colligative properties here:
brainly.com/question/10323760?referrer=searchResults
brainly.com/question/4227527?referrer=searchResults
calcium is added to water,the liberated gas is
Answer:
In both cases, the gas evolved is H2. When calcium reacts with water the heat evolved is not suffcient for hydrogen to catch fire. On the other hand, sodium metal reacts with water violently and in this case a lot of heat is evolved which is sufficient for hydrogen to catch fire.
Explanation:
may this answer is helpful for you
Hydrogen
The reaction is given by
[tex]\boxed{\sf {Ca\atop Calcium}+{H_2O\atop Water}\longrightarrow {Ca(OH)_2\atop Calcium\:Hydroxide}+{H_2\atop Hydrogen}}[/tex]
Balanced equation:-
[tex]\boxed{\sf {Ca\atop Calcium}+{2H_2O\atop Water}\longrightarrow {Ca(OH)_2\atop Calcium\:Hydroxide}+{H_2\atop Hydrogen}}[/tex]
what is valency of an atom?
The number of replaceable electrons in an atom is called its valency.
Examples
Monovalent - HydrogenDivalent - OxygenValency = 8 - Number of electron in last shell [When number of electrons in last shell > 4]Valency = Number of electron in last shell [When number of electrons in last shell < 4]Thanks !
☺️☺️☺️☺️☺️☺️☺️
Answer:
the combining capacity if an atom is know as valency.
the property of an element that determines the number of other atimd with an aton if the element can combine.
What information does the first quantum number of an electron give?
A. The sublevel that the electron is in
B. The specific orbital the electron is in
C. The energy level the electron is in
D. The spin that the specific electron has
Answer:
с
Explanation:
the first quantum number of an electron gives the information about the energy level the electron is in
The information first quantum number of an electron give is the energy level the electron is in.
What are quantum numbers?Quantum numbers is a set of symbols which gives idea about the position of electron present inside an atom.
First quantum number is denoted by symbol 'n' which gives idea about the number of shell or energy level in which electron is present.The sublevel that the electron is in is the second quantum number denoted by symbol 'l'.The specific orbital in which electron is present is denoted by symbol 'm' and it is the third quantum number.The spin that the specific electron has is the forth quantum number and denoted by symbol 's'.Hence first quantum number of electron gives ideal about the energy level.
To know more about quantum numbers, visit the below link:
https://brainly.com/question/11575590
cesium-131 has a half life of 9.7 days. what percent of a cesium-131 sample remains after 60 days?
Explanation:
From the question given above, the following data were obtained:
Half-life (t½) = 9.7 days
Time (t) = 60 days
Percentage remaining after 60 days =?Next, we shall determine the number of half-lives that has elapsed. This can be obtained as follow:
Half-life (t½) = 9.7 days
Time (t) = 60 days
Number of half-lives (n) =?
n = t / t½
n = 60 / 9.7Finally, we shall determine the percentage remaining. This can be obtained as follow:
Let the original amount be N₀
Let the amount remaining be N
Number of half-lives (n) = 60 / 9.7
N = N₀ / 2ⁿ
Divide both side by N₀
N/N₀ = 1/2ⁿ
N/N₀ = 1 / 2⁽⁶⁰÷⁹•⁷⁾
N/N₀ = 0.0137
Multiply by 100 to express in percentage
N/N₀ = 0.0137 × 100
N/N₀ = 1.37%Therefore, the percentage remaining after 60 days is 1.37%
NOTE; N/N₀ is the fraction remaining.Learn more: https://brainly.com/question/14883322
Q1: A stock solution containing Mn+2 ions was prepared by dissolving 1.584 g pure manganese metal in nitric acid and diluting to a final volume of 1.000 L. The following solutions were then prepared by dilution: For solution A, 50.00 mL of stock solution was diluted to 1000.0 mL. For solution B, 10.00 mL of solution A was diluted to 250.0 mL. For solution C, 10.00 mL of solution B was diluted to 500.0 mL. Calculate the concentrations of the stock solution and solutions A, B, and C.
The concentration of a solution is the amount of solute in a solution.
We have from the question that he mass of manganese = 1.584 g
Hence;
Amount of [tex]Mn^2+[/tex] = 1.584 g/55g/mol = 0.0288 moles
Recall that;
Number of moles = concentration * volume
Let the concentration of the solution be C
0.0288 moles = C * 1 L
C = 0.0288 moles/ 1 L
C= 0.0288 mol/L
Hence concentration of stock solution = 0.0288 mol/L
For solution A
From the dilution formula;
C1V1 = C2V2
where;
C1 = initial concentration
C2 = final concentration
V1 = initial volume
V2= final volume
C1 = 0.0288 mol/L
V1 = 50.00 mL
C2 = ?
V2 = 1000.0 mL
C2 = 0.0288 mol/L * 50.00 mL/1000.0 mL
C2 = 0.00144 mol/L
Hence, concentration of solution A is 0.00144 mol/L
For solution B
C1V1 = C2V2
C1 = 0.00144 mol/L
V1 = 10.00 mL
C2 = ?
V2 = 250.0 mL
C2 = 0.00144 mol/L * 10.00 mL/250.0 mL
C2 = 0.0000576 mol/L
Hence, concentration of solution B is 0.0000576 mol/L
For solution C
C1 = 0.0000576 mol/L
V1 = 10.00 mL
C2 = ?
V2 = 500.0 mL
C2 = 0.0000576 mol/L * 10.00 mL/500.0 mL
C2= 0.000001152 mol/L
Hence, concentration of solution C is 0.000001152 mol/L
To learn more about concentration
https://brainly.com/question/13499062
state function and non state function
Answer:
State functions represent quantities or properties of a thermodynamic system, while non-state functions represent a process during which the state functions change. For example, the state function PV is proportional to the internal energy of an ideal gas, but the work W is the amount of energy transferred as the system performs work.
Explanation:
5 points ) Which of the following is a benefit of using email to communicate at work ? a) You can express yourself in a limited number of characters b) You don't have to worry about using proper grammar. c) You always get a response right away. d ) You can reach a large audience with one communication .
Answer:
C
Explanation:
What is the formula for tin (II) chlorate decahydrate?
Answer:
The formula is:
Sn(ClO3)2
Tin(II) Chlorate is also called stannous chlorate and is a white-colored solid. Hydrates are the addition of water molecules. Tin (II) chlorate decahydrate is represented by Sn(ClO₃)₂ . 10 H₂O.
What are hydrates?Hydrates are the chemical compounds used to represent the water molecule (H₂O) in a compound. The water molecules are added to the compound formula as a crystalline structure.
The element tin is represented by the symbol Sn and chlorate is represented as (ClO₃)₂. The formula also has decahydrate which means it has ten molecules of water that can be represented by 10 H₂O.
The stock nomenclature is used to give the formula for the compound. The overall formula of the compound after adding the individual symbol will give, Sn(ClO₃)₂. 10 H₂O.
Therefore, Sn(ClO₃)₂ . 10 H₂O is a formula for tin (II) chlorate decahydrate.
Learn more about hydrates here:
https://brainly.com/question/11202174
#SPJ2
Determine the value of the equilibrium constant for the following reaction, where the following amounts of each species are present at equilibrium in a 5.00 L container: 1.34 mol HCl, 4.30 mol O2, 30 g H2O, and 2.42 mol Cl2.
4 HCl(g) O2(g) ----> 2 H2O(l) 2 Cl2(g)
Explanation:
here's the answer to your question about
Kevin's supervisor, Jill, has asked for an update on today's sales, Jill is pretty busy moving back and forth between different store locations. How can Kevin most effectively deliver an update to her ? a) Call with a quick update Ob ) Send a detailed text message c ) Book a one-hour meeting for tomorrow morning d) Send a detailed email
Answer:
d
Explanation:
since it is much convenient since the email will not get lost and it's contents will not be forgotten
